Two-dimensional electroacoustic model of transducer array based on 1-3 piezocomposite materials.

An analytical model is presented to achieve simultaneous prediction of the elementary electroacoustic response and directivity pattern of a one-dimensional (1-D) piezocomposite array. The theoretical approach was based on guided wave theory in a multilayered structure in which the 1-3 piezocomposite material is considered as a homogeneous piezoelectric plate. A matrix method was applied to simulate the displacement fields generated at the surface of the array when one element was excited with an electrical pulse. A test device was manufactured, then characterized through measurements of displacement performed with an interferometric laser probe when the array vibrated in air and in water. The experimental results are presented and compared with theory.

Response of bare 1-3 piezocomposite array to localized electrical excitation.

The theoretical response of a 1-3 piezocomposite plate submitted to localized electrical excitation was studied with the theory of guided waves. The theoretical modeling was based on the global matrix method, and the piezocomposite material was considered as a homogeneous medium. To validate the theoretical results, experimental displacement measurements were performed with an interferometric probe on two piezocomposite plates, one with a single element and one with an array of electrodes. The measured response on the single-element plate was mainly supported by the S0 and S3 modes of the plate. Homogenization limits of the composite in terms of frequency and wave number are defined on the basis of data from this sample. Within these limits, the piezocomposite material operates as a homogeneous medium, and comparison between theoretical and experimental results allows the equivalent electroacoustic parameters to be evaluated. A second sample was measured to study the effects of the electrode array on the electroacoustic response of the plate. Two kinds of electrical excitation were studied.