Application of zeolites for radium removal from mine water.

For removal of radium from saline waters in Upper Silesian mines, several methods of purification have been developed. The most efficient one is based on application of barium chloride, which was implemented in full technical scale in two Polish coal mines several years ago. Very good results of purification have been achieved-the removal efficiency exceeding 95% of the initial activity. Another possibility for the removal of different ions from salty waters and brines is the application of zeolites. We found that technique as a very promising method for removal of not only radium isotopes from mine waters but also other ions (barium, iron, manganese). Treatment of several various water samples has been done to assess the removal efficiency for natural radionuclides. Preliminary results show very good effects for radium isotopes as well as for barium ions. In the paper, a short description of laboratory results of the purification of mine waters with application of synthetic zeolites is presented.

Evaluation of the impacts of mine drainage from a coal waste pile on the surrounding environment at Smolnica, southern Poland.

Mine drainage impacts from a coal waste pile at Smolnica, Poland have been monitored. Groundwater in an unconfined aquifer downgradient from the pile has near-neutral pH, but high concentrations of sulfate (up to 3,827 mg/l), chloride (up to 903 mg/l), and sodium (up to 2,606 mg/l). Concentrations of iron and manganese are elevated only locally, and concentrations of other metals are low. The behavior of sulfate seems to be conservative in the downgradient aquifer, and gypsum may only be precipitating locally. Concentrations of iron and manganese seem to be controlled by the precipitation of ferric oxide and hydroxides and rhodochrosite, respectively. Complete neutralization of mine drainage by carbonates is consistent with high concentrations of calcium (up to 470 mg/l) and magnesium (up to 563 mg/l) and also with high strontium concentrations of up to 3.08 mg/l, observed in groundwater downgradient from the pile. Hydraulic head profiles at two sites within the river bottom sediments indicate upward flow toward the river with large local differences in groundwater recharge. Water chemistry profiles in the river bottom sediments and geochemical modeling suggest conservative behavior of Na, Cl, and SO(4) and precipitation of Fe and Mn at the groundwater/river water interface. Mine drainage enters the Bierawka River and causes increasing sulfate concentrations. In contrast, concentrations of sodium and chloride in the Bierawka River decrease downgradient from the pile because water in the river upgradient from the pile is already highly contaminated by these species from the discharge of mining waters. Concentrations of Fe and Mn in the river water are low, as a consequence of the precipitation of Fe and Mn oxide and hydroxides. Direct geochemical modeling was able to reproduce measured concentrations of conservative species (e.g., Na, Cl, and SO(4)), but errors for metals and Ba were relatively large. In addition, calculated P(CO2) values in the river water are very high, suggesting that equilibrium with atmospheric P(CO2) and P(O2) has not been reached, and at least some reactions should be modeled as kinetic processes. High concentrations of Na, Cl, and SO(4) contribute to the contamination of the Odra River, which is joined by the Bierawka River farther downgradient, thus limiting the use of river water for recreation and other purposes.

Verification of the "first flush" phenomenon in mine water from coal mines in the Upper Silesian Coal Basin, Poland.

Case studies of Grodziec and Siersza mines in the Upper Silesian Coal Basin confirm that mine water accumulating in and over-flowing from abandoned coal mines is subject to a "first flush" phenomenon. The accumulated products of sulphide oxidation are dissolved in the rising mine water and flushed out at concentrations several times those observed during mine operation. Following the first overflow, sulphate concentration and hydrogen ion activity decay exponentially. In the case of workings in Siersza, decay constants of -0.003 to -0.005 day(-1) are observed, corresponding to flushing times of 480 to 820 days, some 10-20 times the period required for the workings to flood. Quantities of leachable sulphur in the abandoned workings of 0.02-0.03% are adequate to explain the observed concentrations of sulphate in the first flush, and this figure is tentatively supported by laboratory analyses.