Catalytic activity of glucose oxidase after dielectrophoretic immobilization on nanoelectrodes.

Dielectrophoresis (DEP) is an AC electrokinetic effect that is proven to be effective for the immobilization of not only cells, but also of macromolecules, for example, antibodies and enzyme molecules. In our previous work, we have already demonstrated the high catalytic activity of immobilized horseradish peroxidase after DEP. To evaluate the suitability of the immobilization method for sensing or research in general, we want to test it for other enzymes, too. In this study, glucose oxidase (GOX) from Aspergillus niger was immobilized on TiN nanoelectrode arrays by DEP. Fluorescence microscopy showed the intrinsic fluorescence of the immobilized enzymes flavin cofactor on the electrodes. The catalytic activity of immobilized GOX was detectable, but a fraction of less than 1.3% of the maximum activity that was expected for a full monolayer of immobilized enzymes on all electrodes was stable for multiple measurement cycles. Therefore, the effect of DEP immobilization on the catalytic activity strongly depends on the used enzyme.

Characterization of binding interactions of SARS-CoV-2 spike protein and DNA-peptide nanostructures.

Binding interactions of the spike proteins of the severe acute respiratory syndrome corona virus 2 (SARS-CoV-2) to a peptide fragment derived from the human angiotensin converting enzyme 2 (hACE2) receptor are investigated. The peptide is employed as capture moiety in enzyme linked immunosorbent assays (ELISA) and quantitative binding interaction measurements that are based on fluorescence proximity sensing (switchSENSE). In both techniques, the peptide is presented on an oligovalent DNA nanostructure, in order to assess the impact of mono- versus trivalent binding modes. As the analyte, the spike protein and several of its subunits are tested as well as inactivated SARS-CoV-2 and pseudo viruses. While binding of the peptide to the full-length spike protein can be observed, the subunits RBD and S1 do not exhibit binding in the employed concentrations. Variations of the amino acid sequence of the recombinant full-length spike proteins furthermore influence binding behavior. The peptide was coupled to DNA nanostructures that form a geometric complement to the trimeric structure of the spike protein binding sites. An increase in binding strength for trimeric peptide presentation compared to single peptide presentation could be generally observed in ELISA and was quantified in switchSENSE measurements. Binding to inactivated wild type viruses could be shown as well as qualitatively different binding behavior of the Alpha and Beta variants compared to the wild type virus strain in pseudo virus models.

Activity of AC electrokinetically immobilized horseradish peroxidase.

Dielectrophoresis (DEP) is an AC electrokinetic effect mainly used to manipulate cells. Smaller particles, like virions, antibodies, enzymes, and even dye molecules can be immobilized by DEP as well. In principle, it was shown that enzymes are active after immobilization by DEP, but no quantification of the retained activity was reported so far. In this study, the activity of the enzyme horseradish peroxidase (HRP) is quantified after immobilization by DEP. For this, HRP is immobilized on regular arrays of titanium nitride ring electrodes of 500 nm diameter and 20 nm widths. The activity of HRP on the electrode chip is measured with a limit of detection of 60 fg HRP by observing the enzymatic turnover of Amplex Red and H2 O2 to fluorescent resorufin by fluorescence microscopy. The initial activity of the permanently immobilized HRP equals up to 45% of the activity that can be expected for an ideal monolayer of HRP molecules on all electrodes of the array. Localization of the immobilizate on the electrodes is accomplished by staining with the fluorescent product of the enzyme reaction. The high residual activity of enzymes after AC field induced immobilization shows the method's suitability for biosensing and research applications.

AC electrokinetic immobilization of influenza virus.

The use of alternating current (AC) electrokinetic forces, like dielectrophoresis and AC electroosmosis, as a simple and fast method to immobilize sub-micrometer objects onto nanoelectrode arrays is presented. Due to its medical relevance, the influenza virus is chosen as a model organism. One of the outstanding features is that the immobilization of viral material to the electrodes can be achieved permanently, allowing subsequent handling independently from the electrical setup. Thus, by using merely electric fields, we demonstrate that the need of prior chemical surface modification could become obsolete. The accumulation of viral material over time is observed by fluorescence microscopy. The influences of side effects like electrothermal fluid flow, causing a fluid motion above the electrodes and causing an intensity gradient within the electrode array, are discussed. Due to the improved resolution by combining fluorescence microscopy with deconvolution, it is shown that the viral material is mainly drawn to the electrode edge and to a lesser extent to the electrode surface. Finally, areas of application for this functionalization technique are presented.

Protein dielectrophoresis: Key dielectric parameters and evolving theory.

Globular proteins exhibit dielectrophoresis (DEP) responses in experiments where the applied field gradient factor ∇E2 appears far too small, according to standard DEP theory, to overcome dispersive forces associated with the thermal energy kT of disorder. To address this a DEP force equation is proposed that replaces a previous empirical relationship between the macroscopic and microscopic forms of the Clausius-Mossotti factor. This equation relates the DEP response of a protein directly to the dielectric increment δε+ and decrement δε- that characterize its ß-dispersion at radio frequencies, and also indirectly to its intrinsic dipole moment by way of providing a measure of the protein's effective volume. A parameter Γpw , taken as a measure of cross-correlated dipole interactions between the protein and its water molecules of hydration, is included in this equation. For 9 of the 12 proteins, for which an evaluation can presently be made, Γpw has a value of ≈4600 ± 120. These conclusions follow an analysis of the failure of macroscopic dielectric mixture (effective medium) theories to predict the dielectric properties of solvated proteins. The implication of a polarizability greatly exceeding the intrinsic value for a protein might reflect the formation of relaxor ferroelectric nanodomains in its hydration shell.

Dielectrophoretic Immobilization of Yeast Cells Using CMOS Integrated Microfluidics.

This paper presents a dielectrophoretic system for the immobilization and separation of live and dead cells. Dielectrophoresis (DEP) is a promising and efficient investigation technique for the development of novel lab-on-a-chip devices, which characterizes cells or particles based on their intrinsic and physical properties. Using this method, specific cells can be isolated from their medium carrier or the mixture of cell suspensions (e.g., separation of viable cells from non-viable cells). Main advantages of this method, which makes it favorable for disease (blood) analysis and diagnostic applications are, the preservation of the cell properties during measurements, label-free cell identification, and low set up cost. In this study, we validated the capability of complementary metal-oxide-semiconductor (CMOS) integrated microfluidic devices for the manipulation and characterization of live and dead yeast cells using dielectrophoretic forces. This approach successfully trapped live yeast cells and purified them from dead cells. Numerical simulations based on a two-layer model for yeast cells flowing in the channel were used to predict the trajectories of the cells with respect to their dielectric properties, varying excitation voltage, and frequency.

Protein Dielectrophoresis: I. Status of Experiments and an Empirical Theory.

The dielectrophoresis (DEP) data reported in the literature since 1994 for 22 different globular proteins is examined in detail. Apart from three cases, all of the reported protein DEP experiments employed a gradient field factor ∇Em2 that is much smaller (in some instances by many orders of magnitude) than the ~4 1021 V2/m3 required, according to current DEP theory, to overcome the dispersive forces associated with Brownian motion. This failing results from the macroscopic Clausius-Mossotti (CM) factor being restricted to the range 1.0 > CM > -0.5. Current DEP theory precludes the protein's permanent dipole moment (rather than the induced moment) from contributing to the DEP force. Based on the magnitude of the ß-dispersion exhibited by globular proteins in the frequency range 1 kHz-50 MHz, an empirically derived molecular version of CM is obtained. This factor varies greatly in magnitude from protein to protein (e.g., ~37,000 for carboxypeptidase; ~190 for phospholipase) and when incorporated into the basic expression for the DEP force brings most of the reported protein DEP above the minimum required to overcome dispersive Brownian thermal effects. We believe this empirically-derived finding validates the theories currently being advanced by Matyushov and co-workers.

AC electrokinetic immobilization of organic dye molecules.

The application of inhomogeneous AC electric fields for molecular immobilization is a very fast and simple method that does not require any adaptions to the molecule's functional groups or charges. Here, the method is applied to a completely new category of molecules: small organic fluorescence dyes, whose dimensions amount to only 1 nm or even less. The presented setup and the electric field parameters used allow immobilization of dye molecules on the whole electrode surface as opposed to pure dielectrophoretic applications, where molecules are attracted only to regions of high electric field gradients, i.e., to the electrode tips and edges. In addition to dielectrophoresis and AC electrokinetic flow, molecular scale interactions and electrophoresis at short time scales are discussed as further mechanisms leading to migration and immobilization of the molecules. Graphical Abstract.

Dielectrophoretic Stretching of DNA.

The spatial control of DNA and of self-assembled DNA constructs is a prerequisite for the preparation of DNA-based nanostructures and microstructures and a useful tool for studies on single DNA molecules. Here we describe a protocol for the accumulation of dissolved λ-DNA molecules between planar microelectrodes by the action of inhomogeneous radiofrequency electric fields. The resulting AC electrokinetic forces stretch the DNA molecules and align them parallel to the electric field. The electrode preparation from off-the-shelf electronic components is explained, and a detailed description of the electronic setup is given. The experimental procedure is controlled in real-time by fluorescence microscopy .

Electrode-based AC electrokinetics of proteins: A mini-review.

Employing electric phenomena for the spatial manipulation of bioparticles from whole cells down to dissolved molecules has become a useful tool in biotechnology and analytics. AC electrokinetic effects like dielectrophoresis and AC electroosmosis are increasingly used to concentrate, separate and immobilize DNA and proteins. With the advance of photolithographical micro- and nanofabrication methods, novel or improved bioanalytical applications benefit from concentrating analytes, signal enhancement and locally controlled immobilization by AC electrokinetic effects. In this review of AC electrokinetics of proteins, the respective studies are classified according to their different electrode geometries: individual electrode pairs, interdigitated electrodes, quadrupole electrodes, and 3D configurations of electrode arrays. Known advantages and disadvantages of each layout are discussed.

Aligned Immobilization of Proteins Using AC Electric Fields.

Protein molecules are aligned and immobilized from solution by AC electric fields. In a single-step experiment, the enhanced green fluorescent proteins are immobilized on the surface as well as at the edges of planar nanoelectrodes. Alignment is found to follow the molecules' geometrical shape with their longitudinal axes parallel to the electric field. Simultaneous dielectrophoretic attraction and AC electroosmotic flow are identified as the dominant forces causing protein movement and alignment. Molecular orientation is determined by fluorescence microscopy based on polarized excitation of the proteins' chromophores. The chromophores' orientation with respect to the whole molecule supports X-ray crystal data.

Dielectrophoretic immobilization of proteins: Quantification by atomic force microscopy.

The combination of alternating electric fields with nanometer-sized electrodes allows the permanent immobilization of proteins by dielectrophoretic force. Here, atomic force microscopy is introduced as a quantification method, and results are compared with fluorescence microscopy. Experimental parameters, for example the applied voltage and duration of field application, are varied systematically, and the influence on the amount of immobilized proteins is investigated. A linear correlation to the duration of field application was found by atomic force microscopy, and both microscopical methods yield a square dependence of the amount of immobilized proteins on the applied voltage. While fluorescence microscopy allows real-time imaging, atomic force microscopy reveals immobilized proteins obscured in fluorescence images due to low S/N. Furthermore, the higher spatial resolution of the atomic force microscope enables the visualization of the protein distribution on single nanoelectrodes. The electric field distribution is calculated and compared to experimental results with very good agreement to atomic force microscopy measurements.

Dielectric measurements of aqueous DNA solutions up to 110 GHz.

A measurement system for broadband dielectric spectroscopy of biological samples for frequencies between 25 MHz and 110 GHz is presented. It is based on a vector network analyzer and a 1.19 mm-diameter open-ended coaxial probe. Complex reflection coefficients of aqueous Na-DNA solutions are measured in the frequency domain at a constant temperature of 25 °C. Complex permittivity spectra are analysed at various solute concentrations and two dispersions are observed. The first one is located at about 19 GHz and is due to the reorientation of water molecules. The second one is located at approximately 100 MHz and is interpreted as being caused by DNA counterion fluctuations. The relaxation frequency of free water in solutions appears to be practically unaffected by the presence of DNA. For the relaxation in the MHz region the dielectric loss maximum shifts to higher frequencies and the distribution of relaxation times becomes broader with increasing polymer concentration.

Dynamics of linear poly(N-isopropylacrylamide) in water around the phase transition investigated by dielectric relaxation spectroscopy.

The molecular dynamics of linear poly(N-isopropylacrylamide) (pNIPAM) in aqueous media at temperatures below and above the lower critical solution temperature (LCST) are investigated using broadband dielectric relaxation spectroscopy in a frequency range from 10(-1) to 10(11) Hz. Below the LCST, two relaxation processes are observed in the megahertz and gigahertz region assigned to the reorientation of dipoles of the solvated polymer segments (p-process) and water molecules (w-process), respectively. Both relaxation processes are analyzed using the Havriliak-Negami (HN) function, taking special attention to the w-process. Above the LCST, the dielectric spectra of the pNIPAM solutions resemble that of pure water, showing only the high frequency relaxation process of the water molecules with a more or less Debye-type behavior. The non-Debye behavior of the w-process below the LCST is mainly induced by the interactions between water and pNIPAM chains via hydrogen bonding. The relaxation time and strength of the w-process is studied with dependence on the concentration, temperature, and the polymer chain length (molecular weight). The information obtained is useful for a deeper understanding of the dehydration behavior at the phase transition. The suggestion of dehydration of the pNIPAM chains at the LCST is confirmed by calculating a dehydration number.

Dielectrophoretic immobilisation of antibodies on microelectrode arrays.

A silicon based chip device with a regular array of more than 100,000 cylindrical sub-microelectrodes has been developed for the dielectrophoretic (DEP) manipulation of nanoparticles and molecules in solution. It was fabricated by a standard CMOS (complementary metal oxide semiconductor) compatible process. The distribution of the electrical field gradient was calculated to predict the applicability of the setup. Heating due to field application was determined microscopically using a temperature sensitive fluorescent dye. Depending on voltage and frequency, temperature increase was found to be compatible with protein function. Successful field controlled immobilisation of biomolecules from solution was demonstrated with the autofluorescent protein R-phycoerythrin (RPE) and with fluorescently labelled IgG antibodies. Biological activity after DEP application was proven by immobilisation of an anti-RPE antibody and subsequent binding of RPE. These results demonstrate that the developed chip system allows the directed immobilisation of proteins onto microelectrodes by dielectrophoresis without the need for any chemical modification and that protein function is preserved. Being based on standard lithographical methods, further miniaturisation and on-chip integration of electronics towards a multiparameter single cell analysis system appear near at hand.

Functionality of dielectrophoretically immobilized enzyme molecules.

The enzyme horseradish peroxidase has been immobilized on nanoelectrode arrays by alternating current dielectrophoresis (DEP). Preservation of its enzymatic function after field application was demonstrated by oxidizing dihydrorhodamine 123 with hydrogen peroxide as co-oxidant to create its fluorescent form, rhodamine 123 (Rh123). Localization of the fluorescently labeled enzyme and its product was conducted by fluorescence microscopy. Nanoelectrodes were prepared as tungsten pins arranged in square arrays. Experimental parameters for dielectrophoretic immobilization were optimized for even enzyme distribution and for enzymatic efficiency. Enzyme activity was quantified by determination of fluorescence intensities of immobilized enzyme molecules and of Rh123 produced. These results demonstrate that DEP can be applied to immobilize enzyme molecules while retaining their activity and rendering any chemical modifications unnecessary. This introduces a novel way for the preparation of bioactive surfaces for processes such as biosensing.

DNA-nanostructure-assembly by sequential spotting.

BACKGROUND: The ability to create nanostructures with biomolecules is one of the key elements in nanobiotechnology. One of the problems is the expensive and mostly custom made equipment which is needed for their development. We intended to reduce material costs and aimed at miniaturization of the necessary tools that are essential for nanofabrication. Thus we combined the capabilities of molecular ink lithography with DNA-self-assembling capabilities to arrange DNA in an independent array which allows addressing molecules in nanoscale dimensions. RESULTS: For the construction of DNA based nanostructures a method is presented that allows an arrangement of DNA strands in such a way that they can form a grid that only depends on the spotted pattern of the anchor molecules. An atomic force microscope (AFM) has been used for molecular ink lithography to generate small spots. The sequential spotting process allows the immobilization of several different functional biomolecules with a single AFM-tip. This grid which delivers specific addresses for the prepared DNA-strand serves as a two-dimensional anchor to arrange the sequence according to the pattern. Once the DNA-nanoarray has been formed, it can be functionalized by PNA (peptide nucleic acid) to incorporate advanced structures. CONCLUSIONS: The production of DNA-nanoarrays is a promising task for nanobiotechnology. The described method allows convenient and low cost preparation of nanoarrays. PNA can be used for complex functionalization purposes as well as a structural element.

Fluid streaming above interdigitated electrodes in dielectrophoresis experiments.

For the investigation of alternating current electrokinetic effects, a system is presented that allows for the simultaneous observation of fluid flow above and around microelectrodes in all three directions in space. Beside the usual microscopical view from top, lateral observation through the same objective is made possible by two small mirrors that are placed next to the electrodes. Fluid flow and movement of fluorescent nanoparticles above interdigitated electrodes are monitored by fluorescence microscopy and digital imaging and are further analysed by image processing. Field frequencies are varied from 10 Hz to 1 GHz at up to 10V(rms) . Electrical conductivity of the fluid is monitored in situ in the actual measuring chamber.

Preparation of DNA nanostructures with repetitive binding motifs by rolling circle amplification.

A long one-dimensional single-stranded DNA (ssDNA) molecule with a periodic sequence motif is an attractive building block for DNA nanotechnology because it allows the positioning of oligonucleotide-labeled particles or molecules with high spatial resolution via molecular self-assembly simply by hybridization reactions. In vitro enzymatic isothermal rolling circle amplification (RCA) produces such long concatemeric ssDNA molecules. These are complementary in sequence to their circular template. In this chapter, the preparation of stretched and surface-attached RCA products at the single molecule level is described. The methods presented comprise the enzymatic circularization of a ssDNA oligonucleotide, the covalent coupling of amino-modified primers to carboxylated fluorescence beads, the preparation of a hydrophobic glass substrate, the RCA in a flow-through system, the postsynthetic staining and stretching of the RCA products as well as the microscopic observation of individual ssDNA molecules.

Dielectrophoresis of DNA: Quantification by impedance measurements.

Dielectrophoretic properties of DNA have been determined by measuring capacitance changes between planar microelectrodes. DNA sizes ranged from 100 bp to 48 kbp, DNA concentrations from below 0.1 to 70 mugml. Dielectrophoretic spectra exhibited maximum response around 3 kHz and 3 MHz. The strongest response was found for very long DNA (above 10 kbp) and for short 100 bp fragments, which corresponds to the persistence length of DNA. The method allows for an uncomplicated, automatic acquisition of the dielectrophoretic properties of submicroscopical objects without the need for labeling protocols or optical accessibility.