Effects of minimally invasive surgical and miniscrew-assisted rapid palatal expansion (MISMARPE) on the nasal cavity and upper airway: a comparative cohort study.

This study was performed to evaluate the impact on the upper airway and nasal cavity of a new minimally invasive surgical and miniscrew-assisted rapid palatal expansion (MISMARPE) technique for the treatment of adult patients with transverse maxillary deficiency, in comparison to surgically assisted rapid palatal expansion (SARPE). Computed tomography scans of 21 MISMARPE and 16 SARPE patients were obtained preoperatively (T0) and at the end of the activation period (T1) and analysed. Linear and volumetric measurements were performed in the dental, alveolar, nasal cavity, and oropharynx regions. Generalised estimating equations were used to consider the intervention time and surgery type, and their interaction. In both groups, measurements were increased at T1 (P < 0.001), except for oropharynx volume (P > 0.05). A greater expansion in nasal cavity floor and median palatal suture was shown for MISMARPE when compared to SARPE (P < 0.001), with the same degree of expander activation (P = 0.094). A trapezoidal (coronal plane) and 'V' shape (axial plane) expansion pattern, was observed after MISMARPE. Both surgical techniques were effective for maxillary expansion in adults. However, MISMARPE was performed without osteotomy of the pterygomaxillary suture, in an outpatient setting and with local anaesthesia.

Treatment of painful temporomandibular joint disc displacement without reduction: network meta-analysis of randomized clinical trials.

There is currently no consensus on the best treatment for painful temporomandibular disc displacement without reduction (DDwoR), and no network meta-analysis (NMA) of randomized clinical trials (RCTs) comparing all types of treatments for this condition has been conducted. The objective of this study was to compare and rank all treatments for DDwoR, including conservative treatments, occlusal splints, low-level laser therapy (LLLT), arthrocentesis (Arthro) alone, Arthro plus intra-articular injection (IAI) of platelet-rich plasma (PRP), Arthro plus IAI of hyaluronic acid (HA), Arthro with exercises, Arthro plus occlusal splints, and manipulative therapy. Outcome variables were pain intensity on a visual analogue scale (VAS) and maximum mouth opening (MMO, mm). The mean difference with 95% confidence interval was estimated using Stata software. The GRADE system was used to assess the certainty of the evidence. A total of 742 patients from 16 RCTs were included in the NMA. Both direct meta-analysis and NMA showed that Arthro with IAI of co-adjuvants provided better pain reduction in the short term (≤3 months) than Arthro alone. However, the quality of the evidence was very low. In the intermediate term, Arthro alone or combined with co-adjuvants provided better pain reduction than conservative treatment, but with low-quality evidence. Conservative treatment significantly increased MMO in the short term compared to other treatments. In conclusion, the results of this NMA suggest that arthrocentesis with intra-articular injection of adjuvant medications may be superior to conservative treatments in reducing pain intensity at long-term follow-up, while no significant differences were found for the MMO outcome. However, the quality of evidence was generally low to very low, and further RCTs are needed to confirm these findings.

Virtual surgical planning in orthognathic surgery with the use of patient-specific plates compared with conventional plates. A systematic review focusing on complications, financial expenses, professional and patient-reported outcome measures.

BACKGROUND: Orthognathic surgery is a well-known surgical procedure for correction of facial deformities. The surgical procedure is performed by the use of conventional plates and by patient-specific osteosynthesis plates (PSOPs). The aim of this study is to investigate any differences in complications, financial expenses, professional and patient-reported outcome measures (PROM) in orthognathic surgery performed by conventional plates and by PSOPs. MATERIAL AND METHODS: A MEDLINE (PubMed), Embase, and Cochrane Library search was conducted. Human studies published in English through August 27, 2020 were included. Grey literature, unpublished literature as well as other databases like Scopus, Google Scholar, or Research Gate were also included in the search strategy of the present systematic review. Randomized and controlled clinical trials were included. Risk of bias was assessed by Cochrane risk of bias tool and Newcastle-Ottawa Scale. RESULTS: Five studies with unclear risk of bias and moderate quality were included. Meta-analysis was not applicable due to considerable heterogeneity. There was no significant difference in intra- and postoperative complications or professional and PROM with the two treatment modalities, although higher tendencies to reoperations were observed with conventional plates. Financial expenses were significantly higher with PSOP, but treatment planning and intraoperative time were shortened by approximately one third compared with mock surgery and conventional plates. CONCLUSIONS: No significant differences were observed in complications, professional and PROM. Higher financial expenses were recorded in orthognathic surgery performed with PSOP. Treatment planning and intraoperative time were shortened with the use of conventional plates. Although further randomized trials are needed before definite conclusions can be provided about beneficial use of PSOPs in orthognathic surgery from a professional and patient perspective.

Relapse-related factors of Le Fort I osteotomy in cleft lip and palate patients: A systematic review and meta-analysis.

A systematic review search was based on the PICOS approach, as follows: population: cleft lip and palate patients; intervention: Le Fort I osteotomy; comparator: different surgical protocols; outcome: stability, recurrence or surgical complications; study designs: only case reports were excluded from the review. No restrictions were placed on language or year of publication. Risk of bias was analyzed, heterogeneity was assessed, and subgroup analysis was performed using a level of significance of 1% (p = 0.01). The search identified 248 citations, from which 29 studies were selected and a total of 797 patients enrolled. The level of agreement between the authors was considered excellent (k = 0.810 for study selection and k = 0.941 for study eligibility). Our results reported a mean maxillary advancement of 5.69 mm, a mean vertical downward/upward of 2.85/-2.02 mm and a mean clockwise rotation of 4.15°. Greater surgical relapse rates were reported for vertical downward movement (-1.13 mm, 39.6%), followed by clockwise rotation (-1.41°, 33.9%), sagittal (-0.99 mm, 17.4%) and vertical upward (0.11 mm, 5.4%) movements. No relevance was found regarding the type of cleft, the type of Le Fort I osteotomy, concomitant bone grafting, surgical overcorrection, postoperative rigid or elastic intermaxillary fixation, or retention splint. Study limitations were heterogeneity and the low number of high-quality studies. In spite of reported high relapse rates, Le Fort I osteotomy for maxillary reposition is the first-choice procedure for selected cleft lip and palate patients in whom extensive maxillary movements are not required, because of its safety and its three-dimensional movement versatility in one-step surgery. Otherwise, distraction osteogenesis should be considered as the gold standard treatment.

Stability and surgical complications of tooth-borne and bone-borne appliances in surgical assisted rapid maxillary expansion: a systematic review.

The objective of this systematic review was to evaluate the stability and complications of tooth-borne (TB), bone-borne (BB) and hybrid (TB-BB) appliances in surgically assisted rapid maxillary expansion (SARME). Database searches were conducted (PubMed, Embase, Cochrane Library and SciELO), as well as a grey literature search (Google Scholar) and hand searches of reference lists. Forty-six articles were included after study selection (κ=0.854). After eligibility assessment, 16 articles and one article from the grey literature were processed (κ=0.866) and six articles were selected by hand searching, for a total of 23 articles included. Regarding stability, TB appliances showed width relapse rates ranging from 4 to 35% in canines, from 1 to 37% in premolars and from 0.2 to 49.5% in molars. In BB appliances, width relapse rates were 1.7-21% in canines, 1.5% in premolars and 4.6-11.5% in molars. In hybrid appliances, the width relapse rate was 14% in premolars, with a 1.8% overexpansion reported in the molar region. In TB and BB appliances, skeletal relapse rates were similar on the nasal floor (11-53% and 41.6%, respectively) and at the level of the maxilla (18% and 16%, respectively). The most common complications were bone resorption in TB appliances (18.14%) and appliance-related complications in BB appliances (17.9%). The risk of bias was high in 19 studies, medium in three studies and low in one study. The TB and BB appliances used in SARME were considered to have a high long-term stability. BB appliances appeared to have fewer relapses than TB appliances due to a more parallel distribution of forces exerted. However, relapse appears to be highly influenced by postorthodontic treatments, where arch-form coordination is achieved in the consolidation period with the purpose of overexpansion correction, alignment and final vertical adjustments. Further randomised controlled trials with long-term data and large sample sizes are needed to support evidence-based clinical decision-making and to allow meta-analytic studies of stability outcomes regarding the type of anchorage in SARME.

Minimally invasive intraoral proportional condylectomy with a three-dimensionally printed cutting guide.

The aim of this study was to describe the steps of a minimally invasive surgical technique used to perform a proportional intraoral condylectomy with a three-dimensionally (3D) printed cutting guide. The technique consists of two steps: virtual surgical planning and intraoral condylectomy. During virtual surgical planning, the mandibular ramus was measured bilaterally, the height of the proportional condylectomy was planned virtually, and a cutting guide was 3D printed. In the intraoral condylectomy, the mandibular condyle was approached intraorally, the 3D printed cutting guide was positioned in the sigmoid notch, and the proportional condylectomy was performed. The protocol reported in this technical note is the sum of knowledge acquired from a series of studies published previously by the authors, who have jointly developed a surgical technique that is both minimally invasive and accurate for the treatment of condylar hyperplasia.

Relevance of 3D virtual planning in predicting bony interferences between distal and proximal fragments after sagittal split osteotomy.

After sagittal split osteotomy, the mandibular distal and proximal fragments do not always align themselves passively to one another, resulting in bony interferences and subsequent anomalous settlement of the condyles. Predicting these interferences could be an important ancillary procedure for avoiding intra- and postoperative surgical complications, rendering orthognathic surgery more effective and safer. This study evaluated the relevance of virtual surgical planning in assessing the displacement of the proximal segments after virtual distal segment repositioning, for predicting bony interferences between the segments and thus avoiding related intra- and postoperative surgical complications. The presence of interferences between the distal and proximal segments was compared between virtually predicted (computer-assisted simulation surgery, Dolphin software) and real cases in 100 consecutive patients diagnosed with dentofacial deformities who underwent orthognathic surgery with mandibular repositioning (using a short lingual osteotomy (SLO)). The results indicated that clockwise rotation of the mandible was the mandibular movement most prone to segment interference. Furthermore, virtual planning was sensitive (100%) but had low specificity (51.6%) in predicting proximal and distal segment interferences. This low specificity was due to the software-based automated design of the mandibular osteotomy, where the length of the distal segment was longer than the real SLO, and the mandibular ramus sagittal split was located just behind Spix's spine. Thus, more precise simulated osteotomies are needed to further validate the accuracy of virtual planning for this purpose.

Hierarchy of surgical stability in orthognathic surgery: overview of systematic reviews.

The purpose was to perform an overview of systematic reviews in order to create a hierarchical scale of stability in orthognathic surgery with the aid of the highest level of scientific evidence. The systematic search was conducted in the PubMed, Embase, and Cochrane Library databases. The grey literature was investigated in Google Scholar and a manual search was done of the references lists of included studies. Fifteen studies were included in the final sample, of which eight were systematic reviews and seven were meta-analyses. These were assessed for methodological quality using the AMSTAR 2 tool and all were considered to be of medium to high methodological quality. The clinical studies included in the 15 reviews and meta-analyses were classified by the review authors as having a moderate to high potential for risk of bias. The hierarchical pyramid of stability in orthognathic surgery was established, with two surgical procedures considered highly unstable: (1) maxillary expansion with semi-rigid internal fixation evaluated at the dental level in the posterior region, and (2) clockwise rotation of the mandible with rigid internal fixation of bicortical screws in the sagittal direction.

Stability and surgical complications in segmental Le Fort I osteotomy: a systematic review.

This systematic review was conducted to evaluate the stability and surgical complications of segmental Le Fort I osteotomy. The search was divided into a main search (PubMed, Embase, and Cochrane Library), grey literature search (Google Scholar), and manual search. Twenty-three studies were included: 14 evaluating stability as the outcome and nine evaluating surgical complications. The level of agreement between the authors was considered excellent (κ=0.893 for study selection and κ=0.853 for study eligibility). The segmental Le Fort I osteotomy provides stable outcomes in the sagittal plane, is less stable dentally than skeletally in the transverse plane, and provides little stability in the posterior segment after downward movement. The most frequent complications are oral fistula (six studies) and damage to the adjacent teeth (five studies), but the most prevalent complication is postoperative infection (32.62%). Four studies evaluating stability as the outcome showed a medium potential risk of bias, whereas all studies addressing surgical complications showed a high potential risk of bias. The segmental Le Fort I osteotomy should not be excluded from the technical armamentarium in orthognathic surgery. On the contrary, the literature consulted suggests it to be a useful tool for the three-dimensional surgical correction of maxillary malposition.

Assessing change in quality of life using the Oral Health Impact Profile (OHIP) in patients with different dentofacial deformities undergoing orthognathic surgery: a before and after comparison.

Dentofacial deformities and their treatment have physical and psychological repercussions on quality of life (QOL). Seventy-four patients were evaluated preoperatively (T0) and at 4-6 months postoperatively (T1). Oral health-related QOL was assessed using the short form of the Oral Health Impact Profile (OHIP-14). There was a statistically significant reduction in the average overall OHIP-14 score between T0 (13.23±6.45) and T1 (3.26±4.19). In addition, there were significant decreases in all seven OHIP-14 domains. Class III patients benefited in all domains evaluated, while a significant improvement was seen only in the psychological disability domain for class I patients. Class II patients showed a significant benefit in all domains except the domain of functional limitation. With regard to the total sample (n=74) and class III patients (n=58), correlations between domains were identified for all domains. The same correlation was not identified for class I (n=5) and II (n=11) patients. The entire sample and class III patients showed significant improvements in OHIP-14 scores for all degrees of postoperative sensory disturbance in the upper and lower lips, except for patients with degree 5 (extreme) disturbance of the upper lip. Orthognathic surgical treatment had a positive impact on oral health-related QOL in the patients evaluated.