ABSTRACT
The microbial analysis of fish is critical for ensuring overall health. Uncooked fish can serve as a conduit for transmitting several types of microbes; the current investigation sought to assess the bacterial levels in various kinds of fish from Nasser Lake, Aswan, Egypt, considered the chief source of potable water in Egypt. Two hundred and fifty fish samples, including 50 of each Oreochromis niloticus, Sander lucioperca, Lates niloticus, Clarias gariepinus, and Mormyrus kannume, from Nasser Lake, Aswan, Egypt, were collected to detect the bacterial load, isolation, and identification of Aeromonas hydrophila, Pseudomonas aeruginosa, and Vibrio parahaemolyticus and their virulence genes. The findings revealed that Oreochromis niloticus and Clarias gariepinus exhibited higher bacterial loads than other fish species. Incidences of bacterial contamination among examined fishes were 28.8%, 20.4%, and 16% for Aeromonas hydrophila, Pseudomonas aeruginosa, and Vibrio parahaemolyticus, respectively. Additionally, PCR analysis detected the presence of aerA (60%) and Act (40%) genes in A. hydrophila, rpoB (70%) and LasB (30%) genes in P. aeruginosa, and ToxR (70%) and tdh (50%) genes in V. parahaemolyticus. The study suggested that the bacterial contamination levels in Oreochromis niloticus and Clarias gariepinus could be notably more significant than in other species that could potentially be harmful to the consumers, especially considering the identification of particular bacteria known to cause foodborne illnesses. Further recommendations emphasized that regular monitoring and assessments are required to preserve their quality.
ABSTRACT
One of the most common features of many different clinical conditions is pain; hence, there is a crucial need for eliminating or reducing it to a tolerable level to retrieve physical, psychological and social functioning. A first derivative synchronous spectrofluorimetry technique is proposed for the simultaneous determination of celecoxib and tramadol HCl, a recent coformulation authorized for treating acute pain in adults. The method includes using synchronous spectrofluorimetry at ∆λ = 80 nm where tramadol HCl was determined using first derivative technique at λ = 230.2 nm, while celecoxib was determined at λ = 288.24 nm. The proposed method was successfully applied to their co-formulated dosage forms in addition to spiked human plasma and validated in agreement with the guidelines of the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use (ICH). The linear ranges were found to be 0.50-5.0 and 0.15-0.50, the limits of detection to be 0.088 and 0.011 and the limits of quantification to be 0.266 and 0.032 µg/ml for celecoxib and tramadol, respectively. Statistical analysis revealed no significant difference when compared with previously reported methods as evidenced by the values of the variance ratio F-test and Student t-test. The proposed method was successfully applied to commercial dosage forms and spiked human samples. Moreover, the greenness of the proposed method was investigated based on the analytical eco-scale approach, with the results showing an excellent green scale with a score of 95.
Subject(s)
Celecoxib , Spectrometry, Fluorescence , Tramadol , Celecoxib/blood , Celecoxib/analysis , Tramadol/blood , Tramadol/analysis , Humans , Spectrometry, Fluorescence/methods , TabletsABSTRACT
Using the unique structures found in natural materials to produce new antibacterial drugs is crucial. Actinobacteria is well-known for its ability to produce naturally occurring chemicals with a variety of structural features that can be used as weapons against infectious bacteria. In the present study, the Streptomyces coeruleorubidus metabolites were characterized and their efficacy in suppressing Streptococcus agalactiae growth was carried out both in vitro and in vivo. The metabolites of S. coeruleorubidus were purified and identified as octasiloxane-hexadecamethyl (OHM). In vivo antibacterial activity of OHM revealed an inhibitory minimum concentration value of 0.5 µg/ml against S. agalactiae and induced ultrastructural cell changes revealed by scanning electron microscope. The safe concentration of OHM was determined as 0.8 mg/L for Nile tilapia. Four in vivo treatments were treated with 0 and 0.8 mg/L OHM and with or without challenge by S. agalactiae (1 × 107 CFU/mL) named control, OHM, S. agalactiae, and S. agalactiae + OHM groups. The OHM treatment improved the survival of Nile tilapia by 33.33% than S. agalactiae challenge group. Waterborne OHM treatment significantly mitigated the deleterious effects of S. agalactiae on hematological, hepato-renal functions, stress indicators, and antioxidant balance. OHM significantly alleviated nitric oxide levels, complement 3, IgM, and lysozyme activity, downregulation of liver antioxidant genes expression in S. agalactiae group. Furthermore, the addition of OHM to challenged fish with S. agalactiae-significantly reversed dramatic negative regulation of inflammatory, apoptosis, and immune related gene expression (caspase-3, bax, pcna, tnf-α, ifn-γ, il-8 il-1ß, il-10, tgf-ß, and bcl-2 in the Nile tilapia spleen. Additionally, the damaged hepatic and splenic structure induced by bacterial infection was restored with OHM treatment. Finally, S. coeruleorubidus metabolites (mainly OHM) revealed in vitro and in vivo antibacterial activity and showed alleviated effects on the physiological status of S. agalactiae infected tilapia.
Subject(s)
Cichlids , Fish Diseases , Streptococcal Infections , Streptomyces , Animals , Cytokines/genetics , Streptococcus agalactiae/physiology , Antioxidants , Anti-Bacterial Agents/pharmacology , Oxidative Stress , Gene Expression , ApoptosisABSTRACT
A simple and facile microwave-assisted method was developed for the synthesis of highly fluorescent nitrogen-doped carbon quantum dots (N-CQDs) using sucrose and urea. The produced quantum dots exhibited a strong emission band at 376 nm after excitation at 216 nm with quantum yield of 0.57. The as-prepared N-CQDs were characterized using Fourier-transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM) images, and ultraviolet-visible (UV-visible) spectra. The average particle size was 7.7 nm. It was found that torsemide (TRS) caused an obvious quenching of the fluorescent N-CQDs; so, they were used for its spectrofluorometric estimation. An excellent linear correlation was found between the fluorescence quenching of N-CQDs and the concentration of the drug in the range of 0.10 to 1.0 µg/mL with limit of quantitation (LOQ) of 0.08 µg/mL and limit of detection (LOD) of 0.027 µg/mL. The method was successfully applied for the assay of the drug in its commercial tablets and spiked human plasma samples, and the results obtained were satisfactory. Complex GAPI was used for greenness assessment of the analytical procedures and the pre-analysis steps. Interference likely to be introduced from co-administered drugs was also studied.
Subject(s)
Quantum Dots , Humans , Quantum Dots/chemistry , Torsemide , Carbon/chemistry , Nitrogen/chemistry , Urea , Sucrose , Fluorescent Dyes/chemistryABSTRACT
Urinary tract infections (UTIs) constitute the second most prevalent bacterial infections in the elderly demographic. The treatment landscape involves various antibiotics targeting the causative organisms; nevertheless, the emergence of resistance significantly impacts therapeutic effectiveness. Presently, a fixed-dose pharmaceutical combination is advocated to optimize patient outcomes by mitigating the risks of bacterial resistance and associated side effects. Ofloxacin (OFL) and cefpodoxime proxetil (CPD) combinations, co-administered with flavoxate hydrochloride (FLV), have demonstrated efficacy in UTI cases, offering relief from concomitant symptoms. In the pharmaceutical market, fixed-dose combinations have gained prominence, driven by advantages such as enhanced patient medication adherence and compliance. In the realm of analytical chemistry, the integration of green practices in the initial phases of method development is exemplified by the Greenness by Design (GbD) strategy. While univariate spectroscopic methods are conventionally considered suboptimal compared to chemometric techniques for resolving intricate mixtures, GbD approach, when applied to UV spectroscopy, enable univariate methods to attain comparable or superior outcomes. GbD adopts a systematic approach to optimize experimental conditions, minimizing environmental impact and maximizing analytical performance. Critical to GbD applications in UV spectroscopy is solvent selection, influencing spectral resolution and measurement sensitivity. GbD employs a combination of in-vitro and in-silico experiments to evaluate solute-solvent interactions with underlying photochemical quantum phenomena affecting the resulting spectral morphology, identifying an optimal compromise solvent with high resolution and minimal ecological impact. Consequently, it facilitates the efficient resolution of spectral overlapping and determination of complex mixtures in UV spectroscopy using univariate methods. Comparative analysis with chemometric techniques, acknowledged as potent spectral resolving methods, demonstrated that GbD-based univariate methods performed equivalently. The methodology was validated according to ICH recommendations, establishing a linear quantitation range (2-30 µg/mL) and a limit of detection (0.355-0.414 µg/mL) for the three drugs in human plasma. The greenness of the developed methodology was affirmed through the AGREE assessment protocol, confirming its environmentally conscious attributes.
ABSTRACT
Guaifenesin and pholcodine are frequently co-formulated in certain dosage forms. A new fast first derivative synchronous spectrofluorometric method has been used for their simultaneous analysis in mixtures. Here, first derivative synchronous spectrofluorometry enabled the successful simultaneous estimation of guaifenesin at 283 nm and pholcodine at 275 nm using a wavelength difference (Δλ) of 40 nm. The method was fully validated following International Council of Harmonization guidelines. For guaifenesin and pholcodine, linearity was determined within the corresponding ranges of 0.05-0.30 and 0.10-6.0 µg/ml. The two drugs were effectively analyzed using the developed approach in their respective formulations, and the results showed good agreement with those attained using reference methods. The method demonstrated excellent sensitivity, with detection limits down to 0.007 and 0.030 µg/ml and quantitation limits of 0.020 and 0.010 µg/ml for guaifenesin and pholcodine, respectively. Therefore, the procedure was successful in determining these drugs simultaneously in vitro in spiked plasma samples and syrup dosage form. The developed methodology also offered an environmentally friendly advantage by utilizing water as the optimal diluting solvent throughout the whole work. Different greenness approaches were investigated to ensure the method's ecofriendly properties.
Subject(s)
Codeine/analogs & derivatives , Guaifenesin , Spectrometry, Fluorescence/methods , Drug Compounding , MorpholinesABSTRACT
The study of the intermolecular binding interaction of small molecules with DNA can guide the rational drug design with greater efficacy and improved or more selective activity. In the current study, nintedanib's binding interaction with salmon sperm DNA (ssDNA) was thoroughly investigated using UV-vis spectrophotometry, spectrofluorimetry, ionic strength measurements, viscosity measurements, thermodynamics, molecular docking, and molecular dynamic simulation techniques under physiologically simulated conditions (pH 7.4). The obtained experimental results showed that nintedanib and ssDNA had an apparent binding interaction. Nintedanib's binding constant (Kb) with ssDNA, as determined using the Benesi-Hildebrand plot, was 7.9 × 104 M-1 at 298 K, indicating a moderate binding affinity. The primary binding contact forces were hydrophobic and hydrogen bonding interactions, as verified by the enthalpy and entropy changes (ΔH0 and ΔS0), which were - 16.25 kJ.mol-1 and 39.30 J mol-1 K-1, respectively. According to the results of UV-vis spectrophotometry, viscosity assays, and competitive binding interactions with ethidium bromide or rhodamine B, the binding mode of nintedanib to ssDNA was minor groove. Molecular docking and molecular dynamic simulation studies showed that nintedanib fitted into the B-DNA minor groove's AT-rich region with high stability. This study can contribute to further understanding of nintedanib's molecular mechanisms and pharmacological effects.
Subject(s)
Indoles , Salmon , Male , Animals , Molecular Docking Simulation , Salmon/metabolism , Circular Dichroism , Spectrometry, Fluorescence/methods , Spectrophotometry, Ultraviolet , Semen/metabolism , DNA/chemistry , Thermodynamics , Protein Kinase InhibitorsABSTRACT
BACKGROUND: The increased use of cephalosporin antibiotics in the last few years as well as the detection of their residues in wastewater treatment plants and hospital wastewater poses a risk for infiltration of their residues into environmental water samples. OBJECTIVE: A simplified, sensitive, and convenient solid-phase extraction (SPE) procedure coupled with either HPLC or fast HPLC methods with diode array detection was developed and validated to screen the residues of six different cephalosporin antibiotics: cefoperazone, cefipime, ceftazedime, ceftriaxone, cefdinir, and cefotaxime, along with amoxicillin, levofloxacin, and ciprofloxacin in water samples. METHODS: An HPLC-diode array detector (HPLC-DAD) method and a fast HPLC method, based on a core-shell stationary phase, were developed for the fast screening of the antibiotic compounds. In addition, the SPE step was optimized to enable the extraction of the studied drugs with high accuracy of the recovered amounts of residues. RESULTS: The method sensitivity was enhanced by the coupling of SPE with HPLC-DAD and fast HPLC to achieve low LODs; from 0.2 to 3.8 ng/mL and from 0.65 to 12.2 ng/mL, respectively. The developed methods were augmented by LC-MS/MS determination for confirmation of identity and quantity of any positively identified sample. The method was applied to the analysis of water samples collected from a rural site. In Addition, an example application of cleaning validation of cefotaxime-contaminated stainless-steel surfaces was provided. CONCLUSION: The method's simplicity and high sensitivity encourage its application in monitoring of antibiotic residues in different types of water samples such as environmental samples and samples from cleaning validation activities. HIGHLIGHTS: HPLC-DAD and fast HPLC methods were developed for separation of nine different antibiotics. The combination with the SPE procedure achieved low detection limits; from 0.2 to 3.8 ng/mL for SPE-HPLC-DAD and from 0.65 to 12.2 ng/mL for SPE-fast HPLC.
Subject(s)
Anti-Bacterial Agents , Tandem Mass Spectrometry , Chromatography, High Pressure Liquid/methods , Chromatography, Liquid , Anti-Bacterial Agents/analysis , Solid Phase Extraction/methods , Cefotaxime/analysis , Cephalosporins/analysis , WaterABSTRACT
UV spectroscopy is considered the simplest, the most money and time investor technique in analytical research. Besides its lowered solvent and energy consumption leading to greener outcomes, its practicality is wide and suitable for a wide range of applications. Multicomponent mixtures are always representing themselves as a problematic challenge for any analytical technique fortunately UV spectroscopic methods found many ways to tackle these mixtures. Fourier self-deconvolution (FSD) was recently applied in UV spectroscopy as an effective tool for the resolution of binary mixtures unfortunately like any other method may fail to completely resolve severely overlapping mixtures. In this paper, we epitomize the newly developed deconvoluted amplitude factor (DAF) spectrophotometric approach which couples the concepts of both the FSD and the amplitude factor methods for the resolution of tadalafil (TAD) in its binary mixtures with dapoxetine hydrochloride (DAP) or tamsulosin hydrochloride (TAM). The embraced approach was assessed regarding its greenness utilizing different assessing protocols to give evident proof for its sustainability. The innovative approach showed an enhancement in the resolution of binary mixtures and showed high sensitivity as noticed from limits of detection and quantitation which were (0.374, 1.136 µg/mL), (0.269, 0.817 µg/mL), and (0.518, 1.569 µg/mL) for TAD, DAP, and TAM, respectively. The method was validated as per ICH guidelines recommendations and also was statistically compared with recently reported methods which revealed no statistically significant difference. A very handy and reader-friendly data presentation approach was followed for the ease of statistical data interpretation and evaluation.
ABSTRACT
BACKGROUND: Solid phase extraction (SPE) techniques, based on computationally designed magnetic-based multi-targeting molecular imprinted polymer (MT-MIP), combined with UV spectrophotometric approaches provide advantages in the examination of counterfeit samples. OBJECTIVE: The current work describes an innovative and sustainable methodology for the simultaneous determination of tadalafil (TAD) and dapoxetine hydrochloride (DAP) in aphrodisiac counterfeit products (honey and instant coffee) utilizing SPE exploiting MT-MIP. Additionally, an innovative UV spectrophotometric method capable of resolving TAD in its pharmaceutical binary mixtures with DAP was developed. A novel computational approach was implemented to tailor the synthesis and design of the MT-MIP particles. METHODS: We applied a newly developed UV spectrophotometric method which was based on a Fourier self-deconvolution (FSD) method coupled with the isoabsorptive point for determination of TAD and DAP in pharmaceutical dosage form. We also applied an SPE process based on MT-MIP designed particles, assisting in the analysis of both drugs in counterfeit food samples. The SPE process and the UV spectroscopic methodology were assessed regarding their greenness using the pioneering green analytical procedure index (GAPI), analytical greeness including sample preparation (AGREEprep) and AGREE tools. The synthesized MT-MIP particles were characterized by scanning electron microscopy and energy-dispersive x-ray spectroscopy. RESULTS: The suggested spectrophotometric methods revealed a wide linear concentration range of 2-50 µg/mL with lower LODs in the range of 0.604-0.994 µg/mL. Additionally, the suggested method demonstrated the utmost sensitivity and eco-friendliness for their target in its mixed dosage form and counterfeit food products. CONCLUSION: The SPE process and the developed analytical UV spectroscopic methodology were validated as per the ICH guidelines, and were found to be suitable for overseeing some counterfeiting activities in commercially available honey and instant coffee aphrodisiac products. HIGHLIGHTS: An SPE method based on MT-MIP magnetic-based polymer and a UV spectroscopic method were successfully developed for analysis of TAD and DAP in different matrices.
Subject(s)
Aphrodisiacs , Molecular Imprinting , Polymers/chemistry , Molecular Imprinting/methods , Coffee , Solid Phase Extraction/methods , Computer-Aided Design , Pharmaceutical Preparations , Magnetic PhenomenaABSTRACT
Food and Drug Administration (FDA) recently approved co-formulated celecoxib and tramadol for the treatment of acute pain in adults. Three spectrophotometric methods were efficiently applied to estimate the co-formulated Celecoxib and Tramadol in their tablets; second derivative 2D-spectrophotometry technique (method I), induced dual-wavelength technique (method II) and dual-wavelength resolution technique (method III). The proposed methods were successfully validated following the International Council for Harmonisation (ICH) guidelines and statistically assessed based on the correlation coefficients, relative standard deviations as well as detection and quantitation limits. The obtained results revealed non-significant differences compared to the reported results as revealed by the variance ratio F test and Student t test. Moreover, the applied techniques were further assessed concerning their greenness based on the analytical eco-scale method revealing an excellent green scale with a final score of 95. The proposed spectrophotometric techniques could be applied for the routine analysis and quality control of the studied drugs in their dosage form.
Subject(s)
Tramadol , Adult , Humans , Celecoxib , Spectrophotometry/methods , Tablets/analysis , Drug CombinationsABSTRACT
A facile, simple, green and sensitive spectrofluorometric method was developed for determination of the calcimimetic drug cinacalcet hydrochloride. It is used for the treatment of hyperparathyroidism. The drug showed high native fluorescence intensity at 320 nm after excitation at 280 nm. The method was linear over the range of 5.0-400.0 ng ml-1with excellent correlation (R2= 0.9999). Limit of detection (LOD) and limit of quantitation (LOQ) values were 1.19 and 3.62 ng ml-1, respectively. The percentage recovery was found to be 100.42% ± 1.39 (n=8). The proposed method was successfully applied for determination of cinacalcet in spiked human plasma samples with % recoveries of (87.23 to 109.69%). Two recent greenness metrics (GAPI and Analytical Eco-Scale) were chosen to prove the eco-friendly nature of the method. Furthermore, the proposed method was successfully applied to dissolution study of commercial cinacalcet tablets. The interference likely to be introduced by some commonly co-administrated drugs such as metoprolol and itraconazole was studied; the tolerance limits were calculated.
Subject(s)
Tablets , Humans , Cinacalcet , Limit of DetectionABSTRACT
Greenness-by-design (GbD) is an approach that integrates green chemistry principles into the method development stage of analytical processes, aiming to reduce their environmental impact. In this work, we applied GbD to a novel univariate double divisor corrected amplitude (DDCA) method that can resolve a quaternary pharmaceutical mixture in a fixed-dose polypill product. We also used a genetic algorithm as a chemometric modeling technique to select the informative variables for the analysis of the overlapping mixture. This resulted in more accurate and efficient predictive models. We used a computational approach to study the effect of solvents on the spectral resolution of the mixture and to minimize the spectral interferences caused by the solvent, thus achieving spectral resolution with minimal analytical effort and ecological footprint. The validated methods showed wide linear concentration ranges for the four components (1-30 µg/mL for losartan, 2.5-30 µg/mL for atorvastatin and aspirin, and 2.5-35 µg/mL for atenolol) and achieved high scores on the hexagon and spider charts, demonstrating their eco-friendliness.
Subject(s)
Chemistry, Pharmaceutical , Spectrophotometry , Structure-Activity Relationship , Spectrophotometry/methods , Chemometrics , AlgorithmsABSTRACT
For the simultaneous estimation of two co-formulated antihistaminic drugs (Bilastine and Montelukast), a novel and eco-friendly reversed-phase HPLC approach with both diode array and fluorescence detection modes was designed. Rather than using the routine methodology, the Quality by Design (QbD) approach was adopted to speed up the method development and to test robustness of the method. To evaluate the effect of variable factors on chromatographic response, a full factorial design was used. The chromatographic separation was performed using isocratic elution on the C18 column. The mobile phase consists of 92% methanol, 6% acetonitrile, and 2% phosphate buffer with 0.1 (v/v) triethylamine adjusted to pH 3, it was pumped at a flow rate of 0.8 mL/min with an injection volume of 20 µL. The developed stability indicating HPLC approach was used to assess the stability of montelukast (MNT). It was subjected to a variety of stress conditions, including hydrolytic (acid-base), oxidative, thermal, and photolytic stress conditions. All of these conditions were found to have relevant degradation pathways. Under the described experimental conditions, MNT degradation followed pseudo-first-order kinetics. The kinetic parameters of its degradation (rate constant and t1/2) were calculated and a proposal for the degradation pathway was postulated.
ABSTRACT
BACKGROUND: Computationally designed molecular imprinted polymer (MIP) incorporation into electrochemical sensors has many advantages to the performance of the designed sensors. The innovative self-validated ensemble modeling (SVEM) approach is a smart machine learning-based (ML) technique that enables the design of more accurate predictive models using smaller data sets. OBJECTIVE: The novel SVEM experimental design methodology is exploited here exclusively to optimize the composition of four eco-friendly PVC membranes augmented by a computationally designed magnetic molecularly imprinted polymer to quantitatively determine drotaverine hydrochloride (DVN) in its combined dosage form and human plasma. Furthermore, the application of hybrid computational simulations such as molecular dynamics and quantum mechanical calculations (MD/QM) is a time-saving and eco-friendly provider for the tailored design of the MIP particles. METHOD: Here, for the first time, the predictive power of ML is assembled with computational simulations to develop four PVC-based sensors decorated by computationally designed MIP particles using four different experimental designs known as central composite, SVEM-LASSO, SVEM-FWD, and SVEM-PFWD. The pioneering AGREE approach further assessed the greenness of the analytical methods, proving their eco-friendliness. RESULTS: The proposed sensors showed decent Nernstian responses toward DVN in the range of 58.60-59.09 mV/decade with a linear quantitative range of 1 × 10-7 - 1 × 10-2 M and limits of detection in the range of 9.55 × 10-8 to 7.08 × 10-8 M. Moreover, the proposed sensors showed ultimate eco-friendliness and selectivity for their target in its combined dosage form and spiked human plasma. CONCLUSIONS: The proposed sensors were validated in accordance with International Union of Pure and Applied Chemistry (IUPAC) recommendations, proving their sensitivity and selectivity for drotaverine determination in dosage form and human plasma. HIGHLIGHTS: This work presents the first ever application of both the innovative SVEM designs and MD/QM simulations in the optimization and fabrication of drotaverine-sensitive and selective MIP-decorated PVC sensors.
Subject(s)
Papaverine , Polymers , Humans , Polymers/chemistry , Computer-Aided DesignABSTRACT
A green, rapid, and simple RP-UPLC method was developed and optimized by full factorial design for the simultaneous separation of oseltamivir phosphate, daclatasivir dihydrochloride, and remdesivir, with dexamethasone as a co-administered drug. The separation was established on a UPLC column BEH C18 1.7 µm (2.1 × 100.0 mm) connected with a UPLC pre-column BEH 1.7 µm (2.1 × 5.0 mm) at 25 °C with an injection volume of 10 µL. The detector (PDA) was set at 239 nm. The mobile phase consisted of methanol and ammonium acetate (8.1818 mM) in a ratio of 75.7: 24.3 (v/v). The flow rate was set at 0.048 mL min-1. The overall separation time was 9.5 min. The retention times of oseltamivir phosphate, dexamethasone, daclatasivir dihydrochloride, and remdesivir were 6.323 ± 0.145, 7.166 ± 0.036, 8.078 ± 0.124, and 8.572 ± 0.166 min (eight replicates), respectively. The proposed method demonstrated linearity in the ranges of 10.0-500.0 (ng mL-1) and 0.5-30.0 (µg mL-1) for oseltamivir phosphate, 50.0-5000.0 (ng mL-1) for dexamethasone, 25.0-1000.0 (ng mL-1) and 0.5-25.0 (µg mL-1) for daclatasvir dihydrochlorde, and 10.0-500.0 (ng mL-1) and 0.5-30.0 (µg mL-1) for remdesivir. The coefficients of determination (R2) were greater than 0.9999, with percentage recoveries greater than 99.5% for each drug. The limits of quantitation were 6.4, 1.8, 7.8, and 1.6 ng mL-1, and the limits of detection were 1.9, 0.5, 2.0, and 0.5 ng mL-1 for oseltamivir phosphate, dexamethasone, daclatasivir dihydrochloride, and remdesivir, respectively. The proposed method was highly precise, as indicated by the low percentage of relative standard deviation values of less than 1.2% for each drug. The average content and uniformity of dosage units in the studied drugs' dosage forms were determined. The average contents of oseltamivir phosphate, dexamethasone, daclatasivir dihydrochloride, and remdesivir were nearly 93%, 102%, 99%, and 95%, respectively, while the uniformity of dosage unit values were nearly 92%, 102%, 101%, and 97%. Two novel methods were established in this work. The first method was used to assess the stability of standard solutions. This novel method was based on the slope of regression equations. The second was to evaluate the excipient's interference using an innovative instrumental standard addition method. The novel instrumental standard addition method was performed using the UPLC instrument program. It was more accurate, sensitive, time-saving, economical, and eco-friendly than the classic standard addition method. The results showed that the proposed method can estimate the tested drugs' concentrations without interference from their dosage form excipients. According to the Eco-score (more than 75), the Green Analytical Procedure Index (GAPI), and the AGREE criteria (total score of 0.77), the suggested method was considered eco-friendly.
Subject(s)
COVID-19 , Oseltamivir , Humans , Chromatography, High Pressure Liquid/methods , Dexamethasone , PhosphatesABSTRACT
Highly fluorescent nitrogen doped carbon quantum dots (N-CQDs) were prepared by a single-step method based on microwave heating of cane sugar and urea. The produced N-CQDs were applied as nano-sensors for the spectrofluorimetric determination of eplerenone and spironolactone. A strong emission band at 376 nm was obtained after excitation at 216 nm due to the produced N-CQDs. The native fluorescence of N-CQDs was obviously quenched upon adding increased concentrations of each drug. A strong correlation was found between the fluorescence quenching of N-CQDs and the concentration of each drug. The method was found to be linear over the range of 0.5 to 5.0 µg/mL for eplerenone and 0.5 to 6.0 µg/mL for spironolactone with LOQ of 0.383 µg/mL and 0.262 µg/mL. The developed method was further extended for determination of both drugs in their pharmaceutical tablets and spiked human plasma. The results obtained were statistically compared with those of reported methods. The mechanism of fluorescence quenching of N-CQDs by the two drugs was discussed.
Subject(s)
Quantum Dots , Humans , Diuretics , Carbon , Nitrogen , Spironolactone , Eplerenone , Spectrometry, Fluorescence/methods , Fluorescent Dyes , TabletsABSTRACT
Telmisartan (TEL) and Nebivolol (NEB) are frequently co-formulated in a single dosage form that is frequently prescribed for the treatment of hypertension, moreover, telmisartan is currently proposed to be used to treat COVID19-induced lung inflammation. Green rapid, simple, and sensitive synchronous spectrofluorimetric techniques for simultaneous estimation of TEL and NEB in their co-formulated pharmaceutical preparations and human plasma were developed and validated. Synchronous fluorescence intensity at 335 nm was used for TEL determination (Method I). For the mixture, the first derivative synchronous peak amplitudes (D1) at 296.3 and 320.5 nm were used for simultaneous estimation of NEB and TEL, respectively (Method II). The calibration plots were rectilinear over the concentration ranges of 30-550 ng/mL, and 50-800 ng/mL for NEB and TEL, respectively. The high sensitivity of the developed methods allowed for their analysis in human plasma samples. NEB`s Quantum yield was estimated by applying the single-point method. The greenness of the proposed approaches was evaluated using the Eco-scale, National Environmental Method Index (NEMI), and Green Analytical Procedure Index (GAPI) methods.
Subject(s)
Antihypertensive Agents , COVID-19 , Humans , Antihypertensive Agents/therapeutic use , Telmisartan , Nebivolol/therapeutic use , Pharmaceutical PreparationsABSTRACT
BACKGROUND: Carbon quantum dots (CQDs) are new class of carbon nanoparticles. Recently, they have been widely used as fluorescent probes due to their easy accessibility, optical properties and chemical inertness. Many available precursors are used in the synthesis of carbon quantum dots. The electrical and optical properties of CQDs could be enhanced by doping hetero atoms such as nitrogen or sulfur into their structure. OBJECTIVE: The current work presents the synthesis and characterization of water-soluble nitrogen doped carbon quantum dots (N-CQDs) and their use as fluorescent nano-sensors for the spectrofluorimetric determination of furosemide in its pharmaceutical preparations and spiked human plasma. METHODS: A domestic microwave was used to prepare the N-CQDs by heating a solution of sucrose and urea till complete charring (about ten minutes). The produced N-CQDs exhibit a strong emission band at 376 nm after excitation at 216 nm. Furosemide caused a quantitative quenching in the fluorescence intensity of the produced N-CQDs. RESULTS: The proposed method was validated according to ICH Guidelines. The method was found to be linear over the range of 0.1-1.0 µg/mL with LOQ of 0.087 µg/ml. CONCLUSION: Ecofriendly nano fluorescent sensors (N-CQDs) were successfully synthesized. The size of N-CQDs was distributed in the range of 6.63 nm to 10.23 nm with an average of 8.2 nm. The produced N-CQDs were used as fluorescent probes for the estimation of furosemide in its pharmaceutical preparations as well as spiked human plasma samples.
ABSTRACT
This study uses a liquid chromatography-electrospray ionization-tandem mass spectrometry method to determine ß-Sitosterol and Ferulic acid in Pygeum africanum extract. Chromatographic separation of the two analytes was performed on an ACQUITY UPLC H-Class system coupled with Xevo TQD mass spectrometer and HSS T3 C18 column (2.1 X 50 mm, 1.8 µm). Mobile phase A consisted of an aqueous solution of 0.1% formic acid (v/v), and mobile phase B was 0.1% formic acid (v/v) in methanol pumped through a gradient elution mode. Mass spectrometer parameters were optimized using an electrospray ionization source in the positive and negative ionization modes. The quantification of the two analytes was performed using multiple reaction monitoring transitions. The method was fully validated per (FDA) guidelines regarding linearity, accuracy, precision, carryover and selectivity. The proposed method was applied successfully to determine the two investigated compounds in commercially available pharmaceutical products.