A new tannin-based adsorbent synthesized for rapid and selective recovery of palladium and gold: Optimization using central composite design.

A tannin-based adsorbent was synthesized by pomegranate peel tannin powder modified with ethylenediamine (PT-ED) for the rapid and selective recovery of palladium and gold. To characterize PT-ED, field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS-Mapping), and Fourier transform infrared spectroscopy (FT-IR) were used. Central composite design (CCD) was used for optimization. The kinetic, isotherm, interference of coexisting metal ions, and thermodynamics were studied. The optimal conditions, including Au (III) concentration = 30 mgL-1, Pd (II) concentration = 30 mgL-1, adsorbent mass = 26 mg, pH = 2, and time = 26 min with the sorption percent more than 99 %, were anticipated for both metals using CCD. Freundlich model and pseudo-second-order expressed the isotherm and kinetic adsorption of the both metals. The inhomogeneity of the adsorbent surface and the multi-layer adsorption of gold and palladium ions on the PT-ED surface are depicted by the Freundlich model. The thermodynamic investigation showed that Pd2+ and Au3+ ions adsorption via PT-ED was an endothermic, spontaneous, and feasible process. The maximum adsorption capacity of Pd2+ and Au3+ ions on PT-ED was 261.189 mgg-1 and 220.277 mgg-1, respectively. The probable adsorption mechanism of Pd2+ and Au3+ ions can be ion exchange and chelation. PT-ED (26 mg) recovered gold and palladium rapidly from the co-existing metals in the printed circuit board (PCB) scrap, including Ca, Zn, Si, Cr, Pb, Ni, Cu, Ba, W, Co, Mn, and Mg with supreme selectivity toward gold and palladium. The results of this work suggest the use of PT-ED with high selectivity and efficiency to recover palladium and gold from secondary sources such as PCB scrap.

QSAR analysis of pyrimidine derivatives as VEGFR-2 receptor inhibitors to inhibit cancer using multiple linear regression and artificial neural network.

BACKGROUND AND PURPOSE: In this study, the pharmacological activity of 33 compounds of furopyrimidine and thienopyrimidine as vascular endothelial growth factor receptor 2 (VEGFR-2) inhibitors to inhibit cancer was investigated. The most important angiogenesis inducer is VEGF endothelial growth factor, which exerts its activity by binding to two tyrosine kinase receptors called VEGFR-1 and VEGFR-2. Due to the critical role of VEGF in the pathological angiogenesis of this molecule, it is a valuable therapeutic target for anti-angiogenesis therapies. EXPERIMENTAL APPROACH: After calculating descriptors using SPSS software and stepwise selection method, 5 descriptors were used for modeling in multiple linear regression (MLR) and artificial neural network (ANN). The calibration series and the test series in this study included 26 and 7 combinations, respectively. FINDINGS/RESULTS: The performance evaluation of models was determined by the R2, RMSE, and Q2 statistic parameters. The R2 values of MLR and ANN models were 0.889 and 0.998, respectively. Also, the value of RMSE in the ANN model was lower and its Q2 value was higher than the MLR model. CONCLUSION AND IMPLICATIONS: The results were evaluated by different statistical methods and it was concluded that the nonlinear neural network method is powerful to predict the pharmacological activity of similar compounds, and because of the complex and nonlinear relationships, the MLR was not capable of establishing a good model with high predictive power.

Highly effective pre-concentration of thymol and carvacrol using nano-sized magnetic molecularly imprinted polymer based on experimental design optimization and their trace determination in summer savoury, Origanum majorana and Origanum vulgare extracts.

To ascertain thymol and carvacrol in pharmaceutical syrups, a valid and effective magnetic molecular imprinted polymer dispersive solid phase microextraction (MMIP-DSPME) process was developed in this study, which was in combination with a high performance liquid chromatography-ultra violet (HPLC-UV) technique for the assessment of thymol and carvacrol separation and pre-concentration. Contact time, eluent kind and volume, pH, the mass of the MMIP were all taken into consideration as key factors. Design expert and multi-objective response surface methodology (RSM) were used to optimize these variables. The mass of the MMIP, sample pH, eluent kind, time of sorption, the volume of eluent, and time of elution were 10 mg, 6, acetonitrile, 28 min, 200 µL, and 5.5 min, respectively, for the maximum extraction recovery of the analytes. The limit of detection (LOD) was 0.042 ng mL-1 at the optimal conditions, while the value for the limit of quantification (LOQ) was 0.140 ng mL-1. At the optimized conditions for thymol and carvacrol, the suggested MMIP sorbent had sorption capacities of 64.1 and 72.6 mg g-1, respectively. Furthermore, for triplicate measurements, the linear dynamic range (LDR) was 0.40-5000 ng mL-1, and the method's accuracy (RSD %) was 6.26%. The saturation magnetization for the MMIP was 19.0 emu g-1 obtained by VSM, allowing the sorbent to be separated quickly. The sorption experiments confirmed the large sorption capacity of the MMIP for thymol and carvacrol, as well as its homogeneous binding sites. The extraction recovery for thymol and carvacrol was 96.9-103.8% and 96.6-105.4%, respectively, at all spiked amounts (20, 100, 200, and 500 ng mL-1). The findings of seven desorption-regeneration cycles using MMIP demonstrated the high stability of the sorbent. The MMIP revealed a particular behavior of sorption for thymol and carvacrol, implying a selective, simple, effective, and flexible analytical method.

Ultrasound-assisted solid phase microextraction-HPLC method based on Fe3O4@SiO2-NH2-molecularly imprinted polymer magnetic nano-sorbent for rapid and efficient extraction of harmaline from Peganum harmala extract.

In the present study, a magnetic molecularly imprinted polymer (MMIP) was synthesized for the extraction of harmaline from Peganum harmala by dispersive solid-phase microextraction (DSPME). The MMIP for selective and intelligent extraction of harmaline with excellent functionality and high selectivity was synthesized using the sol-gel method with functionalized superparamagnetic core-shell nanoparticles, ethylene glycol dimethacrylate (EDMA) as a cross-linker, methacrylic acid (MAA) as a functional monomer, and 2,2-azobisisobutyronitrile (AIBN) as a porogen. To study the properties and morphology of the coated polymer, FT-IR spectroscopy, FESEM, TEM images, and VSM were used. The DSPME-HPLC-UV equipment was used to quantify and analyze the data obtained from harmaline extraction. In this research, the efficiency of the synthesized polymer in harmaline extraction was modeled and optimized using the response surface methodology based on central composite design (RSM-CCD). In addition, for modeling the isotherm of harmaline sorption by the MMIP, Langmuir and Freundlich isotherm equations were used. The obtained results showed that the extraction of harmaline with the MMIP was well described with Freundlich isotherm. The results of the validation of the method showed that the measurement of harmaline in the concentration range of 1.0-4000 ng mL-1 followed a linear relationship (R2 = 9986.0). Moreover, the accuracy or repeatability index (% RSD) was determined to be < 10, and the LOQ and LOD values were 0.526 and 0.158 ng mL-1, respectively. The results of this study showed that the DSPME technique by using the synthesized MMIP as an effective sorbent with high efficiency and capacity could be utilized for pre-concentration and extraction of harmaline from real and complex samples.

An insight into the interaction between malachite green oxalate with human serum albumin: Molecular dynamic simulation and spectroscopic approaches.

Cationic triarylmethane dyes such as malachite green are aromatic xenobiotic compounds causing environmental pollution. The affinity between hazardous materials and biomolecules makes it important to understand the properties of such compounds. Accordingly, in this study, the possible molecular interaction between this pollutant and the human serum albumin (HSA) was investigated using a combination of molecular docking, molecular dynamic simulation and multi-spectroscopic approaches. The docking results illustrated that malachite green oxalate (MGO) could bind to some of the HSA amino acids with the estimated free energy = -32.93 kJ/mol. Further, the results of the dynamic simulation revealed that MGO had a steady interaction with the protein though increasing flexibility and decreasing the HSA compactness. These results were, therefore, in agreement with those obtained by spectroscopic techniques. The MGO concentration of 0.0005 mM could quench the HSA's intrinsic fluorescence by %16.88. The protein structural changes also revealed that the binding interaction of MGO-HSA was accompanied by an increase in the α-helix and a decrease in the ß-sheet of the protein. Overall, this study indicated the suitable molecular modeling interaction of MGO and HSA.

Optimization of simultaneous ultrasound assisted toxic dyes adsorption conditions from single and multi-components using central composite design: Application of derivative spectrophotometry and evaluation of the kinetics and isotherms.

Present study is devoted on the efficient application of Sn (O, S)-NPs -AC for simultaneous sonicated accelerated adsorption of some dyes from single and multi-components systems. Sn (O, S) nanoparticles characterization by FESEM, EDX, EDX mapping and XRD revel its nano size structure with high purity of good crystallinity. Present adsorbent due to its nano spherical shape particles with approximate diameter of 40-60nm seems to be highly effective in this regard. The effects of five variables viz. pH (3.5-9.5), 0.010-0.028g of adsorbent and 0.5-6.5min mixing by sonication is good and practical conditions for well and expected adsorption of MB and CV over concentration range of 3-15mgL-1. Combination of response surface methodology (RSM) based on central composite design (CCD) and subsequent of analysis of variance (ANOVA) and t-test statistics were used to test the significance of the independent variables and their interactions. Regression analysis reveal that experimental data with high repeatability and efficiency well represented by second-order polynomial model with coefficient of determination value of 0.9988 and 0.9976 for MB and CV, respectively following conditions like pH 8.0, 0.016g adsorbent, 15mgL-1 of both dyes 4min sonication time is proportional with achievement of experimental removal percentage of 99.80% of MB and 99.87% of CV in batch experiment. Evaluation and estimation of adsorption data with Langmuir and Freundlich isotherm well justify the results based on their correlation coefficient and error analysis confirm that Langmuir model is good model with adsorption capacity of 109.17 and 115.34mgg-1 in single system and 95.69 and 102.99mgg-1 in binary system for MB and CV, respectively. MB and CV kinetic and rate of adsorption well fitted by pseudo-second order equation both in single and binary systems and experimental results denote more and favorable adsorption of CV than respective value in single system. The pseudo-second-order rate constant k2 in binary system larger than single system.

Cation-pi interaction in complex formation between Tl+ ion and calix[4]crown-6 and some calix[4]biscrown-6 derivatives: thallium-203 NMR, proton NMR, and X-ray evidence.

Metallocapped complexation of the thallium(I) ion with calix[4]crown-6 (1) and three different calix[4]biscrown-6 derivatives (2-4) has been investigated by a combination of (203)Tl and (1)H NMR in a CD(3)CN/CDCl(3) (4:1 v/v) solution. The results clearly revealed the formation in solution of mono- and dithallium(I) complexes in which the metal cations are held in the ligands' cavities close to the calix[4]arene ring. In addition, a solid state mononuclear complex between 1,3-calix[4]bis-o-benzo-crown-6 (3) and TlClO(4) was prepared, and its X-ray crystal structure was determined. The results of the structural data in solution and the solid state suggested that the calix[4]crown-6 derivatives considered provide pi cavities as active sites for the complexation of thallium(I) ions.

Dynamic NMR study of the kinetics of complexation of Tl(+) ion with calix[4]crown-6.

The complexation and exchange kinetics and mechanism for the dissociation and conformational change of thallium ion complex of calix[4]crown-6 were studied in CD(3)CN/CDCl(3) (4:1 v/v) solution by dynamic (1)H NMR. The results show the formation of a 1:1 complex with cone conformation. From variable temperature dynamic NMR analysis in the range 223-293 K, two coalescence temperatures at 228 and 243 K were ascertained. The activation parameters for the dissociation process, E(a) (kJ/mol), DeltaS(++) (J/mol.K), and DeltaH(++) (kJ/mol) are 11.0, -133.2, and 10.1 for the bimolecular regime and 21.5, -112.8, and 20.6 for the unimolecular regime, respectively. In addition, the dynamic (1)H NMR spectroscopy shows that the exchange of Tl(+) between the two crown sides of the complexed ligand proceeds through an intramolecular tunneling. An Arrhenius convex curve was observed for intramolecular exchange. This phenomenon is explained in terms of two conformer state formations differentiated by hydrogen bond association.