Exploring Optically Stable Reddish-Orange Fluorescent Magnetic Pigment (0.90)Y2O3:(0.10-x)Eu3+:(x)Bi3+ for Anti-counterfeiting Applications.

The (0.90)Y2O3:(0.10-x)Eu3+:(x)Bi3+ nanophosphors (0.00 ≤ x ≤ 0.06) are synthesised using chemical combustion citrate route and characterized via X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, UV- visible and photoluminescence spectroscopy. The scanning electron micrographs indicate that the grain size of the phosphors ranges between 40 to 50 nm. The photoluminescence (PL) spectra, acquired under the excitation wavelength of 365 nm of ultraviolet light, show emission peaks at wavelengths 580 nm, 586-598 nm, 610 nm, 629-661 nm and 686-695 nm corresponding to the 5D0 → 7FJ electronic transitions of the Eu3+ ion with J = 0, 1, 2, 3 and 4, respectively. The most intense PL spectra at 611 nm (5D0 → 7F2), showcasing reddish-orange emission, indicate a higher concentration of Eu3+ ions in asymmetric sites within the Y2O3 host matrix. The presence of the distinct electronic transitions of Eu3+ in PL spectra acclaims that Bi3+ ions transfer their energy efficiently to Eu3+ ions in the matrix. Physical and chemical tests are being conducted on nanophosphors with Bi3+ substitutional doping of x = 0.02 and x = 0.04, both demonstrating intense PL emission. Magnetisation measurements suggest the soft magnetic nature of the nanophosphors, attributing it to the presence of Eu3+ ions in the 7F2 state. The highest PL intensity is seen in the nanophosphor (x = 0.04) with substitutional doping of 6% of Eu3+ and 4% of Bi3+ in Y2O3. This nanophosphor also demonstrates excellent optical stability in the investigated conditions and exhibits soft magnetic behaviour, positioning it as a promising material for incorporation as a fluorescent magnetic pigment in security ink applications. These features serve to prevent counterfeiting of secured documents both optically and magnetically.

Healthy and pathological pallidal regulation of thalamic burst versus tonic mode firing: a computational simulation.

The mechanisms by which the basal ganglia influence the pallidal-receiving thalamus remain to be adequately defined. Our prior in vivo recordings in fully alert normal and dystonic rats revealed that normally fast tonic discharging entopeduncular [EP, rodent equivalent of the globus pallidus internus (GPi)] neurons are pathologically slow, highly irregular, and bursty under dystonic conditions. This, in turn, induces pallidal-receiving thalamic movement-related neurons to change from a healthy burst predominant to a pathological tonic-predominant resting firing mode. This study aims to understand the pallidal influence on thalamic firing modes using computational simulations. We inputted various combinations of healthy and pathological (dystonic) in vivo neuronal recordings to the Rubin and Terman's computational model of low threshold spiking pallidothalamic neurons. The input sets consist of representative tonic, burst, irregular tonic and irregular burst inputs collected from EP/GPi in our animal lab. Initial test combinations of EP/ GPi input to the model were identical to the neuronal population distributions observed in vivo. The thalamic neuron model outputted similar firing rate and mode as observed in corresponding in-vivo thalamus. Further influence of each individual patterns was also delineated. By simulating the firing properties of encountered neurons, the basal ganglia output is suggested to critically act as firing mode selector for thalamic motor relay neurons. By selecting and determining the timing and extent of opening of thalamic T-type calcium channels via GABAergic hyperpolarizing input, GPi neurons are in position to precisely orchestrate thalamocortical burst motor signaling.

Effect of neuroanatomy on corticomotor excitability during and after transcranial magnetic stimulation and intermittent theta burst stimulation.

Individual neuroanatomy can influence motor responses to transcranial magnetic stimulation (TMS) and corticomotor excitability after intermittent theta burst stimulation (iTBS). The purpose of this study was to examine the relationship between individual neuroanatomy and both TMS response measured using resting motor threshold (RMT) and iTBS measured using motor evoked potentials (MEPs) targeting the biceps brachii and first dorsal interosseus (FDI). Ten nonimpaired individuals completed sham-controlled iTBS sessions and underwent MRI, from which anatomically accurate head models were generated. Neuroanatomical parameters established through fiber tractography were fiber tract surface area (FTSA), tract fiber count (TFC), and brain scalp distance (BSD) at the point of stimulation. Cortical magnetic field induced electric field strength (EFS) was obtained using finite element simulations. A linear mixed effects model was used to assess effects of these parameters on RMT and iTBS (post-iTBS MEPs). FDI RMT was dependent on interactions between EFS and both FTSA and TFC. Biceps RMT was dependent on interactions between EFS and and both FTSA and BSD. There was no groupwide effect of iTBS on the FDI but individual changes in corticomotor excitability scaled with RMT, EFS, BSD, and FTSA. iTBS targeting the biceps was facilitatory, and dependent on FTSA and TFC. MRI-based measures of neuroanatomy highlight how individual anatomy affects motor system responses to different TMS paradigms and may be useful for selecting appropriate motor targets when designing TMS based therapies.

Randomized trial of rTMS in traumatic brain injury: improved subjective neurobehavioral symptoms and increases in EEG delta activity.

PRIMARY OBJECTIVE: While repetitive transcranial magnetic stimulation (rTMS) has shown efficacy for cognitive difficulties accompanying depression, it is unknown if it can improve cognition in persons with traumatic brain injury. RESEARCH DESIGN: Using a sham-controlled crossover design, we tested the capacity of high frequency rTMS of the prefrontal cortex to improve neuropsychological performance in attention, learning and memory, and executive function. METHODS: Twenty-six participants with cognitive complaints and a history of mild-to-moderate traumatic brain injury were randomly assigned to receive first either active or sham 10 Hz stimulation for 20 minutes (1200 pulses) per session for five consecutive days. After a one-week washout, the other condition (active or sham) was applied. Pre- and post-treatment measures included neuropsychological tests, cognitive and emotional symptoms, and EEG. MAIN OUTCOMES AND RESULTS: Results indicated no effect of treatment on cognitive function. Subjective measures of depression, sleep dysfunction, post-concussive symptoms (PCS), and executive function showed significant improvement with stimulation, retaining improved levels at two-week follow-up. EEG delta power exhibited elevation one week after stimulation cessation. CONCLUSIONS: While there is no indication that rTMS is beneficial for neuropsychological performance, it may improve PCS and subjective cognitive dysfunction. Long-term alterations in cortical oscillations may underlie the therapeutic effects of rTMS.

Safety Study of Combination Treatment: Deep Brain Stimulation and Transcranial Magnetic Stimulation.

Patients with advanced Parkinson's disease (PD) often receive deep brain stimulation (DBS) treatment, in which conductive leads are surgically implanted in the brain. While DBS treats tremor and rigidity, patients often continue to suffer from speech and swallowing impairments. There is preliminary evidence that transcranial magnetic stimulation (TMS) of the cortex may be beneficial for these symptoms. However, the potential electromagnetic interactions of the strong magnetic fields from TMS on the conductive leads is unknown, and the combination therapy has not been approved for use. In this article, we report an experimental study of the safety of combining DBS and TMS. We fabricated an anatomically accurate head and brain phantom with electrical conductivities matching cerebrospinal fluid and averaged conductivity of gray and white matter. Induced current on an implanted DBS probe in the brain phantom was measured. Our results show that TMS will induce current values in the range or higher than typical DBS stimulation current. Thus, the combination of TMS/DBS treatment might cause over-stimulation in the brain when stimulated directly over the DBS lead with 100% TMS current intensity.

Inkjet Printing of Magnetic Particles Toward Anisotropic Magnetic Properties.

Unique properties of one-dimensional assemblies of particles have attracted great attention during the past decades, particularly with respect to the potential for anisotropic magnetism. Patterned films can be created using inkjet printing; however, drying of particle-laden colloidal droplets on solid surfaces is usually accompanied by the well-known coffee-ring effect, deteriorating both the uniformity and resolution of the printed configurations. This study examines the effect of externally applied magnetic field on particle deposition patterns. Ferromagnetic Gd5Si4 particles were formulated in terpineol oil and directly deposited via magnetic field-assisted inkjet printing on a photopaper to generate patterned films with suppressed coffee-ring effect. The particle deposition morphology is determined by both solvent imbibition and particle-magnetic field interactions. Three characteristic times are considered, namely, the critical time for solvent imbibition into the substrate (tim), the time it takes for particles to form chains in the presence of the magnetic field (tch), and the time in which the particles reach the substrate in the direction normal to the substrate (tpz). The characteristic time ratios (tpz/tim) and (tpz/tch) determine the final deposition morphology in the presence of magnetic field. The ability to control particle deposition and assembly, thus tuning the magnetic anisotropic properties of nanostructured materials is a promising approach for many engineering applications.

Impact of non-brain anatomy and coil orientation on inter- and intra-subject variability in TMS at midline.

OBJECTIVE: To investigate inter-subject variability with respect to cerebrospinal fluid thickness and brain-scalp distance, and to investigate intra-subject variability with different coil orientations. METHODS: Simulations of the induced electric field (E-Field) using a figure-8 coil over the vertex were conducted on 50 unique head models and varying orientations on 25 models. Metrics exploring stimulation intensity, spread, and localization were used to describe inter-subject variability and effects of non-brain anatomy. RESULTS: Both brain-scalp distance and CSF thickness were correlated with weaker stimulation intensity and greater spread. Coil rotations show that for the dorsal portion of the stimulated brain, E-Field intensities are highest when the anterior-posterior axis of the coil is perpendicular to the longitudinal fissure, but highest for the medial portion of the stimulated brain when the coil is oriented parallel to the longitudinal fissure. CONCLUSIONS: Normal anatomical variation in healthy individuals leads to significant differences in the site of TMS, the intensity, and the spread. These variables are generally neglected but could explain significant variability in basic and clinical studies. SIGNIFICANCE: This is the first work to show how brain-scalp distance and cerebrospinal fluid thickness influence focality, and to show the disassociation between dorsal and medial TMS.