The carbon stock potential of the restored mangrove ecosystem of Pasarbanggi, Rembang, Central Java.

Mangrove ecosystems can absorb significant amounts of carbon and help mitigate climate change. However, their existence continues to be endangered by natural and human forces. Therefore, mangrove restoration is regarded as a crucial component of the global climate change agenda. This study aims to estimate the potential total carbon stock of restored mangrove ecosystems in Pasarbanggi, Rembang, Central Java. The above-below-ground (root) carbon stock was calculated using several published allometric equations. The loss-on-ignition method analyzed leaf litter and sediment carbon stocks. This study estimates the Pasarbanggi mangrove ecosystem's total carbon stock potential at 0.02 × 106 MgC, which is equivalent to the potential CO2 emission of 0.08 × 106 MgCO2e, with up to 65% stored in sediments. This study highlights the critical role of restored mangrove ecosystems on the climate change mitigation agenda by reducing the concentration of atmospheric CO2.

Impact of disposable mask microplastics pollution on the aquatic environment and microalgae growth.

The COVID-19 pandemic has mandated people to use medical masks to protect the public. However the improper management of disposable mask waste has led to the increase of marine pollution, in terms of water quality, and the decline in aquatic microorganisms. The aim of this research was to investigate the impact of disposable mask waste on fresh water and microalgae biomass quality. Disposable masks (untreated or treated with Enterococcus faecalis) were placed in 10-L glass reactors containing fresh water or water containing algal Chlorella sp. and its growth supplements (Chlorella medium) (four 10-L reactors in total) and kept in controlled conditions for 3 months. Water and biomass yield quality were evaluated using water quality analysis, spectroscopy, scanning electron microscopy (SEM), and proximate lipid and protein analysis. Disposable masks, incubated in either fresh water or Chlorella medium, affected several water quality parameters such as chemical oxygen demand (COD), biological oxygen demand (BOD), dissolved oxygen (DO), and pH. Microplastic identification revealed that some fibers were present in the water following a 100-day treatment process. Fourier transform-infrared spectroscopy (FTIR) analysis was used to determine the change in important, organic functional groups and highlighted the disappearance of a peak at 1530 cm-1 corresponding to the primary protein (C-N) and the appearance of new peaks at 1651 cm-1 and 1270 cm-1 corresponding to methyl alcohol (CH2OH) and ketone (C = O), respectively. This indicated the detrimental effect of disposable mask fragmentation on the biomass quality. The SEM investigation has shown a damage to the surface membrane of Chlorella sp. cells. Altogether, disposable masks decreased the water quality and damaged microalgae by inhibiting their growth. Therefore, the disposable mask contaminated by various microbes, after being used by a human, may be one of the most dangerous hazards to the environment.

Nereididae (Annelida: Phyllodocida) from intertidal macroalgae in Western Australia.

The last extensive exploration of Nereididae diversity within coastal waters of Western Australia was done in 1975-1984. We collected Nereididae associated with macroalgae from 38 rocky intertidal shores of Western Australia (18°S to 34°S). Eighteen species belonging to seven genera are described and illustrated. Two new species, Nereis edentata n. sp. and Nereis yuedensis n. sp., were found. Nereis edentata n. sp. differs from other Nereis species having one row of paragnaths on Areas VII-VIII and smooth notopodial homogomph falcigers in posterior chaetigers. Nereis yuedensis n. sp. differs from other Nereis species having one row of paragnaths on Areas VII-VIII and notopodial homogomph falcigers with at least one large lateral tooth, and also species having notopodial homogomph falcigers starting from chaetiger 3. The distribution of N. yuedensis n. sp. was found to be restricted within temperate Australia and N. edentata n. sp. appears to be transitional between temperate and tropical regions. Also, we remove from synonymy the probable Western Australian endemic species, Pseudonereis rottnestiana (Augener, 1913), and provide a key to all known genera and species of Nereididae from Western Australian waters.

Novel iron sand-derived α-Fe2O3/CaO2 bifunctional catalyst for waste cooking oil-based biodiesel production.

The main aim of this work was to develop a heterogeneous Fe2O3/CaO2 bifunctional catalyst prepared from iron sand and 3 different CaO2 sources (CaCO3, Ca (OH)2, and limestone) using wet impregnation and calcination methods for biodiesel production. The effects of different CaO2 sources and Fe/Ca ratio in the catalyst were investigated to provide insight into the catalyst character and biodiesel yield. X-ray diffraction, X-ray fluorescence, and scanning electron microscopy analyses were used to characterize the catalyst. CaCO3 was concluded as the best CaO2 source, while the best Fe/Ca configuration was found to be 1:4, giving the highest biodiesel yield (97.0401%) with no diglycerides. Greater addition of Fe loading would result in an amorphous structure, and all catalysts were relatively crystalline. Fe was concluded to favor the esterification reaction and biodiesel formation, while CaO2 was seen to favor the transesterification reaction and fatty acid methyl ester (FAME) formation. The catalyst mechanism was also established in this study, where esterification of free fatty acid (FFA) and glycerol took place on the acid site to produce diglyceride and transesterification of triglyceride by methanol occurred on the basic site.

The effect of salinity on the interaction between microplastic polyethylene terephthalate (PET) and microalgae Spirulina sp.

The increasing use of plastic over the last few decades has had an impact of plastic pollution in aquatic ecosystems. Plastic pollutions may be in the form of microplastics either from primary or secondary sources. These microplastics will indirectly affect human health through the food chain. This research was aimed at evaluating the interaction between microplastic and microalgae that are a source of food supplements. The experiment was conducted by investigating the impact of microplastic polyethylene terephthalate (PET) on microalga Spirulina sp. cultivated in fresh water and saline water (7 ppt salinity) for 14 days. The growth rate and morphology of Spirulina sp. and PET were evaluated. The result showed that the presence of PET and salinity decreased Spirulina sp. growth rate in cultivation by 0.174 day-1 and reduced nutrient removal rates. However, the salinity system on medium-added PET was indicated that there are influences of Spirulina sp. against PET, where PET can be degraded by Spirulina sp. in the state of water with a salinity 7 ppt. FTIR graphic seems if there is any peak declination within PET augmentation in media with 0 ppt salinization. Nonetheless, the peak augmentation happened within PET augmentation in media with 7 ppt salinity. This signifies if there is an augmentation of PET salinization can be degraded by Spirulina sp. as the polysaccharide sources. PET is resistant to degradation due to its aromatic group. Based on the results scanning electron microscope (SEM), Spirulina sp. which growth with PET had a more uneven shape compared with a control variable.

Interaction between Styrofoam and Microalgae Spirulina platensis in Brackish Water System.

Styrofoam is a thermoplastic with special characteristics; it is an efficient insulator, is extremely lightweight, absorbs trauma, is bacteria resistant, and is an ideal packaging material, compared to other thermoplastics. The aim of this study was to analyze the interaction between Styrofoam and S. platensis. The study examined the growth of S. platensis under Styrofoam stress, changes in Styrofoam functional groups, and their interactions. The research method was culture carried out in brackish water (12 mg/L salinity) for 30 days. S. platensis yields were tested by FTIR and SEM-EDX and Styrofoam samples by FTIR. The results showed the highest growth rate of S. platensis in cultures treated with 150 mg Styrofoam that is 0.0401 day-1. FTIR analysis shows that there has been a change in the functional group on Styrofoam. At a wavelength of 3400-3200 cm-1 corresponds to the alcohol group and there was an open cyclic chain shown by the appearance of a wavelength at 1680-1600 cm-1 assignment to alkene. SEM-EDX test results show that Styrofoam can be a resource of nutrition, especially carbon for S. platensis to photosynthesize. Increased carbon content of 24.56% occurred in culture, meanwhile, Styrofoam is able to damage S. platensis cells.

Towards an optimal hybrid solar method for lime-drying behavior.

Lime is one of the most commonly consumed medicinal plants in Indonesia, which must be dried to preserve its quality, but mostly by using traditional, ineffective drying method. Therefore, this study aims to investigate lime drying process a hybrid solar drying method. The hybrid solar dryer consisted of a solar dryer and Liquefied Petroleum Gas as the supplementary heater. The drying process was conducted until there was no significant weight decrease, with the drying temperature of 40, 50, 60, 70, and 80 °C. Thin-layer modeling and quality analysis were also conducted. The experimental results indicated that 5 h was required to sufficiently dry the lime at 80 °C, while drying at 40 °C took 24 h to finish. The drying rate curve of lime suggested that lime drying mostly happened during the falling-rate period. Moreover, the average efficiency of the hybrid solar dryer ranged from 5.36% to 38.61%, which increased with temperature. From the 10 thin-layer drying models used, the Wang and Singh model was the most suitable to describe the drying behavior of lime. The effective diffusivity values of the limes and the activation energy value during hybrid solar drying were within their respective acceptable range for agricultural products. However, as the drying temperature was increased from 40 to 80 °C, the total phenolic content and vitamin C content decreased, from 87.3 to 27.8 mg GAE/100 g dry limes and 0.118 to 0.015 ppm, respectively. It can be concluded that hybrid solar dryer is able to sufficiently dry the lime, with acceptable drying time and dryer efficiency, although using high drying temperature will decrease the quality of dried lime. Further modifications and improvements to the hybrid solar dryer are required to maximize the quality of dried lime while still maintaining fast and effective drying process.

Preparation of KI/Hydroxyapatite Catalyst from Phosphate Rocks and Its Application for Improvement of Biodiesel Production.

The main aim of this work was to investigate the suitability of a KI/KIO3 impregnated hydroxyapatite (HAP) catalyst derived from natural phosphate rocks for biodiesel production. This study evaluated the effect of impregnation concentrations (1-6% w/w) on the catalyst performance in biodiesel production. The biodiesel was produced from waste cooking oil (WCO) under simultaneous esterification-transesterification reactions at 60 °C for 6 h. The results showed that the biodiesel yield increased by increasing impregnation concentration and the maximum yield (91.787%) was achieved at an impregnation concentration of 5% w/w. The KI/HAP catalyst showed better performance (91.78% biodiesel yield, 59.1% FAME yield and surface area of 13.513 m2/g) as compared to the KIO3/HAP catalyst (90.07% biodiesel yield, 55.0% FAME yield and surface area of 10.651 m2/g).

Evaluation of polypropylene plastic degradation and microplastic identification in sediments at Tambak Lorok coastal area, Semarang, Indonesia.

This study aims to determine the degradation of plastic polypropylene (PP) and identify the presence of microplastic in sediments and seawater along the Tambak Lorok coastal area. The study was conducted by collecting samples from the sea surface area, at 50 cm and 170 cm depths, while seawater and sediments were collected from six stations. The results showed an early stage of degradation because of abiotic factors. The surface morphology of plastic changed, indicating the disorientation of the plastic. Furthermore, the results demonstrated that organic carbon decreased by 3.15%, 6.67%, and 16.76% for the PP applied on surface water, at 50 cm depth and at 170 cm depth, respectively. From six stations, PP microplastic was the dominant type, where microplastic in sediment was bio-fouled fiber ranging in size from 255.23 to 1245.71 µm; however, in seawater, it was 7-111 particles/10 mL and ranged from 270.27 to 1279.12 µm in size.