Robin Sequence: 5-Year Speech Outcomes-A Case-Control Study.

BACKGROUND: Pierre Robin sequence (Robin sequence) is defined as the triad of micrognathia, glossoptosis, and airway obstruction. It is frequently associated with palatal clefting. In recent years, increased interest in speech outcomes of cleft patients diagnosed with Robin sequence has been shown. METHODS: Speech outcomes of cleft patients with Robin sequence were assessed at age 5 in comparison with a cleft palate-only cohort. Speech parameters were evaluated according to the Cleft Audit Protocol for Speech-Augmented and analyzed using the National Audit Standards for Speech (United Kingdom). All patients were treated in the same institution during the same period (2005 to 2012). Subjects who needed nasopharyngeal airway support and those whose airway was managed by positioning only were eligible. RESULTS: Fifty-one cleft patients diagnosed with Robin sequence were included in this study. Outcomes were compared to those of 128 nonsyndromic cleft palate-only patients.Patients with Robin sequence were shown to present with a significantly higher rate of cleft speech characteristics in comparison to the reference cohort (p = 0.001). Furthermore, it was shown that Robin sequence is associated with a significantly higher rate of secondary speech surgery for velopharyngeal dysfunction before the age of 5 (p = 0.016). Robin sequence patients with a nasopharyngeal airway presented with a higher rate of cleft speech characteristics compared to Robin sequence patients managed with positioning only. CONCLUSION: Cleft patients with Robin sequence are more likely to need further surgery to correct velopharyngeal dysfunction before the age of 5 and are more prone to present with cleft speech characteristics at the age of 5. CLINICAL QUESTION/LEVEL OF EVIDENCE: Risk, II.

Custom-made 3D-printed face masks in case of pandemic crisis situations with a lack of commercially available FFP2/3 masks.

In the case of pandemic crisis situations, a crucial lack of protective material such as protective face masks for healthcare professionals can occur. A proof of concept (PoC) and prototype are presented, demonstrating a reusable custom-made three-dimensionally (3D) printed face mask based on materials and techniques (3D imaging and 3D printing) with global availability. The individualized 3D protective face mask consists of two 3D-printed reusable polyamide composite components (a face mask and a filter membrane support) and two disposable components (a head fixation band and a filter membrane). Computer-aided design (CAD) was used to produce the reusable components of the 3D face mask based on individual facial scans, which were acquired using a new-generation smartphone with two cameras and a face scanning application. 3D modelling can easily be done by CAD designers worldwide with free download software. The disposable non-woven melt-blown filter membrane is globally available from industrial manufacturers producing FFP2/3 protective masks for painting, construction, agriculture, and the textile industry. Easily available Velcro fasteners were used as a disposable head fixation band. A cleaning and disinfection protocol is proposed. Leakage and virological testing of the reusable components of the 3D face mask, following one or several disinfection cycles, has not yet been performed and is essential prior to its use in real-life situations. This PoC should allow the reader to consider making and/or virologically testing the described custom-made 3D-printed face masks worldwide. The surface tessellation language (STL) format of the original virtual templates of the two reusable components described in this paper can be downloaded free of charge using the hyperlink (Supplementary Material online).

A worldwide comparison of the management of surgical treatment of advanced oral cancer.

INTRODUCTION: Microvascular surgery following tumor resection has become an important field of oral and maxillofacial surgery (OMFS). Following the results from management of T1/T2 floor-of-mouth and tongue squamous cell carcinoma (SCC) in German-speaking countries, Europe, and worldwide, this paper presents specific concepts for the management of resection and reconstruction of T3/T4 SCC of the maxillary and mandibular alveolar process and tongue. METHODS: The DÖSAK questionnaire was distributed in three different phases to a growing number of maxillofacial units worldwide. Within this survey, clinical patient settings were presented to participants and center-specific treatment strategies were evaluated. RESULTS: A total of 188 OMFS units from 36 different countries documented their treatment strategies for T3/T4 maxillary and mandibular alveolar process and tongue SCC. The extent of surgical resections and subsequent reconstructions is more consistent than with T1/T2 tumors, although the controversy surrounding continuity resections and mandible-sparing procedures remains. For continuity resection of the mandible the fibula free flap is the most frequently used bone replacement, whereas maxilla reconstruction concepts are less consistent, ranging from locoregional coverage concepts and different microvascular reconstruction options to treatment via obturator prosthesis. CONCLUSION: Results from treatment strategies for T3/T4 tumors underline the limited evidence for the appropriate amount of resection and subsequent reconstruction process, especially in cases involving the mandible. Prospective randomized trials will be necessary in the long term to establish valid treatment guidelines.

A worldwide comparison of the management of T1 and T2 anterior floor of the mouth and tongue squamous cell carcinoma - Extent of surgical resection and reconstructive measures.

INTRODUCTION: Microvascular surgery following tumor resection has become an important field of oral maxillofacial surgery (OMFS). Following the results on general aspects of current reconstructive practice in German-speaking countries, Europe and worldwide, this paper presents specific concepts for the management of resection and reconstruction of T1/T2 squamous cell carcinoma (SCC) of the anterior floor of the mouth and tongue. METHODS: The DOESAK questionnaire was distributed in three different phases to a growing number of maxillofacial units worldwide. Within this survey, clinical patient settings were presented to participants and center-specific treatment strategies were evaluated. RESULTS: A total of 188 OMFS units from 36 different countries documented their treatment strategies for T1/T2 anterior floor of the mouth squamous cell carcinoma and tongue carcinoma. For floor of mouth carcinoma close to the mandible, a wide variety of concepts are presented: subperiosteal removal of the tumor versus continuity resection of the mandible and reconstruction ranging from locoregional closure to microvascular bony reconstruction. For T2 tongue carcinoma, concepts are more uniform. CONCLUSION: These results demonstrate the lack of evidence and the controversy of different guidelines for the extent of safety margins and underline the crucial need of global prospective randomized trials on this topic to finally obtain evidence for a common guideline based on a strong community of OMFS units.

Microsurgical reconstruction of the head and neck region: Current concepts of maxillofacial surgery units worldwide.

INTRODUCTION: Microvascular surgery following tumor resection has become an important field of oral maxillofacial surgery (OMFS). Following the surveys on current reconstructive practice in German-speaking countries and Europe, this paper presents the third phase of the project when the survey was conducted globally. METHODS: The DOESAK questionnaire has been developed via a multicenter approach with maxillofacial surgeons from 19 different hospitals in Germany, Austria and Switzerland. It was distributed in three different phases to a growing number of maxillofacial units in German-speaking clinics, over Europe and then worldwide. RESULTS: Thirty-eight units from Germany, Austria and Switzerland, 65 remaining European OMFS-departments and 226 units worldwide responded to the survey. There is wide agreement on the most commonly used flaps, intraoperative rapid sections and a trend towards primary bony reconstruction. No uniform concepts can be identified concerning osteosynthesis of bone transplants, microsurgical techniques, administration of supportive medication and postoperative monitoring protocols. Microsurgical reconstruction is the gold standard for the majority of oncologic cases in Europe, but worldwide, only every second unit has access to this technique. CONCLUSION: The DOESAK questionnaire has proven to be a valid and well accepted tool for gathering information about current practice in reconstructive OMFS surgery. The questionnaire has been able to demonstrate similarities, differences and global inequalities.

Digital three-dimensional image fusion processes for planning and evaluating orthodontics and orthognathic surgery. A systematic review.

The three important tissue groups in orthognathic surgery (facial soft tissues, facial skeleton and dentition) can be referred to as a triad. This triad plays a decisive role in planning orthognathic surgery. Technological developments have led to the development of different three-dimensional (3D) technologies such as multiplanar CT and MRI scanning, 3D photography modalities and surface scanning. An objective method to predict surgical and orthodontic outcome should be established based on the integration of structural (soft tissue envelope, facial skeleton and dentition) and photographic 3D images. None of the craniofacial imaging techniques can capture the complete triad with optimal quality. This can only be achieved by 'image fusion' of different imaging techniques to create a 3D virtual head that can display all triad elements. A systematic search of current literature on image fusion in the craniofacial area was performed. 15 articles were found describing 3D digital image fusion models of two or more different imaging techniques for orthodontics and orthognathic surgery. From these articles it is concluded, that image fusion and especially the 3D virtual head are accurate and realistic tools for documentation, analysis, treatment planning and long term follow up. This may provide an accurate and realistic prediction model.

Non-surgical risk factors for condylar resorption after orthognathic surgery.

BACKGROUND: Condylar resorption following orthognathic surgery is an important cause of late skeletal relapse. However, its pathogenesis is not well understood. The purpose of this study was to find non-surgical risk factors for condylar resorption after orthognathic surgery. PATIENTS: In this retrospective study, 17 patients (Group I) who developed postoperative condylar resorption were selected. These patients were compared with 22 patients (Group II) without postoperative condylar resorption, but who showed mandibular hypoplasia with a preoperative high mandibular plane angle of more than 40 degrees. METHODS: Possible non-surgical risk factors were sought by analysing clinical and radiological data collected preoperatively and immediately, 6 weeks, and 1 and 2 years postoperatively. RESULTS: There was no significant difference of gender distribution between the two groups. Patients in Group I were significantly younger (p=0.02) than those in Group II. The incidence of temporomandibular joint dysfunction in both groups was similar preoperatively, but was significantly higher (p=0.001) postoperatively in Group I. The posterior inclination of the condylar neck in Group I was also significantly greater (p<0.001). The preoperative mandibular plane angle in Group I (mean value: 49.4 degrees ) was significantly greater (p=0.005) than in Group II (mean value: 44.9 degrees ). The preoperative SNB angle, overbite, and posterior facial height and ratio (posterior/anterior facial heights) in Group I were significantly smaller (p<0.05). CONCLUSION: The present study suggests that the posteriorly inclined condylar neck should be considered as a relevant non-surgical risk factor.