Characterization and application of LDH with chitosan composites investigated by positron annihilation lifetime spectroscopy and surface texture for the adsorption of methyl orange.

With a rapid increase in industrial growth around the world, the demand for an entirely novel category of nanoparticles and technologies for wastewater treatment has become a key concern for environmental protection. Recently, hybrids of layered double hydroxides (LDH), particularly those containing LDH, have gained attention as potential nanoscale adsorbents for water treatment. Recent research has shown that LDH-containing composites are interesting versatile materials with the ability to be used in energy storage, photocatalysis, nanocomposites, and water treatment. In the current work, LDH-containing composites were utilized as adsorbents for the purpose of purifying water. The adsorbents investigated are Zn-Co-Fe/LDH/Chitosan-in situ sample preparation (LDH/CS1) and Zn-Co-Fe/LDH/Chitosan-ex situ sample preparation (LDH/CS2). Furthermore, LDH/CS1 and LDH/CS2 were investigated for wastewater treatment from methyl orange dye (MO) with various adsorption conditions. When the initial MO concentration was 20 mg/L and the amount of adsorbent was 0.1 g, the removal efficiency reached 72.8 and 91.7% for LDH/CS1 and LDH/CS2, respectively. The MO's maximum adsorption capabilities are 160.78 and 165.89 mg/g for LDH/CS1 and LDH/CS2, respectively, which is much greater than that of comparable commercial adsorbents. MO adsorption onto LDH/CS1 and LDH/CS2 was best characterized by the pseudo-second-order kinetic model. The equilibrium adsorption data was followed by the Freundlich and Langmuir models. The adsorption is favorable as evidenced by the equilibrium parameter RL values for MO adsorption onto LDH/CS1 and LDH/CS2, which were 0.227 and 0.144, respectively. Using the free volume distribution method and the positron annihilation lifetime technique, the nanostructure of the materials was examined.

Textural properties and adsorption behavior of Zn-Mg-Al layered double hydroxide upon crystal violet dye removal as a low cost, effective, and recyclable adsorbent.

The preparation of adsorbents plays a vital role in the adsorption method. In particular, many adsorbents with high specific surface areas and unique shapes are essential for the adsorption strategy. A Zn-Mg-Al/layer double hydroxide (LDH) was designed in this study using a simple co-precipitation process. Adsorbent based on Zn-Mg-Al/LDH was used to remove crystal violet (CV) from the wastewater. The impacts of the initial dye concentration, pH, and temperature on CV adsorption performance were systematically examined. The adsorbents were analyzed both before and after adsorption using FTIR, XRD, and SEM. The roughness parameters and surface morphologies of the produced LDH were estimated using 3D SEM images. Under the best conditions (dose of adsorbent = 0.07 g and pH = 9), the maximum adsorption capacity has been achieved. Adsorption kinetics studies revealed that the reaction that led to the adsorption of CV dye onto Zn-Mg-Al/LDH was a pseudo-second-order model. Additionally, intraparticle diffusion suggests that Zn-Mg-Al/LDH has a fast diffusion constant for CV molecules (0.251 mg/(g min1/2)). Furthermore, as predicted by the Langmuir model, the maximal Zn-Mg-Al/LDH adsorption capacity of CV was 64.80 mg/g. The CV dimensionless separation factor (RL) onto Zn-Mg-Al/LDH was 0.769, indicating that adsorption was favorable. The effect of temperature was performed at 25, 35, and 45 °C in order to establish the thermodynamic parameters ∆Ho, ∆So, and ∆Go. The computed values indicated exothermic and spontaneous adsorption processes. The study presented here might be used to develop new adsorbents with enhanced adsorption capabilities for the purpose of protecting the water environment.

Valorization of spent double substituted Co-Ni-Zn-Fe LDH wastewater nanoadsorbent as methanol electro-oxidation catalyst.

Finding suitable non-expensive electrocatalyst materials for methanol oxidation is a significant challenge. Waste valorization of spent wastewater nanoadsorbents is a promising route toward achieving circular economy guidelines. In this study, the residual of layered double hydroxide (LDH) can be used as an electrocatalyst in direct methanol fuel cells as a novel approach. The Co-Ni-Zn-Fe LDH was prepared by the co-precipitation method followed by the adsorption of methyl orange (MO). Moreover, the spent adsorbent was calcined at different temperatures (200, 400, and 600 °C) to be converted to the corresponding mixed metal oxides (MMO). The prepared samples were characterized using XRD, FTIR, HRTEM, zeta potential, and hydrodynamic size measurements. The spent adsorbent was tested as an electro-catalyst for direct methanol electro-oxidation. The spent LDH/MO adsorbent showed a maximum current density of 6.66 mA/cm2 at a 50 mV/s scan rate and a 1 M methanol concentration. The spent MMO/MO adsorbent showed a maximum current density of 8.40 mA/cm2 at a 200 °C calcination temperature, 50 mV/s scan rate, and a 3 M methanol concentration. Both samples show reasonable stability over time, as indicated by the chronoamperometric response. Further nanoengineering of used nanoadsorbents could be a promising path to repurposing these wastes as electro-oxidation catalysts.