Matrix diffusion coefficients in volcanic rocks at the Nevada test site: influence of matrix porosity, matrix permeability, and fracture coating minerals.

Diffusion cell experiments were conducted to measure nonsorbing solute matrix diffusion coefficients in forty-seven different volcanic rock matrix samples from eight different locations (with multiple depth intervals represented at several locations) at the Nevada Test Site. The solutes used in the experiments included bromide, iodide, pentafluorobenzoate (PFBA), and tritiated water ((3)HHO). The porosity and saturated permeability of most of the diffusion cell samples were measured to evaluate the correlation of these two variables with tracer matrix diffusion coefficients divided by the free-water diffusion coefficient (D(m)/D*). To investigate the influence of fracture coating minerals on matrix diffusion, ten of the diffusion cells represented paired samples from the same depth interval in which one sample contained a fracture surface with mineral coatings and the other sample consisted of only pure matrix. The log of (D(m)/D*) was found to be positively correlated with both the matrix porosity and the log of matrix permeability. A multiple linear regression analysis indicated that both parameters contributed significantly to the regression at the 95% confidence level. However, the log of the matrix diffusion coefficient was more highly-correlated with the log of matrix permeability than with matrix porosity, which suggests that matrix diffusion coefficients, like matrix permeabilities, have a greater dependence on the interconnectedness of matrix porosity than on the matrix porosity itself. The regression equation for the volcanic rocks was found to provide satisfactory predictions of log(D(m)/D*) for other types of rocks with similar ranges of matrix porosity and permeability as the volcanic rocks, but it did a poorer job predicting log(D(m)/D*) for rocks with lower porosities and/or permeabilities. The presence of mineral coatings on fracture walls did not appear to have a significant effect on matrix diffusion in the ten paired diffusion cell experiments.

Testing and parameterizing a conceptual solute transport model in saturated fractured tuff using sorbing and nonsorbing tracers in cross-hole tracer tests.

Two cross-hole tracer tests involving the simultaneous injection of two nonsorbing solute tracers with different diffusion coefficients (bromide and pentafluorobenzoate) and one weakly sorbing solute tracer (lithium ion) were conducted in two different intervals at the C-wells complex near the site of a potential high-level nuclear waste repository at Yucca Mountain, NV. The tests were conducted to (1) test a conceptual radionuclide transport model for saturated, fractured tuffs near Yucca Mountain and (2) obtain transport parameter estimates for predictive modeling of radionuclide transport. The differences between the responses of the two nonsorbing tracers and the sorbing tracer (when normalized to injection masses) were consistent with a dual-porosity transport system in which matrix diffusion was occurring. The concentration attenuation of the sorbing tracer relative to the nonsorbing tracers suggested that diffusion occurred primarily into matrix pores, not simply into stagnant water within the fractures. The K(d) values deduced from the lithium responses were generally larger than K(d) values measured in laboratory batch sorption tests using crushed C-wells cores. This result supports the use of laboratory-derived K(d) values for predicting sorbing species transport at the site, as the laboratory K(d) values would result in underprediction of sorption and hence conservative transport predictions. The tracer tests also provided estimates of effective flow porosity and longitudinal dispersivity at the site. The tests clearly demonstrated the advantages of using multiple tracers of different physical and chemical characteristics to distinguish between alternative conceptual transport models and to obtain transport parameter estimates that are better constrained than can be obtained using only a single tracer or using multiple nonsorbing tracers without a sorbing tracer.