Carbon-free high-loading silicon anodes enabled by sulfide solid electrolytes.

The development of silicon anodes for lithium-ion batteries has been largely impeded by poor interfacial stability against liquid electrolytes. Here, we enabled the stable operation of a 99.9 weight % microsilicon anode by using the interface passivating properties of sulfide solid electrolytes. Bulk and surface characterization, and quantification of interfacial components, showed that such an approach eliminates continuous interfacial growth and irreversible lithium losses. Microsilicon full cells were assembled and found to achieve high areal current density, wide operating temperature range, and high areal loadings for the different cells. The promising performance can be attributed to both the desirable interfacial property between microsilicon and sulfide electrolytes and the distinctive chemomechanical behavior of the lithium-silicon alloy.

Lithium metal deposition/dissolution under uniaxial pressure with high-rigidity layered polyethylene separator.

The effects of mechanical uniaxial pressure and deflection of the separator on the electrochemical deposition of lithium metal were investigated. Instead of dendritic lithium growth without pressure, a much more dense and compact deposition can be achieved when pressure is applied to the cells during the lithium deposition process. This morphology is due to the formation of granular lithium followed by the generation of new lithium nuclei on the cathode surface. The improved lithium plating/stripping behavior in the cells under mechanical pressure yielded a 10% higher coulombic efficiency than cells without pressure. However, the cycle life is shortened with pressures higher than 1.39 MPa; therefore, there is an upper limit for improvement of the electrochemical characteristics near 1.39 MPa. The morphology of electrodeposited lithium becomes flatter with a large amount of electrodeposition under pressure when the number of polyethylene separators is increased to five due to the increase in the stiffness of the layered separators. Furthermore, high coulombic efficiency cycling by pressurization was increased to twice that for one separator sheet. Application of the optimal strength pressure and use of more inflexible separators are thus effective methods to control the microscopic morphology of electrodeposited lithium and improve the cycle performance of the lithium metal anode.

Modulation of hydrogel nanoparticle intracellular trafficking by multivalent surface engineering with tumor targeting peptide.

Surface engineering of a hydrogel nanoparticle (NP) with the tumor-targeting ligand, F3 peptide, enhances both the NP's binding affinity for, and internalization by, nucleolin overexpressing tumor cells. Remarkably, the F3-functionalized NPs consistently exhibited significantly lower trafficking to the degradative lysosomes than the non-functionalized NPs, in the tumor cells, after internalization. This is attributed to the non-functionalized NPs, but not the F3-functionalized NPs, being co-internalized with Lysosome-associated Membrane Protein-1 (LAMP1) from the surface of the tumor cells. Furthermore, it is shown that the intracellular trafficking of the F3-functionalized NPs differs significantly from that of the molecular F3 peptides (untethered to NPs). This has important implications for designing effective, chemically-responsive, controlled-release and multifunctional nanodrugs for multi-drug-resistant cancers.

Multifunctional biodegradable polyacrylamide nanocarriers for cancer theranostics--a "see and treat" strategy.

We describe here the development of multifunctional nanocarriers, based on amine-functionalized biodegradable polyacrylamide nanoparticles (NPs), for cancer theranostics, including active tumor targeting, fluorescence imaging, and photodynamic therapy. The structural design involves adding primary amino groups and biodegradable cross-linkers during the NP polymerization, while incorporating photodynamic and fluorescent imaging agents into the NP matrix, and conjugating PEG and tumor-targeting ligands onto the surface of the NPs. The as-synthesized NPs are spherical, with an average diameter of 44 nm. An accelerated biodegradation study, using sodium hydroxide or porcine liver esterase, indicated a hydrogel polymer matrix chain collapse within several days. By using gel permeation chromatography, small molecules were detected, after the degradation. In vitro targeting studies on human breast cancer cells indicate that the targeted NPs can be transported efficiently into tumor cells. Incubating the multifunctional nanocarriers into cancer cells enabled strong fluorescence imaging. Irradiation of the photosensitizing drug, incorporated within the NPs, with light of a suitable wavelength, causes significant but selective damage to the impregnated tumor cells, but only inside the illuminated areas. Overall, the potential of polymeric-based NPs as biodegradable, multifunctional nanocarriers, for cancer theranostics, is demonstrated here.

Hydrogel nanoparticles with covalently linked coomassie blue for brain tumor delineation visible to the surgeon.

Delineation of tumor margins is a critical and challenging objective during brain cancer surgery. A tumor-targeting deep-blue nanoparticle-based visible contrast agent is described, which, for the first time, offers in vivo tumor-specific visible color staining. This technology thus enables color-guided tumor resection in real time, with no need for extra equipment or special lighting conditions. The visual contrast agent consists of polyacrylamide nanoparticles covalently linked to Coomassie Blue molecules (for nonleachable blue color contrast), which are surface-conjugated with polyethylene glycol and F3 peptides for efficient in vivo circulation and tumor targeting, respectively.

Novel methods to incorporate photosensitizers into nanocarriers for cancer treatment by photodynamic therapy.

OBJECTIVE: A hydrophobic photosensitizer, 2-[1-hexyloxyethyl]-2-devinyl pyropheophorbide-a (HPPH), was loaded into nontoxic biodegradable amine functionalized polyacrylamide (AFPAA) nanoparticles using three different methods (encapsulation, conjugation, and post-loading), forming a stable aqueous dispersion. Each formulation was characterized for physicochemical properties as well as for photodynamic performance so as to determine the most effective nanocarrier formulation containing HPPH for photodynamic therapy (PDT). MATERIALS AND METHODS: HPPH or HPPH-linked acrylamide was added into monomer mixture and polymerized in a microemulsion for encapsulation and conjugation, respectively. For post-loading, HPPH was added to an aqueous suspension of pre-formed nanoparticles. Those nanoparticles were tested for optical characteristics, dye loading, dye leaching, particle size, singlet oxygen production, dark toxicity, in vitro photodynamic cell killing, whole body fluorescence imaging and in vivo PDT. RESULTS: HPPH was successfully encapsulated, conjugated or post-loaded into the AFPAA nanoparticles. The resultant nanoparticles were spherical with a mean diameter of 29 ± 3 nm. The HPPH remained intact after entrapment and the HPPH leaching out of nanoparticles was negligible for all three formulations. The highest singlet oxygen production was achieved by the post-loaded formulation, which caused the highest phototoxicity in in vitro assays. No dark toxicity was observed. Post-loaded HPPH AFPAA nanoparticles were localized to tumors in a mouse colon carcinoma model, enabling fluorescence imaging, and producing a similar photodynamic tumor response to that of free HPPH in equivalent dose. CONCLUSIONS: Post-loading is the promising method for loading nanoparticles with hydrophobic photosensitizers to achieve effective in vitro and in vivo PDT.

Methylene blue covalently loaded polyacrylamide nanoparticles for enhanced tumor-targeted photodynamic therapy.

The use of targeted nanoparticles (NPs) as a platform for loading photosensitizers enables selective accumulation of the photosensitizers in the tumor area, while maintaining their photodynamic therapy (PDT) effectiveness. Here two novel kinds of methylene blue (MB)-conjugated polyacrylamide (PAA) nanoparticles, MBI-PAA NPs and MBII-PAA NPs, based on two separate MB derivatives, are developed for PDT. This covalent conjugation with the NPs (i) improves the loading of MB, (ii) prevents any leaching of MB from the NPs and (iii) protects the MB from the effects of enzymes in the biological environment. The loading of MB into these two kinds of NPs was controlled by the input amount, resulting in concentrations with optimal singlet oxygen production. For each of the MB-NPs, the highest singlet oxygen production was found for an MB loading of around 11 nmol mg(-1). After attachment of F3 peptide groups, for targeting, each of these NPs was taken up, selectively, by MDA-MB-435 tumor cells, in vitro. PDT tests demonstrated that both kinds of targeted NPs resulted in effective tumor cell kill, following illumination, while not causing dark toxicity.

Methylene blue-conjugated hydrogel nanoparticles and tumor-cell targeted photodynamic therapy.

Methylene blue-conjugated polyacrylamide nanoparticles are prepared through a microemulsion polymerization, after conjugation of the dye with a monomer. The nanoparticles have a 50-60 nm diameter in solution. This conjugation method enables a large increase in loading of methylene blue per nanoparticle and also minimizes dye leaching out of the nanoparticle. Furthermore, the dye content can be controlled by variation of the dye amount, enabling a more refined control of the singlet oxygen production ability. The nanoparticles are coated with F3 peptides, which give specific targeting to selected tumor cells, 9L, MDA-MB-435, and F98, in vitro. In addition, MTT assays reveal that the nanoparticles have no dark toxicity but excellent PDT efficacy increasing with the nanoparticle dose and irradiation time.

Targeted Blue Nanoparticles as Photoacoustic Contrast Agent for Brain Tumor Delineation.

Distinguishing a tumor from non-neoplastic tissue is a challenging task during cancer surgery. Several attempts have been made to use visible or fluorescent agents to aid in the visualization of a tumor during surgery. We describe a novel method to delineate brain tumors, using a highly sensitive photoacoustic imaging technique that is enhanced by tumor-targeting blue nanoparticles serving as a contrast agent. Experiments on phantoms and on rat brains, ex vivo, demonstrate the high sensitivity of photoacoustic imaging in delineating tumors containing contrast agent at a concentration much lower than needed for visualization by the naked eye. The limit of detection of the system for the nanoparticles is about 0.77 µg/mL in water (equivalent to 0.84 µmol/L Coomassie Blue dye). The present exploratory study suggests that photoacoustic imaging, when used with strongly optical absorbing contrast agents, could facilitate cancer surgery intraoperatively by revealing the distribution and extent of the tumor.

In vitro characterization of a targeted, dye-loaded nanodevice for intraoperative tumor delineation.

OBJECTIVE: To synthesize and complete in vitro characterization of a novel, tumor-targeted nanodevice for visible intraoperative delineation of brain tumors. METHODS: The ability of dye-loaded polyacrylamide nanoparticles (NP) containing methylene blue, Coomassie blue, or indocyanine green to cause color change in the 9L glioma cell lines was evaluated. Cells were incubated with dye-loaded NPs, photographed, and analyzed colorimetrically. Confocal microscopy was used to determine subcellular localization of NPs in treated cells. RESULTS: Incubation of glioma cell lines with dye-loaded NPs resulted in clearly visible, quantifiable cell tagging in a dose- and time-dependent manner. Dye-loaded NPs were observed to bind to the surface and become internalized by glioma cells. Coating the NP surface with F3, a peptide that binds to the tumor cell surface receptor nucleolin, significantly increased NP affinity for glioma cells. F3 targeting also significantly increased the rate of cell tagging by dye-loaded NPs. Finally, F3-targeted NPs demonstrated specificity for targeting various cancer cell lines based on their surface expression of cell surface nucleolin. CONCLUSION: F3-targeted dye-loaded NPs efficiently cause definitive color change in glioma cells. This report represents the first use of targeted NPs to cause a visible color change in tumor cell lines. Similar nanodevices may be used in the future to enable visible intraoperative tumor delineation during tumor resection.

Self-assembly growth process for polyhedral oligomeric silsesquioxane cubic crystals.

The colloidal self-assembly process for the formation of polyhedral oligomeric silsesquioxane cubic crystals is described; the growth process consists of the formation of spherical particles, one-dimensional particle chains, bundles of chains, and finally, the formation of cubic crystals.

New synthetic route for preparing rattle-type silica particles with metal cores.

Rattle-type silica particles with metal cores, applicable to catalysts and metal/inorganic composite coating materials, were prepared by the pre-shell/post-core method that can control the size of metal cores inside silica capsules and exchange from metal cores into different ones with a metal displacement reaction.