Advancing towards practice: A novel LC-MS/MS method for detecting retinol in dried blood spots.

BACKGROUND: To date, clinical laboratories face challenges in quantifying retinol from DBS samples. Disputes arise throughout the whole detection process, encompassing the storage condition, the release strategy as well as the selection of internal standards. METHODS: We incubated DBS with ascorbic acid solution. Then, retinol-d4 in acetonitrile was introduced to incorporate isotopic internal standard and promote protein precipitation. Afterward, sodium carbonate solution was added to ionize cytochromes (such as bilirubin), which amplified the difference of their hydrophobicity to retinol. Subsequently, cold-induced phase separation could be facilitated to separate retinol from the impurities. In the end, the upper layer was injected for LC-MS/MS analysis. RESULTS: By comparing the detected retinol content in whole blood and DBS samples prepared from the same volume, we confirmed the established pretreatment was capable to extract most of retinol from DBS (recovery >90 %). Thereafter, we verified that within DBS, retinol possessed satisfying stability without antioxidation. Indoor-light exposure and storage duration would not cause obvious degradation (<10 %). Following systematic validation, the established method well met the criteria outlined in the relevant guidelines. After comparing with detected DBS results to the paired plasma samples, 54 out of 60 met the acceptance limit for cross-validation of ±20 %. CONCLUSIONS: We realized precise quantification of retinol from one 3.2 mm DBS disc. By circumventing conventional antioxidation, liquid-liquid/solid-phase extraction and organic solvent evaporation, the pretreatment could be completed within 15 min consuming only minimal amounts of low-toxicity chemicals (ascorbic acid, acetonitrile, and sodium carbonate). We expect this contribution holds the potential to significantly facilitate the evaluation of patients' vitamin A status by using DBS samples in the future.

Mini-review: research and progress of oxeiptosis in diseases.

Oxeiptosis is a novel cell death pathway that was introduced in 2018. As a form of regulated cell death, it operates independently of caspases and is induced by ROS. Distinguished from other cell death pathways such as apoptosis, necroptosis, pyroptosis, and ferroptosis, oxeiptosis features unique damage causes pivotal genes, and signaling pathways (KEAP1/PGAM5/AIFM1). Emerging studies indicate that oxeiptosis plays a significant role in the progression of various diseases and its regulation could serve as a promising therapeutic target. However, the precise molecular mechanisms underlying oxeiptosis remain to be fully elucidated. In this mini-review, we systematically summarize the latest developments in oxeiptosis-related diseases while detailing the molecular mechanisms and regulatory networks of oxeiptosis. These insights offer a foundation for a deeper understanding of oxeiptosis.

A global transcriptional activator involved in the iron homeostasis in cyanobacteria.

Cyanobacteria use a series of adaptation strategies and a complicated regulatory network to maintain intracellular iron (Fe) homeostasis. Here, a global activator named IutR has been identified through three-dimensional chromosome organization and transcriptome analysis in a model cyanobacterium Synechocystis sp. PCC 6803. Inactivation of all three homologous IutR-encoding genes resulted in an impaired tolerance of Synechocystis to Fe deficiency and loss of the responses of Fe uptake-related genes to Fe-deplete conditions. Protein-promoter interaction assays confirmed the direct binding of IutR with the promoters of genes related to Fe uptake, and chromatin immunoprecipitation sequencing analysis further revealed that in addition to Fe uptake, IutR could regulate many other physiological processes involved in intracellular Fe homeostasis. These results proved that IutR is an important transcriptional activator, which is essential for cyanobacteria to induce Fe-deficiency response genes. This study provides in-depth insights into the complicated Fe-deficient signaling network and the molecular mechanism of cyanobacteria adaptation to Fe-deficient environments.

A photoluminescent hydrogen-bonded biomass aerogel for sustainable radiative cooling.

Passive radiant cooling is a potentially sustainable thermal management strategy amid escalating global climate change. However, petrochemical-derived cooling materials often face efficiency challenges owing to the absorption of sunlight. We present an intrinsic photoluminescent biomass aerogel, which has a visible light reflectance exceeding 100%, that yields a large cooling effect. We discovered that DNA and gelatin aggregation into an ordered layered aerogel achieves a solar-weighted reflectance of 104.0% in visible light regions through fluorescence and phosphorescence. The cooling effect can reduce ambient temperatures by 16.0°C under high solar irradiance. In addition, the aerogel, efficiently produced at scale through water-welding, displays high reparability, recyclability, and biodegradability, completing an environmentally conscious life cycle. This biomass photoluminescence material is another tool for designing next-generation sustainable cooling materials.

Multiple free-radical-trapping and hydrogen-bonding-enhanced polyurethane foams with long-lasting flame retardancy, aging resistance, and toughness.

Flexible polyurethane foam (FPUF) is a ubiquitous material utilized in furniture cushions, mattresses, and various technical applications. Despite the widespread use, FPUF faces challenges in maintaining long-lasting flame retardancy and aging resistance, particularly in harsh environments, while retaining mechanical robustness. Here, we present a novel approach to address these issues by enhancing FPUF through multiple free-radical-trapping and hydrogen-bonding mechanisms. A hindered amine phosphorus-containing polyol (DTAP) was designed and chemically introduced into FPUF. The distinctive synergy between hindered amine and phosphorus-containing structures enables the formation of multiple hydrogen bonds with urethane, while also effectively capturing free radicals across a broad temperature spectrum. As a result, incorporating only 5.1 wt% of DTAP led to the material successfully passing vertical burning tests and witnessing notable enhancements in tensile strength, elongation at break, and tear strength. Even after enduring accelerated thermal aging for 168 hours, the foam maintained exceptional flame retardancy and mechanical properties. This study offers novel insights into material enhancement, simultaneously achieving outstanding long-lasting flame retardancy, toughness, and anti-aging performance.

Organic solvents-free and ambient-pressure drying melamine formaldehyde resin aerogels with homogeneous structures, outstanding mechanical strength and flame retardancy.

Atmospheric drying method for fabricating aerogels is considered the most promising way for casting aerogels on a large scale. However, the organic solvent exchange, remaining environmental pollution risk, is a crucial step in mitigating the impact of surface tension during the atmospheric drying process, especially for wet gel formed through the alkoxy-derived sol-gel process, such as melamine-formaldehyde resin (MF) aerogel. Herein, a tough polymer-assisted in situ polymerization was proposed to fabricate MF resin aerogel with a combination of mechanical toughness and strength, enabling it to withstand the capillary force during water evaporation. The monolithic MF resin aerogel through the sol-gel method can be directly prepared without additional network strengthening or organic solvent exchange. The resulting MF resin aerogel exhibits a homogeneous as well as hierarchical structure with macropores and mesopores (~6 µm and ~5 nm), high compressive modulus of 31.8 MPa, self-extinguishing property, and high-temperature thermal insulation with 97 % heat decrease for butane flame combustion. This work presents a straightforward and environmentally friendly method for fabricating MF resin aerogels with nanostructures and excellent performance in open conditions, exhibiting various applications.

Unraveling the Origin of Multichannel Circularly Polarized Luminescence in a Pyrene-Functionalized Topologically Chiral [2]Catenane.

Mechanically interlocked molecules (MIMs) are promising platform for developing functionalized artificial molecular machines. The construction of chiral MIMs with appealing circularly polarized luminescence (CPL) properties has boosted their potential application in biomedicine and optical industry. However, there is currently little knowledge about the CPL emission mechanism as well as the emission dynamics of these related MIMs. Herein, we demonstrate that time-resolved circularly polarized luminescence (TRCPL) spectroscopy combined with transient absorption (TA) spectroscopy offers a feasible approach to elucidate the origins of CPL emission in pyrene-functionalized topologically chiral [2]catenane as well as in a series of pyrene-functionalized chiral molecules. For the first time, direct evidence differentiating the chiroptical signals originating from either topological (local state emission) or Euclidean chirality (excimer state emission) in these pyrene-functionalized chiral molecules has been discovered. Our work not only establishes a novel and ideal methodology to study CPL mechanism, but also provides a theoretical foundation for the rational design of novel chiral materials in the future.

Inducing and Switching the Handedness of Polyacetylenes with Topologically Chiral [2]Catenane Pendants.

To explore the chirality induction and switching of topological chirality, poly[2]catenanes composed of helical poly(phenylacetylenes) (PPAs) main chain and topologically chiral [2]catenane pendants are described for the first time. These poly[2]catenanes with optically active [2]catenanes on side chains were synthesized by polymerization of enantiomerically pure topologically chiral [2]catenanes with ethynyl polymerization site and/or point chiral moiety. The chirality information of [2]catenane pendants was successfully transferred to the main chain of polyene backbones, leading to preferred-handed helical conformations, while the introduction of point chiral units has negligible effect on the overall helices. More interestingly, attributed to unique dynamic feature of the [2]catenane pendants, these polymers revealed dynamic response behaviors to solvents, temperature, and sodium ions, resulting in the fully reversible switching on/off of the chirality induction. This work provides not only new design strategy for novel chiroptical switches with topologically chiral molecules but also novel platforms for the development of smart chiral materials.

[Effects of water level on soil seed bank in the floodplain wetland of Juzhang River, China]. / 水位变化对沮漳河河漫滩湿地土壤种子库的影响.

Aiming to understand the responses of soil seed bank to different water levels, we investigated vegetation and soil seed bank along a water level gradient (frequently flooded area, unflooded area) on the floodplain wetland of Juzhang River. We used the structural equation model to explore the direct and indirect effects of water level on soil seed bank, and used non-metric multidimensional scaling (NMDS) to assess the role of soil seed bank for vegetation regeneration. The results showed that the density of transient and persistent seed banks at unflooded area was 36.9% and 7.8% higher than that of frequently flooded area, respectively. Shannon index and Pielou index of seed bank and vegetation were significantly affected by water level and sampling location. Water level significantly affected the similarity between seed bank and aboveground vegetation, and the similarity of persistent seed bank with aboveground vegetation was significantly higher than that with transient seed bank. Structural equation model showed that water level had a direct effect on seed bank density, and indirect effects on density and richness of seed bank via affecting soil pH and NH4+-N content. NMDS results showed that there was no significant difference in the composition of the persistent seed bank and vegetation community in autumn under different water levels, but water level significantly changed the community composition of transient seed bank. Transient seed bank was affected by the vegetation and soil property, while persistent seed bank was determined by aboveground vegetation and water level. Although soil seed bank had low regeneration potential for the vegetation communities in floodplain wetlands, soil seed bank could not be neglected during the restoration of propagule diversity after disturbance in wetlands. Persistent seed bank would be an importance source of diversity of propagules for floodplain wetlands restoration following disturbance.

Structural identification of single boron-doped graphdiynes by computational XPS and NEXAFS spectroscopy.

Boron-doped graphdiyne (B-GDY) material exhibits an excellent performance in electrocatalysis, ion transport, and energy storage. However, accurately identifying the structures of B-GDY in experiments remains a challenge, hindering further selection of suitable structures with the most ideal performance for various practical applications. In the present work, we employed density functional theory (DFT) to simulate the X-ray photoelectron spectra (XPS) and near-edge X-ray absorption fine-structure (NEXAFS) spectra of pristine graphdiyne (GDY) and six representative single boron-doped graphdiynes at the B and C K-edges to establish the structure-spectroscopy relationship. A notable disparity in the C 1s ionization potentials (IPs) between substituted and adsorbed structures is observed upon doping with a boron atom. By analyzing the C and B 1s NEXAFS spectra on energy positions, spectral widths, spectral intensities, and different spectral profiles, we found that the six single boron-doped graphdiyne configurations can be sensitively identified. Moreover, this study provides a reliable theoretical reference for distinguishing different single boron-doped graphdiyne structures, enabling accurate selection of B-GDY structures for diverse practical applications.

A Redox-active Phenothiazine-based Pd2L4-type Coordination Cage and Its Isolable Crystalline Polyradical Cations.

Polyradical cages are of great interest because they show very fascinating physical and chemical properties, but many challenges remain, especially for their synthesis and characterization. Herein, we present the synthesis of a polyradical cation cage 14•+ through post-synthetic oxidation of a redox-active phenothiazine-based Pd2L4-type coordination cage 1. It's worth noting that 1 exhibits excellent reversible electrochemical and chemical redox activity due to the introduction of a bulky 3,5-di-tert-butyl-4-methoxyphenyl substituent. The generation of 14•+ through reversible electrochemical oxidation is investigated by in situ UV-vis-NIR and EPR spectroelectrochemistry. Meanwhile, chemical oxidation of 1 can also produce 14•+ which can be reversibly reduced back to the original cage 1, and the process is monitored by EPR and NMR spectroscopies. Eventually, we succeed in the isolation and single crystal X-ray diffraction analysis of 14•+, whose electronic structure and conformation are distinct to original 1. The magnetic susceptibility measurements indicate the predominantly antiferromagnetic interactions between the four phenothiazine radical cations in 14•+. We believe that our study including the facile synthesis methodology and in situ spectroelectrochemistry will shed some light on the synthesis and characterization of novel polyradical systems, opening more perspectives for developing functional supramolecular cages.

Negative expression of CD117 predicted inferior OS and PFS in acute promyelocytic leukemia.

INTRODUCTION: In recent years, the correlation between CD117 antigen and the prognosis of hematological malignancies has been demonstrated. However, there is limited literature on the clinical significance of CD117 antigen in acute promyelocytic leukemia (APL). The aim of this study was to retrospectively analyze the clinical features and prognostic significance of CD117 in APL. METHODS: In this study, we retrospectively investigated the clinicopathological characteristics, outcome, and prognostic impact of negative CD117 expression (CD117-) in 169 APL patients treated with all-trans retinoic acid (ATRA) and arsenic trioxide (ATO) containing regimen. RESULTS: The median follow-up period was 63.0 months. CD117- was detected in 13 APL patients (7.7%). No significant differences were found in baseline characteristics between CD117+ and CD117- subgroups. However, compared to CD117+ APL, the incidence of early death (ED) was significantly higher in CD117- APL (p = 0.023). By multivariate analysis, CD117- was an independent adverse prognostic factor for overall survival (OS) and progression-free survival (PFS) (p = 0.022 and p = 0.014, respectively). CONCLUSIONS: To sum up, CD117- is associated with greater risk of ED and has the statistical power to predict inferior OS and PFS, this marker may be considered to build prognostic scores for risk-adapted therapeutic strategies in APL management.

High-Performance One-Component Epoxy Adhesive Based on the Synergistic Effect of Lignin-Derived Triaryl-Imidazole and Phytic Acid.

Latent curing agents are essential in the formulation of one-component epoxy resins, yet they are seldom derived from fully biobased chemicals. In the present work, a fully biobased latent curing agent for epoxy resins (BIMPA) was produced by synthesizing an ionic complex of lignin-derived triaryl-imidazole (BIM) and phytic acid (PA). Benefiting from the synergistic effect of BIM and PA, the one-component epoxy resin, composed of BIMPA and commercially available E51, exhibits a storage stability of over 90 days. Upon heating, the ionic complex undergoes decomposition, liberating the active imidazole to cure the precursor. The resulting epoxy resins exhibited a flexural modulus of 3.09 GPa, a flexural strength of 107.47 MPa, a notched izod impact strength of 2.47 kJ/m3, and a shear strength of 41.02 MPa. The outcome can provide an effective supplement for the development of biobased epoxy resins.

Enhancement of silicon vacancy fluorescence intensity in silicon carbide using a dielectric cavity.

Over the past decades, spin qubits in silicon carbide (SiC) have emerged as promising platforms for a wide range of quantum technologies. The fluorescence intensity holds significant importance in the performance of quantum photonics, quantum information process, and sensitivity of quantum sensing. In this work, a dual-layer Au/SiO2 dielectric cavity is employed to enhance the fluorescence intensity of a shallow silicon vacancy ensemble in 4H-SiC. Experimental results demonstrate an effective fourfold augmentation in fluorescence counts at saturating laser power, corroborating our theoretical predictions. Based on this, we further investigate the influence of dielectric cavities on the contrast and linewidth of optically detected magnetic resonance (ODMR). There is a 1.6-fold improvement in magnetic field sensitivity. In spin echo experiments, coherence times remain constant regardless of the thickness of dielectric cavities. These experiments pave the way for broader applications of dielectric cavities in SiC-based quantum technologies.

Luminol-Eu3+-Gd3+-functionalized mesoporous silica for ultrasensitive detection of tetracycline antibiotics and smartphone-assisted sensing analysis.

An organic-inorganic hybrid nanoprobe, namely LML-D-SBA@Eu3+-Gd3+, was constructed, with SBA-15 acting as the carrier material, and luminol and Eu3+ acting as fluorescence channels to achieve ratiometric signals that eliminate external interference (accurate detection). Gd3+ was used as a sensitizer to amplify the red emission of Eu3+ (ultrasensitive detection). In TCs detection, the luminol emission at 428 nm was quenched due to the photoinduced electron transfer mechanism, and the Eu3+ emission at 617 nm was sensitized due to the synergistic energy transfer from TCs and Gd3+ to Eu3+. The fluorescence intensity at 617 and 428 nm showed ratiometric changes as indicated by notable color changes from blue to red. The detection limits for TC and OTC were 0.21 and 0.08 ng/mL, respectively. To realize a facile, rapid, and cost-effective detection, we constructed a portable intelligent sensing platform based on smartphones, and it demonstrated great potential for on-site detection of TCs.

Effectiveness and safety of Governor vessel acupuncture therapy for post-stroke cognitive impairment: A meta-analysis of randomized controlled trials.

OBJECTIVE: The purpose of this study was to evaluate the effectiveness of Governor vessel acupuncture (GV Ac) in treating post-stroke cognitive impairment (PSCI). METHODS: There was a total of seven databases examined. Four English databases (Cochrane Library, PubMed, Embase, and Medline) and three Chinese databases (Chinese National Knowledge Infrastructure (CNKI), Chinese Science and Technology Periodical Databases (VIP), and Wan Fang Database) contain all randomized controlled trials (RCTs) comparing Governor vessel acupuncture to other treatments or none acupuncture for PSCI. The exact dates for the search period are from January 1, 2000, to January 1, 2023.Two researchers independently reviewed the literature, gathered RCT data, and performed statistical analysis. All data were analyzed using Review Manager software (Rev Man) 5.3. RESULTS: This meta-analysis includes a total of 39 trials with 2044 patients. There were 1022 participants in each of the test and control groups. Following 12-120 days of acupuncture treatment, a meta-analysis revealed that the treatment groups (GV Ac combined with conventional treatment groups) significantly increased their scores on the Curative ratio (OR = 3.00, 95 %CI = 2.37-3.79, P = 0.98, I² = 0 %), Montreal Cognitive Assessment (MoCA)(MD = 1.82, 95 %CI = 1.60-2.03, P = 0.11, I² = 25 %), Mini-Mental State Examination (MMSE)(MD = 2.18, 95 %CI = 1.64-2.72, P<0.005, I² = 92 %), and Activity of Daily Living (ADL)(MD = 5.99, 95 %CI = 5.33-6.64, P = 0.19, I² = 26 %). CONCLUSION: The results suggested that acupuncture on points of the Governor vessel enhanced cognitive function in stroke survivors.

A highly specific and ultrasensitive approach to detect Prymnesium parvum based on RPA-CRISPR-LbaCas12a-LFD system.

BACKGROUND: Harmful algal blooms (HABs), caused by the rapid proliferation or aggregation of microorganisms, are catastrophic for the environment. The Prymnesium parvum is a haptophyte algal species that is found worldwide and is responsible for extensive blooms and death of larval amphibians and bivalves, causing serious negative impacts on the ecological environment. For the prevention and management of environmental pollution, it is crucial to explore and develop early detection strategies for HABs on-site using simple methods. The major challenge related to early detection is the accurate and sensitive detection of algae present in low abundance. RESULTS: Herein, recombinase polymerase amplification (RPA) was combined with clustered regularly interspaced short palindromic repeats and Cas12a protein (CRISPR-LbaCas12a) systems, and the lateral flow dipstick (LFD) was used for the first time for early detection of P. parvum. The internal transcribed spacer (ITS) of P. parvum was selected as the target sequence, and the concentration of single-strand DNA reporters, buffer liquid system, reaction time, and amount of gold particles were optimized. The RPA-CRISPR-LbaCas12a-LFD approach demonstrated highly specificity during experimental testing, with no cross-reaction against different microalgae used as controls. In addition, the lowest detection limit was 10,000 times better than the lowest detection limit of the standalone RPA approach. The feasibility and robustness of this approach were further verified by using the different environmental samples. It also observed that P. parvum are widely distributed in Chinese Sea, but the cell density of P. parvum is relatively low (<0.1 cells/mL). SIGNIFICANCE: The developed approach has an excellent specificity and offers 10,000 times better sensitivity than the standalone RPA approach. These advantages make this approach suitable for early warning detection and prevention of HAB events in environmental water. Also, the outcomes of this study could promote a shift from traditional laboratory-based detection to on-site monitoring, facilitating early warning against HABs.

[Research progress of chemerin in polycystic ovary syndrome].

As a multifunctional adipokine, chemerin plays a crucial role in various pathophysiological processes through endocrine and paracrine manner. It can bind to three known receptors (ChemR23, GPR1 and CCRL2) and participate in energy metabolism, glucose and lipid metabolism, and inflammation, especially in metabolic diseases. Polycystic ovary syndrome (PCOS) is one of the most common endocrine diseases, which seriously affects the normal life of women of childbearing age. Patients with PCOS have significantly increased serum levels of chemerin and high expression of chemerin in their ovaries. More and more studies have shown that chemerin is involved in the occurrence and development of PCOS by affecting obesity, insulin resistance, hyperandrogenism, oxidative stress and inflammatory response. This article mainly reviews the production, subtypes, function and receptors of chemerin protein, summarizes and discusses the research status of chemerin protein in PCOS from the perspectives of metabolism, reproduction and inflammation, and provides theoretical basis and reference for the clinical diagnosis and treatment of PCOS.

Risk Factors of New Symptomatic Fractures After Vertebroplasty: A Retrospective Cohort Study of 268 Patients with Painful Osteoporotic Vertebral Compression Fracture.

OBJECTIVE: To evaluate the risk factors of new osteoporotic vertebral compression fractures (OVCFs) after percutaneous vertebroplasty (PVP). METHODS: From January 2016 to November 2019, patients suffering from OVCFs were retrospectively reviewed. The independent influence factors for new OVCFs after PVP were assessed, from following variables: age, sex, body mass index, bone mineral density (BMD), history of alcoholism, smoking, hypertension, diabetes, glucocorticoid use, and prior vertebral fractures, the number of initial fractures, mean cement volume, method of puncture, D-type of cement leakage, and regular antiosteoporosis treatment. RESULTS: A total of 268 patients with 347 levels met the inclusion criteria and were finally included in this study. Forty-nine levels of new OVCFs among 33 patients (12.31%) were observed during the follow-up period. It indicated that female (adjusted odds ratio [OR]: 6.812, 95% confidence interval {CI}: [1.096, 42.337], P = 0.040), lower BMD (adjusted OR: 0.477, 95% CI: [0.300, 0.759], P = 0.002), prior vertebral fractures (adjusted OR: 16.145, 95% CI: [5.319, 49.005], P = 0.000), and regular antiosteoporosis treatment (adjusted OR: 0.258, 95% CI: [0.086, 0.774], P = 0.016) were independent influence factors for new OVCF. The cut-off value of BMD to reach new OVCF was -3.350, with a sensitivity of 0.660 and a specificity of 0.848. CONCLUSION: Female, lower BMD (T-score of lumbar), prior vertebral fractures, and regular antiosteoporosis treatment were independent influencing factors. BMD (T-score of lumbar) lower than -3.350 would increase risk for new OVCF, and none osteoporotic treatment has detrimental effect on new onset fractures following PVP.