Zirconium Carbide Produced by Spark Plasma Sintering and Hot Pressing: Densification Kinetics, Grain Growth, and Thermal Properties.

Spark plasma sintering (SPS) has been employed to consolidate a micron-sized zirconium carbide (ZrC) powder. ZrC pellets with a variety of relative densities are obtained under different processing parameters. The densification kinetics of ZrC powders subjected to conventional hot pressing and SPS are comparatively studied by applying similar heating and loading profiles. Due to the lack of electric current assistance, the conventional hot pressing appears to impose lower strain rate sensitivity and higher activation energy values than those which correspond to the SPS processing. A finite element simulation is used to analyze the temperature evolution within the volume of ZrC specimens subjected to SPS. The control mechanism for grain growth during the final SPS stage is studied via a recently modified model, in which the grain growth rate dependence on porosity is incorporated. The constant pressure specific heat and thermal conductivity of the SPS-processed ZrC are determined to be higher than those reported for the hot-pressed ZrC and the benefits of applying SPS are indicated accordingly.

Spark Plasma Sintering of Commercial Zirconium Carbide Powders: Densification Behavior and Mechanical Properties.

Commercial zirconium carbide (ZrC) powder is consolidated by Spark Plasma Sintering (SPS). Processing temperatures range from 1650 to 2100 °C. Specimens with various density levels are obtained when performing single-die SPS at different temperatures. Besides the single-die tooling setup, a double-die tooling setup is employed to largely increase the actual applied pressure to achieve higher densification in a shorter processing time. In order to describe the densification mechanism of ZrC powder under SPS conditions, a power-law creep constitutive equation is utilized, whose coefficients are determined by the inverse regression of the obtained experimental data. The densification of the selected ZrC powder is shown to be likely associated with grain boundary sliding and dislocation glide controlled creep. Transverse rupture strength and microhardness of sintered specimens are measured to be up to 380 MPa and 24 GPa, respectively. Mechanical properties are correlated with specimens' average grain size and relative density to elucidate the co-factor dependencies.

Localized Overheating Phenomena and Optimization of Spark-Plasma Sintering Tooling Design.

The present paper shows the application of a three-dimensional coupled electrical, thermal, mechanical finite element macro-scale modeling framework of Spark Plasma Sintering (SPS) to an actual problem of SPS tooling overheating, encountered during SPS experimentation. The overheating phenomenon is analyzed by varying the geometry of the tooling that exhibits the problem, namely by modeling various tooling configurations involving sequences of disk-shape spacers with step-wise increasing radii. The analysis is conducted by means of finite element simulations, intended to obtain temperature spatial distributions in the graphite press-forms, including punches, dies, and spacers; to identify the temperature peaks and their respective timing, and to propose a more suitable SPS tooling configuration with the avoidance of the overheating as a final aim. Electric currents-based Joule heating, heat transfer, mechanical conditions, and densification are imbedded in the model, utilizing the finite-element software COMSOL™, which possesses a distinguishing ability of coupling multiple physics. Thereby the implementation of a finite element method applicable to a broad range of SPS procedures is carried out, together with the more specific optimization of the SPS tooling design when dealing with excessive heating phenomena.

Estrogenic compounds are not always cardioprotective and can be lethal in males with genetic heart disease.

Hypertrophic cardiomyopathy (HCM) is more severe in male than female mice eating a soy-based diet. We sought to determine whether the detrimental effects are mediated by the phytoestrogens present in soy, the mechanism by which phytoestrogens act, and to test whether estrogen modulates the sexually dimorphic phenotype. A soy-free diet (casein based) supplemented with the predominant phytoestrogens in soy, genistein and daidzein, recapitulated the fibrotic, proapoptotic and negative hemodynamic effects of soy in male hearts. As with the soy diet, the hearts of female HCM mice were not negatively affected by the phytoestrogen-containing diet. To determine the role of estrogen in the sex differences mediated by diet in HCM, gonadectomies were performed and estrogen was administered to male and female HCM mice on a casein- or phytoestrogen-supplemented diet. Somewhat surprisingly, estrogen was not protective in male or female mice with HCM and, in fact, was lethal in phytoestrogen-fed male mice with HCM. Because genistein is a potent tyrosine kinase inhibitor and tyrosine kinase inhibition has been associated with cardiotoxicity, we tested its effects in isolated adult cardiac myocytes. Genistein inhibited different tyrosine kinases depending on sex and, in combination with estrogen, resulted in apoptosis only in adult male cardiac myocytes. Finally, we show that phytoestrogens led to distinct programs of gene expression in hearts from males vs. females with HCM, suggesting mechanisms by which males are more sensitive to the detrimental effects of phytoestrogens and females are protected. These results implicate the phytoestrogen genistein in mediating cardiac pathology in males with HCM and, importantly, establish that estrogen is not protective in the setting of HCM.

Estrogens mediate cardiac hypertrophy in a stimulus-dependent manner.

The incidence of cardiac hypertrophy, an established risk factor for heart failure, is generally lower in women compared with men, but this advantage is lost after menopause. Although it is widely believed that estrogens are cardioprotective, there are contradictory reports, including increased cardiac events in postmenopausal women receiving estrogens and enhanced cardiac protection from ischemic injury in female mice without estrogens. We exposed aromatase knockout (ArKO) mice, which produce no estrogens, to both pathologic and physiologic stimuli. This model allows an investigation into the effects of a complete, chronic lack of estrogens in male and female hearts. At baseline, female ArKO mice had normal-sized hearts but decreased cardiac function and paradoxically increased phosphorylation of many progrowth kinases. When challenged with the pathological stimulus, isoproterenol, ArKO females developed 2-fold more hypertrophy than wild-type females. In contrast, exercise-induced physiological hypertrophy was unaffected by the absence of estrogens in either sex, although running performance was blunted in ArKO females. Thus, loss of estrogen signaling in females, but not males, impairs cardiac function and sensitizes the heart to pathological insults through up-regulation of multiple hypertrophic pathways. These findings provide insight into the apparent loss of cardioprotection after menopause and suggest that caution is warranted in the long-term use of aromatase inhibitors in the setting of breast cancer prevention.

From Grignard's reagents to well-defined Mg nanostructures: distinctive electrochemical and solution reduction routes.

Anisotropic Mg nanowires have been successfully prepared by electrocrystallization of Grignard's reagents thought to proceed via a modified faces, steps, and kinks (FSK) mechanism. Mg nanoparticles with roughly hexagonal shapes have also been obtained via chemical reduction of the same Grignard's reagents.

Nanostructure of Er3+ doped silicates.

We demonstrate nanostructural evolution resulting in highly increased photoluminescence in silicates doped with Er3+ ions. High-resolution transmission electron microscopy (HRTEM) imaging, nano-energy dispersed X-ray (NEDX) spectroscopy, X-ray diffraction (XRD) and photoluminescence analysis confirm the local composition and structure changes of the Er3+ ions upon thermal annealing. We studied two types of amorphous nanopowder: the first is of the composition SiO2/18Al2O3/2Er2O3 (SAE), synthesized by combustion flame-chemical vapor condensation, and the second is with a composition of SiO2/8Y2O3/2Er2O3 (SYE), synthesized by sol-gel synthesis (composition in mol%). Electron diffraction and HRTEM imaging clearly show the formation of nanocrystallites with an average diameter of approximately 8 nm in SAE samples annealed at 1000 degrees C and SYE samples annealed at 1200 degrees C. The volume fraction of the nanocrystalline phase increased with each heat treatment, eventually leading to complete devitrification at 1400 degrees C. Further XRD and NEDX analysis indicates that the nanocrystalline phase has the pyrochlore structure with the formula Er(x)Al(2-x)Si2O7 or Er(x)Y(2-x)Si2O7 and a surrounding silica matrix.