Pt/MnO Interface Induced Defects for High Reverse Water Gas Shift Activity.

The implementation of supported metal catalysts heavily relies on the synergistic interactions between metal nanoparticles and the material they are dispersed on. It is clear that interfacial perimeter sites have outstanding skills for turning catalytic reactions over, however, high activity and selectivity of the designed interface-induced metal distortion can also obtain catalysts for the most crucial industrial processes as evidenced in this paper. Herein, the beneficial synergy established between designed Pt nanoparticles and MnO in the course of the reverse water gas shift (RWGS) reaction resulted in a Pt/MnO catalyst having ≈10 times higher activity compared to the reference Pt/SBA-15 catalyst with >99 % CO selectivity. Under activation, a crystal assembly through the metallic Pt (110) and MnO evolved, where the plane distance differences caused a mismatched-row structure in softer Pt nanoparticles, which was identified by microscopic and surface-sensitive spectroscopic characterizations combined with density functional theory simulations. The generated edge dislocations caused the Pt lattice expansion which led to the weakening of the Pt-CO bond. Even though MnO also exhibited an adverse effect on Pt by lowering the number of exposed metal sites, rapid desorption of the linearly adsorbed CO species governed the performance of the Pt/MnO in the RWGS.

Development of Magnetizable, Nickel-Ferrite-Decorated Carbon Nanocomposites as Hydrogenation Catalyst for Aniline Synthesis.

Catalysts with magnetic properties can be easily recovered from the reaction medium without loss by using a magnetic field, which highly improves their applicability. To design such systems, we have successfully combined the magnetic properties of nickel ferrite nanoparticles with the positive properties of carbon-based catalyst supports. Amine-functionalized NiFe2O4 nanoparticles were deposited on the surfaces of nitrogen-doped bamboo-like carbon nanotubes (N-BCNT) and carbon nanolayers (CNL) by using a coprecipitation process. The magnetizable catalyst supports were decorated by Pd nanoparticles, and their catalytic activity was tested through the hydrogenation of nitrobenzene (NB). By using the prepared catalysts, high nitrobenzene conversion (100% for 120 min at 333 K) and a high aniline yield (99%) were achieved. The Pd/NiFe2O4-CNL catalyst was remarkable in terms of stability during the reuse tests due to the strong interaction formed between the catalytically active metal and its support (the activity was retained during four cycles of 120 min at 333 K). Furthermore, despite the long-lasting mechanical stress, no significant palladium loss (only 0.08 wt%) was detected.

Electric and Photocatalytic Properties of Graphene Oxide Depending on the Degree of Its Reduction.

When graphene oxide is reduced, the functional groups are released and the structure becomes more ordered. The degree of reduction might be tunable with the process parameters. In our work, graphene oxide is prepared and the effect of thermal and chemical reduction is investigated. The samples are characterized with TG/DTA-MS, SEM-EDX, TEM, XPS, ATR-FTIR, Raman spectroscopy and XRD. Their electrical resistance, cyclic voltammetry and photocatalytic activity data are investigated. The conductivity can be varied by several orders of magnitude, offering a tool to match its electrical properties to certain applications. Low temperature reduction in air offers a material with the highest capacitance, which might be used in supercapacitors. The bare graphene oxide has considerably larger photocatalytic activity than P25 TiO2. Reduction decreases the activity, meaning that reduced graphene oxide can be used as an electron sink in composite photocatalysts, but does not contribute to the photocatalytic activity by itself.

Time-resolved momentum microscopy with a 1 MHz high-harmonic extreme ultraviolet beamline.

Recent progress in laser-based high-repetition rate extreme ultraviolet (EUV) light sources and multidimensional photoelectron spectroscopy enables the build-up of a new generation of time-resolved photoemission experiments. Here, we present a setup for time-resolved momentum microscopy driven by a 1 MHz fs EUV table-top light source optimized for the generation of 26.5 eV photons. The setup provides simultaneous access to the temporal evolution of the photoelectron's kinetic energy and in-plane momentum. We discuss opportunities and limitations of our new experiment based on a series of static and time-resolved measurements on graphene.

Designed Pt Promoted 3D Mesoporous Co3O4 Catalyst in CO2 Hydrogenation.

Controlled size Pt nanoparticles were anchored onto the surface of 3D mesoporous cobalt-oxide support and was tested in CO2 hydrogenation reactions compared to commercial cobalt-oxide supported Pt nanoparticles prepared by the wet impregnation method as well as SBA-15 silica supported nanoparticles. Designed Pt/mesoporous cobalt-oxide catalysts showed the highest activity as well as the highest methane selectivity. Such catalyst was active at 573 K, while other catalysts showed activity >673 K.

Outstanding Activity and Selectivity of Controlled Size Pt Nanoparticles Over WO3 Nanowires in Ethanol Decomposition Reaction.

Pt nanoparticles with controlled size of 1.5 and 6.5 nm were anchored onto the surface of WO3 nanowires (WO3NW) as well as on MCF-17 silica. In the case of WO3NW and MCF-17 supported nanoparticles, 1.5 nm Pt nanoparticles were more active in ethanol decomposition reaction at 533 K. 6.5 nm Pt/WO3NW catalyst showed ~6 times higher activity compared to MCF-17 supported 6.5 nm Pt nanoparticles. While MCF-17 supported catalysts produced hydrogen, methane, carbon-monoxide and acetaldehyde, the tungsten-oxide supported Pt nanoparticles produced a huge amount of acetone as well as ethene with a high acetaldehyde selectivity besides H2, CH4 and CO. The hydrogen formation was significantly higher when the Pt size was 1.5 nm. The metallic nanoparticles, the acid sites and the oxidized centers of support play important role in the formation of decomposition products of ethanol.

Development and Application of Carbon-Layer-Stabilized, Nitrogen-Doped, Bamboo-Like Carbon Nanotube Catalysts in CO2 Hydrogenation.

Nitrogen-doped, bamboo-like carbon nanotubes (BCNTs) were synthesized from butylamine by catalytic chemical vapor deposition (CCVD method). The nanotubes were oxidized by H2SO4/HNO3 treatment and used to prepare calcium alginate gelled BCNT spheres. These beads were first carbonized and then Pd, Rh and Ni nanoparticles were anchored on the surface of the spheres. These systems were then applied as catalysts in CO2 hydrogenation. The BCNT support was examined by Raman spectroscopy, dynamic light scattering (DLS) and X-ray photoelectron spectroscopy (XPS). The prepared catalysts were characterized by HRTEM and SEM. The oxidation pretreatment of BCNTs was successful, with the electrokinetic potential of the water-based dispersion of BCNTs measuring -59.9 mV, meaning the nanotube dispersion is stable. Pyridinic and graphitic types of incorporated nitrogen centers were identified in the structure of the nanotubes, according to the XPS measurements. The Pd-containing BCNT sphere catalyst was the most efficient in the catalytic studies. The highest conversion was reached on the Pd catalyst at 723 K, as well as at 873 K. The difference in the formation rate of CO was much less at 873 K between the Pd and Rh compared to the 723 K values. Accordingly, the application of Pd-containing BCNT/carbon-supported catalyst favored the generation of CO. However, the Ni-BCNT/carbon catalyst leads to the formation of CH4 as the major product.