The load capacity of maxillary central incisor with simulated flared root canal restored with different fiber-reinforced composite post and cementation protocols.

Background: This study aimed to evaluate the load capacity of maxillary central incisors with simulated flared root canal restored with different fiber-reinforced composite (FRC) post cemented with either self-adhesive or self-etch resin cement and its mode of fracture. Methods: Sixty-five extracted maxillary incisors were decoronated, its canal was artificially flared and randomly categorized into group tFRC (tapered FRC post) (n = 22), mFRC (multi-FRC post) (n = 21), and DIS-FRC (direct individually shaped-FRC (DIS-FRC) post) (n = 22), which were further subdivided based on cementation resin. The posts were cemented and a standardized resin core was constructed. After thermocycling, the samples were loaded statically and the maximum load was recorded. Results: The load capacity of the maxillary central incisor was influenced by the different FRC post system and not the resin cement (p = 0.289), and no significant interaction was found between them. Group mFRC (522.9N) yielded a significantly higher load capacity compared to DIS-FRC (421.1N). Overall, a 55% favorable fracture pattern was observed, and this was not statistically significant. Conclusion: Within the limitation of the study, it can be concluded that prefabricated FRC posts outperform DIS-FRC posts in terms of the load capacity of a maxillary central incisor with a simulated flared root canal. The cementation methods whether a self-adhesive or self-etch resin cement, was not demonstrated to influence the load capacity of a maxillary central incisor with a flared root canal. There were no significant differences between the favorable and non-favorable fracture when FRC post systems were used to restored a maxillary central incisor with a flared root canal.

Comparative evaluation of Sapindus Mukorossi extract with 17% EDTA on smear layer removal in various parts of the tooth root.

OBJECTIVES: This study aimed to compare the effectiveness of an experimental root canal irrigant and 17% Ethylene-di-amine tetra acetic acid for removal of the smear layer in the coronal, middle and apical portions of the root canal. MATERIALS AND METHODS: Ninety human single rooted maxillary and mandibular teeth were selected for this study. The teeth were randomly divided into two experimental groups and one control group as follows: Group A (Ethanolic extract of Sapindus Mukorossi), Group B (17% EDTA), and Group C (Distilled water). The root canals of all three groups were prepared with stainless steel K-files by means of the standard step-back technique and irrigated with 5.25% sodium hypo chloride. The teeth were decoronated, following the irrigation and divided longitudinally into two-halves and visualized using scanning electron microscope (SEM) for the amount of smear layer present utilizing the three-point score system. The observations were noted both before and after the treatment. Nonparametric tests were applied for the comparison and p-value ⩽ 0.05 was considered as statistically significant. RESULTS: It was evident from that smear layer was completely removed in coronal portion of 27 out of 30 teeth in-group A. For middle and apical areas of group A, 24 and 19 teeth showed complete smear layer removal. In-group B it was found that there were 24, 21, and 3 teeth at coronal, middle and apical, areas respectively where smear layer were completely absent. Intra group comparison showed a significant difference (p = 0.002) in smear layer removal was found for group A at coronal, middle and apical thirds. Similarly, a significant difference (p = 0.001) was also found for group B; however heavy smear layer was found among the three parts of the canal for group C. CONCLUSIONS: Ethanolic extract of Sapindus Mukorossi have higher effectiveness in removing the smear layer from the root canal in comparison to 17% EDTA.

The Analysis of Facio-Dental Proportions to Determine the Width of Maxillary Anterior Teeth: A Clinical Study.

The present study aimed to analyze mid horizontal facial third proportions, those being the interpupillary, inner intercanthal, and bizygomatic distance modified with golden proportion, The Preston proportion, golden percentage and 70% recurring esthetic dental proportion were used for determining maxillary anterior teeth width. A total of 230 participants took part in this study. The front dental and facial photographs along dental stone cast which were converted to three-dimensional (3D) models were used for evaluation. The mid horizontal facial third proportions showed no significant relationship with maxillary anterior teeth width without modification with dental proportions. Whereas, with modification, no statistically significant difference was found between inner-intercanthal distance by golden percentage and width of central incisors. The bizygomatic distance was greater than intercanine distance. While the interpupillary distance by golden proportion was found to be consistent with intercanine distance in female participants. The modified anterior teeth width was significantly different from measured values, when determined by using the three mid facial proportions with Preston and 70% recurring esthetic dental (RED) proportion. Furthermore, the measured width of maxillary anterior teeth showed no difference when plaster dental casts widths were compared with 3D models. The interpupillary, inner-intercanthal, and bizygomatic distance should not be directly used to determine maxillary anterior teeth width. While maxillary anterior teeth width can be determined by modifying the inner inter-canthal distance with golden percentage and interpupillary distance with golden proportion. Moreover, the midfacial third proportions modified with Preston and 70% recurrent esthetic dental proportion were found to be unreliable for the determination of maxillary anterior teeth widths.

Modeling the Relationship Between Tooth Color and Skin Color in Equations to Predict Tooth Color.

Background Color selection for discolored teeth or for edentulous patients is a subjective process in dentistry. To the best of the authors' knowledge, there is no objective method for tooth color selection for edentulous patients. Several studies have investigated the relationship between tooth color and skin color and the ability to use skin color as a guide to select tooth color in dental rehabilitation cases. The objective of this study was to find and model the relationship between tooth color and skin color in equations to be able to predict tooth color by assessing skin color. Methodology This study was done on 150 participants with equal gender distribution. Digital photography with soft boxes and strobe lights were used to measure tooth and skin color. Digital photography was performed in a dark room with controlled and measured lighting sources and strength. A calibration board was used to create two calibration profiles in software. All photos were calibrated in Adobe Lightroom software. Then, color measurement was done using Adobe Photoshop software in the Commission International de I'Eclarirage (CIELab) system. Results There were positive significant relationships in color spaces L* and a* between tooth color and skin color, and an inverted significant relationship in color space b* between tooth and skin. Three equations with excellent reliability were formulated in this study to predict tooth color by assessing skin color. Conclusions The relationship between tooth color and skin color was modeled in three equations. For edentulous patients, this research might be useful in detecting the proper tooth color and transferring the CIELab color data to dental technicians for further processing. Computerized shade matching and prediction dental software may be designed using these equations.

Analysis of recurrent esthetic dental proportion of natural maxillary anterior teeth: A systematic review.

STATEMENT OF PROBLEM: The recurrent esthetic dental (RED) proportion has been a benchmark for the rehabilitation of the maxillary anterior teeth of North American patients. While it has been evaluated in other populations, the global application of RED proportions in the rehabilitation of maxillary anterior teeth is unclear. PURPOSE: The purpose of this systematic review was to examine the existing evidence on dental proportion to evaluate the existence of RED proportions in the esthetic smile in different geographic regions. MATERIAL AND METHODS: A systematic search was conducted by reviewing different databases. The focused question was "Does RED proportion exist in esthetically pleasing smiles in different populations around the world?" The search included articles with a combination of MeSH keywords based on dental proportion from January 2000 to July 2020. The titles and abstracts were identified by using a search protocol. Full text of the articles was independently evaluated. The systematic review was modified to summarize the relevant data. The general characteristics, outcomes, and quality of studies were reviewed and analyzed systematically. RESULTS: Seventeen studies were selected from the reviewed articles. Three studies were conducted in Europe, 10 in South Asia, and 4 in Western Asia. Eleven studies found that the mean perceived ratio of anterior teeth was not constant when progressing distally. Five studies reported that the ratio was constant in a small percentage of their populations, and 1 suggested that the ratio was constant if it remains between 60% and 80%. The central-to-LI and Ca-to-LI proportion values were not constant. Overall, the Ca-to-LI proportion values were higher than the central-to-LI proportions. CONCLUSIONS: RED proportions were not found in the successive widths of maxillary anterior teeth among the reviewed data from different geographic regions. RED proportions are not the only standard for restoring esthetic smiles worldwide, and anterior tooth proportions differ among populations based on their race and ethnicity.

An Analysis of Maxillary Anterior Teeth Crown Width-Height Ratios: A Photographic, Three-Dimensional, and Standardized Plaster Model's Study.

OBJECTIVE: To analyze the width and height ratios of maxillary anterior teeth at different crown levels through photographs, 3D, and plaster dental model techniques in a subset of the Pakistani population. Material and Methods. This clinical study consisted of 230 participants. The maxillary impression, standardized photographs, and models were constructed for crown width and height analysis. The SPSS version 25 was used for statistical analysis. Descriptive statistics were carried out for mean, standard deviation, and percentage calculation of teeth width and height, gender, and age of participants. Paired t-test analysis was carried out to compare the dependent variables (teeth size, width, and height ratios) with independent variables (techniques applied, side disparity). A p value of ≤ 0.05 was considered statistically significant. RESULTS: The mean width and height of maxillary anterior teeth obtained through photographs, 3D, and plater models were statistically different. The 3D dental model analysis showed reliable and accurate results. The mean width and height ratio of teeth were different on both sides of the arch. There was a significant difference (p = 0.001) in crown width-height ratios at different crown levels. CONCLUSION: The width and height ratios in the studied population were different at various crown levels. The dimensions of teeth varied from the incisal to the cervical part of the crown. Hence, rather than relying on a single, fixed ratio of 78% to 80% suggested by researchers for anterior teeth, the clinician should adopt different crown width-height ratios to restore teeth with the optimum esthetic outcome.

Effectiveness of Visual-Tactile Examination and DIAGNOdent Pen in Detecting Early Enamel Caries and Its Remineralisation: An In Vitro Study.

BACKGROUND: The caries preventive effect of Colgate Duraphat® and GC Tooth Mousse Plus® has been widely studied, but the remineralisation potential of initial occlusal caries using these two remineralisation materials remains unclear. AIM: This study is aimed at evaluating and comparing the remineralisation of early enamel caries on the occlusal surface of permanent posterior teeth using ICDAS II caries scoring system and DIAGNOdent Pen (DDPen) after remineralisation with Colgate Duraphat® and GC Tooth Mousse Plus®. MATERIALS AND METHODS: Extracted posterior teeth (N = 120) with incipient occlusal caries were included in this study. The occlusal surface of each tooth was scored using DDPen and ICDAS II scoring before remineralisation. Then, remineralisation of the teeth of the experimental group was carried out using either CPP-ACP-F or fluoride varnish. After the remineralisation procedures, the occlusal surface of each tooth was again scored using DDPen and ICDAS II scoring. The teeth were then fixed in dental stone blocks and sectioned longitudinally for histological examination using a stereomicroscope. Statistical analysis was performed to calculate the sensitivity and specificity of DDPen and ICDAS II to detect remineralisation and compare with the gold standard histological examination. RESULTS: According to ICDAS-II scores, a significant difference was noted in GC Tooth Mousse Plus® and Duraphat® study samples, whereas the difference between the pre-and post-remineralisation of the control group was not significant. According to the DDPen score criteria, a statistically significant difference was noted among all study groups; however, a greater significance level was noted in the GC Tooth Mousse Plus® and Duraphat® study samples compared with the control group. The Spearman's rank correlation of ICDAS-II and DDPen with Downer's histological score (gold standard) revealed a higher association of DDPen score (.738) as compared to ICDAS-II scores (.430). CONCLUSION: The study concluded that both ICDAS II and DDPen could detect remineralisation of early enamel occlusal caries. DDPen was more sensitive than ICDAS-II to detect remineralisation compared with the Downers histological scores.

Evaluation of golden percentage in natural maxillary anterior teeth width: A systematic review.

STATEMENT OF PROBLEM: The color and form of teeth are 2 of the 3 main determinants of success in an esthetic restoration; the third is dental proportion. A recent systematic review of the literature devoted to the evaluation of dental proportion is lacking. PURPOSE: The purpose of this systematic review was to investigate the quality and outcome of studies into maxillary anterior tooth proportion and to determine whether dental proportion ratios based on different geographic regions are appropriate. MATERIAL AND METHODS: An electronic search was conducted using PubMed, MEDLINE, Google Scholar, Embase, Scopus, Cochrane Library, Web of Science, and Science Direct databases. English-language articles reporting with the specific combination of medical subject heading (MeSH) key words were analyzed by 2 investigators. The titles, full text, and abstracts were scanned by investigators independently to identify articles that fulfilled the inclusion criteria. The general characteristics, outcomes, and quality of each study were reviewed and analyzed systematically. RESULTS: The search plan resulted in a total of 73 articles until September 2020; of which, 16 articles fulfilling the inclusion criteria were selected. The geographic distribution of the selected article revealed 12 articles from Asia, 2 from Continental Europe, and 2 from the United Kingdom. Golden percentage values of 25%, 15%, and 10% for central, lateral incisor, and canine teeth were not found. The mean predicted dental percentage was either larger or smaller than the successive widths of maxillary natural anterior teeth. CONCLUSIONS: The golden percentage could not be used to formulate a smile design. Rather, the dental ratios should be set on a racial and ethnic basis for a population.

The Teledentistry, Impact, Current Trends, and Application in Dentistry: A Global Study.

OBJECTIVE: The present study was aimed at assessing the impact of teledentistry, its application, and trends in uplifting dental practice and clinical care around the world. Material and Methods. The present observational study comprised of an electronic survey distributed among dental professionals around the globe. The validated survey form consisted of a total 26 questions with 5-point Likert scale response. The questionnaire used was divided into four domains: usefulness of teledentistry for patients, its usefulness in dental practice, its capacity to improve the existing practice, and the concerns attached to its use. The statistical analysis was performed using SPSS-25. ANOVA test was used to assess the effect of independent variables on dependent variables. A p value of ≤0.05 was taken as statistically significant. RESULTS: A total of 506 dental professionals participated in the study with the response rate of 89.39%. More than half of the participants (50-75%) endorsed that teledentistry is a useful tool for improving clinical practice as well as patient care. Two-thirds of the participants (69.96%) considered that teledentistry would reduce cost for the dental practices. On the other hand, about 50-70% of dental professionals expressed their concerns regarding the security of the data and consent of patients. The most preferred communication tool for teledentistry was reported to be videoconference followed by phone. The majority of participants recommended the use of teledentistry in the specialty of oral medicine, operative dentistry, and periodontics. There was a significant difference between the age, experience of dentists, and their qualifications with domains of teledentistry. CONCLUSIONS: The overall impact of dental professionals towards teledentistry was positive with adequate willingness to incorporate this modality in their clinical practice. However, the perceived concerns pertaining to teledentistry are significant impediments towards its integration within the oral health system. An in-depth study of its business model and cost-benefit needs of time, especially in the context of developing countries, in order to avail the optimum benefits of teledentistry.

Artificial Intelligence Techniques: Analysis, Application, and Outcome in Dentistry-A Systematic Review.

OBJECTIVE: The objective of this systematic review was to investigate the quality and outcome of studies into artificial intelligence techniques, analysis, and effect in dentistry. MATERIALS AND METHODS: Using the MeSH keywords: artificial intelligence (AI), dentistry, AI in dentistry, neural networks and dentistry, machine learning, AI dental imaging, and AI treatment recommendations and dentistry. Two investigators performed an electronic search in 5 databases: PubMed/MEDLINE (National Library of Medicine), Scopus (Elsevier), ScienceDirect databases (Elsevier), Web of Science (Clarivate Analytics), and the Cochrane Collaboration (Wiley). The English language articles reporting on AI in different dental specialties were screened for eligibility. Thirty-two full-text articles were selected and systematically analyzed according to a predefined inclusion criterion. These articles were analyzed as per a specific research question, and the relevant data based on article general characteristics, study and control groups, assessment methods, outcomes, and quality assessment were extracted. RESULTS: The initial search identified 175 articles related to AI in dentistry based on the title and abstracts. The full text of 38 articles was assessed for eligibility to exclude studies not fulfilling the inclusion criteria. Six articles not related to AI in dentistry were excluded. Thirty-two articles were included in the systematic review. It was revealed that AI provides accurate patient management, dental diagnosis, prediction, and decision making. Artificial intelligence appeared as a reliable modality to enhance future implications in the various fields of dentistry, i.e., diagnostic dentistry, patient management, head and neck cancer, restorative dentistry, prosthetic dental sciences, orthodontics, radiology, and periodontics. CONCLUSION: The included studies describe that AI is a reliable tool to make dental care smooth, better, time-saving, and economical for practitioners. AI benefits them in fulfilling patient demand and expectations. The dentists can use AI to ensure quality treatment, better oral health care outcome, and achieve precision. AI can help to predict failures in clinical scenarios and depict reliable solutions. However, AI is increasing the scope of state-of-the-art models in dentistry but is still under development. Further studies are required to assess the clinical performance of AI techniques in dentistry.

A 2D Photographic and 3D Digital Dental Model Analysis of Golden Percentage in Maxillary Anterior Teeth.

The objective of this paper was to evaluate the existence of golden percentage in natural maxillary anterior teeth with the aid of 3D digital dental models and 2D photographs. And to propose regional values of golden percentage for restoration of maxillary anterior teeth. For this purpose, one hundred and ninety dentate subjects with sound maxillary anterior teeth were selected. Standardized frontal images were captured with DSLR, and the apparent width of maxillary anterior teeth was measured utilizing a software on a personal laptop computer. Once the dimensions were recorded, the calculations were made according to the golden percentage theory (GPT). The data were analyzed by independent and paired T-test. The level of significance was set at p < 0.05. The golden percentage values were not found in this study. The values obtained were 16%, 15%, 20%, 20%, 15%, and 16% moving from the right canine to the left canine teeth. There was no significant gender difference in the golden percentage values. Thus, golden percentage should not be used solely for the correction of anterior teeth or for determining dental attractiveness. Emphasis should be given to a range of dental proportion on regional basis.

Root and canal morphology of the anterior permanent dentition in Malaysian population using two classification systems: A CBCT clinical study.

This cone beam computed tomography (CBCT) study aimed to evaluate the root canal morphology of permanent anteriors in Malaysian population using two classification systems (Vertucci 1984 and Ahmed et al 2017). CBCT images of 856 patients with 10,080 anterior teeth were analysed. Results showed that, except for six mandibular canines, all anterior teeth were single-rooted. According to Ahmed et al's system and Vertucci's classification, code 1 MaxA1 and type I were the most common types except in mandibular laterals where 1 ManA1-2-1 and type III were the most common, respectively. The prevalence of canal variations in mandibular incisors was higher in males and the 20-30 age group than in females and other age groups (P < 0.001). The Malay ethnic group showed more canal variations in mandibular incisors than Chinese and Indians (P < 0.001). Mandibular anteriors showed a wide range of canal variations, and the canal complexity is significantly affected by sex, ethnicity and age. The new classification provides an accurate presentation for root canal morphology.

Nonprescription Bleaching versus Home Bleaching with Professional Prescriptions: Which One is Safer? A Comprehensive Review of Color Changes and Their Side Effects on Human Enamel.

OBJECTIVES: This study evaluates the efficacy and safety of the professionally prescribed and nonprescription over-the-counter (OTC) bleaching agents. MATERIALS AND: METHODS: Extracted human upper central incisors were prepared and stained with red wine for 14 days before being subjected to four different bleaching agents: professionally prescribed opalescence PF 15%, VOCO Perfect Bleach 10%, nonprescription OTC Crest 3D Whitestrips, and Whitelight Teeth Whitening System. Colorimetric measurement was performed with Vita Easyshade Handheld Spectrophotometer, enamel surface microhardness measured using Vickers Hardness machine, and surface roughness was evaluated with profilometer, before and after bleaching. Scanning electron microscope (SEM) evaluation and atomic force microscopy were conducted postbleaching. STATISTICAL ANALYSIS: The data were analyzed with t-test, two-way ANOVA, one-way ANOVA, and Turkey's test at a significance level of 5%. RESULTS: All bleaching products have the same efficacy to whiten stained enamel. Opalescence PF 15% showed significant increase in the microhardness (92.69 ± 68.316). All groups demonstrated significant increase in surface roughness (p < 0.05). SEM evaluation showed that Opalescence PF 15% resulted in same microscopic appearance as unbleached enamel, while VOCO Perfect Bleach 10%, Whitelight Teeth Whitening System and Crest 3D Whitestrips demonstrated mild to moderate irregularities and accentuated irregularities, respectively. CONCLUSION: Professionally prescribed bleaching agent of Opalescence PF 15% is effective tin whitening the teeth, while the other bleaching products may be effective but also have deleterious effects on the enamel.

Cone-beam computed tomography analysis on root and canal morphology of mandibular first permanent molar among multiracial population in East Coast Malaysian population.

OBJECTIVE: The aim of this study is to investigate the variations in the number of root and canal in the mandibular first permanent molars (MFPMs) teeth in East Coast Malaysian population using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: CBCT images which show MFPMs recorded in HUSM Dental Clinic between January 2015 and June 2016 was obtained and analyzed for their number of roots and canals. A total of 208 CBCT images of MFPMs were collected; 118 patients had unilateral molars and 90 patients had bilateral molars. The following observations were made: (1) root number; (2) number of canals per root; and (3) comparisons of number of roots and canals according to gender, ethnicity, and position. RESULTS: The majority of cases of bilateral MFPM had the same number of roots (95.6%, 95% confidence interval [CI]: 89.01%, 98.78%) on both the right and left side and only 4 cases (4.4%, 95% CI: 1.22%, 10.99%) had 3 roots on the right and 2 roots on the left sides. The majority of cases had the same number of canals on both sides (66.7%, 95% CI: 55.95, 76.26%) and 33.3% (95% CI: 23.74%, 44.05%) with unequal number of canals. The occurrence of the number of canals was not independent of the sides of the arch (P < 0.001) and there was statistically significantly greater proportion of cases who had greater number of canals on the right side than the left (P = 0.03). The prevalence of right single-rooted MFPM was very small at 0.3% (n = 1) in a Malay male (95% CI: 0.00, 1.83) and the most prevalent was two roots first molar (88.4%). The number of roots was not associated with sex or ethnic group (P > 0.05). The MFPM with a single root was found to have only one mesial canal. For two rooted MFPM, the most prevalent occurrence was two canals at the mesial and one canal at the distal roots (59%); followed by single canals in each mesial and distal (21%) and double canals per root (18%). Three roots MFPM have either single or double canals in the mesial root and double canals in the distal root. CONCLUSIONS: The majority of population in the East Coast region of Malaysia has two roots and three root canals in their MFPMs. There was no difference in the number of roots between gender and ethnic and canals between ethnic.

Partial Mandibulectomy Rehabilitation of Keratocystic Odontogenic Tumour Case in Neutral Zone.

Restoring the patient's missing dentition secondary to partial mandibulectomy of KCOT is important to improve function and aesthetics. The patient presented with a significant loss of alveolar bone which makes the fabrication of rehabilitation prosthesis a significant challenge. A neutral-zone impression technique is helpful in determining the exact space to be restored without compromising aesthetics and it avoids functional muscle displacement that may displace the prosthesis. This article describes the neutral zone impression technique to record a patient's functional muscular movement in guiding the setting of acrylic teeth and denture flange in the neutral zone area. This technique is very useful for postsurgical cases with significant loss of alveolar bone.

The stamp technique for direct Class II composite restorations: A case series.

BACKGROUND: "Stamp" technique is a new method for placing large composite restorations with accurate occlusal topography. It was introduced mainly to restore Class I cavities and erosively damaged teeth. This technique is indicated when the preoperative anatomy of the tooth is intact and not lost due to the carious lesion. A precise tooth-like filling an accurate functional occlusion is obtained when the stamp technique is applied. However, using this technique to restore Class II cavities is not established yet. AIM: To introduce modifications of the stamp technique that make it applicable to restore Class II composite restorations. MATERIALS AND METHODS: The traditional materials and tools used for direct composite restorations are needed with no additional instruments. Clinical illustrations and step-by-step description are provided in this paper. RESULTS AND CONCLUSION: Using the stamp technique to restore Class II cavities is achievable, simple and practical, and result in a very accurate anatomical restoration.