ABSTRACT
The review focuses on speciation and migration of anthropogenic ruthenium (Ru) originated from nuclear industry releases and presents updated information regarding Ru in the environment. It provides analysis of the main pathways of Ru species distribution in the aqueous and terrestrial environment, starting from its natural occurrence, generation and release from anthropogenic sources, predominant speciation, and ending with bioaccumulation, which can be directly or indirectly related to human health. Literature sources belonging to the post-Chernobyl time frame were preferentially considered, in which Ru-103 and Ru-106 are the major fission isotopes studied due to their traceability in the environment and their relatively long half-lives.
ABSTRACT
The mechanism by which high concentrations (1.5 M in n-dodecane) of N,N-di-2-ethylhexyl-isobutyramide (DEHiBA) extracts HNO3 and UO2(NO3)2 is under examination. Most prior studies have examined the extractant and the mechanism at a concentration of 1.0 M in n-dodecane; however, under the higher loading conditions that can be achieved by a higher concentration of extractant, this mechanism could change. Increased extraction of both nitric acid and uranium is observed with an increased concentration of DEHiBA. The mechanisms are examined by thermodynamic modeling of distribution ratios, 15N nuclear magnetic resonance (NMR) spectroscopy, and Fourier transform infrared (FTIR) spectroscopy coupled with principal component analysis (PCA). Speciation diagrams produced through thermodynamic modeling have been qualitatively reproduced through PCA of the FTIR spectra. The predominant extracted species of HNO3(DEHiBA), HNO3(DEHiBA)2, and UO2(NO3)2(DEHiBA)2 are in good agreement with prior literature reports for 1.0 M DEHiBA systems. Evidence for an additional species of either UO2(NO3)2(DEHiBA) or UO2(NO3)2(DEHiBA)2(HNO3) also contributing to the extraction of uranium species is given.
ABSTRACT
Electric field gradient (EFG) tensors in the equatorial plane of the linear UO22+ ion have been measured by nuclear magnetic resonance (NMR) and nuclear quadrupole resonance (NQR) experiments and computed by relativistic Kohn-Sham methods with and without environment embedding for Cs2UO2Cl4 and Cs2UO2Br4. This approach expands the possibilities for probing the electronic structure in uranyl complexes beyond the strongly covalent U-O bonds. The combined analyses find that one of the two largest principal EFG tensor components at the halogen sites points along the U-X bond (X = Cl, Br), and the second is parallel to the UO22+ ion; in Cs2UO2Cl4, the components are nearly equal in magnitude, whereas in Cs2UO2Br4, due to short-range bromide-cesium interactions, the equatorial component is dominant for one pair of Br sites and the axial component is larger for the second pair. The directions and relative magnitudes of the field gradient principal axes are found to be sensitive to the σ and π electron donation by the ligands and the model of the environment. Chlorine-35 NQR spectra of 235U-depleted and 235U-enriched Cs2UO2Cl4 exhibited no uranium-isotope-dependent shift, but the resonance of the depleted sample displayed a 58% broader line width.
ABSTRACT
Technetium-99 (Tc), a high yield fission product generated in nuclear reactors, is one of the most difficult contaminants to address at the U.S. Department of Energy Hanford, Savannah River, and other sites. In strongly alkaline solutions typifying Hanford tank waste, Tc exists as pertechnetate (TcO4-) (oxidation state VII) as well as in reduced forms (oxidation state < VII), collectively known as non-pertechnetate (non-TcO4-) species. Designing strategies for effective Tc management, including separation and immobilization, necessitates understanding the molecular structure of the non-TcO4- species and their identification in actual tank waste samples. Identification of non-TcO4- species would facilitate the development of new treatment technologies effective for dissimilar Tc species. Toward this objective, a spectroscopic library of the Tc(I) [fac-Tc(CO)3]+ and Tc(II, IV, V, VII) compounds was generated and applied to the characterization of the actual Hanford AN-102 tank waste supernatant, which was processed to adjust Na concentration to â¼5.6 M and remove 137Cs by spherical resorcinol-formaldehyde (sRF) ion-exchange resin. Post 137Cs removal, the cesium-loaded sRF column was eluted with 0.45 M HNO3. As-received AN-102, Cs-depleted effluent, and sRF eluate fractions were comprehensively characterized for chemical composition and speciation of Tc using 99Tc nuclear magnetic resonance spectroscopy and X-ray absorption spectroscopy. It was demonstrated for the first time that non-TcO4- Tc present in the AN-102 tank waste is composed of several low-valent Tc species, including the Tc(I) [fac-Tc(CO)3]+ and Tc(IV) compounds. This is the first demonstration of multiple non-TcO4- species co-existing in the Hanford tank waste, highlighting their importance for the waste processing.
ABSTRACT
On-line monitoring based on optical spectroscopy provides unprecedented insight into the chemical composition of process streams or batches. Amplifying this approach through utilizing multiple forms of optical spectroscopy in sensor fusion can greatly expand the number and type of chemical species that can be identified and quantified. This is demonstrated herein, on the analysis of used nuclear fuel recycling streams: highly complex processes with multiple target and interfering analytes. The optical techniques of visible absorbance, near-infrared absorbance, and Raman spectroscopy were combined to quantify plutonium(III, IV, VI), uranium(IV, VI), neptunium(IV, V, VI), and nitric acid. Chemometric modeling was used to quantify analytes in process streams in real time, and results were successfully used to enable immediate process control and generation of a product stream at a set composition ratio. This represents a significant step forward in the ability to monitor and control complex chemical processes occurring in harsh chemical environments.
Subject(s)
Spectroscopy, Near-Infrared , Spectrum Analysis, RamanABSTRACT
Coordination of trivalent lanthanide and actinide metal ions by lipophilic diglycolamides and phosphonic acids has been proposed for their separation through extraction from aqueous nitric acid solutions. However, the nature of M3+ coordination complexes in these combined solvent systems is not well understood, resulting in low predictability of their behavior. This work demonstrates that a combination of N,N,N',N'-tetrakis(2-ethylhexyl)diglycolamide (T2EHDGA) and weakly acidic 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) in n-dodecane exhibits a complicated extraction mechanism for Eu3+ and Am3+, which continuously evolves as a function of the aqueous phase acidity. At low aqueous phase nitric acid concentrations, M3+ ions are primarily extracted via exchange of the phosphonic acid proton and coordination with HEH[EHP]. At high aqueous phase nitric acid concentrations, HEH[EHP] remains protonated, and M3+ ions are transported to the organic phase by the coextraction of nitrate anions from the aqueous phase, thus forming complex species with T2EHDGA. At moderate acid regimes, both ligands participate in the coordination of M3+ ions and show a synergistic relationship resulting in considerable enhancement of M3+ transport into the combined solvent system over the simple sum of the individual extractants. The observed synergism is caused by differences in organic phase M3+ speciation and has a significant impact on the performance of the organic solvent. Distribution studies with Eu3+ indicate that nominally two or three T2EHDGA ligands participate in metal extraction in the presence of phosphonic acid, while nominally three diglycolamide ligands participate in the presence or absence of phosphonic acid. While synergistic behavior has been observed in many solvent-extraction processes, this system demonstrates a clear correlation between the continuously changing organic speciation of M3+ and its transport into the organic solvent. This paper reports the spectroscopic characterization of the organic phase M3+ species by IR, X-ray absorption, and visible spectroscopies. Spectroscopic evidence indicates a mixed-ligand complex, i.e., a ternary complex at the moderate acid regime, where the greatest degree of synergism is observed. Differences in synergistic extraction of Am3+ and Eu3+ at the low acid regime were observed, indicating their dissimilar extraction behavior.
ABSTRACT
Rapid, selective, and in situ detection of pertechnetate (TcO4-) in multicomponent matrices consisting of interfering anions such as the ubiquitous NO3- and Cl- or the isostructural CrO42- is challenging. Present sensors lack the selectivities to exclude these interferences or the sensitivities to meet detection limits that are lower than the drinking water standards across the globe. This work presents an affinity-based electrochemical sensor for TcO4- detection that relies on selective reductive precipitation of aqueous TcO4- induced by a 1,4-benzenedimethanethiol capture probe immobilized on an electrode platform. This results in a direct decrease in the electron transfer current, the magnitude of the decrease being proportional to the amount of TcO4- added. Using this approach, a detection limit of 1 × 10-10 M was achieved, which is lower than the drinking water standard of 5.2 × 10-10 M set by United States Environmental Protection Agency. The proposed approach shows selectivity to the TcO4- anion, allowing detection of TcO4- from a multicomponent groundwater sample obtained from a well at the Hanford site in Washington (well 299-W19-36) that also contained NO3-, Cl-, and CrO42-, without discernably affecting the detection limits.
Subject(s)
Sodium Pertechnetate Tc 99m/analysis , Water Pollutants, Chemical/analysis , Benzene Derivatives/chemistry , Electrochemical Techniques , Electrodes , Environmental Monitoring , Gold/chemistry , Groundwater/analysis , Oxidation-Reduction , Photoelectron Spectroscopy , Sulfhydryl Compounds/chemistryABSTRACT
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
ABSTRACT
The sequestration of metal ions into the crystal structure of minerals is common in nature. To date, the incorporation of technetium(IV) into iron minerals has been studied predominantly for systems under carefully controlled anaerobic conditions. Mechanisms of the transformation of iron phases leading to incorporation of technetium(IV) under aerobic conditions remain poorly understood. Here we investigate granular metallic iron for reductive sequestration of technetium(VII) at elevated concentrations under ambient conditions. We report the retarded transformation of ferrihydrite to magnetite in the presence of technetium. We observe that quantitative reduction of pertechnetate with a fraction of technetium(IV) structurally incorporated into non-stoichiometric magnetite benefits from concomitant zero valent iron oxidative transformation. An in-depth profile of iron oxide reveals clusters of the incorporated technetium(IV), which account for 32% of the total retained technetium estimated via X-ray absorption and X-ray photoelectron spectroscopies. This corresponds to 1.86 wt.% technetium in magnetite, providing the experimental evidence to theoretical postulations on thermodynamically stable technetium(IV) being incorporated into magnetite under spontaneous aerobic redox conditions.
ABSTRACT
Expanded low-carbon baseload power production through the use of nuclear fission can be enabled by recycling long-lived actinide isotopes within the nuclear fuel cycle. This approach provides the benefits of (a) more completely utilizing the energy potential of mined uranium, (b) reducing the footprint of nuclear geological repositories, and (c) reducing the time required for the radiotoxicity of the disposed waste to decrease to the level of uranium ore from one hundred thousand years to a few hundred years. A key step in achieving this goal is the separation of long-lived isotopes of americium (Am) and curium (Cm) for recycle into fast reactors. To achieve this goal, a novel process was successfully demonstrated on a laboratory scale using a bank of 1.25-cm centrifugal contactors, fabricated by additive manufacturing, and a simulant containing the major fission product elements. Americium and Cm were separated from the lanthanides with over 99.9% completion. The sum of the impurities of the Am/Cm product stream using the simulated raffinate was found to be 3.2 × 10-3 g/L. The process performance was validated using a genuine high burnup used nuclear fuel raffinate in a batch regime. Separation factors of nearly 100 for 154Eu over 241Am were achieved. All these results indicate the process scalability to an engineering scale.
ABSTRACT
Understanding fundamental Tc chemistry is important to both the remediation of nuclear waste and the reprocessing of nuclear fuel; however, current knowledge of the electronic structure and spectral signatures of low-valent Tc compounds significantly lags behind the remainder of the d-block elements. In particular, identification and treatment of Tc speciation in legacy nuclear waste is challenging due to the lack of reference data especially for Tc compounds in the less common oxidation states (I-VI). In an effort to establish a spectroscopic library corresponding to the relevant conditions of extremely high ionic strength typical for the legacy nuclear waste, compounds with the general formula of [ fac-Tc(CO)3(OH2)3- n(OH) n]1- n (where n = 0-3) were examined by a range of spectroscopic techniques including 99Tc/13C NMR, IR, XPS, and XAS. In the series of monomeric aqua species, stepwise hydrolysis results in the increase of the Tc metal center electron density and corresponding progressive decrease of the Tc-C bond distances, Tc electron binding energies, and carbonyl stretching frequencies in the order [ fac-Tc(CO)3(OH2)3]+ > [ fac-Tc(CO)3(OH2)2(OH)] > [ fac-Tc(CO)3(OH2)(OH)2]-. These results correlate with established trends of the 99Tc upfield chemical shift and carbonyl 13C downfield chemical shift. The lone exception is [ fac-Tc(CO)3(OH)]4 which exhibits a comparatively low electron density at the metal center attributed to the µ3-bridging nature of the -OH ligands causing less σ-donation and no π-donation. This work also reports the first observations of these compounds by XPS and [ fac-Tc(CO)3Cl3]2- by XAS. The unique and distinguishable spectral features of the aqua [ fac-Tc(CO)3]+ complexes lay the foundation for their identification in the complex aqueous matrixes.
ABSTRACT
Technetium-99 (Tc) displays a rich chemistry due to its wide range of accessible oxidation states (from -I to +VII) and ability to form coordination compounds. Determination of Tc speciation in complex mixtures is a major challenge, and (99)Tc nuclear magnetic resonance (NMR) spectroscopy is widely used to probe chemical environments of Tc in odd oxidation states. However, interpretation of (99)Tc NMR data is hindered by the lack of reference compounds. Density functional theory (DFT) calculations can help to fill this gap, but to date few computational studies have focused on (99)Tc NMR of compounds and complexes. This work evaluates the effectiveness of both pure generalized gradient approximation and their corresponding hybrid functionals, both with and without the inclusion of scalar relativistic effects, to model the (99)Tc NMR spectra of Tc(I) carbonyl compounds. With the exception of BLYP, which performed exceptionally well overall, hybrid functionals with inclusion of scalar relativistic effects are found to be necessary to accurately calculate (99)Tc NMR spectra. The computational method developed was used to tentatively assign an experimentally observed (99)Tc NMR peak at -1204 ppm to fac-Tc(CO)3(OH)3(2-). This study examines the effectiveness of DFT computations for interpretation of the (99)Tc NMR spectra of Tc(I) coordination compounds in high salt alkaline solutions.
ABSTRACT
The electrochemical oxidation of thioethers is shown to be facilitated by neighboring amide participation. (1)H NMR spectroscopic analysis in acetonitrile solution of two conformationally constrained compounds with such facilitation shows that two-electron participation by the amide π2 orbital can occur to stabilize the developing sulfur radical cation.
ABSTRACT
Structural studies performed in this laboratory of organophosphorus pesticides continue with these related compounds. The -NO2 groups of methyl parathion (systematic name: dimethyl 4-nitrophenyl phosphorothioate, C8H10NO5PS) and dicapthon (systematic name: 2-chloro-4-nitrophenyl dimethyl phosphorothioate, C8H9ClNO5PS) make dihedral angles of 10.67â (8) and 5.8â (1)°, respectively, with the planes of their attached rings, which accompanies angular distortion at the ring C atoms to which the -NO2 groups are attached. Similar distortions are observed at the C atom to which the thiophosphate groups are attached. Significant differences in distances and angles around the phenolic O, versus the -OMe groups, explain why it is the site of hydrolysis for these compounds. A comparison of a torsion angle involving the thiophosphate group and phenolic O atom with similar pesticide structures is given and indicates steric influences on that angle.
ABSTRACT
Reductive cleavage of disulfide bonds is an important step in many biological and chemical processes. Whether cleavage occurs stepwise or concertedly with electron transfer is of interest. Also of interest is whether the disulfide bond is reduced directly by intermolecular electron transfer from an external reducing agent or mediated intramolecularly by internal electron transfer from another redox-active moiety elsewhere within the molecule. The electrochemical reductions of 4,4'-bipyridyl-3,3'-disulfide (1) and the di-N-methylated derivative (2(2+)) have been studied in acetonitrile. Simulations of the cyclic voltammograms in combination with DFT (density functional theory) computations provide a consistent model of the reductive processes. Compound 1 undergoes reduction directly at the disulfide moiety with a substantially more negative potential for the first electron than for the second electron, resulting in an overall two-electron reduction and rapid cleavage of the S-S bond to form the dithiolate. In contrast, compound 2(2+) is reduced at less negative potential than 1 and at the dimethyl bipyridinium moiety rather than at the disulfide moiety. Most interesting, the second reduction of the bipyridinium moiety results in a fast and reversible intramolecular two-electron transfer to reduce the disulfide moiety and form the dithiolate. Thus, the redox-active bipyridinium moiety provides a low energy pathway for reductive cleavage of the S-S bond that avoids the highly negative potential for the first direct electron reduction. Following the intramolecular two-electron transfer and cleavage of the S-S bond the bipyridinium undergoes two additional reversible reductions at more negative potentials.
ABSTRACT
Alkylation of the hydrobromide salts of 1,4,7-tris(methoxycarbonylmethyl)-1,4,7,10-tetraazacyclododecane and 1,4,7-tris(ethoxycarbonylmethyl)-1,4,7,10-tetraazacyclododecane with appropriate α-bromoacetamides, followed by hydrolysis, provides convenient access to 10-(2-alkylamino-2-oxoethyl)-1,4,7,10-tetraazacyclododecane-1,4,7-triacetic acid derivatives that contain acid-sensitive functional groups. The utility of the method is demonstrated by improved syntheses of two known DOTA monoamides bearing acid-sensitive ω-tritylthio alkyl chains in much higher yields based on cyclen as the starting material.
ABSTRACT
Although bis(α-diimine)Ni complexes were prepared when amine-substituted chelates were added to Ni(COD)2, the incorporation of strong-field phosphine donors allowed the isolation of (κ(4)-N,N,P,P-DI)Ni hydrosilylation catalysts. The crystallographic investigation of two different (κ(4)-N,N,P,P-DI)Ni compounds revealed that the geometry about nickel influences the observed degree of α-diimine reduction.
ABSTRACT
In the title mol-ecule, C21H20BrClN6O2, the chloro-substituted benzene ring forms a dihedral angle of 77.84â (7)° with the tetra-zole ring and the bromo-substituted ring forms a dihedral angle of 43.95â (6)° with the imidazole ring. The dihedral angle between the tetra-zole and imidazole rings is 67.42â (8)°. The terminal methyl group of the butyl substituent is disordered over two sets of sites, with refined occupancies 0.67â (3) and 0.33â (3). In the crystal, there is a short Brâ¯N contact of 3.183â (2)â Å.
ABSTRACT
In the title compound, C(16)H(22)Cl(2)N(2)O(2), the substituted piperidine ring adopts a chair conformation with both substituents in equatorial positions. In the crystal, N-Hâ¯O and C-Hâ¯O hydrogen bonds connect mol-ecules into ribbons along the a-axis direction.