Characterization of residual debris on packaged hip arthroplasty stems demonstrates the dominance of less than 10 µm sized particulate: Updated USP788 guidelines for orthopedic implants.

Past evaluation of particle contamination on packaged implants has typically been conducted using US Pharmacopeia (USP) 788, a 1970s pharmaceutical guideline created to evaluate contaminant particles in injectable fluids and syringes. Our objective was to reestablish relevant acceptance criteria for residual orthopedic and other implant debris, including smaller particles (i.e., <10 µm in diameter). Packaged total hip arthroplasty (THA) titanium (Ti6Al4V)-alloy femoral stems were used (hydroxyapatite [HA]-coated and non-coated stems). Short-term ultrasonication and longer-term 24-hour soak/agitation methods were used to elute surface-bound contaminant particles, and released particles were analyzed via scanning electron microscopy, energy-dispersive x-ray analysis, image analysis, and particle characterization. For HA-coated THA-stems, >99% of eluted particles were calcium phosphate. For plain non-coated THA-stems, >99% of eluted particles were titanium-alloy-based. The number-based median size of particles in both groups was approximately 1.5 µm in diameter despite being composed of different materials. The total volume of particulate removed from HA-coated stems was 0.037 mm3 (671 × 103 particles total), which was approximately >50-fold more volume than that on plain non-coated stems at 0.0006 mm3 (89 × 103 particles total). Only non-coated THA stems passed reestablished USP788 acceptance criteria, compared by using equivalent total volumes of contaminant particulate within new and legacy guideline ranges of >10 and >25 µm ECD, that is, <1.0 × 107 particles for <1 µm diameter in size, <600,000 for <1-10 µm, <6000 for 10-25 µm and <600 for >25 µm. These results fill a knowledge gap on how much residual debris can be expected to exist on packaged implants and can be used as a basis for updating acceptance criteria (i.e., termed USP788-Implant [USP788-I]). Residual implant particulate assessment is critical given the increasing implant complexity and new manufacturing techniques (e.g., additive manufacturing).

Establishing clinically meaningful ranges of metal hypersensitivity in orthopaedic patients using COVID-19 vaccine-induced adaptive immune responses from fully vaccinated adults.

Background: This study aimed to assess metal sensitization ranges among orthopaedic patients by comparing adaptive immune responses in all-comer pre- and post-operative orthopaedic adults who were COVID-19 unvaccinated or vaccinated vs patients with a painful aseptic implant by lymphocyte transformation test (LTT) to SARS-CoV-2-Spike-Protein (SP) and implant metal(s), respectively. Methods: Data were retrospectively reviewed from three independent groups: unvaccinated COVID-19 adults (n = 23); fully COVID-19 vaccinated adults (n = 35); unvaccinated, painful aseptic implant patients with history of metal allergy (n = 98). Standard in vitro LTT for SP and implant metal(s) (nickel, cobalt) were performed and rated as negative (stimulation index [SI]<2), mild (SI ≥ 2), positive (SI ≥ 4-15), and high sensitization (SI > 15) adaptive immune responses to tested antigen. Results: Overall, 17/23 (74%) of unvaccinated adults showed negative to mild LTT ranges, and 35/35 (100%) of vaccinated showed mild to positive LTT ranges to SP. Vaccinated individuals showed significantly higher median SI (16.1) to SP than unvaccinated (median SI, 1.7; P < 0.0001). Most vaccinated adults (94%) showed a lymphocyte SI > 4 to SP, establishing LTT SI ≥ 4 with >90% sensitivity for diagnosing effective COVID-19 adaptive immune responses. Significantly fewer painful orthopaedic patients (41%) showed comparable elevated levels of lymphocyte metal sensitivity at SI ≥ 4 compared to vaccinated group (P < 0.0001). Conclusions: Vaccinated adults showed significantly higher lymphocyte SI to SP than unvaccinated indicating that SI ranges ≥4 should be set as unequivocally diagnostic of LTT-positive adaptive immune responses to tested antigen. This analysis supports using higher LTT SI ranges (SI ≥ 4) in diagnosing clinical orthopaedic-related Type IV metal-hypersensitivity responses among orthopaedic patients.

Translational Characterization of Macrophage Responses to Stable and Non-Stable CoCrMo Wear and Corrosion Debris Generated In-Situ for Total Hip Replacement.

Metal wear and corrosion debris remain a limiting factor for long-term durability of total hip replacement (THR). Common wear particle production techniques for research differ from the actual tribocorrosion processes at the implant site, potentially causing loss of valuable information. The aim of this study was to investigate reactions to freshly generated and time-stabilized particles and ions released from CoCrMo-alloy using a bio-tribometer, which mimics conditions of the periprosthetic environment. THP-1 macrophages were challenged with freshly produced or time-stabilized wear debris. Wear generation took place in a custom-built bio-tribometer inside a CO2 incubator operating with a reciprocating rotation of an Al2O3 ball against a CoCrMo disc. Two different electrochemical conditions with increasingly forced corrosion rates were tested: +0.45 V (passive domain) and +0.67 V (transition to transpassive domain). Cell viability, proinflammatory cytokines, electrochemical measurements and ICP-MS metal ion content analyses were performed. Cobalt/ chromium concentrations were 6.6/ 1.6 ppm in the passive domain and almost doubled to 11.4/ 3.0 ppm in the passive-transpassive domain. Under those electrochemical conditions, freshly produced and time-stabilized CoCrMo wear decreased cell viability to the same extent. Secretion of proinflammatory cytokines were not significantly different for freshly produced and time-stabilized debris. This study suggests that freshly generated and time-stabilized metal particles/ions cause similar toxicity and inflammatory reactions in macrophages, indicating that standard practices for generating wear debris are valid methods to evaluate wear particle disease. Other cell types, materials, and corrosion potentials need to be studied in the future to solidify the conclusion.

COVID-19 (SARS-CoV-2) lymphocyte responses are associated with inflammatory biomarkers in total joint replacement surgery candidates pre-operatively.

BACKGROUND: Recent studies indicate that, in addition to antibody production, lymphocyte responses to SARS-CoV-2 may play an important role in protective immunity to COVID-19 and a percentage of the general population may exhibit lymphocyte memory due to unknown/asymptomatic exposure to SARS-CoV-2 or cross-reactivity to other more common coronaviruses pre-vaccination. Total joint replacement (TJR) candidates returning to elective surgeries (median age 68 years) may exhibit similar lymphocyte and/or antibody protection to COVID-19 prior to vaccination METHODS: In this retrospective study, we analyzed antibody titters, lymphocyte memory, and inflammatory biomarkers specific for the Spike and Nucleocapsid proteins of the SARS-CoV-2 virus in a cohort of n=73 returning TJR candidates (knees and/or hips) pre-operatively. RESULTS: Peripheral blood serum of TJR candidate patients exhibited a positivity rate of 18.4% and 4% for IgG antibodies specific for SARS-CoV-2 nucleocapsid and spike proteins, respectively. 13.5% of TJR candidates exhibited positive lymphocyte reactivity (SI > 2) to the SARS-CoV-2 nucleocapsid protein and 38% to the spike protein. SARS-CoV-2 reactive lymphocytes exhibited a higher production of inflammatory biomarkers (i.e., IL-1ß, IL-6, TNFα, and IL-1RA) compared to non-reactive lymphocytes. CONCLUSIONS: A percentage of TJR candidates returning for elective surgeries exhibit pre-vaccination positive SARS-CoV-2 antibodies and T cell memory responses with associated pro-inflammatory biomarkers. This is an important parameter for understanding immunity, risk profiles, and may aid pre-operative planning. TRIAL REGISTRATION: Retrospectively registered.

Fretting-corrosion in hip taper modular junctions: The influence of topography and pH levels - An in-vitro study.

Contemporary hip implants feature a modular design. Increased reported failure rates associated with the utilization of modular junctions have raised many clinical concerns. Typically, these modular interfaces contain circumferential machining marks (threads or microgrooves), but the effect of the machining marks on the fretting-corrosion behavior of total hip implant materials is unknown. This study reports the effects of microgrooves on the fretting-corrosion behavior of hip implant materials. The flat portions of two cylindrical, polished, CrCrMo alloy pins were loaded horizontally against one rectangular Ti alloy rod. Two surface preparation groups were used for the Ti6Al4V rod (polished and machined). The polished group was prepared using the same methods as the CoCrMo pins. The machined samples were prepared by creating parallel lines on the rod surfaces to represent microgrooves present on the stem tapers of head-neck modular junctions. Newborn calf serum (30 g/L protein content; 37 °C) at pH of levels of 7.6 and 3.0 were used to simulate the normal joint fluid and a lowered pH within a crevice, respectively. The samples were tested in a fretting corrosion apparatus under a 200N normal force and a 1Hz sinusoidal fretting motion with a displacement amplitude of 25 µm. All electrochemical measurements were performed with a potentiostat in a three-electrode configuration. The results show significant differences between machined samples and polished samples in both electrochemical and mechanical responses. In all cases, the magnitude of the drop in potential was greater in the machined group compared to the polished group. The machined group showed a lower total dissipated friction energy for the entire test compared to the polished group. Additionally, the potentiostatic test measurements revealed a higher evolved charge in the machined group compared to the polished group at both pH conditions (pH 7.6 and 3.0). The machined surfaces lowered the overall dissipated friction energy at pH 7.6 compared to pH 3.0, but also compromised electrochemical performance in the tested conditions. Therefore, the role of synergistic interaction of wear and corrosion with surface topographical changes is evident from the outcome of the study. Despite the shift towards higher electrochemical destabilization in the machined group, both polished and machined groups still exhibited a mechanically dominated degradation.

Do Battlefield Injury-acquired Indwelling Metal Fragments Induce Metal Immunogenicity?

BACKGROUND: A battlefield-related injury results in increased local and systemic innate immune inflammatory responses, resulting in wound-specific complications and an increased incidence of osteoarthritis. However, little is known about whether severe injuries affect long-term systemic homeostasis, for example, immune function. Moreover, it also remains unknown whether battlefield-acquired metal fragments retained over the long term result in residual systemic effects such as altered immune reactivity to metals. QUESTIONS/PURPOSES: Does a retained metal fragment from a battlefield injury contribute to increased (1) adaptive metal-specific immune responses, (2) systemically elevated metal ion serum levels, and (3) serum immunoglobulin levels compared with combat injuries that did not result in a retained metal fragment? METHODS: In this pilot study, we analyzed metal-immunogenicity in injured military personnel and noninjured control participants using lymphocyte transformation testing (LTT, lymphocyte proliferation responses to cobalt, chromium and nickel challenge at 0.001, 0.01 and 0.1-mM concentrations in triplicate for each participant), serum metal ion analysis (ICP-mass spectroscopy), and serum immunoglobulin analysis (IgE, IgG, IgA, and IgM ). Military personnel with a battlefield-sustained injury self-recruited without any exclusion for sex, age, degree of injury. Those with battlefield injury resulting in retained metal fragments (INJ-FRAG, n = 20 male, mean time since injury ± SD was 12 ± 10 years) were compared with those with a battlefield injury but without retained metal fragments (INJ-NO-FRAG, n = 12 male, mean time since injury ± SD was 13 ± 12 years). A control group comprised of male noninjured participants was used to compare measured immunogenicity metrics (n = 11, males were selected to match battlefield injury group demographics). RESULTS: Military participants with sustained metal fragments had increased levels of metal-induced lymphocyte responses. The lymphocyte stimulation index among military participants with metal fragments was higher than in those with nonretained metal fragments (stimulation index = 4.2 ± 6.0 versus stimulation index = 2.1 ± 1.2 (mean difference 2.1 ± 1.4 [95% confidence interval 5.1 to 0.8]; p = 0.07) and an average stimulation index = 2 ± 1 in noninjured controls. Four of 20 participants injured with retained fragments had a lymphocyte proliferation index greater than 2 to cobalt compared with 0 in the group without a retained metal fragment or 0 in the control participants. However, with the numbers available, military personnel with retained metal fragments did not have higher serum metal ion levels than military participants without retained metal fragment-related injuries or control participants. Military personnel with retained metal fragments had lower serum immunoglobulin levels (IgG, IgA, and IgM) than military personnel without retained metal fragments and noninjured controls, except for IgE. Individuals who were metal-reactive positive (that is, a stimulation index > 2) with retained metal fragments had higher median IgE serum levels than participants who metal-reactive with nonmetal injuries (1198 ± 383 IU/mL versus 171 ± 67 IU/mL, mean difference 1027 ± 477 IU/mL [95% CI 2029 to 25]; p = 0.02). CONCLUSIONS: We found that males with retained metal fragments after a battlefield-related injury had altered adaptive immune responses compared with battlefield-injured military personnel without indwelling metal fragments. Military participants with a retained metal fragment had an increased proportion of group members and increased average lymphocyte reactivity to common implant metals such as nickel and cobalt. Further studies are needed to determine a causal association between exposure to amounts of retained metal fragments, type of injury, personnel demographics and general immune function/reactivity that may affect personal health or future metal implant performance. LEVEL OF EVIDENCE: Level IV, therapeutic study.

Sterile particle-induced inflammation is mediated by macrophages releasing IL-33 through a Bruton's tyrosine kinase-dependent pathway.

Initiation of the innate sterile inflammatory response that can develop in response to microparticle exposure is little understood. Here, we report that a potent type 2 immune response associated with the accumulation of neutrophils, eosinophils and alternatively activated (M2) macrophages was observed in response to sterile microparticles similar in size to wear debris associated with prosthetic implants. Although elevations in interleukin-33 (IL-33) and type 2 cytokines occurred independently of caspase-1 inflammasome signalling, the response was dependent on Bruton's tyrosine kinase (BTK). IL-33 was produced by macrophages and BTK-dependent expression of IL-33 by macrophages was sufficient to initiate the type 2 response. Analysis of inflammation in patient periprosthetic tissue also revealed type 2 responses under aseptic conditions in patients undergoing revision surgery. These findings indicate that microparticle-induced sterile inflammation is initiated by macrophages activated to produce IL-33. They further suggest that both BTK and IL-33 may provide therapeutic targets for wear debris-induced periprosthetic inflammation.

Material dependent fretting corrosion in spinal fusion devices: Evaluation of onset and long-term response.

Posterior spinal fusion implants include number of interconnecting components, which are subjected to micromotion under physiological loading conditions inducing a potential for fretting corrosion. There is very little known about the fretting corrosion in these devices in terms of the minimum angular displacement (threshold) necessary to induce fretting corrosion or the amount of fretting corrosion that can arise during the life of the implant. Therefore, the first goal was to evaluate the threshold fretting corrosion in three anatomical orientations and second the long-term fretting corrosion for the three different material types of spinal implants under physiological loading conditions. In threshold test, axial rotation exhibited highest changes in open circuit potential (VOCP in mV) and induced fretting currents (Ifrett in µA) for cobalt chrome (ΔVOCP : 24.71 ± 5.53; ΔIfrett : 4.03 ± 0.51) and stainless steel (ΔVOCP : 28.21 ± 6.97; ΔIfrett : 2.98 ± 0.42) constructs whereas it was flexion-extension for titanium constructs (ΔVOCP : 4.51 ± 2.48; ΔIfrett : 0.38 ± 0.12). Long-term test indicated that the titanium (VOCP :101 ± 0.06; Ifrett : 0.07 ± 0.02) and cobalt chrome (VOCP : 140.67 ± 0.04; Ifrett : 0.12 ± 0.05) constructs were more resistant to the fretting corrosion compared to stainless steel (VOCP : -135.33 ± 0.31; Ifrett : 2.63 ± 1.06). © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2858-2868, 2018.

In vitro simulation of fretting-corrosion in hip implant modular junctions: The influence of pH.

BACKGROUND: The fretting-corrosion behavior of mixed metal contacts is affected by various mechanical and electrochemical parameters. Crevice conditions at the junction and patient-specific pathologies can affect the pH of the prosthetic environment. The main objective of this study is to understand the effect of pH variation at the stem/head junction of the hip implant under fretting corrosion exposure. We hypothesized that pH will have a significant influence on the fretting-corrosion behavior hip implant modular junctions. MATERIALS AND METHODS: A custom-made setup was used to evaluate the fretting corrosion behavior of hip implant modular junctions. A Newborn calf serum solution (30 g/L protein content) was used to simulate the synovial fluid environment. A sinusoidal fretting motion, with a displacement amplitude of +50 µm, was applied to the Ti alloy rod. The effects of pathology driven, periprosthetic pH variation were simulated at four different pH levels (3.0, 4.5, 6.0 and 7.6). Electrochemical and mechanical properties were evaluated before, during, and after the applied fretting motion. RESULTS: The impedance of the system was increased in response to the fretting motion. The hysteresis tangential load/displacement behavior was not affected by pH level. The worn surfaces of CoCrMo pins exhibited the presence of tribolayer or organic deposits, in the pH 4.5 group, which may explain the lower drop in potential and mass loss observed in that group. Mechanically dominated wear mechanisms, namely, adhesive wear was shown in the pH 7.6 group, which may account for a higher potential drop and metal content loss. CONCLUSIONS: This study suggests that the fretting-corrosion mechanisms in hip implant are affected by the pH levels of the surrounding environment and patient-specific factors.

Females with Unexplained Joint Pain Following Total Joint Arthroplasty Exhibit a Higher Rate and Severity of Hypersensitivity to Implant Metals Compared with Males: Implications of Sex-Based Bioreactivity Differences.

BACKGROUND: Recent studies indicate that females demonstrate an increased risk of experiencing adverse local tissue reactions, aseptic loosening, and revision after primary metal-on-metal hip resurfacing arthroplasty compared with males; the underlying biological mechanisms responsible for sex discrepancies in implant failure remain unclear. In addition to anatomical and biomechanical sex differences, there may be inherent immunological disparities that predispose females to more aggressive adaptive immune reactivity to implant debris, i.e., metal sensitivity. METHODS: In this retrospective study, we analyzed sex-associated rates and levels of metal sensitization in 1,038 male and 1,575 female subjects with idiopathic joint pain following total joint arthroplasty (TJA) who were referred for in vitro metal-sensitivity testing. RESULTS: Females demonstrated a significantly higher rate and severity of metal sensitization compared with males. The median lymphocyte stimulation index (SI) among males was 2.8 (mean, 5.4; 95% confidence interval [CI], 4.9 to 6.0) compared with 3.5 (mean, 8.2; 95% CI, 7.4 to 9.0) among females (p < 0.05). Forty-nine percent of females had an SI of ≥4 (reactive) compared with 38% of males, and the implant-related level of pain was also significantly (p < 0.0001) higher among females (mean, 6.8; 95% CI, 6.6 to 6.9) compared with males (mean, 6.1; 95% CI, 6.0 to 6.3). CONCLUSIONS: In a select group of patients who had joint pain following TJA and no evidence of infection and who were referred for metal-sensitivity testing, females exhibited a higher level of pain and demonstrated a higher rate and severity (as measured by lymphocyte SI) of metal sensitization compared with males. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Chemokines Associated with Pathologic Responses to Orthopedic Implant Debris.

Despite the success in returning people to health saving mobility and high quality of life, the over 1 million total joint replacements implanted in the US each year are expected to eventually fail after approximately 15-25 years of use, due to slow progressive subtle inflammation to implant debris compromising the bone implant interface. This local inflammatory pseudo disease state is primarily caused by implant debris interaction with innate immune cells, i.e., macrophages. This implant debris can also activate an adaptive immune reaction giving rise to the concept of implant-related metal sensitivity. However, a consensus of studies agree the dominant form of this response is due to innate reactivity by macrophages to implant debris danger signaling (danger-associated molecular pattern) eliciting cytokine-based and chemokine inflammatory responses. This review covers implant debris-induced release of the cytokines and chemokines due to activation of the innate (and the adaptive) immune system and how this leads to subsequent implant failure through loosening and osteolysis, i.e., what is known of central chemokines (e.g., IL-8, monocyte chemotactic protein-1, MIP-1, CCL9, CCL10, CCL17, and CCL22) associated with implant debris reactivity as related to the innate immune system activation/cytokine expression, e.g., danger signaling (e.g., IL-1ß, IL-18, IL-33, etc.), toll-like receptor activation (e.g., IL-6, tumor necrosis factor α, etc.), bone catabolism (e.g., TRAP5b), and hypoxia responses (HIF-1α). More study is needed, however, to fully understand these interactions to effectively counter cytokine- and chemokine-based orthopedic implant-related inflammation.

TLR4 (not TLR2) dominate cognate TLR activity associated with CoCrMo implant particles.

Innate immune reactions to orthopedic implant debris are the primary cause of total joint replacement (TJR) failure over the long term (15-20 years). The role of pathogen associated pattern recognition receptors (i.e., TLRs) in regulating immune reactivity to metal implant particles remains controversial. Do different TLRs (i.e., TLR2 vs. TLR4) activated by their respective ligands in concert with metal implant debris elicit equivalent innate immune responses? In this investigation, our in vitro and in vivo data indicate that Gram-negative PAMPs are more pro-inflammatory than Gram-positive PAMPs. In vitro results indicated TLR4 activation in concert with CoCrMo orthopedic implant debris (CoCrMo/LPS+) challenged primary macrophages resulted in significantly greater inflammatory responses than CoCrMo/PAM3CSK+ (TLR2). Similarly, in vivo results indicated CoCrMo/LPS+ TLR4 challenge induced a twofold increase in inflammation-induced bone resorption (osteolysis) than CoCrMo/PAM3CSK+ (p < 0.01) or CoCrMo (p < 0.03) alone in an established murine calvaria model. This points to a more potent TLR4-based effect of CoCrMo/LPS+ on innate immune responses, that is, IL-1ß, TNF-α, and resulting osteolysis. Differential CoCrMo/LPS+ induced osteolysis compared to CoCrMo/PAM3CSK+, reveals inherent differences in TLR4 versus TLR2 activation which are relevant to (i) how different types of implant debris elicit differential reactivity, (ii) how TLR2 Gram-positive bacteria benefits from less immune activation possibly due to the down-regulation of TLR2 surface expression, that subsequently impacts Gram-positive infections in TJRs, and (iii) how using TLR4 LPS (a Gram-negative agonist) may not accurately model Gram-positive bacteria responses, alone and/or with specific types of implant particles, particularly CoCrMo alloy. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:1007-1017, 2017.

Fretting-corrosion behavior in hip implant modular junctions: The influence of friction energy and pH variation.

BACKGROUND: Recently, there has been increasing concern in the orthopedic community over the use of hip implant modular devices due to an increasing number of reports of early failure, failure that has been attributed to fretting-corrosion at modular interfaces. Much is still unknown about the electrochemical and mechanical degradation mechanisms associated with the use of such devices. PURPOSE: Accordingly, the purpose of our study was to develop a methodology for testing the fretting-corrosion behavior of modular junctions. METHODS: A fretting-corrosion apparatus was used to simulate the fretting-corrosion conditions of a CoCrMo hip implant head on a Ti6Al4V hip implant stem. The device features two perpendicularly-loaded CoCrMo pins that articulated against a Ti6Al4V rod. A sinusoidal fretting motion was applied to the rod at various displacement amplitudes (25, 50, 100, 150 and 200µm) at a constant load of 200N. Bovine calf serum at two different pH levels (3.0 and 7.6) was used to simulate the fluid environment around the joint. Experiments were conducted in two modes of electrochemical control - free-potential and potentiostatic. Electrochemical impedance spectroscopy tests were done before and after the fretting motion to assess changes in corrosion kinetics. RESULTS: In free potential mode, differences were seen in change in potential as a function of displacement amplitude. In general, VDrop (the drop in potential at the onset of fretting), VFretting, (the average potential during fretting), ΔVFretting (the change in potential from the onset of fretting to its termination) and VRecovery (the change in potential from the termination of fretting until stabilization) appeared linear at both pH levels, but showed drastic deviation from linearity at 100µm displacement amplitude. Subsequent EDS analysis revealed a large number of Ti deposits on the CoCrMo pin surfaces. Potentiostatic tests at both pH levels generally showed increasing current with increasing displacement amplitude. Electrochemical impedance spectroscopy measurements from free potential and potentiostatic tests indicated increased levels of resistance of the system after induction of the fretting motion. In free potential tests, the largest increase in impedance was found for the 100µm group. CONCLUSIONS: We conclude that the 100µm group exhibits deviations from linearity for several parameters, and this was most likely due to adhesive wear between Ti6Al4V and CoCrMo surfaces. Overall, the degradation of the system was dominated by wear at all pH levels, and displacement amplitudes.

Biologic Responses to Orthopedic Implants: Innate and Adaptive Immune Responses to Implant Debris.

Almost 20% of joint replacement implants fail at 15 to 20 years. Reports suggest that systemic effects of metal-on-metal implants and local effects of total joint arthroplasty implants contributing to implant failure are immune system based. Sometimes implant wear debris can cause implant failure resulting from bone fracture, infection, or implant fracture/failure; most often, aseptic osteolysis or loosening leads to wear debris. Debris is produced by wear (primary) or by corrosion. Corrosion-chemical oxidation comprising reduction reactions involving electron transport-produces electrochemical degradation. Metallic implant degradation occurs when electrochemical dissolution and mechanical/physical wear are combined (i.e., tribocorrosion). With metal-on-metal implants, even with relatively low levels of wear and particle release, pathology caused by metal debris such as pseudotumor/fibrous tissue growth can lead to early implant failure.

Antioxidant impregnated ultra-high molecular weight polyethylene wear debris particles display increased bone remodeling and a superior osteogenic:osteolytic profile vs. conventional UHMWPE particles in a murine calvaria model.

Periprosthetic osteolysis remains a major limitation of long-term successful total hip replacements with ultra-high molecular weight polyethylene (UHMWPE) bearings. As intra and extracellular reactive oxygen species are know to contribute to wear debris-induced osteoclastic bone resorption and decreased osteoblastic bone formation, antioxidant doped UHMWPE has emerged as an approach to reduce the osteolytic potential of wear debris and maintain coupled bone remodeling. To test this hypothesis in vivo, we evaluated the effects of crosslinked UHMWPE wear debris particles (AltrX(™) ), versus similar wear particles made from COVERNOX(™) containing UHMWPE (AOX(™) ), in an established murine calvaria model. Eight-week-old female C57B/6 mice (n = 10/Group) received a pre-op micro-CT scan prior to surgical implantation of the UHMWPE particles (2mg), or surgery without particles (sham). Dynamic labeling was performed by intraperitoneal injection of calcein on day 7 and alizarin on day 9, and the calvaria were harvested for micro-CT and histology on day 10. Surprisingly, we found that AOX particles induced significantly more bone resorption (1.72-fold) and osteoclast numbers (1.99-fold) vs. AltrX (p < 0.001). However, AOX also significantly induced 1.64-fold more new bone formation vs. AltrX (p < 0.01). Moreover, while the osteolytic:osteogenic ratio of both particles was very close to 1.0, which is indicative of coupled remodeling, AOX was more osteogenic (Slope = 1.13 ± 0.10 vs. 0.97 ± 0.10). Histomorphometry of the metabolically labeled undecalcified calvaria revealed a consistent trend of greater MAR in AOX vs. AltrX. Collectively, these results demonstrate that anti-oxidant impregnated UHMWPE particles have decreased osteolytic potential due to their increased osteogenic properties that support coupled bone remodeling. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:845-851, 2016.

Cytotoxic effects of cobalt and nickel ions on osteocytes in vitro.

BACKGROUND: Metal-on-metal prostheses undergo wear and corrosion, releasing soluble ions and wear particles into the surrounding environment. Reports described early failures of the metal-on-metal prostheses, with histologic features similar to a Type IV immune response. Mechanisms by which metal wear products and metal ion causing this reaction are not completely understood, and the effects of metal ions on osteocytes, which represent more than 95% of all the bone cells, have not been also studied. We hypothesized that soluble metal ions released from the cobalt-chromium-molybdenum (Co-Cr-Mo) prosthesis may have cytotoxic effect on osteocytes. METHODS: MLO-Y4 osteocytes were treated with various metal ion solutions for 24 and 48 h. The effect of ion treatment on cytotoxicity was assessed by WST-1 reagents and cell death ELISA. Morphological changes were analyzed by a phase-contrast microscope or fluorescent microscope using Hoechst 33342 and propidium iodine staining. RESULTS: Cr and Mo ions did not cause cell death under 0.50 mM, highest concentration studied, whereas Co and Ni ions had significant cytotoxic effect on MLO-Y4 cells at concentrations grater than 0.10 mM and at 0.50 mM, respectively, in a dose-dependent manner. According to the ELISA data, osteocytes treated with Co ions were more susceptible to necrotic than apoptotic cell death, while Ni ions caused osteocyte apoptosis. The morphological assays show that cells treated with Co and Ni ions at high concentration were fewer in number and rounded. In addition, fluorescent images showed a marked reduction in live cells and an increase in dead osteocytes treated with Co and Ni ions at high concentration. CONCLUSIONS: Metal ions released from metal-on-metal bearing surfaces have potentially cytotoxic effects on MLO-Y4 osteocytes, in vitro.

Effect of a second joint arthroplasty on metal ion levels after primary total hip arthroplasty.

Serum metal ion levels increase after primary total hip arthroplasty (THA) regardless of bearing surface. We conducted a study to determine the effect of a second joint arthroplasty on existing serum metal ion levels at long-term followup. Twelve patients underwent primary THA and then either another THA (8 patients) or total knee arthroplasty (TKA) (4 patients). The secondary procedures were performed a mean of 102.7 months (range, 36-144 months) after the index surgeries. The secondary THA group had significantly elevated levels of cobalt ion at 36 and 48 months, chromium ion at 12 and 24 months, and titanium ion at 48 and 72 months. The TKA group had no significant differences in cobalt, chromium, or titanium ion levels up to 72 months after surgery. Overall, when metal-polyethylene THA was performed after primary THA, there was a trend toward elevated serum metal ion levels at all follow-up intervals. This trend should be investigated with larger clinical trials.

Assessment of epidural versus intradiscal biocompatibility of PEEK implant debris: an in vivo rabbit model.

PURPOSE: To understand the relative histopathological effects of PEEK particulate debris when applied within the epidural versus the intervertebral disc space. We hypothesized that due to the avascular nature of the intervertebral disc acting as a barrier to immune cells, the intradiscal response would be less than the epidural response. METHODS: The inflammatory effects of clinically relevant doses (3 mg/5-kg rabbit) and sizes (1.15 µm diameter) of PEEK implant debris were assed when placed dry on epidural and intradiscal tissues in an in vivo rabbit model. The size of the particulate was based on wear particulate analysis of wear debris generated from simulator wear testing of PEEK spinal disc arthroplasty devices. Local and systemic gross histology was evaluated at the 3- and 6-month time points. Quantitative immunohistochemistry of local tissues was used to quantify the common inflammatory mediators TNF-α, IL-1ß, and IL-6. RESULTS: Both treatments did not alter the normal appearance of the dura mater and vascular structures; however, limited epidural fibrosis was observed. Epidural challenge of PEEK particles resulted in a significant (30 %) increase (p < 0.007) in TNF-α and IL-1ß at both 3 and 6 months compared to that of controls, and IL-6 at 6 months (p < 0.0001). Intradiscal challenge of PEEK particles resulted in a significant increase in IL-1ß, IL-6 and TNF-α at 6-months post-challenge (p ≤ 0.03). However, overall there were only moderate increases in the relative amount of these cytokines when compared with surgical controls (10-20 %). In contrast, epidural challenge resulted in a 50-100 % increase. CONCLUSIONS: The results of this study are similar to past investigations of PEEK, whose results have not been shown to elicit an aggressive immune response. The degree to which these results will translate to the clinical environment remains to be established, but the pattern of subtle elevations in inflammatory cytokines indicated both a mild persistence of responses to PEEK debris, and that intradiscal implant debris will likely result in less inflammation than epidural implant debris.

Epidural application of spinal instrumentation particulate wear debris: a comprehensive evaluation of neurotoxicity using an in vivo animal model.

OBJECT: The introduction and utilization of motion-preserving implant systems for spinal reconstruction served as the impetus for this basic scientific investigation. The effect of unintended wear particulate debris resulting from micromotion at spinal implant interconnections and bearing surfaces remains a clinical concern. Using an in vivo rabbit model, the current study quantified the neural and systemic histopathological responses following epidural application of 11 different types of medical-grade particulate wear debris produced from spinal instrumentation. METHODS: A total of 120 New Zealand White rabbits were equally randomized into 12 groups based on implant treatment: 1) sham (control), 2) stainless steel, 3) titanium alloy, 4) cobalt chromium alloy, 5) ultra-high molecular weight polyethylene (UHMWPe), 6) ceramic, 7) polytetrafluoroethylene, 8) polycarbonate urethane, 9) silicone, 10) polyethylene terephthalate, 11) polyester, and 12) polyetheretherketone. The surgical procedure consisted of a midline posterior approach followed by resection of the L-6 spinous process and L5-6 ligamentum flavum, permitting interlaminar exposure of the dural sac. Four milligrams of the appropriate treatment material (Groups 2-12) was then implanted onto the dura in a dry, sterile format. All particles (average size range 0.1-50 µm in diameter) were verified to be endotoxin free prior to implantation. Five animals from each treatment group were sacrificed at 3 months and 5 were sacrificed at 6 months postoperatively. Postmortem analysis included epidural cultures and histopathological assessment of local and systemic tissue samples. Immunocytochemical analysis of the spinal cord and overlying epidural fibrosis quantified the extent of proinflammatory cytokines (tumor necrosis factor-α, tumor necrosis factor-ß, interleukin [IL]-1α, IL-1ß, and IL-6) and activated macrophages. RESULTS: Epidural cultures were negative for nearly all cases, and there was no evidence of particulate debris or significant histopathological changes in the systemic tissues. Gross histopathological examination demonstrated increased levels of epidural fibrosis in the experimental treatment groups compared with the control group. Histopathological evaluation of the epidural fibrous tissues showed evidence of a histiocytic reaction containing phagocytized inert particles and foci of local inflammatory reactions. At 3 months, immunohistochemical examination of the spinal cord and epidural tissues demonstrated upregulation of IL-6 in the groups in which metallic and UHMWPe debris were implanted (p < 0.05), while macrophage activity levels were greatest in the stainless-steel and UHMWPe groups (p < 0.05). By 6 months, the levels of activated cytokines and macrophages in nearly all experimental cases were downregulated and not significantly different from those of the operative controls (p > 0.05). The spinal cord had no evidence of lesions or neuropathology. However, multiple treatments in the metallic groups exhibited a mild, chronic macrophage response to particulate debris, which had diffused intrathecally. CONCLUSIONS: Epidural application of spinal instrumentation particulate wear debris elicits a chronic histiocytic reaction localized primarily within the epidural fibrosis. Particles have the capacity to diffuse intrathecally, eliciting a transient upregulation in macrophage/cytokine activity response within the epidural fibrosis. Overall, based on the time periods evaluated, there was no evidence of an acute neural or systemic histopathological response to the materials included in the current project.

Cobalt-alloy implant debris induce HIF-1α hypoxia associated responses: a mechanism for metal-specific orthopedic implant failure.

The historical success of orthopedic implants has been recently tempered by unexpected pathologies and early failures of some types of Cobalt-Chromium-Molybdenum alloy containing artificial hip implants. Hypoxia-associated responses to Cobalt-alloy metal debris were suspected as mediating this untoward reactivity at least in part. Hypoxia Inducible Factor-1α is a major transcription factor involved in hypoxia, and is a potent coping mechanism for cells to rapidly respond to changing metabolic demands. We measured signature hypoxia associated responses (i.e. HIF-1α, VEGF and TNF-α) to Cobalt-alloy implant debris both in vitro (using a human THP-1 macrophage cell line and primary human monocytes/macrophages) and in vivo. HIF-1α in peri-implant tissues of failed metal-on-metal implants were compared to similar tissues from people with metal-on-polymer hip arthroplasties, immunohistochemically. Increasing concentrations of cobalt ions significantly up-regulated HIF-1α with a maximal response at 0.3 mM. Cobalt-alloy particles (1 um-diameter, 10 particles/cell) induced significantly elevated HIF-1α, VEGF, TNF-α and ROS expression in human primary macrophages whereas Titanium-alloy particles did not. Elevated expression of HIF-1α was found in peri-implant tissues and synovial fluid of people with failing Metal-on-Metal hips (n = 5) compared to failed Metal-on-Polymer articulating hip arthroplasties (n = 10). This evidence suggests that Cobalt-alloy, more than other metal implant debris (e.g. Titanium alloy), can elicit hypoxia-like responses that if unchecked can lead to unusual peri-implant pathologies, such as lymphocyte infiltration, necrosis and excessive fibrous tissue growths.