Development of a facile fluorophosphonate-functionalised titanium surface for potential orthopaedic applications.

BACKGROUND: Aseptic loosening of total joint replacements (TJRs) continues to be the main cause of implant failures. The socioeconomic impact of surgical revisions is hugely significant; in the United Kingdom alone, it is estimated that £137 m is spent annually on revision arthroplasties. Enhancing the longevity of titanium implants will help reduce the incidence and overall cost of failed devices. METHODS: In realising the development of a superior titanium technology, we exploited the natural affinity of titanium for phosphonic acids and developed a facile means of coating the metal with (3S)1-fluoro-3-hydroxy-4-(oleoyloxy)butyl-1-phosphonate (FHBP), a phosphatase-resistant analogue of lysophosphatidic acid (LPA). Importantly LPA and selected LPA analogues like FHBP synergistically cooperate with calcitriol to promote human osteoblast formation and maturation. RESULTS: Herein, we provide evidence that simply immersing titanium in aqueous solutions of FHBP afforded a surface that was superior to unmodified metal at enhancing osteoblast maturation. Importantly, FHBP-functionalised titanium remained stable to 2 years of ambient storage, resisted ∼35 kGy of gamma irradiation and survived implantation into a bone substitute (Sawbone™) and irrigation. CONCLUSION: The facile step we have taken to modify titanium and the robustness of the final surface finish are appealing properties that are likely to attract the attention of implant manufacturers in the future. THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE: We have generated a functionalised titanium (Ti) surface by simply immersing Ti in aqueous solutions of a bioactive lipid. As a facile procedure it will have greater appeal to implant manufacturers compared to onerous and costly developmental processes.

Nanometre to micrometre length-scale techniques for characterising environmentally-assisted cracking: An appraisal.

The appraisal is strongly focussed on challenges associated with the nuclear sector, however these are representative of what is generally encountered by a range of engineering applications. Ensuring structural integrity of key nuclear plant components is essential for both safe and economic operation. Structural integrity assessments require knowledge of the mechanical and physical properties of materials, together with an understanding of mechanisms that can limit the overall operating life. With improved mechanistic understanding comes the ability to develop predictive models of the service life of components. Such models often require parameters which can be provided only by characterisation of processes occurring in situ over a range of scales, with the sub-micrometre-scale being particularly important, but also challenging. This appraisal reviews the techniques currently available to characterise microstructural features at the nanometre to micrometre length-scale that can be used to elucidate mechanisms that lead to the early stages of environmentally-assisted crack formation and subsequent growth. Following an appraisal of the techniques and their application, there is a short discussion and consideration for future opportunities.

Compositional and structural analysis of Fukushima-derived particulates using high-resolution x-ray imaging and synchrotron characterisation techniques.

Both the three-dimensional internal structure and elemental distribution of near-field radioactive fallout particulate material released during the March 2011 accident at the Fukushima Daiichi Nuclear Power Plant is analysed using combined high-resolution laboratory and synchrotron radiation x-ray techniques. Results from this study allow for the proposition of the likely formation mechanism of the particles, as well as the potential risks associated with their existence in the environment, and the likely implications for future planned reactor decommissioning. A suite of particles is analyzed from a locality 2 km from the north-western perimeter of the site - north of the primary contaminant plume in an area formerly attributed to being contaminated by fallout from reactor Unit 1. The particles are shown to exhibit significant structural similarities; being amorphous with a textured exterior, and containing inclusions of contrasting compositions, as well as an extensive internal void volume - bimodal in its size distribution. A heterogeneous distribution of the various elemental constituents is observed inside a representative particle, which also exhibited a Fukushima-derived radiocesium (134Cs, 135Cs and 137Cs) signature with negligible natural Cs. We consider the structure and composition of the particle to suggest it formed from materials associated with the reactor Unit 1 building explosion, with debris fragments embedded into the particles surface. Such a high void ratio, comparable to geological pumice, suggests such material formed during a rapid depressurisation and is potentially susceptible to fragmentation through attrition.

Provenance of uranium particulate contained within Fukushima Daiichi Nuclear Power Plant Unit 1 ejecta material.

Here we report the results of multiple analytical techniques on sub-mm particulate material derived from Unit 1 of the Fukushima Daiichi Nuclear Power Plant to provide a better understanding of the events that occurred and the environmental legacy. Through combined x-ray fluorescence and absorption contrast micro-focused x-ray tomography, entrapped U particulate are observed to exist around the exterior circumference of the highly porous Si-based particle. Further synchrotron radiation analysis of a number of these entrapped particles shows them to exist as UO2-identical to reactor fuel, with confirmation of their nuclear origin shown via mass spectrometry analysis. While unlikely to represent an environmental or health hazard, such assertions would likely change should break-up of the Si-containing bulk particle occur. However, more important to the long-term decommissioning of the reactors at the FDNPP (and environmental clean-upon), is the knowledge that core integrity of reactor Unit 1 was compromised with nuclear material existing outside of the reactors primary containment.

Chitin and carbon nanotube composites as biocompatible scaffolds for neuron growth.

The design of biocompatible implants for neuron repair/regeneration ideally requires high cell adhesion as well as good electrical conductivity. Here, we have shown that plasma-treated chitin carbon nanotube composite scaffolds show very good neuron adhesion as well as support of synaptic function of neurons. The addition of carbon nanotubes to a chitin biopolymer improved the electrical conductivity and the assisted oxygen plasma treatment introduced more oxygen species onto the chitin nanotube scaffold surface. Neuron viability experiments showed excellent neuron attachment onto plasma-treated chitin nanotube composite scaffolds. The support of synaptic function was evident on chitin/nanotube composites, as confirmed by PSD-95 staining. The biocompatible and electrically-conducting chitin nanotube composite scaffold prepared in this study can be used for in vitro tissue engineering of neurons and, potentially, as an implantable electrode for stimulation and repair of neurons.

Investigating the role of microbes in mineral weathering: nanometre-scale characterisation of the cell-mineral interface using FIB and TEM.

Focused ion beam (FIB) sample preparation in combination with subsequent transmission electron microscopy (TEM) analysis are powerful tools for nanometre-scale examination of the cell-mineral interface in bio-geological samples. In this study, we used FIB-TEM to investigate the interaction between a cyanobacterium (Hassallia byssoidea) and a common sheet silicate mineral (biotite) following a laboratory-based bioweathering, incubation experiment. We discuss the FIB preparation of cross-sections of the cell mineral interface for TEM investigation. We also establish an electron fluence threshold (at 200keV) in biotite for the transition from scanning (S)TEM electron beam induced contamination build up on the surface of biotite thin sections to mass loss, or hole-drilling within the sections. Working below this threshold fluence nanometre-scale structural and elemental information has been obtained from biotite directly underneath cyanobacterial cells incubated on the biotite for 3 months. No physical alteration of the biotite was detected by TEM imaging and diffraction with little or no elemental alteration detected by STEM-energy dispersive X-ray (EDX) elemental line-scanning or by energy filtered TEM (EF-TEM) jump ratio elemental mapping. As such we present evidence that the cyanobacterial strain of H. byssoidea did not cause any measurable alteration of biotite, within the resolution limits of the analysis techniques used, after 3 months of incubation on its surface.

Banana peel: a green and economical sorbent for the selective removal of Cr(VI) from industrial wastewater.

This study describes the use of banana peel, a commonly produced fruit waste, for the removal of Cr(VI) from industrial wastewater. The parameters pH, contact time, initial metal ion concentration, and temperature were investigated and the conditions resulting in rapid and efficient adsorption (95% within 10 min) were determined. The binding of metal ions was found to be pH dependent with the optimal sorption occurring at pH 2. The retained species were eluted with 5 mL of 2M H(2)SO(4). To elucidate the mechanism of the process, total amounts of chromium and Cr(VI) were analyzed using flame atomic absorption and ultraviolet-visible (UV-vis) spectroscopic techniques, respectively. The Langmuir and Dubinin-Radushkevich (D-R) isotherms were used to describe the partitioning behavior for the system at different temperatures. Kinetics and thermodynamics of Cr(VI) removal by banana peel were also studied. The influence of diverse ions on the sorption behavior revealed that only Fe(II) ions (of those tested) suppressed the sorption of Cr(VI) ions to some extent. The method was applied for the removal of Cr(VI) from industrial wastewater.

Evaluation of sorption of uranium onto metakaolin using X-ray photoelectron and Raman spectroscopies.

Metakaolin prepared from a natural clay mineral ore of aluminium kaolinite is a promising low cost and high activity aluminosilicate material that has been investigated for studying the sorption behavior of uranium. Here, metakaolin was characterized using X-ray photoelectron spectroscopy (XPS) and the effects of pH, contact time and initial metal ion concentration on its sorption behavior were studied. The sorption process was found to initially be rapid (approximately 60% at time 0 min) but became slower with time; equilibrium was established within 24 h (approximately 80% sorption). The data were applied to study the kinetics of the sorption process. The Langmuir and Dubinin-Radushkevich (D-R) sorption isotherms were used to describe partitioning behavior for the system at room temperature. The binding of metal ions was found to be pH dependent, with optimal sorption occurring at pH 5. The retained metal ions were eluted with 5 mL of 0.1 M HNO(3). Raman spectroscopy and XPS were used to evaluate the sorption mechanism of U(VI).