Feasibility study of large-scale production of iodine-125 at the high temperature engineering test reactor.

The feasibility of a large-scale iodine-125 production from natural xenon gas at high-temperature gas-cooled reactors (HTGRs) was investigated. A high-temperature engineering test reactor (HTTR), which is located in Japan at Oarai-machi Research and Development Center, was used as a reference HTGR reactor in this study. First, a computer code based on a Runge-Kutta method was developed to calculate the quantities of isotopes arising from the neutron irradiation of natural xenon gas target. This code was verified with a good agreement with a reference result. Next, optimization of irradiation planning was carried out. As results, with 4 days of irradiation and 8 days of decay, the 125I production could be maximized and the 126I contamination was within an acceptable level. The preliminary design of irradiation channels at the HTTR was also optimized. The case with 3 irradiation channels and 20-cm diameter was determined as the optimal design, which could produce approximately 1.8 × 105GBq/y of 125I production.

Proposal of a neutron transmutation doping facility for n-type spherical silicon solar cell at high-temperature engineering test reactor.

The p-type spherical silicon solar cell is a candidate for future solar energy with low fabrication cost, however, its conversion efficiency is only about 10%. The conversion efficiency of a silicon solar cell can be increased by using n-type silicon semiconductor as a substrate. This study proposed a new method of neutron transmutation doping silicon (NTD-Si) for producing the n-type spherical solar cell, in which the Si-particles are irradiated directly instead of the cylinder Si-ingot as in the conventional NTD-Si. By using a 'screw', an identical resistivity could be achieved for the Si-particles without a complicated procedure as in the NTD with Si-ingot. Also, the reactivity and neutron flux swing could be kept to a minimum because of the continuous irradiation of the Si-particles. A high temperature engineering test reactor (HTTR), which is located in Japan, was used as a reference reactor in this study. Neutronic calculations showed that the HTTR has a capability to produce about 40t/EFPY of 10Ωcm resistivity Si-particles for fabrication of the n-type spherical solar cell.