Enabling wide temperature battery operation with hybrid lithium electrolytes.

We demonstrate that an ionic liquid 1-ethyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide combined with propylene carbonate and lithium bis(trifluoromethanesulfonyl)imide yields a hybrid electrolyte that enables a wide operational temperature window (-20 °C to 60 °C). When integrated into a lithium titanate‖lithium cobalt oxide full-cell configuration, high-rate capability is achieved at -20 °C with >40% retention at a C/2 cycling rate, and negligible capacity fade is observed during rate capability tests and long-term cycling at 60 °C.

3D Asymmetric Bilayer Garnet-Hybridized High-Energy-Density Lithium-Sulfur Batteries.

Lithium garnet Li7La3Zr2O12 (LLZO), with high ionic conductivity and chemical stability against a Li metal anode, is considered one of the most promising solid electrolytes for lithium-sulfur batteries. However, an infinite charge time resulting in low capacity has been observed in Li-S cells using Ta-doped LLZO (Ta-LLZO) as a solid electrolyte. It was observed that this cell failure is correlated with lanthanum segregation to the surface of Ta-LLZO that reacts with a sulfur cathode. We demonstrated this correlation by using lanthanum excess and lanthanum deficient Ta-LLZO as the solid electrolyte in Li-S cells. To resolve this challenge, we physically separated the sulfur cathode and LLZO using a poly(ethylene oxide) (PEO)-based buffer interlayer. With a thin bilayer of LLZO and the stabilized sulfur cathode/LLZO interface, the hybridized Li-S batteries achieved a high initial discharge capacity of 1307 mA h/g corresponding to an energy density of 639 W h/L and 134 W h/kg under a high current density of 0.2 mA/cm2 at room temperature without any indication of a polysulfide shuttle. By simply reducing the LLZO dense layer thickness to 10 µm as we have demonstrated before, a significantly higher energy density of 1308 W h/L and 257 W h/kg is achievable. X-ray diffraction and X-ray photoelectron spectroscopy indicate that the PEO-based interlayer, which physically separates the sulfur cathode and LLZO, is both chemically and electrochemically stable with LLZO. In addition, the PEO-based interlayer can adapt to the stress/strain associated with sulfur volume expansion during lithiation.

Amorphous-Carbon-Coated 3D Solid Electrolyte for an Electro-Chemomechanically Stable Lithium Metal Anode in Solid-State Batteries.

The use of solid-state electrolyte may be necessary to enable safe, high-energy-density Li metal anodes for next-generation energy storage systems. However, the inhomogeneous local current densities during long-term cycling result in instability and detachment of the Li anode from the electrolyte, which greatly hinders practical application. In this study, we report a new approach to maintain a stable Li metal | electrolyte interface by depositing an amorphous carbon nanocoating on garnet-type solid-state electrolyte. The carbon nanocoating provides both electron and ion conducting capability, which helps to homogenize the lithium metal stripping and plating processes. After coating, we find the Li metal/garnet interface displays stable cycling at 3 mA/cm2 for more than 500 h, demonstrating the interface's outstanding electro-chemomechanical stability. This work suggests amorphous carbon coatings may be a promising strategy for achieving stable Li metal | electrolyte interfaces and reliable Li metal batteries.

Probing the Mechanical Properties of a Doped Li7La3Zr2O12 Garnet Thin Electrolyte for Solid-State Batteries.

Using the nanoindentation technique, we probed the mechanical properties of tape cast and sintered thin doped Li7La3Zr2O12 garnet electrolytes. For comparison, a bulk garnet sample fabricated by die pressing and sintering was also studied. The results indicate that the thin sample has a significantly higher elastic modulus (∼155 GPa), hardness (∼11 GPa), and indentation fracture toughness (∼1.12 ± 0.12 MPa·m1/2) than the bulk sample (∼142 GPa, ∼10 GPa, and ∼0.97 ± 0.10 MPa·m1/2, respectively). The above results demonstrate that the thin sample can more effectively prevent lithium dendrite penetration due to its better mechanical properties. Deformation and creep behavior analysis further indicates that the thin sample (1) has a higher resistance to withhold the charge/discharge stress and consequently deformation and (2) a lower creep exponent and likely high resistance to brittle failure.

Three-Dimensional, Solid-State Mixed Electron-Ion Conductive Framework for Lithium Metal Anode.

Solid-state electrolytes (SSEs) have been widely considered as enabling materials for the practical application of lithium metal anodes. However, many problems inhibit the widespread application of solid state batteries, including the growth of lithium dendrites, high interfacial resistance, and the inability to operate at high current density. In this study, we report a three-dimensional (3D) mixed electron/ion conducting framework (3D-MCF) based on a porous-dense-porous trilayer garnet electrolyte structure created via tape casting to facilitate the use of a 3D solid state lithium metal anode. The 3D-MCF was achieved by a conformal coating of carbon nanotubes (CNTs) on the porous garnet structure, creating a composite mixed electron/ion conductor that acts as a 3D host for the lithium metal. The lithium metal was introduced into the 3D-MCF via slow electrochemical deposition, forming a 3D lithium metal anode. The slow lithiation leads to improved contact between the lithium metal anode and garnet electrolyte, resulting in a low resistance of 25 Ω cm2. Additionally, due to the continuous CNT coating and its seamless contact with the garnet we observed highly uniform lithium deposition behavior in the porous garnet structure. With the same local current density, the high surface area of the porous garnet framework leads to a higher overall areal current density for stable lithium deposition. An elevated current density of 1 mA/cm2 based on the geometric area of the cell was demonstrated for continuous lithium cycling in symmetric lithium cells. For battery operation of the trilayer structure, the lithium can be cycled between the 3D-MCF on one side and the cathode infused into the porous structure on the opposite side. The 3D-MCF created by the porous garnet structure and conformal CNT coating provides a promising direction toward new designs in solid-state lithium metal batteries.

3D-Printing Electrolytes for Solid-State Batteries.

Solid-state batteries have many enticing advantages in terms of safety and stability, but the solid electrolytes upon which these batteries are based typically lead to high cell resistance. Both components of the resistance (interfacial, due to poor contact with electrolytes, and bulk, due to a thick electrolyte) are a result of the rudimentary manufacturing capabilities that exist for solid-state electrolytes. In general, solid electrolytes are studied as flat pellets with planar interfaces, which minimizes interfacial contact area. Here, multiple ink formulations are developed that enable 3D printing of unique solid electrolyte microstructures with varying properties. These inks are used to 3D-print a variety of patterns, which are then sintered to reveal thin, nonplanar, intricate architectures composed only of Li7 La3 Zr2 O12 solid electrolyte. Using these 3D-printing ink formulations to further study and optimize electrolyte structure could lead to solid-state batteries with dramatically lower full cell resistance and higher energy and power density. In addition, the reported ink compositions could be used as a model recipe for other solid electrolyte or ceramic inks, perhaps enabling 3D printing in related fields.

Continuous plating/stripping behavior of solid-state lithium metal anode in a 3D ion-conductive framework.

The increasing demands for efficient and clean energy-storage systems have spurred the development of Li metal batteries, which possess attractively high energy densities. For practical application of Li metal batteries, it is vital to resolve the intrinsic problems of Li metal anodes, i.e., the formation of Li dendrites, interfacial instability, and huge volume changes during cycling. Utilization of solid-state electrolytes for Li metal anodes is a promising approach to address those issues. In this study, we use a 3D garnet-type ion-conductive framework as a host for the Li metal anode and study the plating and stripping behaviors of the Li metal anode within the solid ion-conductive host. We show that with a solid-state ion-conductive framework and a planar current collector at the bottom, Li is plated from the bottom and rises during deposition, away from the separator layer and free from electrolyte penetration and short circuit. Owing to the solid-state deposition property, Li grows smoothly in the pores of the garnet host without forming Li dendrites. The dendrite-free deposition and continuous rise/fall of Li metal during plating/stripping in the 3D ion-conductive host promise a safe and durable Li metal anode. The solid-state Li anode shows stable cycling at 0.5 mA cm-2 for 300 h with a small overpotential, showing a significant improvement compared with reported Li anodes with ceramic electrolytes. By fundamentally eliminating the dendrite issue, the solid Li metal anode shows a great potential to build safe and reliable Li metal batteries.