Aloe vera/Chitosan-Based Edible Film with Enhanced Antioxidant, Antimicrobial, Thermal, and Barrier Properties for Sustainable Food Preservation.

Food bioactive packaging has received increasing attention from consumers and the food industry for its potential to reduce food waste and environmental issues. Several materials can be used to produce edible films/coats; however, bio-based, cost-effective, and sustainable coatings have gained a high reputation these days. For instance, Aloe vera gel (AV) is a promising bio-based material for edible coatings and films; therefore, the present study aimed to investigate the film-forming abilities of AV and Chitosan (CH) combination as a potential active food packaging material. The physicochemical and mechanical characteristics of formed films of various combinations were prepared at different concentrations, i.e., CH (0.5% w/v), AV (100%), CH:AV (75:25), and CH:AV (60:40). The results showed significant differences among all the prepared edible films wherein these differences were mainly on account of incorporating AV gel. The rheological and antioxidant properties of the formulations improved with the inclusion of AV gel. The films composed of CH:AV (60:40) positively affected the water solubility, thermal properties, and water vapour permeability of the edible films. The X-ray Diffraction (XRD) and Scanning electron microscopy (SEM) results showed that the films composed of CH:AV, (60:40) were amorphous and had smooth morphology. Further, the edible film solutions were applied to fresh figs (Ficus carica) to investigate their role in preserving fruits during storage. A significant reduction in microbial growth was found in coated fruits after 28 days of cold storage. The films composed of CH and AV showed overall improved results compared to the CH (0.5%, w/v). Therefore, the used formulations (CH:AV, 60:40) can form a sustainable film that has the potential to be utilized for fresh product preservation to maintain its quality and shelf life.

Properties of low-fat Cheddar cheese prepared from bovine-camel milk blends: Chemical composition, microstructure, rheology, and volatile compounds.

Making cheese from camel milk (CM) presents various challenges due to its different physicochemical properties compared with bovine milk (BM). In this study, we investigated the chemical composition, proteolysis, meltability, oiling off, texture profile, color, microstructure, and rheological properties of low-fat Cheddar cheese (LFCC) prepared from BM-CM blends. LFCC was produced from BM or BM supplemented with 15% CM (CM15) and 30% CM (CM30), and analyzed after 14, 60, 120, and 180 d of ripening at 8°C. Except for salt content, no significant differences were observed among LFCC from BM, CM15, and CM30. The addition of CM increased the meltability and oiling off in the resulting cheese throughout storage. With respect to color properties, after melting, LFCC CM30 showed lower L* values than LFCC made from BM and CM15, and a* and b* values were higher than those of BM and CM15 samples. LFCC from CM30 also exhibited lower hardness compared with the other cheeses. Moreover, LFCC made from BM showed a rough granular surface, but cheese samples made from BM-CM blends exhibited a smooth surface. The rheological parameters, including storage modulus, loss modulus, and loss tangent, varied among cheese treatments. The determined acetoin and short-chain volatile acids (C2-C6) in LFCC were affected by the use of CM, because CM15 showed significantly higher amounts than BM and CM30, respectively. The detailed interactions between BM and CM in the cheese matrix should be further investigated.

Structural characterization, biofunctionality, and environmental factors impacting rheological properties of exopolysaccharide produced by probiotic Lactococcus lactis C15.

Exopolysaccharides (EPSs) possess distinctive rheological and physicochemical properties and innovative functionality. This study aimed to investigate the physicochemical, bioactive, and rheological properties of an EPS secreted by Lactococcus lactis subsp. lactis C15. EPS-C15 was found to have an average molecular weight of 8.8 × 105 Da and was identified as a hetero-EPS composed of arabinose, xylose, mannose, and glucose with a molar ratio of 2.0:2.7:1.0:21.3, respectively. The particle size and zeta potential represented 311.2 nm and - 12.44 mV, respectively. FITR exhibited that EPS-C15 possessed a typical polysaccharide structure. NMR displayed that EPS-C15 structure is → 3)α-d-Glcvi (1 → 3)α-d-Xylv (1 → 6)α-d-Glciv(1 → 4)α-d-Glc(1 → 3)ß-d-Man(1 → 2)α-d-Glci(1 → . EPS-C15 scavenged DPPH and ABTS free radicals with 50.3% and 46.4% capacities, respectively. Results show that the antiproliferative activities of EPS-C15 revealed inhibitions of 49.7% and 88.1% against MCF-7 and Caco-2 cells, respectively. EPS-C15 has antibacterial properties that inhibited Staphylococcus aureus (29.45%), Salmonella typhimurium (29.83%), Listeria monocytogenes (30.33%), and E. coli O157:H7 (33.57%). The viscosity of EPS-C15 decreased as the shear rate increased. The rheological properties of the EPS-C15 were affected by changes in pH levels and the addition of salts. EPS-C15 is a promising biomaterial that has potential applications in various industries, such as food, pharmaceuticals, and healthcare.

Low-moisture part-skim mozzarella cheese made from blends of camel and bovine milk: Gross composition, proteolysis, functionality, microstructure, and rheological properties.

Camel (CM) milk is used in variety of ways; however, it has inferior gelling properties compared with bovine milk (BM). In this study, we aimed to investigate the physicochemical, functional, microstructural, and rheological properties of low-moisture part-skim (LMPS) mozzarella cheese, made from BM, or BM mixed with 15% CM (CM15%) or 30% CM (CM30%), at various time points (up to 60 d) of storage at 4°C after manufacture. Low-moisture part-skim mozzarella cheeses using CM15% and CM30% had high moisture and total Ca contents, but lower soluble Ca content. Compared with BM cheese, CM15% and CM30% LMPS mozzarella cheese exhibited higher proteolysis rates during storage. Adding CM affected the color properties of LMPS mozzarella cheese manufactured from mixed milk. Scanning electron microscopy images showed that the microstructure of CM15% and CM30% cheeses had smooth surfaces, whereas the BM cheese microstructures were rough with granulated surfaces. Low-moisture part-skim mozzarella cheeses using CM15% and CM30% showed significantly lower hardness and chewiness, but higher stringiness than BM cheese. Compared with BM cheese, CM15% and CM30% cheeses showed lower tan δ levels during temperature surges, suggesting that the addition of CM increased the meltability of LMPS mozzarella cheese during temperature increases. Camel milk addition affected the physicochemical, microstructural, and rheological properties of LMPS mozzarella cheese.

Melanin is a plenteous bioactive phenolic compound in date fruits (Phoenix dactylifera L.).

Date palm fruits (Phoenix dactylifera L.) were found to contain high levels of allomelanin (1.2-5.1%). The melanin is localized in the tanniferous cells between the inner and outer mesocarp tissues of the fruit. The melanin, extracted with 2 M sodium hydroxide, consisted of amorphous graphene-like granular structures of irregular shape and variable size. The date fruit melanin mainly comprises carbon (64.6%) and oxygen (30.6) but no nitrogen, and was thermally stable. It has radical scavenging (63.6-75.1 IC50, µg/mL), antimicrobial (250-1000 µg/mL), hypoglycemic (51.8-58.2%), and angiotensin-converting-enzyme inhibitory (65.8%) effects. The high level of melanin in date fruits highlights the importance of investigating its dietary intake and its impact on nutrition. This study also suggests that date fruit melanin can be a functional ingredient in foods, food packages, pharmaceuticals, and cosmetics.

Low-fat akawi cheese made from bovine-camel milk blends: Rheological properties and microstructural characteristics.

Camel milk (CM) can be used as an ingredient to produce various dairy products but it forms weak rennet-induced and acid-induced gels compared with bovine milk (BM). Therefore, in this study, we aimed to investigate the effect of blending bovine milk with camel milk on the physicochemical, rheological (amplitude sweep and frequency sweep), and microstructural properties of low-fat akawi (LFA) cheese. The cheeses were made of BM only or BM blended with 15% (CM15%) or 30% (CM30%) camel milk and stored at 4°C for 28 d. The viscoelastic properties as a function of temperature were assessed. The LFA cheeses made from blended milks had higher moisture, total Ca, and soluble Ca contents, and had higher pH 4.6-water-soluble nitrogen compared with those made from BM. Analysis by scanning electron microscopy demonstrated that the microstructures formed in BM cheese were rough with granular surfaces, whereas those in blended milk cheeses had smooth surfaces. Hardness was lower for LFA cheeses made from blended milk than for those made from BM only. The LFA cheeses demonstrated viscoelastic behavior in a linear viscoelastic range from 0.1 to 1.0% strain. The storage modulus (G') was lower in LFA cheese made from BM over a range of frequencies. Adding CM reduced the resistance of LFA cheeses to flow as temperature increased. Blended cheeses exhibited lower complex viscosity values than BM cheeses during temperature increases. Thus, the addition of camel milk improved the rheological properties of LFA cheese.

Molecular, Structural, and Rheological Characterization of Camel Skin Gelatin Extracted Using Different Pretreatment Conditions.

Optimum conditions for high-quality gelatin recovery from camel skin and its molecular, structural, and rheological characterization were carried out in this study. Increased yield and gel strength were recorded, with an increase in camel skin pretreatment times of 6 to 42 h and 0.50 and 0.75 M-NaOH. Gelatin from skin pretreated with 0.75 and 0.5 M-NaOH for 42 h showed the highest yield (22.60%) and gel strength (365.5 g), respectively. Structural characterization by Fourier transformation infrared spectra, X-ray diffraction, and nuclear magnetic resonance indicated that all gelatins possessed major peaks in the amide region, and diffraction peaks around 22° were basically amorphous. The temperatures for gelling and melting ranged from 20.9 °C to 25.8 °C and 27.34 °C to 30.49 °C. Microstructure revealed loose network with more voids in gelatin from skin pretreated with 0.5 and 0.75 M-NaOH for 6 h, while a highly cross-linked network and less voids were observed in those pretreated with 0.75 M-NaOH for 24 h and 0.5 M-NaOH for 42 h. The results reveal that great potential exists in producing halal gelatin with excellent quality and functionality from camel skin.

Effects of Pasteurization and High-Pressure Processing of Camel and Bovine Cheese Quality, and Proteolysis Contribution to Camel Cheese Softness.

The effects of high-pressure processing (HPP) compared to thermal treatments on the quality of camel vs. bovine cheeses were studied. The study showed that camel milk has a lower microbial load compared to bovine milk, which is maintained during 7 days' storage of the processed milk. The effect of three HPP treatments (350, 450, and 550 MPa for 5 min at 4°C) and two pasteurization treatments (65°C for 30 min and 75°C for 30 s) on the quality of soft unripened camel and bovine milk cheeses were accessed. The cheeses were evaluated for pH, yield, proximate composition, textural and rheological properties, microstructure, and protein profile by SDS-PAGE electrophoresis. The effects of the treatments on cheese's hardness were different between the camel and bovine cheeses; while heat treatment at 65°C for 30 min gave the hardest bovine milk cheese (1,253 ± 20), HPP treatment at 350 MPa for 5 min gave the highest value for camel milk cheese (519 ± 5) (p < 0.05). The hardness of the cheeses was associated with low yield and moisture content. SDS-PAGE electrophoresis revealed that extensive proteolysis might have contributed to the softness of camel cheeses compared to bovine and suggested the involvement of some residual enzyme activities.

Short communication: The effect of pectin and sodium alginate on labans made from camel milk and bovine milk.

Camel milk (CM) is gaining scientific attention due to its potential health and therapeutic benefits. Fermented drinkable yogurts (labans) were prepared from CM and bovine milk (BM) using mixed Streptococcus thermophilus and Lactobacillus delbrueckii ssp. bulgaricus bacteria supplemented with 1 of 2 hydrocolloids: pectin (0.1-0.3%) or sodium alginate (0.1-0.5%). The different labans were compared by studying their acidity and rheology as well as their structural and sensory properties. The CM and BM labans had titratable acidity values that ranged from 0.85 to 1.27 and 0.61 to 0.93%, respectively. Pectin at 0.2% enhanced the rheological properties of BM labans, but had no effect in CM labans. Sodium alginate at 0.3% and 0.5% increased viscosity, elastic or storage modulus (G'), and viscous or loss modulus (G″) values for both types of laban. Scanning electron microscopy indicated that the CM laban contained lower levels of "spike-like structures" than BM laban, and that the addition of hydrocolloids improved this effect. Quantitative descriptive sensory analysis showed that CM labans fortified with either 0.2% pectin or 0.3% sodium alginate were comparable to commercial BM laban in viscous mouthfeel. Fortified CM labans were more acidic and had stronger flavors than unfortified samples. Overall, this study demonstrated that the addition of sodium alginate or pectin at intermediate levels permits production of palatable CM labans of a satisfactory viscous consistency.

Dietary fiber components, microstructure, and texture of date fruits (Phoenix dactylifera, L.).

Date fruits vary widely in the hardness of their edible parts and they are classified accordingly into soft, semi-dry, and dry varieties. Fruit texture, a significant parameter in determining consumer acceptance, is related to the tissue structure and chemical composition of the fruit, mainly the ratio of sucrose to reducing sugars. This study aimed to understand the relationship between the chemical composition, microstructure, and texture profile of 10 major Emirati date fruits. The soluble sugars, glucose and fructose, represent ca 80 g/100 g of the fruits on the basis of dry weight (DW) while the dietary fiber contents varied 5.2-7.4 g/100 dg D.W. with lignin being the main determinant of the variability. The textures of the samples were studied using instrumental texture profile analysis. While no correlation was found between the soluble sugar and texture parameters in this study, the different fiber constituents correlated variably with the different parameters of date fruit texture. Lignin, arabinoxylan, galactomannan, and pectin were found to correlate significantly with fruit hardness and the related parameters, gumminess and chewiness. Both lignin and arabinoxylan correlated with resilience, and arabinoxylan exhibited a strong correlation with cohesiveness.

Microscopic Investigationsof Silicification and Lignification Suggest Their Coexistence in Tracheary Phytoliths in Date Fruits (Phoenix dactylifera L.).

Date fruits are special representative of hard fruits and one of the richest sources of dietary silica and edible lignin, which are believed to have several health benefits. In this study, we used optical and scanning electron microscopy (SEM) to investigate the presence of associations between silicification and lignification in date fruits (Phoenix dactylifera, L.). Phloroglucinol staining was employed to observe lignification in date fruits, while silicification was studied by SEM of whole fruits and their acid digesta. This work revealed the presence of heterogeneity and complexity in the silica phytoliths and the lignified structures in date fruits. It was found that lignin exists independently of silica in the secondary cell walls of parenchymal and sclereid cells and that silica exists independently of lignin in the spheroid phytoliths that surround the sclereid cells. Interestingly, a small proportion of lignin and silica seemed to co-exist as partners in the spiral coils of the tracheid phytoliths.

Exopolysaccharide produced by the potential probiotic Lactococcus garvieae C47: Structural characteristics, rheological properties, bioactivities and impact on fermented camel milk.

Fermented camel milk possesses a weak (liquid-like) gel structure. We aimed to 1) investigate the characteristics, bioactivities and rheological properties of the exopolysaccharide (EPS) produced by Lactococcus garvieae-C47 (exopolysaccharide-C47 product), a potential probiotic bacterium, on milk extracted from camels and 2) examine the rheological properties of the fermented camel milk produced by L. garvieae-C47. Exopolysaccharide-C47 product (molecular weight: 7.3 × 106 Da) was composed of the following monosaccharides: glucose (82.51%), arabinose (5.32%) and xylose (12.17%). The antioxidant, antitumor and α-amylase inhibitory activities of exopolysaccharide-C47 product reached up to 67.52, 59.35 and 91.0%, respectively. The apparent viscosity of exopolysaccharide-C47 product decreased with the increase in shear rate and declined by increasing the temperature up to 50 °C. The rheological properties of exopolysaccharide-C47 product are influenced by the salt type and pH value. The exopolysaccharide product produced by L. garvieae C47 possesses valuable health benefits and has the ability to improve the weak structure of fermented camel milk.

Characterization, bioactivities, and rheological properties of exopolysaccharide produced by novel probiotic Lactobacillus plantarum C70 isolated from camel milk.

Various industries highly regard the functionalities and bioactivities of bacterial polysaccharides. We aimed to characterize the exopolysaccharide (EPS) produced by novel probiotic Lactobacillus plantarum C70 (accession number KX881779) isolated from camel milk and to investigate its bioactivities and rheological properties. EPS-C70 had a weight-average molecular weight (Mw) of 3.8 × 105 Da. Arabinose (13.3%), mannose (7.1%), glucose (74.6%), and galactose (5.0%) were the major monosaccharides constituents. EPS-C70 had two endothermic peaks at 76.95 °C and 158.76 °C corresponding to glass transition (Tg) and melting point (Tm), respectively. Zeta potential and particle size of EPS-C70 were -330.71 mV and 525.5 nm, respectively. DPPH and ABTS of EPS-C70 were 75.91% and 49.42% at 10 mg/mL concentration, respectively. The cytotoxic activities against colon cancer and breast cancer lines were 88.1% and 73.1% at concentration 10 mg/mL, respectively. EPS-C70 exhibited shear-thinning behaviour. Salts and pH values had a significant impact on the rheological properties of EPS-C70.

Nano-encapsulation of catechin in starch nanoparticles: Characterization, release behavior and bioactivity retention during simulated in-vitro digestion.

Novel starch-based nanoparticles from three sources: horse chestnut (HSC), water chestnut (WSC) and lotus stem (LSC) were prepared for nano-encapsulation of catechin. Average particle size of HSC, WSC and LSC based nano-particles were 322.7, 559.2 and 615.6 nm with encapsulation efficiency of 59.09, 48.30, and 55.00% and negative zeta potential of -18.05, -21.5 and -18.05 mv, respectively. Structural, physical and thermal properties were characterized by fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD) and differential scanning calorimetry (DSC). SEM revealed capsule formation with entrapped catechin, while broad characteristic peaks at 3475, 1650, 1383, 1148, 1083 and 790 cm-1 depicts encapsulation of catechin in starch nanoparticles without any evident interaction. XRD showed loss of crystallinity after encapsulation. Higher content of catechin in intestinal juice ensured controlled release in intestine. Bioactive properties were retained at higher level in encapsulated catechin compared to free catechin upon in-vitro digestion.

Positive and Negative Temperature Dependence in the Resistivity of Crystallized Zr-Fe-Ni Metallic Glasses.

Ni0.25Fe0.75Zr3 metallic glassy ribbons were annealed in evacuated quartz ampoules beyond the crystallization temperatures (Tx ~655 K) over the range 773 to 1,173 K for varying periods of time. The resistivity of samples annealed over the temperature range 923 to 1,073 K for periods less than four hours increased as a function of decreasing temperature, while it decreased for samples annealed for more than four hours or at temperatures below 923 K or above 1,073 K for any period of time. All the annealed samples were found to contain only Ni, Fe and Zr from energy dispersive X-ray (EDX) analyses.