Fluorescence measurements of peroxynitrite/peroxynitrous acid in cold air plasma treated aqueous solutions.

Qualitative detection of peroxynitrite/peroxynitrous acid (ONOO-/ONOOH) as one of the key bactericidal agents produced in cold air plasma activated aqueous solutions is presented. We examined the use of the 2,7-dichlorodihydrofluorescein diacetate (H2DCFDA) fluorescent dye to detect ONOO-/ONOOH in plasma activated non-buffered water (PAW) or buffered solution (PAPB) generated by DC-driven self-pulsed transient spark discharge at atmospheric pressure in ambient air. The diagnostic selectivity of H2DCFDA to reactive oxygen and nitrogen species (RONS) typical of plasma activated aqueous solutions was examined by using various scavengers of RONS. This cross-reactivity study showed the highest sensitivity of the H2DCFDA dye to ONOO-/ONOOH. However, besides ONOO-/ONOOH, H2DCFDA also exhibited sensitivity to hypochlorite anions/hypochlorous acid (OCl-/HOCl), showing that for a selective study it is important to have an idea about the possible constituents in the studied solutions. The sensitivity of H2DCFDA to other RONS even in much higher concentrations was negligible. The presence of nitrites (NO2-) and hydrogen peroxide (H2O2) in PAW led predominantly to the production of peroxynitrous acid with a strong fluorescence response of H2DCFDA in PAW. Plasma treatment of buffered solutions led to the weak response of H2DCFDA. The fluorescence induced in PAW decreased after scavenging individual reactants, namely NO2- and H2O2, as well as by scavenging the product of the peroxynitrite forming reaction, proving that the fluorescence response of H2DCFDA is primarily due to the formation of ONOO-/ONOOH. A chemical kinetics analysis of post-discharge processes and the pseudo-second order reaction between H2O2 and NO2- confirms formation of peroxynitrous acid in PAW with a rate in the order of tens of nM per second. The post-discharge evolution of the ONOOH formation rate was clearly correlated with the parallel detection of ONOO-/ONOOH by fluorescence spectroscopy using the H2DCFDA dye.

Potential of pulsed corona discharges generated in water for the degradation of persistent pharmaceutical residues.

Anthropogenic pollutants and in particular pharmaceutical residues are a potential risk for potable water where they are found in increasing concentrations. Different environmental effects could already be linked to the presence of pharmaceuticals in surface waters even for low concentrations. Many pharmaceuticals withstand conventional water treatment technologies. Consequently, there is a need for new water purification techniques. Advanced oxidation processes (AOP), and especially plasmas with their ability to create reactive species directly in water, may offer a promising solution. We developed a plasma reactor with a coaxial geometry to generate large volume corona discharges directly in water and investigated the degradation of seven recalcitrant pharmaceuticals (carbamazepine, diatrizoate, diazepam, diclofenac, ibuprofen, 17α-ethinylestradiol, trimethoprim). For most substances we observed decomposition rates from 45% to 99% for treatment times of 15-66 min. Especially ethinylestradiol and diclofenac were readily decomposed. As an inherent advantage of the method, we found no acidification and only an insignificant increase in nitrate/nitrite concentrations below legal limits for the treatment. Studies on the basic plasma chemical processes for the model system of phenol showed that the degradation is primarily caused by hydroxyl radicals.

Plasma jet's shielding gas impact on bacterial inactivation.

One of the most desired aims in plasma medicine is to inactivate prokaryotic cells and leave eukaryotic cells unharmed or even stimulate proliferation to promote wound healing. The method of choice is to precisely control the plasma component composition. Here the authors investigate the inactivation of bacteria (Escherichia coli) by a plasma jet treatment. The reactive species composition created by the plasma in liquids is tuned by the use of a shielding gas device to achieve a reactive nitrogen species dominated condition or a reactive oxygen species dominated condition. A strong correlation between composition of the reactive components and the inactivation of the bacteria is observed. The authors compare the results to earlier investigations on eukaryotic cells and show that it is possible to find a plasma composition where bacterial inactivation is strongest and adverse effects on eukaryotic cells are minimized.

Adhesion of mussel foot protein Mefp-5 to mica: an underwater superglue.

Mussels have a remarkable ability to attach their holdfast, or byssus, opportunistically to a variety of substrata that are wet, saline, corroded, and/or fouled by biofilms. Mytilus edulis foot protein-5 (Mefp-5) is one of several proteins in the byssal adhesive plaque of the mussel M. edulis. The high content of 3,4-dihydroxyphenylalanine (Dopa) (~30 mol %) and its localization near the plaque-substrate interface have often prompted speculation that Mefp-5 plays a key role in adhesion. Using the surface forces apparatus, we show that on mica surfaces Mefp-5 achieves an adhesion energy approaching E(ad) = ~-14 mJ/m(2). This exceeds the adhesion energy of another interfacial protein, Mefp-3, by a factor of 4-5 and is greater than the adhesion between highly oriented monolayers of biotin and streptavidin. The adhesion to mica is notable for its dependence on Dopa, which is most stable under reducing conditions and acidic pH. Mefp-5 also exhibits strong protein-protein interactions with itself as well as with Mefp-3 from M. edulis.

The search for the hydrophobic force law.

After nearly 30 years of research on the hydrophobic interaction, the search for the hydrophobic force law is still continuing. Indeed, there are more questions than answers, and the experimental data are often quite different for nominally similar conditions, as well as, apparently, for nano-, micro-, and macroscopic surfaces. This has led to the conclusion that the experimentally observed force-distance relationships are either a combination of different 'fundamental' interactions, or that the hydrophobic force-law, if there is one, is complex--depending on numerous parameters. The only unexpectedly strong attractive force measured in all experiments so far has a range of D approximately 100-200 angstroms, increasing roughly exponentially down to approximately 10-20 angstroms and then more steeply down to adhesive contact at D = 0 or, for power-law potentials, effectively at D approximately 2 angstroms. The measured forces in this regime (100-200 angstroms) and especially the adhesive forces are much stronger, and have a different distance-dependence from the continuum VDW force (Lifshitz theory) for non-conducting dielectric media. We suggest a three-regime force-law for the forces observed between hydrophobic surfaces: In the first, from 100-200 angstroms to thousands of angstroms, the dominating force is created by complementary electrostatic domains or patches on the apposing surfaces and/or bridging vapour cavities; a 'pure' but still not well-understood 'long-range hydrophobic force' dominates the second regime from approximately 150 to approximately 15 angstroms, possibly due to an enhanced Hamaker constant associated with the 'proton-hopping' polarizability of water; while below approximately 10-15 anstroms to contact there is another 'pure short-range hydrophobic force' related to water structuring effects associated with surface-induced changes in the orientation and/or density of water molecules and H-bonds at the water-hydrophobic interface. We present recent SFA and other experimental results, as well as a simplified model for water based on a spherically-symmetric potential that is able to capture some basic features of hydrophobic association. Such a model may be useful for theoretical studies of the HI over the broad range of scales observed in SFA experiments.

Lipopolysaccharide interaction is decisive for the activity of the antimicrobial peptide NK-2 against Escherichia coli and Proteus mirabilis.

Phosphatidylglycerol is a widely used mimetic to study the effects of AMPs (antimicrobial peptides) on the bacterial cytoplasmic membrane. However, the antibacterial activities of novel NK-2-derived AMPs could not be sufficiently explained by using this simple model system. Since the LPS (lipopolysaccharide)-containing outer membrane is the first barrier of Gram-negative bacteria, in the present study we investigated interactions of NK-2 and a shortened variant with viable Escherichia coli WBB01 and Proteus mirabilis R45, and with model membranes composed of LPS isolated from these two strains. Differences in net charge and charge distribution of the two LPS have been proposed to be responsible for the differential sensitivity of the respective bacteria to other AMPs. As imaged by TEM (transmission electron microscopy) and AFM (atomic force microscopy), NK-2-mediated killing of these bacteria was corroborated by structural alterations of the outer and inner membranes, the release of E. coli cytoplasma, and the formation of unique fibrous structures inside P. mirabilis, suggesting distinct and novel intracellular targets. NK-2 bound to and intercalated into LPS bilayers, and eventually induced the formation of transient heterogeneous lesions in planar lipid bilayers. However, the discriminative activity of NK-2 against the two bacterial strains was independent of membrane intercalation and lesion formation, which both were indistinguishable for the two LPS. Instead, differences in activity originated from the LPS-binding step, which could be demonstrated by NK-2 attachment to intact bacteria, and to solid-supported LPS bilayers on a surface acoustic wave biosensor.

The Contribution of DOPA to Substrate-Peptide Adhesion and Internal Cohesion of Mussel-Inspired Synthetic Peptide Films.

Mussels use a variety of 3, 4-dihydroxyphenyl-l-alanine (DOPA) rich proteins specifically tailored to adhering to wet surfaces. Synthetic polypeptide analogues of adhesive mussel foot proteins (specifically mfp-3) are used to study the role of DOPA in adhesion. The mussel-inspired peptide is a random copolymer of DOPA and N(5) -(2-hydroxyethyl)-l-glutamine synthesized with DOPA concentrations of 0-27 mol% and molecular weights of 5.9-7.1 kDa. Thin films (3-5 nm thick) of the mussel-inspired peptide are used in the surface forces apparatus (SFA) to measure the force-distance profiles and adhesion and cohesion energies of the films in an acetate buffer. The adhesion energies of the mussel-inspired peptide films to mica and TiO(2) surfaces increase with DOPA concentration. The adhesion energy to mica is 0.09 µJ m(-2) mol(DOPA) (-1) and does not depend on contact time or load. The adhesion energy to TiO(2) is 0.29 µJ m(-2) mol(DOPA) (-1) for short contact times and increases to 0.51 µJ m(-2) mol(DOPA) (-1) for contact times >60 min in a way suggestive of a phase transition within the film. Oxidation of DOPA to the quinone form, either by addition of periodate or by increasing the pH, increases the thickness and reduces the cohesion of the films. Adding thiol containing polymers between the oxidized films recovers some of the cohesion strength. Comparison of the mussel-inspired peptide films to previous studies on mfp-3 thin films show that the strong adhesion and cohesion in mfp-3 films can be attributed to DOPA groups favorably oriented within or at the interface of these films.

Significance of the cyclic structure and of arginine residues for the antibacterial activity of arenicin-1 and its interaction with phospholipid and lipopolysaccharide model membranes.

Arenicin-1 (Ar-1) is a beta-sheeted antimicrobial peptide from the marine lugworm Arenicola marina. To elucidate the significance of its unique 18-residue cyclic structure and of six cationic arginines for its biological activity and its interaction with biomembranes, we synthesized one linear peptide in which the two cysteines were exchanged for serines (C/S-Ar-1) and a cyclic peptide in which all arginines were replaced by lysines (R/K-Ar-1). We addressed antibacterial and hemolytic activities, the impact of the peptides on bacterial morphology, and their binding to, intercalation into, and permeabilization of model membranes composed of phospholipids or lipopolysaccharide (LPS). In accordance with high salt concentration in sea water, the antibacterial activity of Ar-1 was almost insensitive to high NaCl concentrations. In contrast, the linear derivative lost activity under these conditions against polymyxin B-resistant Proteus mirabilis. Ar-1 intercalated into phospholipid and LPS membranes and formed heterogeneous and short-lived lesions. However, when the peptide was present in both membrane leaflets, it formed defined pores. This characteristic was not observed for the linear derivative C/S-Ar-1. Apparently, the disulfide bond provides conforma-tional stability, which has an impact on salt tolerance, prevents fast degradation by trypsin, and is a prerequisite for the formation of structurally defined pores.

Hydramacin-1, structure and antibacterial activity of a protein from the basal metazoan Hydra.

Hydramacin-1 is a novel antimicrobial protein recently discovered during investigations of the epithelial defense of the ancient metazoan Hydra. The amino acid sequence of hydramacin-1 shows no sequence homology to any known antimicrobial proteins. Determination of the solution structure revealed that hydramacin-1 possesses a disulfide bridge-stabilized alphabeta motif. This motif is the common scaffold of the knottin protein fold. The structurally closest relatives are the scorpion oxin-like superfamily. Within this superfamily hydramacin-1 establishes a new family of proteins that all share antimicrobial activity. Hydramacin-1 is potently active against Gram-positive and Gram-negative bacteria including multi-resistant human pathogenic strains. It leads to aggregation of bacteria as an initial step of its bactericidal mechanism. Aggregated cells are connected via electron-dense contacts and adopt a thorn apple-like morphology. Analysis of the hydramacin-1 structure revealed an unusual distribution of amino acid side chains on the surface. A belt of positively charged residues is sandwiched by two hydrophobic areas. Based on this characteristic surface feature and on biophysical analysis of protein-membrane interactions, we propose a model that describes the aggregation effect exhibited by hydramacin-1.

Calcium adsorption and displacement: characterization of lipid monolayers and their interaction with membrane-active peptides/proteins.

BACKGROUND: The first target of antimicrobial peptides (AMPs) is the bacterial membrane. In the case of Gram-negative bacteria this is the outer membrane (OM), the lipid composition of which is extremely asymmetric: Whereas the inner leaflet is composed of a phospholipid mixture, the outer leaflet is made up solely from lipopolysaccharides (LPSs). LPS, therefore, represents the first target of AMPs. The binding and intercalation of polycationic AMPs is driven by the number and position of negatively charged groups of the LPS. Also, proteins other than cationic AMPs can interact with LPS, e.g. leading eventually to a neutralization of the endotoxic effects of LPS. We compared different biophysical techniques to gain insight into the properties of the electrical surface potentials of lipid monolayers and aggregates composed of LPSs and various phospholipids and their interaction with peptides and proteins. RESULTS: The net negative charge calculated from the chemical structure of the phospholipid and LPS molecules is linearly correlated with the adsorption of calcium to two-dimensional lipid monolayers composed of the respective lipids. However, the zeta-potentials determined by the electrophoretic mobility of LPS aggregates can only be interpreted by assuming a dependence of the plane of shear on the number of saccharides and charged groups. Various peptides and proteins were able to displace calcium adsorbed to monolayers. CONCLUSION: To characterize the electrical properties of negatively charged phospholipids and LPSs and their electrostatic interaction with various polycationic peptides/proteins, the adsorption of calcium to and displacement from lipid monolayers is a suitable parameter. Using the calcium displacement method, the binding of peptides to monolayers can be determined even if they do not intercalate. The interpretation of zeta-potential data is difficulty for LPS aggregates, because of the complex three-dimensional structure of the LPS molecules. However, the influence of peptides/proteins on the zeta-potential can be used to characterize the underlying interaction mechanisms.

Lipid-mediated resistance of Gram-negative bacteria against various pore-forming antimicrobial peptides.

Lipopolysaccharides (LPSs) play a dual role as target and as effector molecules. The knowledge of the LPS-induced activation of human immune cells is increasing; however, surprisingly, much less effort seems to be directed towards the understanding of the mechanisms leading to the killing of the bacterial organisms, which eventually results in the release of LPS from the bacterial surface into the blood circulation. We demonstrate mechanisms of interaction of peptides of the innate immune system (e.g. defensins and cathelicidins) as well as of externally administered antibiotics (e.g. Polymyxin B) with Gram-negative bacteria. The main focus is directed on data derived from electrical measurements on a reconstitution system of the outer membrane as an asymmetric bilayer composed on one side of LPS and on the other of phospholipids. All these antimicrobial peptides (AMPs) are membrane-active and induce the permeabilization of the reconstituted membranes by the formation of lesions. We found that differences in the activity of the AMPs against various sensitive and resistant Gram-negative bacteria can be explained solely by variations in the chemical structure of LPS, e.g. in the composition of the sugar head group. A reduction of the net negative charge of LPS is responsible for a reduced interaction with the polycationic AMPs and thus for resistance. A most important side effect of positively charged AMPs is the neutralization of the negatively charged LPS released from the bacterial surface as a consequence of AMP-induced killing.