ABSTRACT
Health monitoring of composite structures in aircraft is critical, as these structures are commonly utilized in weight-sensitive areas and innovative designs that directly impact flight safety and reliability. Traditional monitoring methods have limitations in monitoring area, strain limit, and signal processing. In this paper, a multifunctional sensor has been developed using acid-treated laser-induced graphene (A-LIG) with a multi-layer three-dimensional conductive network. Compared to untreated laser-induced graphene, the sensitivity of A-LIG sensor is increased by 100%. Furthermore, PDMS is used to fill the pores, which improves the fatigue performance of the A-LIG sensor. To obtain clear monitoring results, a data conversion algorithm is provided to convert the electrical signal obtained by the sensor into a strain field contour cloud map. The impact test of the A-LIG/PDMS sensor on the carbon fiber panel of the aircraft wing box segment verifies the effectiveness of its strain sensing. This work introduces a novel approach to fabricating flexible sensors with improved sensitivity, extended strain range, and cost-effectiveness. The sensor exhibits high sensitivity (gauge factor,GF≈ 387), is low hysteresis (â¼53 ms), and has a wide working range (up to 47%), and a highly stable and reproducible response over multiple test cycles (>18 000) with good switching response. It presents a promising and innovative direction for utilizing flexible sensors in the field of aircraft structural health monitoring.
