Anthropometric Analysis of the Faces of Chinese Women in Leadership Roles.

The aim of this study was to investigate the appearance of the faces of Chinese women in leadership positions through an anthropometric analysis of Women of China from 1949 to 2022. Photographs of cover women of Women of China were gathered and a total of 380 frontal and 101 lateral photographs were collected. The photographs were divided into 3 time phases: phase I (1949-1978): from the launch of Women of China magazine, up until the time of reform and opening; phase II (1978-2010): from the time of reform and opening until when Google China was blocked; and phase III (2010-2022): to the present. The horizontal corneal diameter (11.52 mm) was set as the reference value for the frontal face. The anthropometric results showed the width of the face, midface, and lower face decreased over time. The women at phase I had larger and round faces, smaller and narrower eyes, wider noses, and thicker lips; relatively masculine and hard-working woman image, as the occupations of women were mainly described as workers, farmers, and civil servants. Phase II showed smaller but still round faces, relatively wide-set round eyes, narrower noses, and smaller lips than in phase I; neutral features as skilled workers, engineers, entrepreneurs, civil servants, and researchers. Phase III showed oval faces, almond eyes, narrower noses, smaller full lips, and wider chins, reflecting a process of feminization; working in entertainment, sports, and science. The data from this study might serve as the recommended aesthetic proportions when performing plastic surgical procedures for talented woman.

Anthropometric analysis of the faces of Chinese beauty pageant winners, from the early 20th century to the present.

The aim of this study was to investigate the aesthetic characteristics of Chinese beauty through an anthropometric analysis of beauty pageant winners from 1952 to 2021. Photographs from 5 renowned Chinese beauty pageants (Miss World Pageant, Miss Earth Pageant, Miss Universe Pageant, Miss International Pageant, and Miss Chinese Cosmos Pageant) were gathered and a total of 294 frontal and 31 lateral photographs were collected. The photos were divided into 3 time phases: phase I (1952-1977): from the first time when Chinese girls participated in beauty pageants, up until the time of reform and opening; phase II (1978-2002): from reform and opening to the re-opening of the Miss Chinese Cosmos Pageant; phase III (2003-2021): to the present. The horizontal corneal diameter (11.52 mm) was set as the reference value for the frontal face. Among the 35 anthropometric items of frontal faces (26 distances and 9 angles) and 41 anthropometric items of lateral faces (33 distances and 8 angles), 21 anthropometric items (16 distances and 5 angles) and 8 proportional indices of frontal faces showed significant differences. On lateral pictures, 2 angles showed significant differences among the 3 phases. Regarding the anthropometric measurements that decreased across the 3 phases, the width of the face, midface, and lower face exhibited the greatest changes. The lower face width showed the most striking changes, with a decrease from 128.5 to 112.0 mm. The quadratic regression revealed a significant turning point after 1978, coinciding with the period of Chinese reform and opening, which had a profound impact on aesthetics.

Freeing and Stretching the Palatine Vessels From the Greater Palatine Foramen in Palatoplasty.

The aim of this paper is to present how to free and stretch the palatine vessels from the greater palatine foramen in palatoplasty. After a mucoperiosteal flap is raised, periosteal elevator is passed behind the palatine vessels to detach the periosteum around the vessels. Then, a blunt right-angle instrument is placed behind the palatine vessels, and the vessels are pulled from the foramen in the superior aspect, slightly forward (63 degrees) and medially (19 degrees) according to the direction to the greater palatine canal (GPC). The nasal mucosa is also released from the hard palate and from the lateral pharyngeal wall. After dividing the palatal aponeurosis and elevating the anterior flap, the first suture is inserted through the nasal layer of the mucosa at the level of the posterior border of the hard palate (A suture). The nasal layer is approximated and sutured. After the closure of the buccal layer, the 2 posterior flaps are joined to the small anterior flap. Finally, A suture is tied. In 60 cases of pushback palatoplasty, the palatine vessels were stretched from the greater palatine foramen. In literatures, the length of GPC is 26.97 mm. Anteroposterior diameter of the upper opening of GPC is 3.88 mm. The angle between the vertical plane and the axis of GPC is 19.09 degrees. The angle between the transverse plane and the axis of GPC is 62.63 degrees. Probably, this information is the values obtained in adults. As a matter of fact, similar values were obtained in our study on this subject.

The Distribution of the Nerves and Arteries of the Platysma for Clinical Applications.

This study aimed to provide anatomical data on the platysma for clinical procedures. The authors obtained 25 specimens from 15 adult Korean cadavers (9 men, 6 women; mean age, 72 years; range, 61-85 years). Lines connecting the gonion with the gnathion (G-GN) and the acromial end (acromial end of the clavicle) with the sternal end (sternal end of the clavicle) were used as references. Modified Sihler staining was used to trace the nerves distributed in the platysma. The superior border values of the platysma were 12.1 ± 2.7 mm, 31.5 ± 5.3 mm, 42.4 ± 5.6 mm, and 61.7 ± 6.4 mm, respectively, for sections 2 through 5 on the G-GN line. The inferior border values of the platysma were 83.6 ± 19.1 mm, 80.1 ± 14.0 mm, 74.8 ± 14.5 mm, 67.2 ± 13.7 mm, and 54.6 ± 7.1 mm, respectively, for the 5 sections on the acromial end of the clavicle-sternal end of the clavicle line. In the hyoid bone, cricoid cartilage, and jugular notch, the mean distance between the bilateral platysma was 14.4 ± 2.2 mm, 22.6 ± 10.6 mm, and 51.1 ± 15.7 mm, respectively. The mean angle at the cervical branch of the facial nerve and the anterior border of the sternocleidomastoid muscle sternal head was 28.7 ± 2.6 degrees and 53.4 ± 7.7 degrees from the G-GN line, respectively. The upper third of the platysma was supplied by branches of the facial artery and submental artery. The middle third was supplied by branches of the occipital artery and received its direct blood supply from branches of the external carotid artery. The lower third was supplied by branches of the transverse cervical artery. The authors hope that the results of this study will be helpful for rejuvenation procedures of the neck.

Thickness of the Deltoid Muscle and Location of the Anterior Branch of the Axillary Nerve and the Posterior Circumflex Humeral Artery for Deltoid Injections.

This study investigated the thickness of the deltoid muscle and the location of the anterior branch of the axillary nerve (AAN) and posterior circumflex humeral artery (PCHA), with the goal of maximizing the effectiveness of deltoid injections. Forty specimens from 22 adult Korean cadavers were used. A reference line was identified, connecting the anterior point of the deltoid muscle (AP) and the posterior point of the deltoid muscle (PP) on the surface. The midpoint between the AP and PP was used as the origin point (OP). The line connecting the OP and the lowest point of the deltoid tuberosity (DP) was used as the y-axis. The mean distance of the reference line from the AP to PP was 4.7 ± 0.7 cm. The vertical mean length of the deltoid muscle from the OP and DP was 16.1 ± 1.0 cm. At the 3, 5, and 7 cm sites, the thickness of the deltoid muscle was 0.62 ± 0.9, 0.73 ± 0.7, and 1.3 ± 1.1 cm, respectively. Most of the branches of the axillary nerve were concentrated in the third section (4-6 cm, 51%), while the branches of the PCHA were predominantly found in the fourth section (6-8 cm, 69%). The peripheral branches of the AAN entering the muscle were distributed between 2.2 and 9.8 cm from the acromion. The mean number of the peripheral branches of the AAN was 9.6 ± 3.4. In the deltoid muscle, the mean number of peripheral branches of the PCHA was 8.2 ± 2.8. Administering deltoid injections 5-6 cm below the OP is recommended to avoid axillary nerve injury.

Impact of Short Sleep Duration on the Incidence of Obesity and Overweight among Children and Adolescents.

Background and Objectives: The prevalence of obesity among children is increasing and is highlighting many problems. Lack of sleep is common among children and adolescents. Although several studies have investigated sleep duration and overweight and obesity from a sex perspective, data regarding age and sex effects remain limited and inconclusive. This study aimed to evaluate the risk(s) for overweight or obesity according to sleep duration among children and adolescents; to evaluate the effect of short sleep duration on the incidence of overweight/obesity among children and adolescents; and to evaluate sex differences in the risk of overweight or obesity with shorter sleep durations. Materials and Methods: The PubMed database was searched for relevant studies published up to June 30, 2021. Odds ratios for obesity/overweight were estimated for short compared with long sleep duration. Subgroup analysis based on sleep duration, sex, and study location was also performed. Results: The estimated odds ratio for combined obesity and overweight was 1.171 (95% confidence interval (CI) 1.092−1.256) according to short sleep duration. Obesity/overweight with short sleep duration was significantly prevalent in the <6 and 6−10 years' subgroups (odds ratio 1.226 (95% CI 1.083−1.387) and 1.341 (95% CI 1.175−1.530), respectively). Among boys, short sleep duration was significantly correlated with a high occurrence of obesity/overweight (odds ratio 1.294 (95% CI 1.153−1.452)); no such correlation was found among girls. Conclusions: Short sleep duration may increase risk of obesity among children and adolescents, especially those <6 and 6−10 years of age. In the subgroup analysis, the incidence of obesity/overweight for short sleep time revealed significant results among Asians and boys.

Morphological Boundaries of the Parotid Gland in Koreans.

ABSTRACT: This study aimed to examine the accurate location and boundary of the parotid gland in Koreans.Forty hemifaces from embalmed cadavers (mean age: 73 years) were studied. The line connecting the porion, gonion, and gnathion was used as a reference line. To measure the boundary of the parotid gland, the Frankfort horizontal line was used as the x-axis, whereas the vertical line passing through the porion was used as the y-axis. All measurements were taken from the lateral side of the face.The parotid gland has a variety of shapes: irregular, reverse triangle, and falciform. In all specimens, the boundary of the parotid gland was located 20 to 60 mm below the Frankfort horizontal line and located 10 mm anterior to the y-axis. On average, the most anterior and posterior distances of the parotid gland from the porion-gonion line were 36.4 ±â€Š13.9 mm and 20.1 ±â€Š10.5 mm, respectively, and the most inferior distance of the parotid gland from the gonion-gnathion line was 9.8 ±â€Š5.8 mm. All specimens of parotid glands were found within an area 20 to 40 mm below the Frankfort horizontal line and 10 mm to the left of the y-axis. The most anterior point of the parotid gland was observed at varying locations. The maximum value of the most anterior point was 61.26 mm; it rarely exceeded the ectocanthion. The most posterior points of the parotid gland were located between the mastoid process and sternocleidomastoid muscle.These results might be useful for preventing injury to the parotid gland during facial rejuvenation procedures.

Development and Usability of a Virtual Reality-Based Filler Injection Training System.

PURPOSE: As filler procedures have increased in popularity, serious injection-related complications (e.g., blindness and stroke) have also increased in number. Proper and effective training is important for filler procedure safety; however, limitations exist in traditional training methods (i.e. anatomical illustrations and cadaver studies). We aimed to describe the development process and evaluate the usability of a virtual reality (VR)-based aesthetic filler injection training system. MATERIALS AND METHODS: We developed the virtual reality hardware for the training system and a short guide, with a lecture regarding safe filler injection techniques. One hundred clinicians who attended a conference tested the training system. Participants completed system usability scale (SUS) and satisfaction questionnaires. RESULTS: Nearly half of the participants were aged 35-50 years, and 38% had more than 5 years of aesthetic experience. The mean SUS score was 59.8 (standard deviation, 12.23), with no significant differences among the evaluated subgroups. Approximately 76% of participants provided SUS scores of more than 51, indicating acceptable usability. Participants aged 35-50 years were more likely to rate the system as having poor usability than were those aged < 35 years (odds ratio = 5.20, 95% confidence interval: 1.35-20.08). CONCLUSIONS: This study was the first to develop and explore the usability of a VR-based filler training system. Nearly three-fourths of participants indicated that the training system has an acceptable level of usability. However, assessments in precise target audiences and more detailed usability information are necessary to further refine the training system. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

A Theoretical and Empirical Investigation of Design Characteristics in a Pb(Zr,Ti)O3-Based Piezoelectric Accelerometer.

A theoretical and experimental study on the design-to-performance characteristics of a compression-mode Pb(Zr,Ti)O3-based piezoelectric accelerometer is presented. Using the metamodeling to approximate the relationship between the design variables and the performances, the constituent components were optimized so that the generated electric voltage, representing sensitivity, could be maximized at different set values of the resonant frequency (25-40 kHz). Four kinds of optimized designs were created and fabricated into the accelerometer modules for empirical validation. The accelerometer modules fabricated according to the optimized designs were highly reliable with a broad range of resonant frequency as well as sufficiently high values of charge sensitivity. The fixed (or mounted) resonant frequency was between 16.1-30.1 kHz based on the impedance measurement. The charge sensitivity decreased from 296.8 to 79.4 pC/g with an increase of the resonant frequency, showing an inverse relation with respect to the resonant frequency. The design-dependent behaviors of the sensitivity and resonant frequency were almost identical in both numerical analysis and experimental investigation. This work shows that the piezoelectric accelerometer can be selectively prepared with best outcomes according to the requirements for the sensitivity and resonant frequency, fundamentally associated with trade-off relation.

Aging of the bony orbit in East Asians: a three-dimensional computed tomographic study.

PURPOSE: The purpose of this study was to evaluate age-related changes of orbital rim in Koreans and construct a reference data set for the aging phenomenon in Asians. METHODS: Data were collected from computed tomography (CT) scans of orbits and facial bones obtained from 107 Korean (55 males and 52 females) at intervals of 0.60 mm. Subjects was categorized according to sex and age as follows: young group (20-35 years) and old group (60 years and above). CT scans were reconstructed via three-dimensional (3D) modeling programs. The most lateral, medial, superior and inferior points of orbital rim were used as reference points. The orbital aperture area in each 3D model was measured using an analytical software program such as 3-Matic. RESULTS: The orbital aperture height showed no overall statistically significant difference (P > 0.05) with age in either sex. Changes were irregular with a combination of decrease and increased components. The mean change did not exceed about 0.1 mm. The orbital aperture area showed no significant change with increasing age in either male or female study populations. CONCLUSIONS: In this study, there was no significant enlargement of the orbital rim with increasing age in Koreans. The measurement data in the present study differ from previous studies involving White subjects, which revealed a significant increase in orbital aperture area.

Improved visible-blindness of AlGaN deep ultraviolet photodiode with monolithically integrated angle-insensitive Fabry-Perot filter.

Despite the rapidly increasing demand for accurate ultraviolet (UV) detection in various applications, conventional Si-based UV sensors are less accurate due to disruption by visible light. Recently, Ga(Al)N-based photodiodes have attracted great interest as viable platforms that can avoid such issues because their wide bandgap enables efficient detection of UV light and they are theoretically blind to visible and infrared light. However, the heteroepitaxy of a Ga(Al)N layer on sapphire substrates inevitably leads to defects, and the Ga(Al)N photodiode (PD) becomes not perfectly insensible to visible light. Employment of a dielectric stacked UV pass filter is possible to avoid unwanted absorption of visible light, but the angle-dependent pass band limits the detection angle. Here, we have demonstrated the Ag-Al2O3 Fabry-Perot UV pass filter-integrated AlGaN ultraviolet photodiode. The inherent optical extinction characteristics of Ag was utilized to design the fabrication-tolerant UV pass filter with a peak transmittance at ∼325 nm. As the angle of incidence increased, the peak transmission decreased from 45% to 10%, but the relative transmission spectrum remained almost unchanged. By integrating these filters, the visible light rejection ratio (responsivity for 315 nm light to responsivity for 405 nm light) was improved by a factor of 10, reaching a value of 106 at angles of up to 80 degrees.

Relationship of the lobular branch of the great auricular nerve to the tympanoparotid fascia: Spatial anatomy for salvage during face and neck lift.

To enable selection of a safer suspension site to use in face and neck lifting procedures, the spatial relationship between the tympanoparotid fascia and the great auricular nerve should be clarified. In this study, we aimed to elucidate the position of the tympanoparotid fascia and the pathway of the lobular branch of the great auricular nerve traversing the tympanoparotid fascia. Twenty hemifaces from non-preserved bequeathed Korean cadavers (5 males, 7 females; mean age, 77.0 years) were dissected to determine the great auricular nerve distribution close to the tympanoparotid fascia of clinical significance for face and neck lift procedures. We observed the tympanoparotid fascia in all specimens (20 hemifaces). The tympanoparotid fascia was located anteriorly between the tragus and intertragic notch. Regarding the spatial relationship between the tympanoparotid fascia and the great auricular nerve, we found the sensory nerve entering the tympanoparotid fascia in all specimens (100%), and the depth from the skin was approximately 4.5 mm; in 65% of the specimens, the lobular branch was found to run close to the tympanoparotid fascia before going into the earlobe. Provided with relatively safer surface mapping to access the tympanoparotid fascia free of the lobular branch of the great auricular nerve, surgeons may better protect the lobular branch by anchoring the SMAS-platysma flap and thread to the deeper superior and anterior portions of the expected tympanoparotid fascia.

Design Optimization of Bulk Piezoelectric Acceleration Sensor for Enhanced Performance.

While seeking to achieve high performances of a bulk piezoelectric acceleration sensor, we investigated the behavior of the design variables of the sensor components and optimized the sensor design using a numerical simulation based on piezoelectric analysis and metamodeling. The optimized results demonstrated that there was an exponential dependency in the trade-off relation between two performance indicators, the electric voltage and the resonant frequency, as induced by the design characteristics of the sensor. Among the design variables, a decrease in the base height and epoxy thickness and an increase in the piezo element's inner diameter had a positive effect on two performances, while the head dimensions (diameter and height) exhibited the opposite effect on them. The optimal sensor designs are proposed within the valid range of resonant frequency (25-47.5 kHz). Our redesign of a commercial reference sensor improved the resonant frequency by 13.2% and the electric voltage by 46.1%.

Clinical Anatomy for the Innervated Pattern and Boundary of the Subdeltoid Bursa.

The aim of this study was to accurately identify the distribution of sensory nerve branches running to bursa with mesoscopic dissection and boundaries following the injection of gelatin into the bursa. Eighteen shoulders of 11 Korean soft cadavers (average age, 65 years; age range, 43 - 88 years) were dissected. The most prominent point of greater tubercle of the humerus (GT) was used as a reference point. The horizontal line passing through GT was used as the x-axis while the vertical line passing through the GT was used as the y-axis. Average distances of the anterior, posterior, superior, and inferior from the GT were 1.9±0.6, 2.4±1.3, 2.1±0.7, and 3.2±1.5 cm, respectively. In 15 cases of 18 shoulders, the anterior branch of the axillary nerve was distributed to the subdeltoid bursa that was running posteriorly. The muscular branch of the anterior and middle parts of the deltoid was distributed to the branch of nerve that was running into the subdeltoid bursa. A branch of the posterior cord of brachial plexus was distributed to the subdeltoid bursa that was running anteriorly in three cases. Most of the branches of the axillary nerve were distributed into the posterolateral area. The branches of the posterior cord of brachial plexus were distributed in the anterolateral area. These results might be useful for preventing residual pain on the anterior shoulder region following an injection for the relief of shoulder pain.

Effect of structural design on the pullout strength of suture anchors for rotator cuff repair.

Various types of suture anchor designs are currently available for rotator cuff repair. The purpose of our study was to investigate the pullout strength of such anchors based on their structural design and the predominant geometric design factors affecting the pullout strength using finite element analysis. Finite element models were constructed using five cadaveric humeri and ten suture anchors with different designs. The pullout strength and distribution of bone stress around the anchor at three different directions of the applied force (0°, 45°, and 75°) were analyzed. The following geometric factors of suture anchor design were computed and their correlations with pullout strength assessed: Overall length, minor, and major diameters; number of threads; height of thread; distance between threads; helix angle; contact surface area between the anchor threads and surrounding bone; contact surface area between the cylindrical portion of the anchor; and surrounding bone and total contact surface area between the anchor and surrounding bone. The pullout strength and distribution of bone stress around the anchor varied according to the suture anchor designs and the direction of the applied force, respectively. The pullout strength had a strong positive correlation with the contact surface area between the anchor threads and surrounding bone, overall length, and the number and height of threads. This study demonstrated that suture anchor designs with increased contact surface area between the anchor threads and surrounding bone, overall length, and the number and height of threads can enhance the pullout strength during rotator cuff repair. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:3318-3327, 2018.

Comprehensive evaluation of the greater sciatic notch for sexual estimation through three-dimensional metric analysis using computed tomography based models.

The greater sciatic notch is an effective indicator for sexual estimation, which is the initial process to identify unknown skeleton. Visual assessment is the mainstream of analysis methods; however, the subjectivity of researchers is also questioned. Metric method using three-dimensional models reconstructed from radiographic images can ensure reproducible and stable measurement of the greater sciatic notch. In this study, the greater sciatic notch was analyzed in various manners, including distances, angles, and dimensions, with the aid of an automatic measurement program and a landmark verification system. Among 28 items, 15 measurements showed more than 85% accuracy. Measurements related to the posterior part of the greater sciatic notch near the posterior inferior iliac spine particularly showed higher accuracy (93.1%). To test this observation, "arithmetic posterior angle of the greater sciatic notch", a generalized form of partial angle of the greater sciatic notch, was designed. It showed more than 90% accuracy. When the results of the three-dimensional measurements were applied to classify dry bones, it proved to be valid in contemporary Korean population. The method and results of this study can be referenced in wider use of the greater sciatic notch analysis.

The distributed pattern of the neurovascular structures around clavicle to minimize structural injury in clinical field: anatomical study.

INTRODUCTION: The aim of this study was to determine the location and distribution pattern of neurovascular structures superior and inferior to the clavicle by detailed dissection. METHODS: Fifteen adult non-embalmed cadavers with a mean age of 71.5 years were studied. For measurements, the most prominent point of the sternal end of the clavicle (SEC) on anterior view and the most prominent point of the acromial end of the clavicle (AEC) were identified and divided five equal sections before dissection. A line connecting the SEC and AEC was used as a reference line. The surrounding neurovascular structures were investigated. RESULTS: The supraclavicular nerve was mainly distributed in the second and the third sections (distribution frequency: 41.30% and 30.43%, respectively) from AEC. Branches of the thoracoacromial artery were mainly distributed in the second, third, and fourth sections (distribution frequency: 21.15%, 26.92%, and 28.85%, respectively). Branches of the subclavian vein were mainly distributed in the third and fourth sections (distribution frequency: 23.26 and 30.23%, respectively). Distribution frequency of subclavian vein, subclavian artery, and brachial plexus ranged from 31.3 to 57.5%. DISCUSSION: When the clavicle was divided into five sections, there was relatively little distribution of neurovascular damage in the first section or the fifth section. This study reveals the average location of subclavian vein with artery and brachial plexus. Results of this study could be used as reference during surgery.

The Distribution Pattern of the Neurovascular Structures for Anterior Ankle Arthroscopy to Minimize Structural Injury: Anatomical Study.

INTRODUCTION: The aim of this study was to investigate entry points for anterior ankle arthroscopy that would minimize the risk of neurovascular injury. METHODS: Thirty-eight specimens from 21 Korean cadavers (age range from 43 to 92 years, mean age of 62.3 years) were used for the study. For the measurements, the most prominent points of the lateral malleolus (LM) and the medial malleolus (MM) were identified before dissection. A line connecting the LM and MM, known as the intermalleolar line, was used as a reference line. We measured 14 variables passed on the reference line. RESULTS: This study found that the nerves were located at 40.0%, 50.0%, and 82.0% of the reference line from the lateral malleolus. We also found that the arteries were located at 22.0%, 35.0%, and 60% of the reference line from the lateral malleolus. DISCUSSION: If all the variables are combined (nerves, arteries, and veins), then there is no safety zone for anterior portal placement. Therefore, we recommend that surgeons concentrate primarily on the arteries and nerves in the clinical setting.

Anatomical parameters of the rectus capitis posterior minor muscle based on a new magnetic resonance scan method / Parámetros anatómicos del músculo recto posterior menor de la cabeza basado en un nuevo método de escaner con resonancia magnética

The past findings confirm that the Rectus Capitis Posterior minor (RCPmi) is connected to the cervical spinal dura mater via the Myodural Bridge (MDB) through the posterior antlanto-occipital interspace. It is hypothesized to perform some functions. Furthermore, some clinical studies found that the pathology of RCPmi might be related to chronic headaches. But few studies were related to the morphological parameters of the RCPmi. It would be conducive to performing clinical researches on the RCPmi and MDB. To explore the optimal section for measuring the RCPmi by MRI and provide imaging anatomy parameters of the RCPmi for clinical research. The RCPmi was measured in the dissection of 10 formalin-fixed cadaver specimens. The morphological parameters of the RCPmi were obtained. Based on these parameters, T2-weighted images of the RCPmi were collected from 109 healthy adults by using the MRIs with different oblique sagittal scanning angles. The parameters of length and area of the RCPmi on the scanning sections were measured using MRI workstation and Mimics software. The length of RCPmi reached a maximum at 30 degrees scanning leaned from the posterior median line through the dens of the axis in oblique sagittal section. At this scanning section, the length of RCPmi was 21.2 ± 2.6 mm in males and 19.3 ± 2.4 mm in females and the area of RCPmi was 91.9 ± 27.2 mm2 in males and 73.3 ± 22 mm2 in females. These parameters of RCPmi were present with significant gender differences (P < 0.05) but was not age related. Thirty degrees leaned from the median line was suggested to be the optimum scanning angle to display the RCPmi in oblique sagittal section. The reference values of length and area of the RCPmi were established for studies of hypertrophy or amyotrophy of the RCPmi.

Hallazgos previos confirman que el músculo rector posterior menor de la cabeza (mRPMC) está conectado a la duramadre cervical por medio del puente miodural (PMD) a través del espacio intermedio antlanto-occipital posterior. Se plantea la hipótesis de su capacidad para realizar algunas funciones. Además, estudios clínicos encontraron que la patología del mRPMC podría estar relacionada con dolores de cabeza crónicos. Sin embargo, pocos estudios se relacionaron con los parámetros morfológicos del mRPMC. Se buscará realizar investigaciones clínicas sobre el mRPMC y el PMD, además de explorar la sección óptima que permita medir el mRPMC por resonancia magnética (RM) y que permita obtener la imagen adecuada para la identificación de los parámetros anatómicos del mRPMC en la investigación clínica. Se midió el mRPMC durante la disección de 10 especímenes, correspondientes a cadáveres fijados con formalina. Se obtuvieron los parámetros morfológicos del mRPMC. Basándose en estos parámetros, se estudiaron imágenes ponderadas en T2 del mRPMC de 109 adultos sanos, utilizando las resonancias magnéticas con diferentes ángulos de exploración sagital oblicua. Los parámetros de longitud y área del mRPMC en las secciones de exploración se midieron utilizando la estación de trabajo del equipo de RM y el software Mimics. La longitud del mRPMC alcanzó un máximo de 30 grados de exploración, inclinado desde la línea mediana posterior, a través del eje en la sección sagital oblicua. En esta sección la longitud del mRPMC fue 21,2 ± 2,6 mm en los hombres y 19,3 ± 2,4 mm en las mujeres, y el área del mRPMC fue 91,9 ± 27,2 mm2 en los hombres y 73,3 ± 22 mm2 en las mujeres. Se observaron diferencias significativas de sexo en estos parámetros del mRPMC (P <0,05) sin embargo estos no estaban relacionados con la edad. Se sugirieron 30 grados inclinados a partir de la línea mediana como el ángulo óptimo de exploración para mostrar el mRPMC en la sección sagital oblicua. Los valores de referencia de longitud y área del mRPMC se establecieron para estudios de hipertrofia o amiotrofia del mRPMC.