Experimental Study on Shear Capacity of Reinforced Concrete Beams with Corroded Longitudinal Reinforcement.

In this study, shear tests were conducted to investigate the effects of longitudinal reinforcement corrosion on the shear capacity of reinforced concrete (RC) members with transverse reinforcement. To this end, a total of eight test specimens were fabricated, and the corrosion rates and anchorage details of rebars were set as test variables. In addition, an accelerated corrosion technique was used to introduce corrosion into the longitudinal reinforcement without corroding shear reinforcement. The test results indicated that the capacities of the specimens in which tension reinforcement was not properly anchored at the ends of the members decreased rapidly at high corrosion rates, whereas the capacities of the specimens in which tension reinforcement was properly anchored by hooks were similar to or higher than those of the non-corroded specimens, despite bond loss caused by corrosion.

Rheological Property Criteria for Buildable 3D Printing Concrete.

Fresh concrete used in 3D printing should ensure adequate yield stress, otherwise the printed concrete layer may suffer intolerable deformation or collapse during the printing process. In response to this issue, an analytical study was carried out to derive the initial yield stress and hardening coefficient of fresh concrete suitable for 3D printing. The maximum shear stress distribution of fresh concrete was calculated using a stress transformation equation derived from the equilibrium condition of forces. In addition, the elapsed time experienced by fresh concrete during the printing processes was estimated and was then substituted into the elapsed time-yield stress function to calculate the yield stress distribution. Based on these results, an algorithm capable of deriving both the initial yield stress and the hardening coefficient required for printing fresh concrete up to the target height was proposed and computational fluid dynamics (CFD) analyses were performed to verify the accuracy of the proposed model.

Heterophyid trematodes recovered from people residing along the Boseong River, South Korea.

We conducted an epidemiological survey to determine the status of heterophyid fluke infections among people residing along the Boseong River, Gokseong-gun, South Korea (= Korea) from October 2011 to February 2012. Fecal specimens were collected from 115 (male 51, female 64) people and examined for intestinal helminth eggs using the Kato-Katz thick smear technique. The eggs of Metagonimus yokogawai together with other Metagonimus spp. were detected in 28 (24.3%) cases. Eleven egg positive people were treated with 10mg/kg praziquantel followed by MgSO4 purging in order to recover the adult flukes. Whole consecutive diarrheic stools were collected individually 4-5 times. Adult flukes recovered were 66,499 specimens (6045.4/positive case) of M. yokogawai, 343 (38.1) of Metagonimus miyatai, 3293 (299.4) of Metagonimus takahashii, 81 (20.3) of Heterophyes nocens, 6 (3.0) of Heterophyopsis continua, and 1 (1.0) of Stictodora fuscata. The results indicated that the surveyed area is a highly endemic area of metagonimiasis (three Metagonimus species) with low-grade mixed infections of 3 other heterophyid flukes. The infected people experienced variable degrees of gastrointestinal discomfort and indigestion. They consumed raw freshwater and brackish water fish, including sweetfish and mullets. It is strongly recommended that people residing in the survey area avoid eating raw fish to prevent M. yokogawai and other heterophyid infections.