Switching Hydrophobic Interface with Ionic Valves for Reversible Zinc Batteries.

Developing hydrophobic interface has proven effective in addressing dendrite growth and side reactions during zinc (Zn) plating in aqueous Zn batteries. However, this solution inadvertently impedes the solvation of Zn2+ with H2O and subsequent ionic transport during Zn stripping, leading to insufficient reversibility. Herein, an adaptive hydrophobic interface that can be switched "on" and "off" by ionic valves to accommodate the varying demands for interfacial H2O during both the Zn plating and stripping processes, is proposed. This concept is validated using octyltrimethyl ammonium bromide (C8TAB) as the ionic valve, which can initiatively establish and remove a hydrophobic interface in response to distinct electric-field directions during Zn plating and stripping, respectively. Consequently, the Zn anode exhibits an extended cycling life of over 2500 h with a high Coulombic efficiency of ≈99.8%. The full cells also show impressive capacity retention of over 85% after 1 000 cycles at 5 A g-1. These findings provide a new insight into interface design for aqueous metal batteries.

A Self-Deoxidizing Electrolyte Additive Enables Highly Stable Aqueous Zinc Batteries.

In aqueous zinc (Zn) batteries, the Zn anode suffers from severe corrosion reactions and consequent dendrite growth troubles that cause fast performance decay. Herein, we uncover the corrosion mechanism and confirm that the dissolved oxygen (DO) other than the reputed proton is a principal origin of Zn corrosion and by-product precipitates, especially during the initial battery resting period. In a break from common physical deoxygenation methods, we propose a chemical self-deoxygenation strategy to tackle the DO-induced hazards. As a proof of concept, sodium anthraquinone-2-sulfonate (AQS) is introduced to aqueous electrolytes as a self-deoxidizing additive. As a result, the Zn anode sustains a long-term cycling of 2500 h at 0.5 mA cm-2 and over 1100 h at 5 mA cm-2 together with a high Coulombic efficiency up to 99.6 %. The full cells also show a high capacity retention of 92 % after 500 cycles. Our findings provide a renewed understanding of Zn corrosion in aqueous electrolytes and also a practical solution towards industrializing aqueous Zn batteries.

A Zn-based catalyst with high oxygen reduction activity and anti-poisoning property for stable seawater batteries.

Seawater batteries (SWBs) are a key part of the future underwater energy network for maritime safety and resource development due to their high safety, long lifespan, and eco-friendly nature. However, the complicated seawater composition and pollution, such as the S2-, usually poison the catalyst and lead to the degradation of the battery performance. Here, Zn single-atom catalysts (SACs) were demonstrated as effective oxygen reduction reaction catalysts with high anti-poisoning properties by density functional theory calculation and the Zn SACs anchoring on an N, P-doped carbon substrate (Zn-SAC@PNC) was synthesized by a one-pot strategy. Zinc active sites ensure the anti-poisoning property toward S2-, and N, P-doped carbon helps improve the activity. Therefore, Zn-SAC@PNC exhibits superior activity (E1/2: 0.87 V, Tafel slope: 69.5 mV dec-1) compared with Pt/C and shows a lower decay rate of the voltage after discharge in lean-oxygen natural seawater. In the presence of S2-, Zn-SAC@PNC can still maintain its original catalytic activity, which ensures the stable operation of SWBs in the marine environment with sulfur-based pollutants. This study provides a new strategy to design and develop efficient cathode materials for SWBs.

Integrating SEI into Layered Conductive Polymer Coatings for Ultrastable Silicon Anodes.

Tackling the huge volume expansion of silicon (Si) anode desires a stable solid electrolyte interphase (SEI) to prohibit the interfacial side reactions. Here, a layered conductive polyaniline (LCP) coating is built on Si nanoparticles to achieve high areal capacity and long lifespan. The conformal LCP coating stores electrolyte in interlamination spaces and directs an in situ formation of LCP-integrated hybrid SEI skin with uniform distribution of organic and inorganic components, enhancing the flexibility of the SEI to buffer the volume changes and maintaining homogeneous ion transport during cycling. As a result, the Si anode shows a remarkable cycling stability under high areal capacity (≈3 mAh cm-2 ) after 150 cycles and good rate performance of 942 mAh g-1 at 5 A g-1 . This work demonstrates the great potential of regulating the SEI properties by a layered polymer-directing SEI formation for the mechanical and electrochemical stabilization of Si anodes.

Steering surface reconstruction of copper with electrolyte additives for CO2 electroreduction.

Electrocatalytic CO2 reduction to value-added hydrocarbon products using metallic copper (Cu) catalysts is a potentially sustainable approach to facilitate carbon neutrality. However, Cu metal suffers from unavoidable and uncontrollable surface reconstruction during electrocatalysis, which can have either adverse or beneficial effects on its electrocatalytic performance. In a break from the current catalyst design path, we propose a strategy guiding the reconstruction process in a favorable direction to improve the performance. Typically, the controlled surface reconstruction is facilely realized using an electrolyte additive, ethylenediamine tetramethylenephosphonic acid, to substantially promote CO2 electroreduction to CH4 for commercial polycrystalline Cu. As a result, a stable CH4 Faradaic efficiency of 64% with a partial current density of 192 mA cm-2, thus enabling an impressive CO2-to-CH4 conversion rate of 0.25 µmol cm-2 s-1, is achieved in an alkaline flow cell. We believe our study will promote the exploration of electrochemical reconstruction and provide a promising route for the discovery of high-performance electrocatalysts.

Doping palladium with tellurium for the highly selective electrocatalytic reduction of aqueous CO2 to CO.

Designing highly selective and energy-efficient electrocatalysts to minimize the competitive hydrogen evolution reaction in the electrochemical reduction of aqueous CO2 remains a challenge. In this study, we report that doping Pd with a small amount of Te could selectively convert CO2 to CO with a low overpotential. The PdTe/few-layer graphene (FLG) catalyst with a Pd/Te molar ratio of 1 : 0.05 displayed a maximum CO faradaic efficiency of about 90% at -0.8 V (vs. a reversible hydrogen electrode, RHE), CO partial current density of 4.4 mA cm-2, and CO formation turnover frequency of 0.14 s-1 at -1.0 V (vs. a RHE), which were 3.7-, 4.3-, and 10-fold higher than those of a Pd/FLG catalyst, respectively. Density functional calculations showed that Te adatoms preferentially bind at the terrace sites of Pd, thereby suppressing undesired hydrogen evolution, whereas CO2 adsorption and activation occurred on the high index sites of Pd to produce CO.

Heterogeneous electrochemical CO2 reduction using nonmetallic carbon-based catalysts: current status and future challenges.

Electrochemical CO2 reduction (ECR) offers an important pathway for renewable energy storage and fuels production. It still remains a challenge in designing highly selective, energy-efficient, robust, and cost-effective electrocatalysts to facilitate this kinetically slow process. Metal-free carbon-based materials have features of low cost, good electrical conductivity, renewability, diverse structure, and tunability in surface chemistry. In particular, surface functionalization of carbon materials, for example by doping with heteroatoms, enables access to unique active site architectures for CO2 adsorption and activation, leading to interesting catalytic performances in ECR. We aim to provide a comprehensive review of this category of metal-free catalysts for ECR, providing discussions and/or comparisons among different nonmetallic catalysts, and also possible origin of catalytic activity. Fundamentals and some future challenges are also described.