Metronomic chemotherapy in cancer treatment: new wine in an old bottle.

Over the past two decades, metronomic chemotherapy has gained considerable attention and has demonstrated remarkable success in the treatment of cancer. Through chronic administration and low-dose regimens, metronomic chemotherapy is associated with fewer adverse events but still effectively induces disease control. The identification of its antiangiogenic properties, direct impact on cancer cells, immunomodulatory effects on the tumour microenvironment, and metabolic reprogramming ability has established the intrinsic multitargeted nature of this therapeutic approach. Recently, the utilization of metronomic chemotherapy has evolved from salvage treatment for metastatic disease to adjuvant maintenance therapy for high-risk cancer patients, which has been prompted by the success of several substantial phase III trials. In this review, we delve into the mechanisms underlying the antitumour effects of metronomic chemotherapy and provide insights into potential combinations with other therapies for the treatment of various malignancies. Additionally, we discuss health-economic advantages and candidates for the utilization of this treatment option.

A Simulation Study to Reveal the Epidemiology and Aerosol Transmission Characteristics of Botrytis cinerea in Grape Greenhouses.

Most previously studies had considered that plant fungal disease spread widely and quickly by airborne fungi spore. However, little is known about the release dynamics, aerodynamic diameter, and pathogenicity threshold of fungi spore in air of the greenhouse environment. Grape gray mold is caused by Botrytis cinerea; the disease spreads in greenhouses by spores in the air and the spore attaches to the leaf and infects plant through the orifice. In this study, 120 µmol/L propidium monoazide (PMA) were suitable for treatment and quantitation viable spore by quantitative real-time PCR, with a limit detection of 8 spores/mL in spore suspension. In total, 93 strains of B. cinerea with high pathogenicity were isolated and identified from the air samples of grapevines greenhouses by a portable sampler. The particle size of B. cinerea aerosol ranged predominately from 0.65-3.3 µm, accounting for 71.77% of the total amount. The B. cinerea spore aerosols were infective to healthy grape plants, with the lowest concentration that could cause disease being 42 spores/m3. Botrytis cinerea spores collected form six greenhouse in Shandong Province were quantified by PMA-qPCR, with a higher concentration (1182.89 spores/m3) in May and June and a lower concentration in July and August (6.30 spores/m3). This study suggested that spore dispersal in aerosol is an important route for the epidemiology of plant fungal disease, and these data will contribute to the development of new strategies for the effective alleviation and control of plant diseases.

Dynamic accuracy measurement method for star trackers using a time-synchronized high-accuracy turntable.

Star trackers are typically used in a spacecraft to provide absolute attitude information to the on-board attitude control system so as to promote high accuracy. The performance of the star tracker is rather important. Attitude incorrectness provided by star trackers may lead to bad navigation with big deviations, even failure of satellites. Therefore, how to realize and verify the accuracy is crucial. As a matter of fact, it is difficult to validate accuracy of star trackers on the ground, especially for star trackers under highly dynamic conditions. In this paper, an accuracy measurement method for star trackers under dynamic conditions is proposed, utilizing a high-accuracy swing table to provide reference to compare. To this end, a swing table, star tracker, and the test equipment are synchronized, in order to reduce systematic errors. As the motion trajectory of the swing table can be set beforehand, the initial attitude of the star tracker can be predicted through a set of coordinate transformations. As a result, the star tracker is able to keep tracking, regardless of the angular velocity of the swing table. This makes the statistical sample points more sufficient and the results more reliable. Moreover, it can evaluate the angular velocity of star trackers up to 20°/s. In comparison with the conventional method with simulated stars, this method utilizes real navigation stars as observation targets making the measurement results much closer to the on-orbit performance. Lastly, but much more importantly, it can also verify the performance of a star tracker in one experiment, such as sensitivity, static performance, capture probability, and so on. Experimental results demonstrate that the proposed method is effective, especially for highly dynamic star trackers. Such a measurement environment is close to the in-orbit conditions, and it can satisfy the stringent requirement for star trackers under high dynamics.

Generative learning facilitated discovery of high-entropy ceramic dielectrics for capacitive energy storage.

Dielectric capacitors offer great potential for advanced electronics due to their high power densities, but their energy density still needs to be further improved. High-entropy strategy has emerged as an effective method for improving energy storage performance, however, discovering new high-entropy systems within a high-dimensional composition space is a daunting challenge for traditional trial-and-error experiments. Here, based on phase-field simulations and limited experimental data, we propose a generative learning approach to accelerate the discovery of high-entropy dielectrics in a practically infinite exploration space of over 1011 combinations. By encoding-decoding latent space regularities to facilitate data sampling and forward inference, we employ inverse design to screen out the most promising combinations via a ranking strategy. Through only 5 sets of targeted experiments, we successfully obtain a Bi(Mg0.5Ti0.5)O3-based high-entropy dielectric film with a significantly improved energy density of 156 J cm-3 at an electric field of 5104 kV cm-1, surpassing the pristine film by more than eight-fold. This work introduces an effective and innovative avenue for designing high-entropy dielectrics with drastically reduced experimental cycles, which could be also extended to expedite the design of other multicomponent material systems with desired properties.

Calcitonin gene­related peptide alleviates hyperoxia­induced human alveolar cell injury via the CGRPR/TRPV1/Ca2+ axis.

Although exogenous calcitonin gene­related peptide (CGRP) protects against hyperoxia­induced lung injury (HILI), the underlying mechanisms remain unclear. The present study attempted to elucidate the molecular mechanism by which CGRP protects against hyperoxia­induced alveolar cell injury. Human alveolar A549 cells were treated with 95% hyperoxia to establish a hyperoxic cell injury model. ELISA was performed to detect the CGRP secretion. Immunofluorescence, quantitative (q)PCR, and western blotting were used to detect the expression and localization of CGRP receptor (CGRPR) and transient receptor potential vanilloid 1 (TRPV1). Cell counting kit­8 and flow cytometry were used to examine the proliferation and apoptosis of treated cells. Digital calcium imaging and patch clamp were used to analyze the changes in intracellular Ca2+ signaling and membrane currents induced by CGRP in A549 cells. The mRNA and protein expression levels of Cyclin D1, proliferating cell nuclear antigen (PCNA), Bcl­2 and Bax were detected by qPCR and western blotting. The expression levels of CGRPR and TRPV1 in A549 cells were significantly downregulated by hyperoxic treatment, but there was no significant difference in CGRP release between cells cultured under normal air and hyperoxic conditions. CGRP promoted cell proliferation and inhibited apoptosis in hyperoxia, but selective inhibitors of CGRPR and TRPV1 channels could effectively attenuate these effects; TRPV1 knockdown also attenuated this effect. CGRP induced Ca2+ entry via the TRPV1 channels and enhanced the membrane non­selective currents through TRPV1 channels. The CGRP­induced increase in intracellular Ca2+ was reduced by inhibiting the phospholipase C (PLC)/protein kinase C (PKC) pathway. Moreover, PLC and PKC inhibitors attenuated the effects of CGRP in promoting cell proliferation and inhibiting apoptosis. In conclusion, exogenous CGRP acted by inversely regulating the function of TRPV1 channels in alveolar cells. Importantly, CGRP protected alveolar cells from hyperoxia­induced injury via the CGRPR/TRPV1/Ca2+ axis, which may be a potential target for the prevention and treatment of the HILI.

Activating the healing process: three-dimensional culture of stem cells in Matrigel for tissue repair.

BACKGROUND: To establish a strategy for stem cell-related tissue regeneration therapy, human gingival mesenchymal stem cells (hGMSCs) were loaded with three-dimensional (3D) bioengineered Matrigel matrix scaffolds in high-cell density microtissues to promote local tissue restoration. METHODS: The biological performance and stemness of hGMSCs under 3D culture conditions were investigated by viability and multidirectional differentiation analyses. A Sprague‒Dawley (SD) rat full-thickness buccal mucosa wound model was established, and hGMSCs/Matrigel were injected into the submucosa of the wound. Autologous stem cell proliferation and wound repair in local tissue were assessed by histomorphometry and immunohistochemical staining. RESULTS: Three-dimensional suspension culture can provide a more natural environment for extensions and contacts between hGMSCs, and the viability and adipogenic differentiation capacity of hGMSCs were significantly enhanced. An animal study showed that hGMSCs/Matrigel significantly accelerated soft tissue repair by promoting autologous stem cell proliferation and enhancing the generation of collagen fibers in local tissue. CONCLUSION: Three-dimensional cell culture with hydrogel scaffolds, such as Matrigel, can effectively improve the biological function and maintain the stemness of stem cells. The therapeutic efficacy of hGMSCs/Matrigel was confirmed, as these cells could effectively stimulate soft tissue repair to promote the healing process by activating the host microenvironment and autologous stem cells.

How incubation temperature affects hatchling performance in reptiles: an integrative insight based on plasticity in metabolic enzyme.

Evaluating the effects of temperature variations on animals plays an important role in understanding the threat of climate warming. The effects of developmental temperature on offspring performance are critical in evaluating the effects of warming temperatures on the fitness of oviparous species, but the physiological and biochemical basis of this developmental plasticity is largely unknown. In this study, we incubated eggs of the turtle Pelodiscus sinensis at low (24 °C), medium (28 °C), and high (32 °C) temperatures, and evaluated the effects of developmental temperature on offspring fitness, and metabolic enzymes in the neck and limb muscles of hatchlings. The hatchlings from eggs incubated at the medium temperature showed better fitness-related performance (righting response and swimming capacity) and higher activities of metabolic enzymes (hexokinase, HK; lactate dehydrogenase, LDH) than hatchlings from the eggs incubated at high or low temperatures. In addition, the swimming speed and righting response were significantly correlated with the HK activities in limb (swimming speed) and neck (righting response) muscles, suggesting that the developmental plasticity of energy metabolic pathway might play a role in determining the way incubation temperature affects offspring phenotypes. Integrating the fitness-related performance and the activities of metabolic enzymes, we predict that the P. sinensis from high latitude would not face the detrimental effects of climate warming until the average nest temperatures reach 32 °C.

First Report of Sphingobacterium multivorum Causing Bacterial Rot of Cauliflower mushroom (Sparassis latifolia) in China.

Cauliflower mushroom (Sparassis latifolia), is widely distributed in Australia, North America, Europe, and East Asia (Bashir et al., 2020). It is known for its medicinal significance due to the availability of various pharmacological substances and their use in health supplements (Bashir et al., 2017). In recent years, with the development of artificial cultivation technology, S. latifolia has been industrialized in China, with an annual output value 50 million dollars. In March 2023, approximately 15% of S. latifolia showed obvious bacterial rot in mushroom hothouse (about 0.05 ha), located in Shuangliu county, Sichuan province, China (104°7'51"N, 30°25'2"E). The affected parts appear water-soaked, and become sunken and softened as the disease progresses. In the finally, all the fruiting body tissues turn into paste, with colors pale yellow, and have a foul smell. The pathogen was isolated from the margin of the lesions by dilution and streaking techniques onto Nutrient Agar, and incubated at 28℃ in the dark for 2-3 days. A single colony was re-streak for purification. Eight isolates were obtained from five samples collected randomly. The representative three isolates were selected for further characterization. For pathogenicity testing, ten health fruit bodies of S. latifolia were selected (for per isolate). Bacterial suspensions (1 × 107 CFU/ml) of the three isolates were applied to the fruiting body until wet, sterile water was used as controls. All the S. latifolia were maintained at 19±1℃, 85-100% relative humidity, and 18 h of light in the mushroom hothouse. Three days later, the inoculated fruiting bodies developed yellow color, and appear water-soaked, five days later, fruiting body gradually turn to soft and part turn to rot, seven days later, the fruiting body tissues completely turn into paste with a foul smell. The symptoms exhibited were similar to those of the original diseased fruiting bodies, while the control group remained healthy. The same bacterial were re-isolated from the infected fruiting bodies and subsequently identified by morphological characteristics and DNA sequenced. The pathogenicity test was conducted three times, each yielding similar results. The colonies of the pathogen are gram-negative rods, medium sized, convex, smooth, opaque, turning yellow after several days at a temperature 28℃. For molecular identification, the DNA of the representative three isolates was extracted using a Bacterial Genomic DNA Extraction Kit (Solarbio, Beijing). The 16S rRNA genes were amplified and sequenced with the primer 27F/1492R (Lane et al., 1985). Finally, the sequences were identical. The generated representative sequence was deposited in GenBank with accession number OR399122. BLASTn analysis showed 100% identity (1404/1404 bp) with previously deposited sequence (accession number CP068224) of S. multivorum FDAARGOS in GenBank. Based on the maximum likelihood method, phylogenetic analysis revealed 100% bootstrap support values with S. multivorum. Finally, the bacterium was identified as S. multivorum. This is the first report of S. multivorum causing bacterial rot of mushroom. The fruiting body of S. multivorum consists of multiple folded flat lobes, which are thin and have large surface area, may facilitate the infection of S. multivorum. Sphingobacterium sp. are named for their synthesize sphingolipids, which play an important role in bacterial infection (Kunz et al., 2019). These results will contribute to developing control strategies for this disease.

Open and closed microfluidics for biosensing.

Biosensing is vital for many areas like disease diagnosis, infectious disease prevention, and point-of-care monitoring. Microfluidics has been evidenced to be a powerful tool for biosensing via integrating biological detection processes into a palm-size chip. Based on the chip structure, microfluidics has two subdivision types: open microfluidics and closed microfluidics, whose operation methods would be diverse. In this review, we summarize fundamentals, liquid control methods, and applications of open and closed microfluidics separately, point out the bottlenecks, and propose potential directions of microfluidics-based biosensing.

Long-term use of etomidate disrupts the intestinal homeostasis and nervous system in mice.

Etomidate (ETO) is used as an anesthetic in surgery, but it is being abused in some populations. The damage caused by long-term intake of ETO to intestinal and brain functions is not yet clear, and it remains to be determined whether the drug affects the central nervous system through the gut-brain axis. This study aimed to investigate the neurotoxic and gastrointestinal effects of ETO at doses of 1 mg/kg and 3 mg/kg in mice over 14 consecutive days. The results showed that long-term injection of ETO led to drug resistance in mice, affecting their innate preference for darkness and possibly inducing dependence on ETO. The levels of 5-hydroxytryptamine in the brain, serum, and colon decreased by 37%, 51%, and 42% respectively, while the levels of γ-aminobutyric acid reduced by 38%, 52%, and 41% respectively. H&E staining revealed that ETO reduced goblet cells in the colon and damaged the intestinal barrier. The expression of tight junction-related genes Claudin4 and ZO-1 was downregulated. The intestinal flora changed, the abundance of Akkermansia and Lactobacillus decreased by 33% and 14%, respectively, while Klebsiella increased by 18%. TUNEL results showed that high-dose ETO increased apoptotic cells in the brain. The expression of Claudin1 in the brain was downregulated. Untargeted metabolomics analysis of the colon and brain indicated that ETO caused abnormalities in glycerophospholipid metabolism. Abnormal lipid metabolism might lead to the production or accumulation of lipotoxic metabolites, causing central nervous system diseases. ETO induced changes in the intestinal flora and metabolism, further affecting the central nervous system through the gut-brain axis. The study unveiled the detrimental effects on the brain and gastrointestinal system resulting from long-term intake of ETO, which holds significant implications for comprehending the adverse impact of ETO abuse on human health.

A Comprehensive Assessment of Ultraviolet-Radiation-Induced Mutations in Flammulina filiformis Using Whole-Genome Resequencing.

Nucleotide substitutions have played an important role in molecular evolution, and understanding their dynamics would contribute to genetic studies. Related research with defined DNA sequences lasted for decades until whole-genome sequencing arose. UV radiation (UVR) can generate base changes and other genetic variations in a short period of time, so it would be more meaningful to explore mutations caused by UVR from a genomic perspective. The monokaryon enoki strain WT583 was selected as the experimental material in this study because it can spontaneously produce large amounts of oidia on PDA plates, and the monokaryons originating from oidia have the same genotype as their mother monokaryon. After exposure to UV radiation, 100 randomly selected mutants, with WT583 as the reference genome, were sent for genome sequencing. BWA, samtools, and GATK software were employed for SNP calling, and the R package CMplot was used to visualize the distribution of the SNPs on the contigs of the reference genome. Furthermore, a k-mer-based method was used to detect DNA fragment deletion. Moreover, the non-synonymous genes were functionally annotated. A total of 3707 single-base substitutions and 228 tandem mutations were analyzed. The immediate adjacent bases showed different effects on the mutation frequencies of adenine and cytosine. For adenine, the overall effects of the immediate 5'-side and 3'-side bases were T > A > C > G and A > T > G > C, respectively; for cytosine, the overall effects of the immediate 5'-side and 3'-side bases were T > C > A > G and C > T > A > G, respectively. Regarding tandem mutations, the mutation frequencies of double-transition, double-transversion, 3'-side transition, and 5'-side transition were 131, 8, 72, and 17, respectively. Transitions at the 3'-side with a high mutation frequency shared a common feature, where they held transversions at the 5'-side of A→T or T→A without covalent bond changes, suggesting that the sequence context of tandem motifs might be related to their mutation frequency. In total, 3707 mutation sites were non-randomly distributed on the contigs of the reference genome. In addition, pyrimidines at the 3'-side of adenine promoted its transversion frequency, and UVR generated DNA fragment deletions over 200 bp with a low frequency in the enoki genome. The functional annotation of the genes with non-synonymous mutation indicated that UVR could produce abundant mutations in a short period of time.

Slow-wave sleep and REM sleep without atonia predict motor progression in Parkinson's disease.

BACKGROUND: Growing evidence supports the potential role of sleep in the motor progression of Parkinson's disease (PD). Slow-wave sleep (SWS) and rapid eye movement (REM) sleep without atonia (RWA) are important sleep parameters. The association between SWS and RWA with PD motor progression and their predictive value have not yet been elucidated. METHODS: We retro-prospectively analyzed clinical and polysomnographic data of 136 patients with PD. The motor symptoms were assessed using Unified Parkinson's Disease Rating Scale Part III (UPDRS III) at baseline and follow-up to determine its progression. Partial correlation analysis was used to explore the cross-sectional associations between slow-wave energy (SWE), RWA and clinical symptoms. Longitudinal analyses were performed using Cox regression and linear mixed-effects models. RESULTS: Among 136 PD participants, cross-sectional partial correlation analysis showed SWE decreased with the prolongation of the disease course (P = 0.046), RWA density was positively correlated with Hoehn & Yahr (H-Y) stage (tonic RWA, P < 0.001; phasic RWA, P = 0.002). Cox regression analysis confirmed that low SWE (HR = 1.739, 95% CI = 1.038-2.914; P = 0.036; FDR-P = 0.036) and high tonic RWA (HR = 0.575, 95% CI = 0.343-0.963; P = 0.032; FDR-P = 0.036) were predictors of motor symptom progression. Furthermore, we found that lower SWE predicted faster rate of axial motor progression (P < 0.001; FDR-P < 0.001) while higher tonic RWA density was associated with faster rate of rigidity progression (P = 0.006; FDR-P = 0.024) using linear mixed-effects models. CONCLUSIONS: These findings suggest that SWS and RWA might represent markers of different motor subtypes progression in PD.

Covalent Organic Frameworks with Tunable Chirality for Chiral-Induced Spin Selectivity.

Chiral covalent organic frameworks (CCOFs) have attracted extensive interest for their potential applications in various enantioselective processes. However, the exploitation of chirality-induced spin selectivity (CISS) that enables a new technology for the injection of spin polarized current without the need for a permanent magnetic layer within CCOFs remains a largely untapped area of research. Here, we demonstrate that, for the first time, COFs can be an attractive platform to develop spin filter materials with efficient CISS. This facilitates the design and synthesis of a new family of Zn(salen)-based 2D CCOFs, namely, CCOFs-9-12, by imine condensation of chiral 1,2-diaminocyclohexane and tri- or tetra(salicylaldehyde) derivatives. CCOF-9, distinguished by its unique C2 symmetric "armchair" tetrasubstituted pyrene conformation, exhibits the most pronounced chirality among these materials and serves as a solid-state host, enabling the enantioselective adsorption of racemic drugs with an enantiomeric excess (ee) of up to 97%. After substituting diamagnetic zinc(II) ions for paramagnetic cobalt(II), the resulting CCOF-9-Co not only retains its high crystallinity, porosity, and exceptional chirality but also exhibits enhanced conductivity, a crucial factor for the effective observation of CISS. Magnetic conductive atomic force microscopy showed that CCOF-9-Co exhibited a remarkable CISS effect with up to an 88-94% spin polarization ratio. This phenomenon is further confirmed by the increased intensity in the magnetic circular dichroism (MCD) when CCOF-9-Co is under an external magnetic field. This work therefore shows the tremendous potential of CCOFs for controlling spin selectivity and will stimulate the creation of new types of crystalline polymers with strong CISS effects for spin filters.

Comparative Transcriptome Analysis of Candidate Genes Associated with Mycelia Growth from a He-Ne Laser with Pulsed Light Mutant of Phellinus igniarius (Agaricomycetes).

A mutant Phellinus igniarius JQ9 with higher mycelial production was screened out by He-Ne laser with pulsed light irradiation, the mechanism underlying the higher mycelial production is still unknown. This study aims to obtain a comprehensive transcriptome assembly during the Ph. igniarius liquid fermentation and characterize the key genes associated with the mycelial growth and metabolism in Ph. igniarius JQ9. Our transcriptome data of Ph. iniarius JQ9 and the wild strain were obtained with the Illumina platform comparative transcriptome sequencing technology. The results showed that among all the 346 differentially expressed genes (DEGs), 245 were upregulated and 101 were downregulated. Candidate genes encoding endoglucanase, beta-glucosidase, cellulose 1,4-beta-cellobiosidase, glycoside hydrolase family 61 protein, were proposed to participate in the carbohydrate utilization from KEGG enrichment of the starch and sucrose metabolism pathways were upregulated in Ph. igniarius JQ9. In addition, three candidate genes encoding the laccase and another two candidate genes related with the cell growth were higher expressed in Ph. igniarius JQ9 than in the wild type of strain (CK). Analysis of these data revealed that increased these related carbohydrate metabolism candidate genes underlying one crucial way may cause the higher mycelia production.

Effects of heated-treating temperature on the stability and electrochemical performance of alginate-based multi-crosslinked biomembranes.

In this study, the organosilane nanoparticles as additive and crosslinker were prepared and incorporated into sodium alginate to fabricate a series of alginate-based multi-crosslinked biomembranes at different thermal treatment temperature without the usage of another crosslinking agent. The effects of treatment temperature on the stability of biomembranes including dimensional, oxidative, hydrolytic and mechanical stability were investigated in detail. As a whole, the stability of biomembranes exhibited increasing tendency with the increment of treatment temperature due to the formation of more compact internal network structure. The electrochemical performance of biomembranes in respect to their potential as proton exchange membranes for direct methanol fuel cell application were also investigated based on the treatment temperature. The results revealed that the biomembranes possessed excellent methanol resistance and the methanol diffusion coefficient decreased with the increment of treatment temperature. The biomembrane with 120 °C heat-treatment showed the optimal selectivity (14.30 × 105 Ss cm-3), which was about 1.77 and 68.10 times of that and of M-80 (8.09 × 105 Ss cm-3) and Nafion@117 (0.21 × 105 Ss cm-3), respectively. Fuel cell performance measurements showed that M-120 possessed higher maximum power density and cell stability compared with M-80 and Nafion@117, indicating its best adaptability for use in direct methanol fuel cell.

Circular olefin copolymers made de novo from ethylene and α-olefins.

Ethylene/α-olefin copolymers are produced in huge scale and widely used, but their after-use disposal has caused plastic pollution problems. Their chemical inertness made chemical re/upcycling difficult. Ideally, PE materials should be made de novo to have a circular closed-loop lifecycle. However, synthesis of circular ethylene/α-olefin copolymers, including high-volume, linear low-density PE as well as high-value olefin elastomers and block copolymers, presents a particular challenge due to difficulties in introducing branches while simultaneously installing chemical recyclability and directly using industrial ethylene and α-olefin feedstocks. Here we show that coupling of industrial coordination copolymerization of ethylene and α-olefins with a designed functionalized chain-transfer agent, followed by modular assembly of the resulting AB telechelic polyolefin building blocks by polycondensation, affords a series of ester-linked PE-based copolymers. These new materials not only retain thermomechanical properties of PE-based materials but also exhibit full chemical circularity via simple transesterification and markedly enhanced adhesion to polar surfaces.

First Report of Lecanicillium aphanocladii Causing Rot of Sparassis crispa in China.

Sparassis crispa, also known as cauliflower mushroom, is a new popularly edible mushroom in China, also a medicinal mushroom, which possesses various biological activities, such as immunopotentiation, anti-diabetes, anti-cancer, and anti-inflammatory effects. (Han et al., 2018). In recent years, the artificial cultivation of S. crispa has gained considerable public attention in China. In 2023, approximately 20% of S. crispa (about 0.05 ha of the planting area) showed obvious rot with white molds symptoms in mushroom hothouse, located in Shuangliu county, Sichuan province, China (GPS, 104°7'51"N, 30°25'2"E). Infected fruiting bodies were covered by white mycelia that later turned red or fuchsia. In the final stages of infection, the S. crispa fruiting bodies turned dark red or brown before rotting. The pathogen was isolated from the margin of the lesions by plating onto potato dextrose agar (PDA), and incubated at 25℃ in the dark for a week. Five pure culture fungal isolates were obtained. Collected isolates with similar morphology were described as Lecanicillium spp. (Zare et al., 2001). The colonies were raised, covered with white, the reverse side were violet brown, produced diffusing reddish-purple pigment. Conidiogenous cells produced singly, in pairs, verticillate or in dense irregular clusters on prostrate hyphae, at first flask-shaped, tapering into threadlike neck, with a size of 3.0-6.2×0.8-2.2 µm. Conidia were solitary, oval to subglobose, and 2.3-4.0×1.1-2.1 µm in size, similar to L. aphanocladii (Higo et al., 2021). For pathogenicity testing, ten fruiting bodies of S. crispa (planted in the bottles) were selected. Fungal cake of the isolate Bx-Ljb of L. aphanocladii were applied to the fruiting body of S. crispa, whereas pieces of sterile PDA medium were used as controls. All the bottles were incubated at 19±1℃, 85-100% relative humidity, and 18 h of light in the mushroom hothouse. A week later, the inoculated fruiting bodies developed brown spots and gradually expanding, with symptoms similar to the original diseased fruiting bodies. The controls remained healthy. The same fungus was reisolated from the infected fruiting bodies and subsequently identified by morphological characteristics and DNA sequence analysis. The pathogenicity test was repeated three times with similar results. For molecular identification, the DNA of the isolates was extracted using a Fungi Genomic DNA Extraction kit (Solarbio, Beijing). The SSU, LSU, and TEF1-α genes were amplified with the primer as previously described (Zhou et al., 2018). The generated sequences were deposited in GenBank with accession numbers OR206377, OR206378, and OR204702, respectively. BLASTn analyses showed >99.2% identity with previously deposited sequences of L. aphanocladii. Based on the maximum likelihood method, phylogenetic analysis revealed 99% bootstrap support values with L. aphanocladii. The fungus was identified as L. aphanocladii based on morphological and multilocus phylogenetic analyses. To our knowledge, there are two reports of L. aphanocladii on fruiting bodies of Tremella fuciformis and Morchella sextelata in China, and this is the first report of this fungus causing rot of S. crispa in China. It may be a reminder that the risk of L. aphanocladii in mushroom production in China is gradually increasing. These results will contribute to developing managemental strategies for this disease in S. crispa.

Programming Polarity Heterogeneity of Energy Storage Dielectrics by Bidirectional Intelligent Design.

Dielectric capacitors, characterized by ultra-high power densities, are considered as fundamental energy storage components in electronic and electrical systems. However, synergistically improving energy densities and efficiencies remains a daunting challenge. Understanding the role of polarity heterogeneity at the nanoscale in determining polarization response is crucial to the domain engineering of high-performance dielectrics. Here, a bidirectional design with phase-field simulation and machine learning is performed to forward reveal the structure-property relationship and reversely optimize polarity heterogeneity to improve energy storage performance. Taking BiFeO3-based dielectrics as typical systems, this work establishes the mapping diagrams of energy density and efficiency dependence on the volume fraction, size and configuration of polar regions. Assisted by CatBoost and Wolf Pack algorithms, this work analyzes the contributions of geometric factors and intrinsic features and find that nanopillar-like polar regions show great potential in achieving both high polarization intensity and fast dipole switching. Finally, a maximal energy density of 188 J cm-3 with efficiency above 95% at 8 MV cm-1 is obtained in BiFeO3-Al2O3 systems. This work provides a general method to study the influence of local polar heterogeneity on polarization behaviors and proposes effective strategies to enhance energy storage performance by tuning polarity heterogeneity.

Neurotoxic effects induced by flunitrazepam and its metabolites in zebrafish: Oxidative stress, apoptosis, and histone hypoacetylation.

Benzodiazepines (BZDs) have been widely detected in aquatic environments, but their neurotoxic effects and potential mechanisms are still unclear. This study focuses on flunitrazepam (FLZ) and its metabolite, 7-aminoflunitrazepam (7-FLZ), as representative psychotropic BZD. We investigated their neurotoxic effects on adult zebrafish following a 30-day exposure to environmentally relevant concentrations. The findings reveal that exposure to these drugs induces anxiety-like and aggressive behaviors in zebrafish. Additionally, notable morphological damage to brain tissue and mitochondrial structures was observed. Through TUNEL staining, an increase in apoptotic cells was detected in the brain tissue of the exposed group, accompanied by marked elevations in ROS and caspase-3/9 levels. The upregulation of apoptosis-related genes Bax, p53, and Bcl-2 confirmed the occurrence of apoptosis. Furthermore, exposure to the drugs resulted in decreased acetylation levels of brain histones H3 and H4. The upregulation of histone deacetylation enzyme genes (HDAC1, HDAC3, HDAC4, and HDAC6) supported this result. Molecular docking results suggest that compared to 7-FLZ, FLZ has a higher binding affinity with HDAC3 and HDAC4, explaining why it causes lower histone acetylation levels. This study in zebrafish elucidates the neurotoxicity and molecular mechanisms induced by FLZ and 7-FLZ, which is significant for further understanding the impact of BZDs on human health and assessing their ecological risks.

Targeting ferroptosis and ferritinophagy: new targets for cardiovascular diseases / 浙江大学学报（英文版）（B辑：生物医学和生物技术）

Cardiovascular diseases (CVDs) are a leading factor driving mortality worldwide. Iron, an essential trace mineral, is important in numerous biological processes, and its role in CVDs has raised broad discussion for decades. Iron-mediated cell death, namely ferroptosis, has attracted much attention due to its critical role in cardiomyocyte damage and CVDs. Furthermore, ferritinophagy is the upstream mechanism that induces ferroptosis, and is closely related to CVDs. This review aims to delineate the processes and mechanisms of ferroptosis and ferritinophagy, and the regulatory pathways and molecular targets involved in ferritinophagy, and to determine their roles in CVDs. Furthermore, we discuss the possibility of targeting ferritinophagy-induced ferroptosis modulators for treating CVDs. Collectively, this review offers some new insights into the pathology of CVDs and identifies possible therapeutic targets.