Reconstruction of Segmental Bone Defect in Canine Tibia Model Utilizing Bi-Phasic Scaffold: Pilot Study.

The reunion and restoration of large segmental bone defects pose significant clinical challenges. Conventional strategies primarily involve the combination of bone scaffolds with seeded cells and/or growth factors to regulate osteogenesis and angiogenesis. However, these therapies face inherent issues related to immunogenicity, tumorigenesis, bioactivity, and off-the-shelf transplantation. The biogenic micro-environment created by implanted bone grafts plays a crucial role in initiating the bone regeneration cascade. To address this, a highly porous bi-phasic ceramic synthetic bone graft, composed of hydroxyapatite (HA) and alumina (Al), was developed. This graft was employed to repair critical segmental defects, involving the creation of a 2 cm segmental defect in a canine tibia. The assessment of bone regeneration within the synthetic bone graft post-healing was conducted using scintigraphy, micro-CT, histology, and dynamic histomorphometry. The technique yielded pore sizes in the range of 230-430 µm as primary pores, 40-70 µm as secondary inner microchannels, and 200-400 nm as tertiary submicron surface holes. These three components are designed to mimic trabecular bone networks and to provide body fluid adsorption, diffusion, a nutritional supply, communication around the cells, and cell anchorage. The overall porosity was measured at 82.61 ± 1.28%. Both micro-CT imaging and histological analysis provided substantial evidence of robust bone formation and the successful reunion of the critical defect. Furthermore, an histology revealed the presence of vascularization within the newly formed bone area, clearly demonstrating trabecular and cortical bone formation at the 8-week mark post-implantation.

3D printing of thick myocardial tissue constructs with anisotropic myofibers and perfusable vascular channels.

Engineering of myocardial tissues has become a promising therapeutic strategy for treating myocardial infarction (MI). However, a significant challenge remains in generating clinically relevant myocardial tissues that possess native microstructural characteristics and fulfill the requirements for implantation within the human body. In this study, a thick 3D myocardial construct with anisotropic myofibers and perfusable branched vascular channels is created with clinically relevant dimensions using a customized beam-scanning stereolithography printing technique. To obtain tissue-specific matrix niches, a decellularized extracellular matrix microfiber-reinforced gelatin-based bioink is developed. The bioink plays a crucial role in facilitating the precise manufacturing of a hierarchical microstructure, enabling us to better replicate the physiological characteristics of the native myocardial tissue matrix in terms of structure, biomechanics, and bioactivity. Through the integration of the tailored bioink with our printing method, we demonstrate a biomimetic architecture, appropriate biomechanical properties, vascularization, and improved functionality of induced pluripotent stem cell-derived cardiomyocytes in the thick tissue construct in vitro. This work not only offers a novel and effective means to generate biomimetic heart tissue in vitro for the treatment of MI, but also introduces a potential methodology for creating clinically relevant tissue products to aid in other complex tissue/organ regeneration and disease model applications.

4D Thermo-Responsive Smart hiPSC-CM Cardiac Construct for Myocardial Cell Therapy.

Purpose: 4D fabrication techniques have been utilized for advanced biomedical therapeutics due to their ability to create dynamic constructs that can transform into desired shapes on demand. The internal structure of the human cardiovascular system is complex, where the contracting heart has a highly curved surface that changes shape with the heart's dynamic beating motion. Hence, 4D architectures that adjust their shapes as required are a good candidate to readily deliver cardiac cells into the damaged heart and/or to serve as self-morphing tissue scaffolds/patches for healing cardiac diseases. In this proof-of-concept in vitro study, a two-in-one 4D smart cardiac construct that integrates the functions of minimally invasive cell vehicles and in situ tissue patches was developed for repairing damaged myocardial tissue. Methods: For this purpose, a series of thermo-responsive 4D structures with different shapes and sizes were fabricated via the combination of fused deposition modeling (FDM)-printing and stamping molding. The thermo-responsive 4D constructs were firstly optimized to exhibit their shape transformation behavior at the designated temperature for convenient control. After which, the mechanical properties, shape recovery rate, and shape recovery speed of the 4D constructs at different temperatures were thoroughly evaluated. Also, the proliferation and functional prototype of human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) on the 4D constructs were quantified and evaluated using F-actin staining and immunostaining. Results: Our results showed that the 4D constructs possessed the desirable capability of shape-changing from spherical carriers to unfolded patches at human body temperature and exhibited excellent biocompatibility. Moreover, myocardial maturation in vitro with a uniform and printing pattern-specific cell distribution was observed on the surface of the unfolded 4D constructs. Conclusion: We successfully developed a 4D smart cardiac construct that integrates the functions of minimally invasive cell vehicles and in situ tissue patches for repairing damaged myocardial tissue.

3D printed biomimetic flexible blood vessels with iPS cell-laden hierarchical multilayers.

Successful recovery from vascular diseases has typically relied on the surgical repair of damaged blood vessels (BVs), with the majority of current approaches involving the implantation of autologous BVs, which is plagued by donor site tissue damage. Researchers have attempted to develop artificial vessels as an alternative solution to traditional approaches to BV repair. However, the manufacturing of small-diameter (< 6 mm) BVs is still considered one of the biggest challenges due to its difficulty in the precise fabrication and the replication of biomimetic architectures. In this study, we successfully developed 3D printed flexible small-diameter BVs that consist of smooth muscle cells and a vascularized endothelium. In the developed artificial BV, a rubber-like elastomer was printed as the outermost layer of the vessel, which demonstrated enhanced mechanical properties, while and human induced pluripotent stem cell (iPSC)-derived vascular smooth muscle cells (iSMCs) and endothelial cells (iECs) embedded fibrinogen solutions were coaxially extruded with thrombin solution to form cell-laden fibrin gel inner layers. Our results showed that the 3D BVs possessed proper mechanical properties, and the cells in the fibrin layers substantially proliferated over time to form a stable BV construct. Our study demonstrated that the 3D printed flexible small-diameter BV using iPSCs could be a promising platform for the treatment of vascular diseases.

An in vitro analysis of the effect of geometry-induced flows on endothelial cell behavior in 3D printed small-diameter blood vessels.

Clinical recovery from vascular diseases has increasingly become reliant upon the successful fabrication of artificial blood vessels (BVs) or vascular prostheses due to the shortage of autologous vessels and the high incidence of vessel graft diseases. Even though many attempts at the clinical implementation of large artificial BVs have been reported to be successful, the development of small-diameter BVs remains one of the significant challenges due to the limitation of micro-manufacturing capacity in complexity and reproducibility, as well as the development of thrombosis. The present study aims to develop 3D printed small-diameter artificial BVs that recapitulate the longitudinal geometric elements in the native BVs using biocompatible polylactic acid (PLA). As their intrinsic physical properties are crystallinity dependent, we used two PLA filaments with different crystallinity to investigate the suitability of their physical properties in the micro-manufacturing of BVs. To explore the mechanism of venous thrombosis, our study provided a preliminarily comparative analysis of the effect of geometry-induced flows on the behavior of human endothelial cells (ECs). Our results showed that the adhered healthy ECs in the 3D printed BV exhibited regulated patterns, such as elongated and aligned parallel to the flow direction, as well as geometry-induced EC response mechanisms that are associated with hemodynamic shear stresses. Furthermore, the computational fluid dynamics simulation results provided insightful information to predict velocity profile and wall shear stress distribution in the geometries of BVs in accordance with their spatiotemporally-dependent cell behaviors. Our study demonstrated that 3D printed small-diameter BVs could serve as suitable candidates for fundamental BV studies and hold great potential for clinical applications.

4D printing in biomedical applications: emerging trends and technologies.

Nature's material systems during evolution have developed the ability to respond and adapt to environmental stimuli through the generation of complex structures capable of varying their functions across direction, distances and time. 3D printing technologies can recapitulate structural motifs present in natural materials, and efforts are currently being made on the technological side to improve printing resolution, shape fidelity, and printing speed. However, an intrinsic limitation of this technology is that printed objects are static and thus inadequate to dynamically reshape when subjected to external stimuli. In recent years, this issue has been addressed with the design and precise deployment of smart materials that can undergo a programmed morphing in response to a stimulus. The term 4D printing was coined to indicate the combined use of additive manufacturing, smart materials, and careful design of appropriate geometries. In this review, we report the recent progress in the design and development of smart materials that are actuated by different stimuli and their exploitation within additive manufacturing to produce biomimetic structures with important repercussions in different but interrelated biomedical areas.

Recent advances in bioprinting technologies for engineering cardiac tissue.

Annually increasing incidence of cardiac-related disorders and cardiac tissue's minimal regenerative capacity have motivated the researchers to explore effective therapeutic strategies. In the recent years, bioprinting technologies have witnessed a great wave of enthusiasm and have undergone steady advancements over a short period, opening the possibilities for recreating engineered functional cardiac tissue models for regenerative and diagnostic applications. With this perspective, the current review delineates recent developments in the sphere of engineered cardiac tissue fabrication, using traditional and advanced bioprinting strategies. The review also highlights different printing ink formulations, available cellular opportunities, and aspects of personalized medicines in the context of cardiac tissue engineering and bioprinting. On a concluding note, current challenges and prospects for further advancements are also discussed.

3D printing novel in vitro cancer cell culture model systems for lung cancer stem cell study.

Two-dimensional (2D) in vitro cell cultures and laboratory animals have been used traditionally as the gold-standard preclinical cancer model systems. However, for cancer stem cell (CSC) studies, they exhibit notable limitations on simulating native environment, which depreciate their translatability for clinical development purposes. In this study, different three-dimensional (3D) printing platforms were used to establish novel 3D cell cultures enriched in CSCs from non-small cell lung cancer (NSCLC) patients and cell lines. Rigid scaffolds with an elevated compressive modulus and uniform pores and channels were produced using different filaments. Hydrogel-based scaffolds were printed with a more irregular distribution of pores and a lower compressive modulus. As a 3D model of reference, suspension spheroid cultures were established. Therein, cancer cell lines exhibited enhanced proliferation profiles on rigid scaffolds compared to the same cells grown on either hydrogel scaffolds or tumor spheres. Meanwhile, primary cancer cells grew considerably better on hydrogel scaffolds or in tumor sphere culture, compared to cells grown on rigid scaffolds. Gene expression analysis confirmed that tumor spheres and cells seeded on hydrogel scaffolds significantly overexpress most of stemness and invasion promoters tested compared to control cells grown in 2D culture. A different phenomenon was observed within cells growing on the rigid scaffolds, where fewer significant variations in gene expression were detected. Our findings provide strong evidence for the advantageous usage of 3D printed models, especially those which use GelMA-PEGDA hydrogels as the primary scaffold material, for studying lung CSCs. The results demonstrated that the 3D printed scaffolds were better to mimic tumor complexity and regulate cancer cell behavior than in vivo 2D culture models.

Dual 3D printing for vascularized bone tissue regeneration.

The development of sufficient vascular networks is crucial for the successful fabrication of tissue constructs for regenerative medicine, as vascularization is essential to perform the metabolic functions of tissues, such as nutrient transportation and waste removal. In recent years, efforts to 3D print vascularized bone have gained substantial attention, as bone disorders and defects have a marked impact on the older generations of society. However, conventional and previous 3D printed bone studies have been plagued by the difficulty in obtaining the nanoscale geometrical precision necessary to recapitulate the distinct characteristics of natural bone. Additionally, the process of developing truly biomimetic vascularized bone tissue has been historically complex. In this study, a biomimetic nano-bone tissue construct with a perfusable, endothelialized vessel channel was developed using a combination of simple stereolithography (SLA) and fused deposition modeling (FDM) 3D printing systems. The perfusable vessel channel was created within the SLA printed bone scaffold using an FDM printed polyvinyl alcohol (PVA) sacrificial template. Within the fabricated constructs, bone tissue was formed through the osteogenic differentiation of human bone marrow mesenchymal stem cells (hMSCs), and distinct capillaries sprouted through the angiogenesis of the endothelialized vessel channel after human umbilical vein endothelial cells (HUVECs) had been perfused throughout. Furthermore, the fabricated constructs were evaluated in physiologically relevant culture conditions to predict tissue development after implantation in the human body. The experimental results revealed that the custom-designed bioreactor with an hMSC-HUVEC co-culture system enhanced the formation of vascular networks and the osteogenic maturation of the constructs for up to 20 days of observation.

4D Printed Cardiac Construct with Aligned Myofibers and Adjustable Curvature for Myocardial Regeneration.

As an innovative additive manufacturing process, 4D printing can be utilized to generate predesigned, self-assembly structures which can actuate time-dependent, and dynamic shape-changes. Compared to other manufacturing techniques used for tissue engineering purposes, 4D printing has the advantage of being able to fabricate reprogrammable dynamic tissue constructs that can promote uniform cellular growth and distribution. For this study, a digital light processing (DLP)-based printing technique was developed to fabricate 4D near-infrared (NIR) light-sensitive cardiac constructs with highly aligned microstructure and adjustable curvature. As the curvature of the heart is varied across its surface, the 4D cardiac constructs can change their shape on-demand to mimic and recreate the curved topology of myocardial tissue for seamless integration. To mimic the aligned structure of the human myocardium and to achieve the 4D shape change, a NIR light-sensitive 4D ink material, consisting of a shape memory polymer and graphene, was created to fabricate microgroove arrays with different widths. The results of our study illustrate that our innovative NIR-responsive 4D constructs exhibit the capacity to actuate a dynamic and remotely controllable spatiotemporal transformation. Furthermore, the optimal microgroove width was discovered via culturing human induced pluripotent stem cell-derived cardiomyocytes and mesenchymal stem cells onto the constructs' surface and analyzing both their cellular morphology and alignment. The cell proliferation profiles and differentiation of tricultured human-induced pluripotent stem cell-derived cardiomyocytes, mesenchymal stem cells, and endothelial cells, on the printed constructs, were also studied using a Cell Counting Kit-8 and immunostaining. Our results demonstrate a uniform distribution of aligned cells and excellent myocardial maturation on our 4D curved cardiac constructs. This study not only provides an efficient method for manufacturing curved tissue architectures with uniform cell distributions, but also extends the potential applications of 4D printing for tissue regeneration.

3D Bioprinting-Tunable Small-Diameter Blood Vessels with Biomimetic Biphasic Cell Layers.

Blood vessel damage resulting from trauma or diseases presents a serious risk of morbidity and mortality. Although synthetic vascular grafts have been successfully commercialized for clinical use, they are currently only readily available for large-diameter vessels (>6 mm). Small-diameter vessel (<6 mm) replacements, however, still present significant clinical challenges worldwide. The primary objective of this study is to create novel, tunable, small-diameter blood vessels with biomimetic two distinct cell layers [vascular endothelial cell (VEC) and vascular smooth muscle cell (VSMC)] using an advanced coaxial 3D-bioplotter platform. Specifically, the VSMCs were laden in the vessel wall and VECs grew in the lumen to mimic the natural composition of the blood vessel. First, a novel bioink consisting of VSMCs laden in gelatin methacryloyl (GelMA)/polyethylene(glycol)diacrylate/alginate and lyase was designed. This specific design is favorable for nutrient exchange in an ambient environment and simultaneously improves laden cell proliferation in the matrix pore without the space restriction inherent with substance encapsulation. In the vessel wall, the laden VSMCs steadily grew as the alginate was gradually degraded by lyase leaving more space for cell proliferation in matrices. Through computational fluid dynamics simulation, the vessel demonstrated significantly perfusable and mechanical properties under various flow velocities, flow viscosities, and temperature conditions. Moreover, both VSMCs in the scaffold matrix and VECs in the lumen steadily proliferated over time creating a significant two-cell-layered structure. Cell proliferation was confirmed visually through staining the markers of alpha-smooth muscle actin and cluster of differentiation 31, commonly tied to angiogenesis phenomena, in the vessel matrices and lumen, respectively. Furthermore, the results were confirmed quantitatively through gene analysis which suggested good angiogenesis expression in the blood vessels. This study demonstrated that the printed blood vessels with two distinct cell layers of VECs and VSMCs could be potential candidates for clinical small-diameter blood vessel replacement applications.

Three-Dimensional Printing Biologically Inspired DNA-Based Gradient Scaffolds for Cartilage Tissue Regeneration.

Cartilage damage caused by aging, repeated overloading, trauma, and diseases can result in chronic pain, inflammation, stiffness, and even disability. Unlike other types of tissues (bone, skin, muscle, etc.), cartilage tissue has an extremely weak regenerative capacity. Currently, the gold standard surgical treatment for repairing cartilage damage includes autografts and allografts. However, these procedures are limited by insufficient donor sources and the potential for immunological rejection. After years of development, engineered tissue now provides a valuable artificial replacement for tissue regeneration purposes. Three-dimensional (3D) bioprinting technologies can print customizable hierarchical structures with cells. The objective of the current work was to prepare a 3D-printed three-layer gradient scaffold with lysine-functionalized rosette nanotubes (RNTK) for improving the chondrogenic differentiation of adipose-derived mesenchymal stem cells (ADSCs). Specifically, biologically inspired RNTKs were utilized in our work because they have unique surface chemistry and biomimetic nanostructure to improve cell adhesion and growth. Different ratios of gelatin methacrylate (GelMA) and poly(ethylene glycol) diacrylate (PEGDA) were printed into a three-layer GelMA-PEGDA gradient scaffold using a stereolithography-based printer, followed by coating with RNTKs. The pores and channels (∼500 µm) were observed in the scaffold. It was found that the population of ADSCs on the GelMA-PEGDA-RNTK scaffold increased by 34% compared to the GelMA-PEGDA scaffold (control). Moreover, after 3 weeks of chondrogenic differentiation, collagen II, glycosaminoglycan, and total collagen synthesis on the GelMA-PEGDA-RNTK scaffold significantly respectively increased by 59%, 71%, and 60%, as compared to the control scaffold. Gene expression of collagen II α1, SOX 9, and aggrecan in the ADSCs growing on the GelMA-PEGDA-RNTK scaffold increased by 79%, 52%, and 47% after 3 weeks, compared to the controls, respectively. These results indicated that RNTKs are a promising type of nanotubes for promoting chondrogenic differentiation, and the present 3D-printed three-layer gradient GelMA-PEGDA-RNTK scaffold shows considerable promise for future cartilage repair and regeneration.

4D physiologically adaptable cardiac patch: A 4-month in vivo study for the treatment of myocardial infarction.

There has been considerable progress in engineering cardiac scaffolds for the treatment of myocardial infarction (MI). However, it is still challenging to replicate the structural specificity and variability of cardiac tissues using traditional bioengineering approaches. In this study, a four-dimensional (4D) cardiac patch with physiological adaptability has been printed by beam-scanning stereolithography. By combining a unique 4D self-morphing capacity with expandable microstructure, the specific design has been shown to improve both the biomechanical properties of the patches themselves and the dynamic integration of the patch with the beating heart. Our results demonstrate improved vascularization and cardiomyocyte maturation in vitro under physiologically relevant mechanical stimulation, as well as increased cell engraftment and vascular supply in a murine chronic MI model. This work not only potentially provides an effective treatment method for MI but also contributes a cutting-edge methodology to enhance the structural design of complex tissues for organ regeneration.

Integrating cold atmospheric plasma with 3D printed bioactive nanocomposite scaffold for cartilage regeneration.

The progressive degeneration of articular cartilage or osteoarthritis of the knee is a serious clinical problem affecting patient quality of life. In recent years, artificially engineered cartilage scaffolds have been widely studied as a promising method to stimulate cartilage regeneration. In this study, a novel biomimetic cartilage scaffold was developed by integrating a cold atmospheric plasma (CAP) treatment with prolonged release of bioactive factors. Specifically, a surface of 3D printed hydrogel scaffold with drug-loaded nanoparticles was treated with CAP. Our results showed that the scaffolds with CAP treatment can improve hydrophilicity as well as surface nano-roughness and can thus facilitate stem cell adhesion. More importantly, this study demonstrated that integrating CAP treatment with drug-loaded nanoparticles can synergistically enhance chondrogenesis of human bone marrow mesenchymal stem cells when compared to control scaffolds. The results in this study indicate the great potential of applying CAP and drug-loaded nanoparticles into 3D printed tissue scaffolds for promoting cartilage regeneration.

4D Self-Morphing Culture Substrate for Modulating Cell Differentiation.

As the most versatile and promising cell source, stem cells have been studied in regenerative medicine for two decades. Currently available culturing techniques utilize a 2D or 3D microenvironment for supporting the growth and proliferation of stem cells. However, these culture systems fail to fully reflect the supportive biological environment in which stem cells reside in vivo, which contain dynamic biophysical growth cues. Herein, a 4D programmable culture substrate with a self-morphing capability is presented as a means to enhance dynamic cell growth and induce differentiation of stem cells. To function as a model system, a 4D neural culture substrate is fabricated using a combination of printing and imprinting techniques keyed to the different biological features of neural stem cells (NSCs) at different differentiation stages. Results show the 4D culture substrate demonstrates a time-dependent self-morphing process that plays an essential role in regulating NSC behaviors in a spatiotemporal manner and enhances neural differentiation of NSCs along with significant axonal alignment. This study of a customized, dynamic substrate revolutionizes current stem cell therapies, and can further have a far-reaching impact on improving tissue regeneration and mimicking specific disease progression, as well as other impacts on materials and life science research.

Touch-Spun Nanofibers for Nerve Regeneration.

In the current study, we examined the potential for neural stem cell (NSCs) proliferation on novel aligned touch-spun polycaprolactone (PCL) nanofibers. Electrospun PCL nanofibers with similar diameter and alignment were used as a control. Confocal microscopy images showed that NSCs grew and differentiated all over the scaffolds up to 8 days. Neurite quantification analysis revealed that the NSCs cultured on the touch-spun fibers with incorporated bovine serum albumin promoted the expression of neuron-specific class III ß-tubulin after 8 days. More importantly, NSCs grown on the aligned touch-spun PCL fibers exhibited a bipolar elongation along the direction of the fiber, while NSCs cultured on the aligned electrospun PCL fibers expressed a multipolar elongation. The structural characteristics of the PCL nanofibers analyzed by X-ray diffraction indicated that the degree of crystallinity and elastic modulus of the touch-spun fiber are significantly higher than those of electrospun fibers. These findings indicate that the aligned and stiff touch-spun nanofibrous scaffolds show considerable potential for nerve injury repair.

Engineering a Novel 3D Printed Vascularized Tissue Model for Investigating Breast Cancer Metastasis to Bone.

Cancer metastases are a challenge for cancer treatment due to their organ specificity and pathophysiological complexity. Engineering 3D in vitro models capable of replicating native cancer dissemination can significantly improve the understanding of cancer biology and can help to guide the development of more effective treatments. In order to better mimic the behavior of native cancer, a triculture metastatic model is created using a stereolithography printing technique with optimized inks for investigating the invasion of breast cancer (BrCa) cells into vascularized bone tissue. The printed system allows to study transendothelial migration and the colony-forming behavior of metastatic BrCa cells. The key steps of BrCa cell progression including expansion, migration, and colonization are continuously monitored and the interactions between cancer cells, vascular cells, and bone cells are systematically investigated. The study results demonstrate that the 3D printed tissue construct by incorporating multiple cells and various favorable ink matrices provides a suitable model to study the interaction between these cells in a complex vascular microenvironment. As such, the 3D printed tricultured model may serve as a valuable tool for studying metastatic breast cancer progression in bone.

Recent advances in 3D printing: vascular network for tissue and organ regeneration.

Over the past years, the fabrication of adequate vascular networks has remained the main challenge in engineering tissues due to technical difficulties, while the ultimate objective of tissue engineering is to create fully functional and sustainable organs and tissues to transplant in the human body. There have been a number of studies performed to overcome this limitation, and as a result, 3D printing has become an emerging technique to serve in a variety of applications in constructing vascular networks within tissues and organs. 3D printing incorporated technical approaches allow researchers to fabricate complex and systematic architecture of vascular networks and offer various selections for fabrication materials and printing techniques. In this review, we will discuss materials and strategies for 3D printed vascular networks as well as specific applications for certain vascularized tissue and organ regeneration. We will also address the current limitations of vascular tissue engineering and make suggestions for future directions research may take.

A novel near-infrared light responsive 4D printed nanoarchitecture with dynamically and remotely controllable transformation.

Four-dimensional (4D) printing is an emerging and highly innovative additive manufacturing process by which to fabricate pre-designed, self-assembly structures with the ability to transform over time. However, one of the critical challenges of 4D printing is the lack of advanced 4D printing systems that not only meet all the essential requirements of shape change but also possess smart, dynamic capabilities to spatiotemporally and instantly control the shape-transformation process. Here, we present a facile 4D printing platform which incorporates nanomaterials into the conventional stimuli-responsive polymer, allowing the 4D printed object to achieve a dynamic and remote controlled, on-time and position shape transformation. A proof-of-concept 4D printed brain model was created using near-infrared light (NIR) responsive nanocomposite to evaluate the capacity for controllable 4D transformation, and the feasibility of photothermal stimulation for modulating neural stem cell behaviors. This novel 4D printing strategy can not only be used to create dynamic 3D patterned biological structures that can spatiotemporally control their shapes or behaviors of transformation under a human benign stimulus (NIR), but can also provide a potential method for building complex self-morphing objects for widespread applications.