Mechanisms of inactivation of HSV-2 during storage in frozen and lyophilized forms.

The structural integrity of herpes simplex virus 2 (HSV-2) during freezing, thawing, and lyophilization has been studied using scanning and transmission electron microscopy. Viral particles should be thawed quickly from -80 to 37 degrees C to avoid artifacts of thawing. To avoid freezing damage, the virus should be rapidly frozen (>20 K s(-1)) rather than slowly frozen as occurs on the shelf of a lyophilizer (<1 K s(-1)). Fast freezing and thawing allows six cycles of freeze thaw with no loss of viral titer TCID50. Viral particles were characterized using immunogold labeling methods. Freshly thawed virus had 19 +/- 4 polyclonal immunogold particles virus(-1); virus stored at -80 degrees C for at least 4 months had 17 +/- 3 particles virus(-1); virus stored for 1 week at 4 degrees C had 8 +/- 4 particles virus(-1). By bulk lyophilization the number of particles was 4 +/- 4, but by fast freezing and lyophilization the number of gold particles improved to 12 +/- 5. The loss of viral membrane was directly observed, and the in vitro loss was demonstrated to occur through three possible pathways, including (i) simultaneous release of tegument and membrane, (ii) sequential release of membrane and then tegument, and (iii) release like by in vivo infection. The capsids were not further degraded as indicated by the lack of free DNA, which was only released by boiling the viral samples with 1% SDS, followed by a dilution to 0.001% w/v SDS for the real-time PCR reaction.

Interaction between an amantadine analogue and the transmembrane portion of the influenza A M2 protein in liposomes probed by 1H NMR spectroscopy of the ligand.

1H NMR spectroscopy of a fluoroamantadine ligand was used to probe the pH dependence of binding to the transmembrane peptide fragment of the influenza A M2 proton channel (M2TM) incorporated into 1,2-dimyristoyl-sn-glycero-3-phosphocholine liposomes. Above pH 7.5, when M2TM bound the ligand, fluoroamantadine resonances became too broad to be detected. Fluoroamantadine interacted weakly with the liposomes, indicating it may first bind to the bilayer and then block target channels after diffusion across the membrane surface.

Effect of freezing rates and excipients on the infectivity of a live viral vaccine during lyophilization.

Lyophilization is the most popular method for achieving improved stability of labile biopharmaceuticals, but a significant fraction of product activity can be lost during processing due to stresses that occur in both the freezing and the drying stages. The effect of the freezing rate on the recovery of herpes simplex virus 2 (HSV-2) infectivity in the presence of varying concentrations of cryoprotectant excipients is reported here. The freezing conditions investigated were shelf cooling (223 K), quenching into slush nitrogen (SN2), and plunging into melting propane cooled in liquid nitrogen (LN2). The corresponding freezing rates were measured, and the ice crystal sizes formed within the samples were determined using scanning electron microscopy (SEM). The viral activity assay demonstrated the highest viral titer recovery for nitrogen cooling in the presence of low (0.25% w/v sucrose) excipient concentration. The loss of viral titer in the sample cooled by melting propane was consistently the highest among those results from the alternative cooling methods. However, this loss could be minimized by lyophilization at lower temperature and higher vacuum conditions. We suggest that this is due to a higher ratio of ice recrystallization for the sample cooled by melting propane during warming to the temperature at which freeze-drying was carried out, as smaller ice crystals readily enlarge during warming. Under the same freezing condition, a higher viral titer recovery was obtained with a formulation containing a higher concentration of sugar excipients. The reason was thought to be twofold. First, sugars stabilize membranes and proteins by hydrogen bonding to the polar residues of the biomolecules, working as a water substitute. Second, the concentrated sugar solution lowers the nucleation temperature of the water inside the virus membrane and prevents large ice crystal formation within both the virus and the external medium.

Hydrogen/deuterium exchange of hydrophobic peptides in model membranes by electrospray ionization mass spectrometry.

We demonstrate here that the hydrogen/deuterium solvent exchange (HDX) properties of the transmembrane fragment of the M2 protein of Influenza A (M2-TM) incorporated into lipid vesicles or detergent micelles can be studied with straightforward electrospray (ESI) and nanospray mass spectrometry (MS) configurations provided that key factors, including sample preparation techniques, are optimized. Small unilamellar vesicle preparations were obtained by solubilizing dimyristoyl phosphatidylcholine (DMPC) and the M2-TM peptide in aqueous solution with n-octyl-beta-D-glycopyranoside, followed by dialysis to remove the detergent. Electron microscopy experiments revealed that subsequent concentration by centrifugation introduced large multilamellar aggregates that were not compatible with ESI-MS. By contrast, a lyophilization-based concentration procedure, followed by thawing above the liquid crystal transition temperature of the lipid component, maintained the liposome size profile and yielded excellent ion fluxes in both ESI-MS and nano-ESI-MS. Using these methods the global HDX profile of M2-TM in aqueous DMPC vesicles was compared with that in methanol, demonstrating that several amide sites were protected from exchange by the lipid membrane. We also show that hydrophobic peptides can be detected by ESI-MS in the presence of a large molar excess of the detergent Triton X-100. The rate of HDX of M2-TM in Triton X-100 micelles was faster than that in DMPC vesicles but slower than when the peptide had been denatured in methanol. These results indicate that the accessibility of backbone amide sites to the solvent can be profoundly affected by membrane protein structure and dynamics, as well as the properties of model bilayer systems.