ABSTRACT
In the last decade, laser Ablation technique (Nd:YAG) has been considered as a perfect method for producing nanostructures with high purity. In the present study, Titanium diboride nanoparticles (TiB2 NPs) have been deposited on Aluminum (Al) and their micromorphology and microstructural properties have been investigated. The synthesis of TiB2 NPs has been carried out by the Laser Ablation technique (Nd:YAG) which has not been reported so far. Moreover, the effects of laser energy on improving the synthesis of TiB2 NPs have been examined. In this regard, five samples of TiB2 NPs were prepared by Laser Ablation method in different values of laser fluency in the range of 0.4-1.2 J/cm2 . The structural properties of prepared nanoparticles were detected by grazing incidence X-ray diffraction, transmission electron microscopy, and energy dispersive X-ray spectroscopy. The morphology of samples was also investigated by field effect scanning electron microscopy. The results demonstrate the formation of spherical nanoparticles in all samples. Based on the results of the GIXRD patterns, pulsed laser energy is an effective parameter for the size of ablated nanoparticles. As can be seen, increasing the energy of laser beam decreases the average size of nanoparticles from 79.41 to 4 nm. As the next step, the as-prepared nanoparticles were deposited on Aluminum substrate with electrophoretic deposition technique at constant applied voltage (30 Volt) and constant deposition time (30 min). The X-ray diffraction pattern of TiB2 NPs deposited onto Al substrate confirmed the formation of the TiB2 thin films on all Al substrates. Also, the roughness and average particle size of deposited films were measured by atomic force microscopy images and MountainsMap® Premium software. Increasing the fluency of laser beam made the surface more irregular and the maximum value of fractal dimension and hence, the most irregular topography has been observed in the sample produced by maximum laser fluency. RESEARCH HIGHLIGHTS: Titanium diboride nanoparticles have been synthesized by the laser ablation technique. The effects of laser energy on improving the synthesis of TiB2 NPs have been investigated. The micromorphology of samples have been investigated by analyzing AFM and SEM images.
ABSTRACT
In the present study, laser ablation technique (Nd:YAG) has been applied to synthesize platinum nanoparticles (NPs). Also, the effect of applied electric field on the physical, structural, and morphological properties of Pt NPs has been investigated during the nanosecond pulsed laser ablation of platinum. Based on the results extracted from TEM and scanning electron microscopy images, the formation of high percentage of NPs with spherical shape is demonstrated in all samples. The increase of applied electric field creates few rectangular, hexagonal, and rhombic NPs with the average size decreased from 20 to 9 nm. The significant influence of increasing electric field is also observed in UV-vis spectra by appearing the blue shift of the localized surface plasmon resonance peak. The UV-vis spectra also confirm the metallic nature of Pt NPs and the existence of inhomogeneous-sized particles and the coagulation of particle because of the long tail in higher wavelengths. In addition, atomic force microscopy images have been analyzed through MountainsMap Premium program and fractal dimension. As can be seen, increasing the applied electric field make the surface more irregular and the maximum value of Df reveals the most irregular topography for sample with 50 V/cm electric field. Finally, the bending and stretching frequencies of the functional bending groups connected to the NPs surface have been characterized by Fourier transform infrared spectroscopy. Electrical field-assisted laser ablation in liquids method allows a better control of the size, morphology, structure, and chemical composition of nanoparticles.
ABSTRACT
Human tooth exhibits a structure of a mixture of inorganic hydroxyapatite nanocrystals and organic phases. The aim of this study is to investigate different tissues of human canine teeth surface along with the micro structure parameters of each tissue. X-ray diffraction (XRD) is used to study the amorphous or crystalline nature of each tissue with different mineral compositions and crystalline structures where the highest crystalline quality is related to enamel. The surfaces are also examined by energy-dispersive X-ray spectrometry. Moreover, crystalline quality factor is carried out to estimate the crystallinity of the tissues. Also, based on the basic Scherrer equation, the Williamson-Hall equation is applied to extend the formula for the XRD. Enamel and cementum tissues of a typical human tooth, which look similar, are composed of a large variety of wide lines with different widths through Raman spectra analysis. In addition, the applied scanning electron microscopy extracts similar morphology for all tissues with round granular structures which are denser in the cementum. Atomic force microscopy is finally used for investigation of micro-morphologies of the different tissues and the results are compared with the fractal analysis which ends to the bifractal and anisotropic nature of enamel and cementum along with monofractal and isotropic nature of dentin.
Subject(s)
Cuspid/physiology , Cuspid/ultrastructure , Dental Cementum/ultrastructure , Dental Enamel/ultrastructure , Fractals , Humans , Microscopy, Atomic Force , Microscopy, Electron, Scanning , Spectrometry, X-Ray Emission , Spectrum Analysis, Raman , X-Ray DiffractionABSTRACT
A beam shaping technique that rearranges the beam for improving the beam symmetry and power density of a ten-bar high power diode laser stack is simulated considering a stripe mirror plate and a V-Stack mirror in the beam shaping system. In this technique, the beam of a high power diode laser stack is effectively coupled into a standard 550 µm core diameter and a NA=0.22 fiber. By this technique, compactness, higher efficiency, and lower cost production of the diode are possible.
