Optimization of Cohesive Parameters in the Interfacial Transition Zone of Rubberized Concrete Based on the Response Surface Method.

Rubber concrete has been applied to a certain extent in fatigue-resistant structures due to its good durability. Based on a cohesive model of rubber composed of a five-phase material containing mortar, aggregate, rubber, aggregate-mortar interfacial transition zone (ITZ), and rubber-mortar ITZ, this paper studies the influence of the cohesive parameters in the rubber-mortar ITZ on the fatigue problem of rubber concrete on the mesoscopic scale. As the weak part of cement-based composite materials, the ITZ has a great influence on the mechanical properties and durability of concrete, but the performance of the ITZ is difficult to test in macro experiments, resulting in difficulties in determining its simulation parameters. Based on the cohesive model with a rubber content of 5%, this study uses Monofactor analysis and the Plackett-Burman test to quickly and effectively determine the primary and secondary influences of the cohesive model parameters in the rubber-mortar ITZ; further, the response surface method is used to optimize the cohesive parameters in the rubber-mortar ITZ, and the numerical simulation results after optimizing the cohesive parameters are compared and analyzed with the simulation results before optimization. The results show that, under the setting of the optimized parameters, the simulation results of each item of the optimal cohesive model parameters in the rubber-mortar ITZ are in line with the reality and closer to the experimental data, and they are also applicable to rubber concrete models with different rubber dosing.

Numerical Simulation of the Effect of Freeze-Thaw Cycles on the Axial Compression Strength of Rubber Concrete.

The incorporation of rubber can enhance concrete's durability and effectively reduce the damage caused by freeze-thaw cycling (FTC). Still, there has been only limited research on the damage mechanism of RC at the fine view level. To gain insight into the expansion process of uniaxial compression damage cracks in rubber concrete (RC) and summarize the internal temperature field distribution law during FTC, a fine RC thermodynamic model containing mortar, aggregate, rubber, water, and interfacial transition zone (ITZ) is established in this paper, and the cohesive element is selected for the ITZ part. The model can be used to study the mechanical properties of concrete before and after FTC. The validity of the calculation method was verified by comparing the calculated results of the compressive strength of concrete before and after FTC with the experimental results. On this basis, this study analyzed the compressive crack extension and internal temperature distribution of RC at 0, 5, 10, and 15% replacement rates before and after 0, 50, 100, and 150 cycles of FTC. The results showed that the fine-scale numerical simulation method can effectively reflect the mechanical properties of RC before and after FTC, and the computational results verify the applicability of the method to rubber concrete. The model can effectively reflect the uniaxial compression cracking pattern of RC before and after FTC. Incorporating rubber can impede temperature transfer and reduce the compressive strength loss caused by FTC in concrete. The FTC damage to RC can be reduced to a greater extent when the rubber incorporation is 10%.

Numerical Simulation of Fatigue Life of Rubber Concrete on the Mesoscale.

Rubber concrete (RC) exhibits high durability due to the rubber admixture. It is widely used in a large number of fatigue-resistant structures. Mesoscale studies are used to study the composition of polymers, but there is no method for fatigue simulation of RC. Therefore, this paper presents a finite element modeling approach to study the fatigue problem of RC on the mesoscale, which includes the random generation of the main components of the RC mesoscale structure. We also model the interfacial transition zone (ITZ) of aggregate mortar and the ITZ of rubber mortar. This paper combines the theory of concrete damage to plastic with the method of zero-thickness cohesive elements in the ITZ, and it is a new numerical approach. The results show that the model can simulate reasonably well the random damage pattern after RC beam load damage. The damage occurred in the middle of the beam span and tended to follow the ITZ. The model can predict the fatigue life of RC under various loads.

A numerical study on heat transfer performances of horizontal ground heat exchangers in ground-source heat pumps.

Horizontal ground heat exchangers (HGHEs) have advantages such as convenient construction and low cost; however, their application and popularization are restricted owing to traditional linear HGHEs occupying large space and presenting low total heat transfer capacity. Spiral-coil and slinky-coil HGHEs have been proposed, but currently a comprehensive comparison and evaluation for these types of HGHEs are still needed. In this study, a three-dimensional heat transfer model of the three types of HGHEs for ground source heat pumps (GSHPs) was established. Based on the simulation results, the long-term heat transfer performances were investigated, including the temperature field of surrounding energy-storage soils, outlet working fluid temperature, coefficient of performance (COP) of units, and surplus temperature of the energy-storage soils. A new concept named heat transfer capacity per heat-affected area was proposed in this paper. It is found that the spiral-coil HGHEs have the best performances in terms of working-fluid outlet temperature, unit COP, total heat transfer capacity, heat transfer rate heat-affected area. The linear HGHEs shows the best performances in terms of mitigating heat imbalance risk and heat transfer rate per length. The results provide a reliable basis for selection of HGHE types in engineering practice and improvement guide in the future.