Controllable Crystallization of Two-Dimensional Bi Nanocrystals with Morphology-Boosted CO2 Electroreduction in Wide pH Environments.

Two-dimensional low-melting-point (LMP) metal nanocrystals are attracting increasing attention with broad and irreplaceable applications due to their unique surface and topological structures. However, the chemical synthesis, especially the fine control over the nucleation (reduction) and growth (crystallization), of such LMP metal nanocrystals remains elusive as limited by the challenges of low standard redox potential, low melting point, poor crystalline symmetry, etc. Here, a controllable reduction-melting-crystallization (RMC) protocol to synthesize free-standing and surfactant-free bismuth nanocrystals with tunable dimensions, morphologies, and surface structures is presented. Especially, ultrathin bismuth nanosheets with flat or jagged surfaces/edges can be prepared with high selectivity. The jagged bismuth nanosheets, with abundant surface steps and defects, exhibit boosted electrocatalytic CO2 reduction performances in acidic, neutral, and alkaline aqueous solutions, achieving the maximum selectivity of near unity at the current density of 210 mA cm-2 for formate evolution under ambient conditions. This work creates the RMC pathway for the synthesis of free-standing two-dimensional LMP metal nanomaterials and may find broader applicability in more interdisciplinary applications.

Design and development of a multifunctional moxibustion treatment machine based on heat-sensitive moxibustion therapy / 中国针灸

A multifunctional moxibustion treatment machine is designed and developed to assist the heat-sensitive moxibustion therapy. Through the motion control of the stepping motor by programmable logic controller (PLC), the automatic control is obtained for the acupoint detection of heat-sensitive moxibustion therapy and the manual operation of moxibustion. The skin temperature is monitored in real-time, using infrared non-contact temperature measurement technology. Based on the deviation of the temperature set value and the monitoring one, the distance between the moxibustion device and the exerted region is adjusted automatically by PLC so that the temperature is controlled practically. The multifunctional moxibustion treatment machine based on the heat-sensitive moxibustion therapy is capable of the operation control of mild moxibustion, circling moxibustion, sparrow-pecking moxibustion and along-meridian moxibustion techniques, as well as real-time monitoring of skin temperature. The temperature change curve of this machine is coincident with that obtained by the manual operation of heat-sensitive moxibustion. This multifunctional moxibustion treatment machine assists the delivery of heat-sensitive moxibustion therapy and it is satisfactory in temperature control and precise in operation.

Mechanisms of Chinese Medicine in Gastroesophageal Reflux Disease Treatment: Data Mining and Systematic Pharmacology Study / 中国结合医学杂志

OBJECTIVE@#To identify specific Chinese medicines (CMs) that may benefit patients with gastroesophageal reflux disease (GERD), and explore the action mechanism.@*METHODS@#Domestic and foreign literature on the treatment of GERD with CMs was searched and selected from China National Knowledge Infrastructure, China Science and Technology Journal Database, Wanfang Database, and PubMed from October 1, 2011 to October 1, 2021. Data from all eligible articles were extracted to establish the database of CMs for GERD. Apriori algorithm of data mining techniques was used to analyze the rules of herbs selection and core Chinese medicine formulas were identified. A system pharmacology approach was used to explore the action mechanism of these medicines.@*RESULTS@#A total of 278 prescriptions for GERD were analyzed, including 192 CMs. Results of Apriori algorithm indicated that Evodiae Fructus and Coptidis Rhizoma were the highest confidence combination. A total of 32 active ingredients and 66 targets were screened for the treatment of GERD. Enrichment analysis showed that the mechanisms of action mainly involved pathways in cancer, fluid shear stress and atherosclerosis, advanced glycation end product (AGE), the receptor for AGE signaling pathway in diabetic complications, bladder cancer, and rheumatoid arthritis.@*CONCLUSION@#Evodiae Fructus and Coptidis Rhizoma are the core drugs in the treatment of GERD and the potential mechanism of action of these medicines includes potential target and pathways.

Controlled Synthesis of Intermetallic Au2 Bi Nanocrystals and Au2 Bi/Bi Hetero-Nanocrystals with Promoted Electrocatalytic CO2 Reduction Properties.

The electrocatalytic properties of metal nanoparticles (NPs) strongly depend on their compositions and structures. Rational design of alloys and/or heterostructures provides additional approaches to modifying their surface geometric and electronic structures for optimized electrocatalytic performance. Here, a solution synthesis of freestanding intermetallic Au2 Bi NPs, the heterostructures of Au2 Bi/Bi hetero-NPs, and their promoted electrocatalytic CO2 reduction reaction (CO2 RR) performances were reported. It was revealed that the formation and in-situ conversion of heterogeneous seeds (e. g., Au) were of vital importance for the formation of intermetallic Au2 Bi and Au2 Bi/Bi hetero-NPs. It was also found that the Au components would act as the structure promoter moderating the binding strength for key intermediates on Bi surfaces. The alloying of Bi with Au and the formation of heterogeneous Au2 Bi/Bi interfaces would create more surface active sites with modulated electronic structures and stronger adsorption strengths for key intermediates, promoting the CO2 -to-HCOOH conversion with high activity and selectivity. This work presents a novel route for preparing intermetallic nanomaterials with modulated surface geometric/electric structures and promoting their electrocatalytic activities with alloying effects and interfacial effects. Such strategy may find wide application in catalyst design and synthesis for more electrocatalytic reactions.

Promoting the Electrocatalytic Reduction of CO2 on Ultrathin Porous Bismuth Nanosheets with Tunable Surface-Active Sites and Local pH Environments.

Electrochemical CO2 reduction reaction (CO2RR) yielding value-added chemicals provides a sustainable approach for renewable energy storage and conversion. Bismuth-based catalysts prove to be promising candidates for converting CO2 and water into formate but still suffer from poor selectivity and activity and/or sluggish kinetics. Here, we report that ultrathin porous Bi nanosheets (Bi-PNS) can be prepared through a controlled solvothermal protocol. Compared with smooth Bi nanoparticles (Bi-NPs), the ultrathin, rough, and porous Bi-PNS provide more active sites with higher intrinsic reactivities for CO2RR. Moreover, such high activity further increases the local pH in the vicinity of the catalyst surfaces during electrolysis and thus suppresses the competing hydrogen evolution reaction. As a result, the Bi-PNS exhibit significantly boosted CO2RR properties, showing a Faradaic efficiency of 95% with an effective current density of 45 mA cm-2 for formate evolution at the potential of -1.0 V versus reversible hydrogen electrode.

Modulating the electrocatalytic CO2 reduction performances of bismuth nanoparticles with carbon substrates with controlled degrees of oxidation.

The catalytic performances of metal nanoparticles can be widely tuned and promoted by the metal-support interactions. Here, we report that the morphologies and electrocatalytic CO2 reduction reaction (CO2RR) properties of bismuth nanoparticles (BiNPs) can be rationally modulated by their interactions with carbon black (CB) supports by controlling the degree of surface oxidation. Appropriately oxidized CB supports can provide sufficient oxygen-containing groups for anchoring BiNPs with tunable sizes and surface areas, desirable key intermediate adsorption abilities, appropriate surface wettability, and adequate electron transfer abilities. As a result, the optimized Bi/CB catalysts exhibited a promoted CO2RR performance with a Faradaic efficiency of 94% and a current density of 16.7 mA cm-2 for HCOO- at -0.9 V versus a reversible hydrogen electrode. Our results demonstrate the significance of regulating the interactions between supports and metal nanoparticles for both synthesis of the catalyst and electrolysis applications, which may find broader applicability in more electrocatalyst designs.

Nanoporous Graphene via a Pressing Organization Calcination Strategy for Highly Efficient Electrocatalytic Hydrogen Peroxide Generation.

Nanoporous graphenes (NPGs) have recently attracted huge attention owing to their designable structures and diverse properties. Many important properties of NPGs are determined by their structural regularity and homogeneity. The mass production of NPGs with periodic well-defined pore structures under a solvent-free green synthesis poses a great challenge and is largely unexplored. A facile synthetic strategy of NPGs via pressing organization calcination (POC) of readily available halogenated polycyclic aromatic hydrocarbons is developed. The gram-scale synthesized NPGs have ordered structures and possess well-defined nanopores, which can be easily exfoliated to few layers and oxidized in controllable approaches. After being decorated with oxygen species, the oxidized NPGs with tunable catalytic centers exhibit high activity, selectivity, and stability toward electrochemical hydrogen peroxide generation.

Metal-organic framework membranes with single-atomic centers for photocatalytic CO2 and O2 reduction.

The demand for sustainable energy has motivated the development of artificial photosynthesis. Yet the catalyst and reaction interface designs for directly fixing permanent gases (e.g. CO2, O2, N2) into liquid fuels are still challenged by slow mass transfer and sluggish catalytic kinetics at the gas-liquid-solid boundary. Here, we report that gas-permeable metal-organic framework (MOF) membranes can modify the electronic structures and catalytic properties of metal single-atoms (SAs) to promote the diffusion, activation, and reduction of gas molecules (e.g. CO2, O2) and produce liquid fuels under visible light and mild conditions. With Ir SAs as active centers, the defect-engineered MOF (e.g. activated NH2-UiO-66) particles can reduce CO2 to HCOOH with an apparent quantum efficiency (AQE) of 2.51% at 420 nm on the gas-liquid-solid reaction interface. With promoted gas diffusion at the porous gas-solid interfaces, the gas-permeable SA/MOF membranes can directly convert humid CO2 gas into HCOOH with a near-unity selectivity and a significantly increased AQE of 15.76% at 420 nm. A similar strategy can be applied to the photocatalytic O2-to-H2O2 conversions, suggesting the wide applicability of our catalyst and reaction interface designs.

Metal-Organic Framework Membranes Encapsulating Gold Nanoparticles for Direct Plasmonic Photocatalytic Nitrogen Fixation.

Photocatalytic nitrogen fixation reaction can harvest the solar energy to convert the abundant but inert N2 into NH3. Here, utilizing metal-organic framework (MOF) membranes as the ideal assembly of nanoreactors to disperse and confine gold nanoparticles (AuNPs), we realize the direct plasmonic photocatalytic nitrogen fixation under ambient conditions. Upon visible irradiation, the hot electrons generated on the AuNPs can be directly injected into the N2 molecules adsorbed on Au surfaces. Such N2 molecules can be additionally activated by the strong but evanescently localized surface plasmon resonance field, resulting in a supralinear intensity dependence of the ammonia evolution rate with much higher apparent quantum efficiency and lower apparent activation energy under stronger irradiation. Moreover, the gas-permeable Au@MOF membranes, consisting of numerous interconnected nanoreactors, can ensure the dispersity and stability of AuNPs, further facilitate the mass transfer of N2 molecules and (hydrated) protons, and boost the plasmonic photocatalytic reactions at the designed gas-membrane-solution interface. As a result, an ammonia evolution rate of 18.9 mmol gAu-1 h-1 was achieved under visible light (>400 nm, 100 mW cm-2) with an apparent quantum efficiency of 1.54% at 520 nm.

Acidic preconditioning reduces lipopolysaccharide-induced acute lung injury by upregulating the expression of angiotensin-converting enzyme 2.

Acid preconditioning (APC) through carbon dioxide inhalation can exert protective effects during acute lung injury (ALI) triggered by ischemia-reperfusion. Angiotensin-converting enzyme 2 (ACE2) has been identified as a receptor for severe acute respiratory syndrome coronavirus and the novel coronavirus disease-19. Downregulation of ACE2 plays an important role in the pathogenesis of severe lung failure after viral or bacterial infections. The aim of the present study was to examine the anti-inflammatory mechanism through which APC alleviates lipopolysaccharide (LPS)-induced ALI in vivo and in vitro. The present results demonstrated that LPS significantly downregulated the expression of ACE2, while APC significantly reduced LPS-induced ALI and provided beneficial effects. In addition, bioinformatics analysis indicated that microRNA (miR)-200c-3p directly targeted the 3'untranslated region of ACE2 and regulated the expression of ACE2 protein. LPS exposure inhibited the expression of ACE2 protein in A549 cells by upregulating the levels of miR-200c-3p. However, APC inhibited the upregulation of miR-200c-3p induced by LPS, as well as the downregulation of ACE2 protein, through the NF-κB pathway. In conclusion, although LPS can inhibit the expression of ACE2 by upregulating the levels of miR-200c-3p through the NF-κB pathway, APC inhibited this effect, thus reducing inflammation during LPS-induced ALI.

Morphology-dependent electrocatalytic nitrogen reduction on Ag triangular nanoplates.

Electrocatalytic nitrogen reduction reactions (ENRR) can produce ammonia from nitrogen and water under ambient conditions. Here, we report the morphology-dependent electro-catalytic nitrogen reduction on Ag triangular nanoplates. Boosted by potassium cations, Ag triangular nanoplates with sharp edges exhibit a high faradaic efficiency of 25% with an ammonia yield of 58.5 mg gAg-1 h-1 at a low overpotential of -0.25 V vs. RHE. In comparison, rounded Ag nanoparticles mainly enclosed by {111} and {100} surfaces show a much smaller faradaic efficiency of 16% and ammonia yield of 38 mg gAg-1 h-1 at a larger overpotential (-0.35 V vs. RHE).

Promoting photocatalytic nitrogen fixation with alkali metal cations and plasmonic nanocrystals.

Photocatalytic nitrogen fixation can produce ammonia from nitrogen and water under ambient conditions in the presence of sunlight. Here, we report that alkali metal cations (Li+, Na+, and K+) can significantly promote nitrogen activation and plasmonic nanocrystals (Au and Ag) can sensitize photocatalysts under visible light. The ammonia yield and selectivity on Au/P25 under UV-vis irradiation could be increased from 0.085 mmol g-1 h-1 and 75% to 0.43 mmol g-1 h-1 and 94.5% when promoted by K+, showing a visible-light-driven activity of 0.14 mmol g-1 h-1 and an AQE of 0.62% at 550 nm. The activity could be further increased to 1.02 (UV-vis) and 0.32 (visible) mmol g-1 h-1 with AQE of 0.93% at 550 nm with methanol added as the sacrificial agent. This strategy could be applied to a series of photocatalysts (e.g. TiO2, ZnO, and BiOBr) and may represent a general approach for designing efficient nitrogen fixation processes.

Ultrathin cobalt oxide nanostructures with morphology-dependent electrocatalytic oxygen evolution activity.

Engineering compositions, structures, and defects can endow nanomaterials with optimized catalytic properties. Here, we report that cobalt oxide (CoOx) ultrathin nanosheets (UTNS, ∼1.6 nm thick) with a large number of oxygen defects and mixed cobalt valences can be obtained through a facile one-step hydrothermal protocol. The large number of oxygen defects make the ultrathin CoOx nanosheet a superior OER catalyst with low overpotentials of 315 and 365 mV at current densities of 50 and 200 mA cm-2, respectively. The stable framework-like architectures of the UTNS further ensure their high OER activity and durability. Our method represents a facile one-step preparation of CoOx nanostructures with tunable compositions, morphologies, and defects, and thus promotes OER properties. This strategy may find its wider applicability in designing active, robust, and easy-to-obtain catalysts for OER and other electrocatalytic systems.

Reduced Macular Vascular Density in Myopic Eyes / 中华医学杂志(英文版)

<p><b>BACKGROUND</b>Morphological changes of the vasculature system in patients with myopia have been observed by Doppler ultrasound and fundus fluorescein angiography (FFA); however, these studies have limitations. Doppler ultrasound provides low-resolution images which are mainly obtained from visualized large vessels, and FFA is an invasive examination. Optic coherence tomography (OCT) angiography is a noninvasive, high-resolution measurement for vascular density. The purpose of this study was to investigate the change of vascular density in myopic eyes using OCT angiography.</p><p><b>METHODS</b>This cross-sectional study includes a total of 91 eyes from 47 participants including control, moderate, and high myopia that were evaluated by OCT angiography. Patients with myopia were recruited from the Refractive Department, Shenzhen Aier Eye Hospital, from August 5, 2015 to April 1, 2016. Emmetropic eyes were from healthy volunteers. The vascular density at macula and optic disc regions, ganglion cell complex (GCC) thickness, and retinal nerve fiber layer (RNFL) thickness were measured. Their relationships with axial length (AL) and refractive error were analyzed. One-way analysis of variance (ANOVA), Pearson's correlation, and generalized estimating equation were used for statistical analysis.</p><p><b>RESULTS</b>Both superficial and deep macular vascular density were highest in control (25.64% ± 3.76% and 37.12% ± 3.66%, respectively), then in moderate myopia (21.15% ± 5.33% and 35.35% ± 5.50%, respectively), and lowest in high myopia group (19.64% ± 3.87% and 32.81% ± 6.29%, respectively) (F = 13.74 and 4.57, respectively; both P < 0.001). Both superficial (β = -0.850 and 0.460, respectively) and deep (β = -0.766 and 0.396, respectively) macular vascular density were associated with AL and spherical equivalent (all P < 0.001). Superficial macular vascular density was associated with GCC thickness (β = 0.244, P = 0.040), independent of spherical equivalent. The vascular density in optic disc region had no difference among the three groups, and it was not associated with AL, spherical equivalent, or RNFL thickness.</p><p><b>CONCLUSION</b>Our results suggested that with the increase of myopia, the vascular density decreased in macular region, but not in optic disc region.</p>

Identification and in vitro pharmacological characterization of a novel and selective α7 nicotinic acetylcholine receptor agonist, Br-IQ17B.

AIM: Alpha7-nicotinic acetylcholine receptor (α7 nAChR) is a ligand-gated Ca(2+)-permeable ion channel implicated in cognition and neuropsychiatric disorders. Activation of α7 nAChR improves learning, memory, and sensory gating in animal models. To identify novel α7 nAChR agonists, we synthesized a series of small molecules and characterized a representative compound, Br-IQ17B, N-[(3R)-1-azabicyclo[2,2,2]oct-3-yl]-5-bromoindolizine-2-carboxamide, which specifically activates α7 nAChR. METHODS: Two-electrode voltage clamp (TEVC) recordings were primarily used for screening in Xenopus oocytes expressing human α7 nAChR. Assays, including radioisotope ligand binding, Western blots, whole-cell recordings of hippocampal culture neurons, and spontaneous IPSC recordings of brain slices, were also utilized to evaluate and confirm the specific activation of α7 nAChR by Br-IQ17B. RESULTS: Br-IQ17B potently activates α7 nAChR with an EC50 of 1.8±0.2 µmol/L. Br-IQ17B is selective over other subtypes such as α4ß2 and α3ß4, but it blocks 5-HT3A receptors. Br-IQ17B displaced binding of the α7 blocker [(3)H]-MLA to hippocampal crude membranes with a Ki of 14.9±3.2 nmol/L. In hippocampal neurons, Br-IQ17B evoked α7-like currents that were inhibited by MLA and enhanced in the presence of the α7 PAM PNU-120596. In brain slice recordings, Br-IQ17B enhanced GABAergic synaptic transmission in CA1 neurons. Mechanistically, Br-IQ17B increased ERK1/2 phosphorylation that was MLA-sensitive. CONCLUSION: We identified the novel, potent, and selective α7 agonist Br-IQ17B, which enhances synaptic transmission. Br-IQ17B may be a helpful tool to understand new aspects of α7 nAChR function, and it also has potential for being developed as therapy for schizophrenia and cognitive deficits.

Microwave radiation induces injury to GC-2spd cells / 中华男科学杂志

<p><b>OBJECTIVE</b>To explore the impact of microwave radiation on GC-2spd cells.</p><p><b>METHODS</b>We exposed cultured GC-2spd cells to microwave radiation at the average power densities of 0, 10 and 30 mW/cm2 for 15 minutes and, from I to 24 hours after the exposure, we observed the changes in cell proliferation, histology and ultrastructure, cell apoptosis, and cAMP content by MTIT, light microscopy, electron microscopy, flow cytometry and ELISA.</p><p><b>RESULTS</b>Compared with the control group, the GC-2spd cells showed a significant decrease in proliferation ability at 1 -24 hours after 10 and 30 mW/cm2 microwave radiation, except at 12 hours after 30 mW/cm2 radiation (P <0.05 or P <0.01), with reduced length and number of cell enation and increased intra cytoplasm vacuoles. The rate of cell apoptosis (%) was significantly increased in the 10 and 30 mW/cm2 groups at 6 hours (4.56 +/- 2.09 vs 14.59 +/- 1.09 and 8.48 +/- 1.73, P <0.05 or P <0.01) , with agglutination and margin translocation of chromatins and obvious dilation of endo cytoplasmic reticula. The cAMP content (nmol/g) in the GC-2spd cells was remarkably reduced in the 10 and 30 mW/cm2 groups at 6 and 24 hours (2.77 +/-0.24 vs 1.65+/- 0. 17 and 1.96+/-0.10, 3.02 +/-0.47 vs 2.13 +/-0.33 and 1.69 +/-0.27, P <0.05 or P <0.01).</p><p><b>CONCLUSION</b>Microwave radiation at 10 and 30 mW/cm2 may cause injury to GC-2spd cells, which is manifested by decreased content of intracellular cAMP, reduced activity of cell proliferation, and increased rate of cell apoptosis.</p>

Mechanisms of electromagnetic radiation damaging male reproduction / 中华男科学杂志

More and more evidence from over 50 years of researches on the effects of electromagnetic radiation on male reproduction show that a certain dose of electromagnetic radiation obviously damages male reproduction, particularly the structure and function of spermatogenic cells. The mechanisms of the injury may be associated with energy dysmetabolism, lipid peroxidation, abnormal expressions of apoptosis-related genes and proteins, and DNA damage.

The effects of microwave radiation on expressions of pCREB, CREM, and CBP in the testicular tissue of rats / 解放军医学杂志

Objective To investigate the effects and ascertain the significance of microwave radiation on the expression of phosphorylated cyclic adenosine monophosphate (cAMP)-response element-binding protein (pCREB), cAMP-responsive element modulator (CREM), and CREB-binding protein (CBP) in the testicular tissue of rats. Methods Thirty male Wistar rats were randomly divided into control group (n=5) and radiation group (n=25). Five rats in the radiation group were sacrificed at 6h, 1, 3, 7, and 14d, respectively, after exposure to microwave radiation for 5min, with an average power density of 30mW/cm2. Rats in the control group were sacrificed within 1d without receiving microwave radiation. Expressions and dynamic changes in pCREB, CREM, and CBP in the testicular tissues were examined by immunohistochemistry and Western blotting. Results pCREB, CREM, and CBP were mainly expressed in the sperm nuclei of the seminiferous tubule in the rat testis. pCREB and CBP protein expressions were downregulated from 6h to14d (except for pCREB at 1d) after exposure to microwave radiation (P<0.05 or P<0.01). The expression of CREM was also weakened significantly from 6h to 7d after radiation (P<0.05 or P<0.01). Conclusion The downregulation of pCREB, CREM, and CBP expression may play an important role in the injury of spermatogenic cells caused by microwave radiation.

Long-term microwave radiation affects male reproduction in rats / 中华男科学杂志

<p><b>OBJECTIVE</b>To investigate the effect of long-term microwave radiation on male reproduction in rats.</p><p><b>METHODS</b>A total of 100 male Wistar rats were exposed to microwave radiation with average power density of 0, 2.5, 5 and 10 mW/cm2 for 4 weeks, 5 times a week and 6 minutes per time. Changes in serum testosterone, testicular index, histology and ultrastructure, and the percentage of teratospermia in the epididymis were observed dynamically at 6 h, 7 d, 14 d, 28 d and 60 d after the exposure.</p><p><b>RESULTS</b>There was a significant decrease in serum testosterone concentration at 28 d after microwave radiation at 2.5, 5 and 10 mW/cm2 ([10.20 +/- 4.31] ng/ml, [5.56 +/- 3.47] ng/ml and [7.53 +/- 4.54] ng/ml) and at 60 d at 10 mW/cm2 ( [15.95 +/- 9.54] ng/ml), as compared with the control group ([23.35 +/- 8.06] ng/ml and [31.40 +/- 9.56] ng/ml) (P < 0.05 or P < 0.01). No significant changes were found in the testis index at 6 h -60 d after microwave radiation at the three doses, but different degrees of degeneration, necrosis and shedding of spermatogenic cells, thinning of spermatogenic epithelia, and decrease or deletion of spermatozoa were observed, and more obvious at 28 d and 60 d. Swelling and cavitation of mitochondria in all spermatogenic cells, agglutination and margin translocation of nuclear chromatin in the spermatogonial and Leydig cells were seen at 7 d and 60 d after 5 mW/cm2 microwave radiation. The rate of teratospermia of the epididymis was increased, more obviously at 7 d after 2.5, 5 mW/cm2, 60 d after 5 mW/cm2, and 7 d, 28 d and 60 d after 10 mW/cm2 microwave radiation (P < 0.05 or P < 0.01).</p><p><b>CONCLUSION</b>Long-term microwave radiation may cause injury to male reproduction, which is positively correlated with the radiation dose, and has an obvious late effect.</p>

Expression of erythropoietin and its receptor in normal and neovascularized murine corneas induced by alkali burns / 国际眼科杂志(Guoji Yanke Zazhi)

AIM: To test the expression of erythropoietin (Epo) and its receptor EpoR in normal and neovascularized murine corneas induced by alkali burns, and to investigate whether Epo/EpoR is involved in the process of corneal angiogenesis.METHODS: The expression of Epo/EpoR was tested in normal and neovascularized murine corneas induced by alkali burns through immunohistochemistry of corneal frozen sections. Epo cloning, expression, and purification were carried out. Then Epo protein (6μL, 1μg) and control (6μ L of vector control or saline) were injected into the corneal stroma respectively, and the corneas were checked at the 14th day after injection to see whether corneal neovascuarization occurred.RESULTS: Epo/EpoR was expressed in epithelial cells, endothelial cells and stromal cells in normal and neovascularized corneas induced by alkaline burns, and also expressed strongly in neovascularized cornea. They were expressed at the same time in stromal inflammatory cells and new vessels. Corneal neovascularization was induced by Epo intrastromal injection in 5 out of 6 eyes ,but no new vessels were observed in all controls (n = 6) at day 14 after vector control or saline intrastromal injection in normal corneas.CONCLUSION: This paper first reported the expression of Epo and its receptor in normal and neovascularized cornea. Injection of Epo into the corneal stroma may induce the corneal neovascularization. Epo/EpoR is associated with the formation of corneal neovascularization.