Evaluation of comorbid psychological disorders in functional gastrointestinal disorders patients by vibraimage technology: protocol of a prospective, single-center trial.

Introduction: Functional gastrointestinal disorders (FGIDs) affect over 40% of individuals globally, and impact the quality of life. A significant portion of FGIDs patients comorbids with anxiety and depression. Traditional screening tools for psychological disorders may lack comprehensiveness. Vibraimage technology currently enables non-contact, objective analysis of psychological indicators through high-frame-rate cameras and computer analysis of micro-movements. Therefore, this study aims to (1) explore the use of vibraimage technology as a non-contact objective method to assess the psychological status of FGIDs patients, comparing this technology with the Hospital Anxiety and Depression Scale (HADS) to evaluate its screening efficacy, and (2) observe the therapeutic outcomes of FGIDs patients with or without comorbid psychological disorders after the same conventional treatment. Methods: This is a prospective, single-center observational trial. 276 FGIDs outpatients who visit Peking Union Medical College Hospital will be evaluated simultaneously by HADS and vibraimage technology, then to evaluate the screen efficacy of this technology. The patients will be allocated into two groups (those with or without psychological disorders). The primary endpoint is the overall rate of improvement, specifically referring to the proportion of patients who achieved Likert scores greater than or equal to 4. The secondary endpoints encompass evaluating whether there is a reduction of more than 50% in symptom evaluation scores such as IBS-SSS. Additionally, the study will assess changes in health status and quality of life using SF-36 questionnaires and the patients' satisfaction with treatment. Furthermore, psychological status will be reassessed by vibraimage technology and HADS after treatment to evaluate the effect of combined psychological factors on FGIDs treatment.

Hepatic and extrahepatic metabolic modulation in hbv-related decompensated cirrhosis and acute-on-chronic liver failure.

Acute-on-chronic liver failure (ACLF) and decompensated cirrhosis (DC) are life-threatening syndromes that can develop at the end-stage of chronic hepatitis B virus (HBV) infection. Both ACLF and DC are complicated by hepatic and extrahepatic pathogeneses. To better understand the compartment-specific metabolic modulations related to their pathogenesis, HBV-DC, HBV-ACLF patients, and controls (30 each) were analyzed by metabolomics using portal (Port), hepatic vein (Hep), and peripheral (Peri) serum. Compartment ratios of metabolites (RatioHep/Port, RatioPeri/Hep, and RatioPort/Peri) were calculated. The liver tissues (10 per group) were analyzed using transcriptomics and metabolomics. An additional 75 patients with ACLF, 20 with DC, and 20 with liver cirrhosis (LC) were used to confirm oxlipid dysregulation. Both multi-omics datasets suggest suppressed energy, amino acid, and pyrimidine metabolism in the ACLF/DC liver. The serum metabolomic variations were contributed primarily by disease rather than sampling compartments, as both HBV-ACLF and HBV-DC patients demonstrated abnormal profiles of amino acids and peptides, indoles, purines, steroids, and benzimidazoles. In ACLF/DC patients, impaired hepatic metabolism resulted in a highly correlated hepatic and portal vein serum metabolome and release of inflammatory lipids and heme metabolites from the liver. HBV-ACLF showed higher RatioPeri/Hep of extrahepatic inflammatory oxlipids, while HBV-DC patients showed higher RatioPort/Peri of gut microbial metabolites. An inflammatory oxlipid outburst was confirmed in the early stages of HBV-ACLF. The inflammatory effects of the selected oxlipids were confirmed in monocytes. These findings support a synergy between liver-specific mechanisms and systemic inflammation in ACLF/DC development, and that pro-inflammatory oxlipids are metabolic signatures of early HBV-ACLF.

Elucidating the role of angiogenesis-related genes in colorectal cancer: a multi-omics analysis.

Background: Angiogenesis plays a pivotal role in colorectal cancer (CRC), yet its underlying mechanisms demand further exploration. This study aimed to elucidate the significance of angiogenesis-related genes (ARGs) in CRC through comprehensive multi-omics analysis. Methods: CRC patients were categorized according to ARGs expression to form angiogenesis-related clusters (ARCs). We investigated the correlation between ARCs and patient survival, clinical features, consensus molecular subtypes (CMS), cancer stem cell (CSC) index, tumor microenvironment (TME), gene mutations, and response to immunotherapy. Utilizing three machine learning algorithms (LASSO, Xgboost, and Decision Tree), we screen key ARGs associated with ARCs, further validated in independent cohorts. A prognostic signature based on key ARGs was developed and analyzed at the scRNA-seq level. Validation of gene expression in external cohorts, clinical tissues, and blood samples was conducted via RT-PCR assay. Results: Two distinct ARC subtypes were identified and were significantly associated with patient survival, clinical features, CMS, CSC index, and TME, but not with gene mutations. Four genes (S100A4, COL3A1, TIMP1, and APP) were identified as key ARCs, capable of distinguishing ARC subtypes. The prognostic signature based on these genes effectively stratified patients into high- or low-risk categories. scRNA-seq analysis showed that these genes were predominantly expressed in immune cells rather than in cancer cells. Validation in two external cohorts and through clinical samples confirmed significant expression differences between CRC and controls. Conclusion: This study identified two ARG subtypes in CRC and highlighted four key genes associated with these subtypes, offering new insights into personalized CRC treatment strategies.

Identification and diagnostic potential of hsa_circ_101303 in colorectal cancer: unraveling a regulatory network.

BACKGROUND: The role of novel circular RNAs (circRNAs) in colorectal cancer (CRC) remains to be determined. This study aimed to identify a novel circRNA involved in CRC pathogenesis, assess its diagnostic value, and construct a regulatory network. METHODS: Differential expression analysis was conducted using circRNA datasets to screen for differentially expressed circRNAs. The expression of selected circRNAs was validated in external datasets and clinical samples. Diagnostic value of plasma circRNA levels in CRC was assessed. A competing endogenous RNA (ceRNA) network was constructed for the circRNA using TCGA dataset. RESULTS: Analysis of datasets revealed that hsa_circ_101303 was significantly overexpressed in CRC tissues compared to normal tissues. The upregulation of hsa_circ_101303 in CRC tissues was further confirmed through the GSE138589 dataset and clinical samples. High expression of hsa_circ_101303 was associated with advanced N stage, M stage, and tumor stage in CRC. Plasma levels of hsa_circ_101303 were markedly elevated in CRC patients and exhibited moderate diagnostic ability for CRC (AUC = 0.738). The host gene of hsa_circ_101303 was also found to be related to the TNM stage of CRC. Nine miRNAs were identified as target miRNAs for hsa_circ_101303, and 27 genes were identified as targets of these miRNAs. Subsequently, a ceRNA network for hsa_circ_101303 was constructed to illustrate the interactions between the nine miRNAs and 27 genes. CONCLUSIONS: The study identifies hsa_circ_101303 as a highly expressed circRNA in CRC, which is associated with the progression of the disease. Plasma levels of hsa_circ_101303 show promising diagnostic potential for CRC. The ceRNA network for hsa_circ_101303 provides valuable insights into the regulatory mechanisms underlying CRC.

Characterization of acute-on-chronic liver diseases: A multicenter prospective cohort study.

BACKGROUND: Acute-on-chronic liver disease (AoCLD) accounts for the majority of patients hospitalized in the Department of Hepatology or Infectious Diseases. AIM: To explore the characterization of AoCLD to provide theoretical guidance for the accurate diagnosis and prognosis of AoCLD. METHODS: Patients with AoCLD from the Chinese Acute-on-Chronic Liver Failure (ACLF) study cohort were included in this study. The clinical characteristics and outcomes, and the 90-d survival rate associated with each clinical type of AoCLD were analyzed, using the Kaplan-Meier method and the log-rank test. RESULTS: A total of 3375 patients with AoCLD were enrolled, including 1679 (49.7%) patients with liver cirrhosis acute decompensation (LC-AD), 850 (25.2%) patients with ACLF, 577 (17.1%) patients with chronic hepatitis acute exacerbation (CHAE), and 269 (8.0%) patients with liver cirrhosis active phase (LC-A). The most common cause of chronic liver disease (CLD) was HBV infection (71.4%). The most common precipitants of AoCLD was bacterial infection (22.8%). The 90-d mortality rates of each clinical subtype of AoCLD were 43.4% (232/535) for type-C ACLF, 36.0% (36/100) for type-B ACLF, 27.0% (58/215) for type-A ACLF, 9.0% (151/1679) for LC-AD, 3.0% (8/269) for LC-A, and 1.2% (7/577) for CHAE. CONCLUSION: HBV infection is the main cause of CLD, and bacterial infection is the main precipitant of AoCLD. The most common clinical type of AoCLD is LC-AD. Early diagnosis and timely intervention are needed to reduce the mortality of patients with LC-AD or ACLF.

lncRNA SNHG4 inhibits ferroptosis by orchestrating miR-150-5p/c-Myb axis in colorectal cancer.

LncRNAs have shown to regulate ferroptosis in colorectal cancer (CRC), but the mechanism remains largely unknown. This study unveiled the mechanism of SNHG4 underlying ferroptosis in CRC. RNA-seq and RT-PCR assay confirmed SNHG4 was decreased after Erastin treatment in CRC cells. Overexpression of SNHG4 inhibited and silence promoted CRC cells ferroptosis. SNHG4 was positively correlated to c-Myb in CRC tissues and both located in cytoplasm of CRC cells. RIP and RNA pull-down assays verified the interaction between SNHG4 and c-Myb. Silence of c-Myb alleviated the suppressing effect on ferroptosis by SNHG4 in CRC cells. Dual-luciferase reporter assay revealed that SNHG4 sponging miR-150-5p in CRC cells. Overexpression of SNHG4 decreased the miR-150-5p and increased c-Myb expression. c-Myb was a direct target gene of miR-150-5p in CRC cells. Moreover, effect of CDO1 on ferroptosis was regulated transcriptionally by c-Myb, overexpression of c-Myb reduce CDO1 expression and enhance the GPX4 levels. The animal models confirmed that regulatory effect of SNHG4 on miR-150-5p and c-Myb after inducing ferroptosis. We concluded that SNHG4 inhibited Erastin-induce ferroptosis in CRC, this effect is via sponging miR-150-5p to regulate c-Myb expression, and activated CDO1/GPX4 axis. These findings provide insights into the regulatory mechanism of SNHG4 on ferroptosis.

SNHG4-mediated PTEN destabilization confers oxaliplatin resistance in colorectal cancer cells by inhibiting ferroptosis.

Oxaliplatin resistance poses a significant challenge in colorectal cancer (CRC) therapy, necessitating further investigation into the underlying molecular mechanisms. This study aimed to elucidate the regulatory role of SNHG4 in oxaliplatin resistance and ferroptosis in CRC. Our findings revealed that treatment with oxaliplatin led to downregulation of SNHG4 expression in CRC cells, while resistant CRC cells exhibited higher levels of SNHG4 compared to parental cells. Silencing SNHG4 attenuated oxaliplatin resistance and reduced the expression of resistance-related proteins MRD1 and MPR1. Furthermore, induction of ferroptosis effectively diminished oxaliplatin resistance in both parental and resistant CRC cells. Notably, ferroptosis induction resulted in decreased SNHG4 expression, whereas SNHG4 overexpression suppressed ferroptosis. Through FISH, RIP, and RNA pull-down assays, we identified the cytoplasmic localization of both SNHG4 and PTEN, establishing that SNHG4 directly targets PTEN, thereby reducing mRNA stability in CRC cells. Silencing PTEN abrogated the impact of SNHG4 on oxaliplatin resistance and ferroptosis in CRC cells. In vivo experiments further validated the influence of SNHG4 on oxaliplatin resistance and ferroptosis in CRC cells through PTEN regulation. In conclusion, SNHG4 promotes resistance to oxaliplatin in CRC cells by suppressing ferroptosis through instability of PTEN, thus serves as a target for patients with oxaliplatin-base chemoresistance.

Unlocking employee innovative behavior: the role of humble leadership, core self-evaluation, and leader-member exchange.

Humble leadership has gained attention in recent years due to its potential impact on employee performance. This study explores the association between humble leadership and follower innovative behavior by investigating the moderating role of core self-evaluation (CSE) and the mediating role of leader-member exchange (LMX). The study uses data from 328 followers and their immediate leaders to test a mediated moderation model. Results show that there is a favorable association between humble leadership and LMX and followers' innovative behavior, particularly pronounced for followers who possess lower levels of CSE. The findings suggest that humble leaders should focus their development efforts on followers with low CSE to achieve complementarity congruity and improved innovation. This research enhances the existing body of knowledge by emphasizing the significance of comprehending the functions of relational procedures and the psychological resources of followers in determining the effectiveness of humble leadership. These findings have practical implications for organizations seeking to enhance their leadership effectiveness and followers' innovative behavior.

Effect of printing orientation on physical and mechanical properties of 3D printing prosthodontic base resin materials / 北京大学学报(医学版)

Objective:To analyze the influence of forming direction on the surface characteristics,elastic modulus,bending strength and fracture toughness of printed parts and the relationship between forming direction and force direction,and to provide scientific basis and guidance for the clinical applica-tion of oral denture base resin materials.Methods:The 3D printing technology was used to print denture base resin samples.The shape and size of the samples referred to the current standard for testing conven-tional denture base materials.The samples used for physical performance testing were cylindrical(with a diameter of 15 mm and a thickness of 1 mm)and printed at different angles along the Z axis(0°,45°,90°).Scanning electron microscope was used to observe the microscopic topography of the different sam-ples.The color stability of different samples was observed by color stabilizer.The surface roughness of the samples was analyzed by using surface roughness tester.The Vickers hardness was measured to ana-lyze the hardness of the samples.The samples used for mechanical performance testing were rectangular(elastic modulus and bending strength:A length of 64 mm,a width of 10 mm,and a height of 3.3 mm;fracture toughness:A length of 39 mm,a width of 8 mm,and a height of 4 mm),divided into two groups:W group and H group.The W group was printed from the bottom up along the Z axis with the length × width as the bottom surface parallel to the X,Y axis plane,while the H group printed from the bottom up along the Z axis with the length × height as the bottom surface parallel to the X,Y axis plane.The forming angles of both groups were equally divided into 0°,45°,and 90°.The elastic modulus,bending strength and fracture toughness of different samples were studied through universal mechanical testing machine.SPSS 22.0 software was used for statistical analysis.Results:The microscopic topogra-phy and roughness of different samples were closely related to the printing direction,with significant differences between the 0°,45°,and 90° specimens.The 0° specimens had the smoothest surface(roughness＜1 μm).The surface of the 45 ° specimen was the roughest(roughness＞3 μm).The microhardness of the 0° sample was the best[(196.13±0.20)MPa],with a significant difference com-pared with the 90° sample[(186.62±4.81)MPa,P＜0.05].The mechanical properties of different samples were also closely related to the printing direction.The elastic modulus,bending strength,and fracture toughness of the 45° samples in the W group were the highest compared with the other groups.The results of elastic modulus showed that in the H group,the 45° specimens had the highest elastic mo-dulus,which was significantly different from the 0° and 90° specimens(P＜0.05).The elastic modulus of 0° and 45° specimens in the W group were higher than those in 90° specimens(P＜0.05).The bending strength results showed that there was no significant difference between the specimens from dif-ferent angles in the H group.The bending strength of the 90° specimens in the W group was the smallest,and there was a significant difference between 90° and the 0° and 45° specimens(P＜0.05);And the bendind strength of the 0° and 45° specimens in the W group was significantly higher than that of the 0° and 45° specimens in the H group(P＜0.05).The fracture toughness results showed that the fracture toughness of the H group specimens was lower than 1.9 MPa m1/2,which was specified in the denture base standard.The 45° samples in the W group were the highest,with significant differences compared with the 0° and 90° samples(P＜0.05).And the 90° samples of the W group specimens were lower than 1.9 MPa m1/2.And the fracture toughness of the 45° specimen in the W group was significantly higher than that of all the specimens in the H group(P＜0.05).Conclusion:The 0° samples had rela-tively better physical properties.The 45° samples had the best mechanical properties.But the fracture toughness of specimens(H group and 90° samples of W group)did not yet meet clinical requirements.That indicated that the characteristics of the 3D printing denture base resin were affected by the printing direction.Only when the performance of the printed samples in all directions met the minimum require-ments of the standard,they could be used in clinical practice.

ROBO3 deficiency promotes chemotherapy-induced transition of macrophage to foam cell / 实用医学杂志

Objective To explore the effect of chemotherapeutic drugs doxorubicin or cisplatin on lipid metabolism of macrophages and its regulatory mechanism.Methods Macrophage RAW264.7 was treated with doxorubicin or cisplatin,and intracellular lipid level was detected by oil red O and ELISA;RNA sequence screen-ing and Western blot were used to confirm the changes of gene expression after chemotherapeutic drug treatment;The effects of silencing ROBO3 on cellular lipid metabolism were explored,and changes in key target genes of lipid metabolism were detected by Q-PCR and western blot.Results Adriamycin or cisplatin induced disturbances in macrophage cholesterol metabolism and exacerbated macrophage foaminess.Further studies showed that the expression of the axon guidance factor receptor,ROBO3,increased and then decreased during the chemotherapeutic drug-induced macrophage foaming process.Further intervention with ROBO3 exacerbates oxldl-induced cholesterol accumulation and foam formation in macrophages.Mechanistically,ROBO3 deficiency promotes the expression of cholesterol synthesis-related gene DHCR24 and inhibits the expression of cholesterol elimination-related gene ABCG1,resulting in cholesterol accumulation in macrophages.Conclusion This study found that ROBO3 plays an important regulatory role in the disruption of cholesterol metabolism and its foaming process in macrophages induced by chemotherapeutic drugs,which may provide new targets and ideas for the prevention and treatment of chemotherapy-related atherosclerosis.

Preparation and performance evaluation of S100B time-resolved fluorescence immunoassay kit / 医疗卫生装备

Objective To develop a time-resolved fluorescent immunoassay kit for the rapid,accurate and quantitative detection of S100B protein in serum and to evaluate its performance.Methods The test strip was prepared using time-resolved fluorescent microsphere-labeled anti-S100B polyclonal antibody and rabbit IgG antibody,labeling pads,sample pads,S100B nitrocellulose films and absorbent paper,and an S100B time-resolved fluorescence immunoassay kit was obtained by assembling the cartridge.The performance of the kit developed was evaluated by standard curve,accuracy,minimum detection limit,linear interval,specificity,reproducibility and stability.The reference intervals of 199 pieces of healthy human serum and plasma samples from a certain region were detected with the kit,and the clinical performance of the kit and Roche Elecsys S100 kit was tested by synchronous blind method to assess the consistency of the results of the two kits for 142 samples.Results The S100B time-resolved fluorescence immunoassay kit had the standard curve beingy=(1.133 02+1.752 24)/[1+(x/1.082 20)×(-0.603 52)]-1.752 24,R2=0.999 08 and the linear range being[0.05,30]ng/mL,which met the requirements of the relative deviation of the accuracy within±15％,the minimum detection limit not hgier than 0.05 ng/mL,the relative deviation of specificity within±15％and the coefficient of variation of intra-and inter-batch difference less than 15％.The stability test results indicated that the kit was valid for 12 months at 2-30 ℃ conditions.The reference intervals of serum and plasma samples measured by the kit were both lower than 0.3 ng/mL.Clinical trials showed that the results by the kit and Roche Elecsys S100 Assay Kit were in high agreement(Kappa=0.906 1＞0.80)and met the requirements.Conclusion The kit developed detects the concentration of S100B protein in serum quickly,accurately and quantitatively,and provides references for the diagnosis and treatment of neurological diseases,autoimmune diseases,cerebrovascular diseases and etc.[Chinese Medical Equipment Journal,2024,45(1):47-55]

Optimizing outdoor smoking points outside large exhibition halls based on real-time on-site PM2.5 and CO2 monitoring / 环境与职业医学

Background Improper settings of outdoor smoking points in public places may increase the risk of secondhand smoke exposure among the population. Conducting research on air pollution in and around smoking spots and related influencing factors can provide valuable insights for optimizing the setting of outdoor smoking points. Objective To investigate the influence of the number of smokers at outdoor smoking points and the distance on the diffusion characteristics of surrounding air pollutants, in order to optimize the setting of outdoor smoking points. Methods Surrounding the exhibition halls in the China International Import Expo (CIIE), two outdoor smoking points were randomly selected, one on the first floor (ground level) and the other on the second floor (16 m above ground), respectively. At 0, 3, 6, and 9 m from the smoking points in the same direction, validated portable air pollutant monitors were used to measure the real-time fine particulate matter (PM2.5) and carbon dioxide (CO2) concentrations for consecutive 5 d during the exhibition, as well as the environmental meteorological factors at 0 m with weather meters including wind speed, wind direction, and air pressure. An open outdoor atmospheric background sampling point was selected on each of the two floors to carry out parallel sampling. Simultaneously, the number of smokers at each smoking point were double recorded per minute. The relationships between the number of smokers, distance from the smoking points, and ambient PM2.5 and CO2 concentrations were evaluated by generalized additive regression models for time-series data after adjustment of confounders such as temperature, relative humidity, and wind speed. Results The median numbers of smokers at smoking points on the first and second floors were 6 [interquartile range (IQR): 3, 9] and 9 (IQR: 6, 13), respectively. Windless (wind speed <0.6 m·s−1) occupied most of the time (85.9%) at both locations. The average concentration of ambient PM2.5 at the smoking points (0 m) [mean ± standard deviation, (106±114) μg·m−3] was 4.2 times higher than that of the atmospheric background [(25±7) μg·m−3], the PM2.5 concentration showed a gradient decline with the increase of distance from the smoking points, and the average PM2.5 concentration at 9 m points [(35±22) μg·m−3] was close to the background level (1.4 times higher). The maximum concentration of CO2 [(628±23) μmol·mol−1] was observed at 0 m, and its average value was 1.3 times higher than that of the atmospheric background [(481±40) μmol·mol−1], and there was no gradient decrease in CO2 concentration with increasing distance at 0, 3, 6, and 9 m points. The regression analyses showed that, taking smoking point as the reference, every 3 m increase in distance was associated with a decrease of ambient PM2.5 by 24.6 [95% confidence interval (95%CI): 23.5, 25.8] μg·m−3 (23.2%) and CO2 by 54.1 (95%CI: 53.1, 55.1) μmol·mol−1 (8.6%). Every one extra smoker at the smoking point was associated with an average increase of PM2.5 and CO2 by 2.0 (95%CI: 1.7, 2.8) μg·m−3 and 1.0 (95%CI: 0.7，1.2) μmol·mol−1, respectively. The sensitivity analysis indicated that, under windless conditions, the concentrations of PM2.5 and CO2 at the smoking points were even higher but the decreasing and dispersion characteristics remained consistent. Conclusion Outdoor smoking points could significantly increase the PM2.5 concentrations in the surrounding air and the risks of secondhand smoke exposure, despite of the noticeable decreasing trend with increasing distance. Considering the inevitable poor dispersion conditions such as windless and light wind, outdoor smoking points are recommended to be set at least 9 m or farther away from non-smoking areas.

Three-dimensional finite element modeling and mechanical analysis of knee joint in patients with mild knee osteoarthritis / 中国医学物理学杂志

Objective To establish a three-dimensional finite element model of knee joint in patients with mild knee osteoarthritis in the absence of CT and MRI with thin layer thickness,and to analyze the stress distributions of the tibial plateau.Methods A female patient with mild knee osteoarthritis was selected as the study object,and received serial CT scan from pelvis to distal tibia of fibula.The obtained files in DICOM format were imported into Mimics software for extracting the bony structures of knee joint through threshold segmentation,and then optimizing the extracted structures with Edit Masks,Cavity Fill and Region Grow.The generated model of bony structures was imported into 3-matic for smoothing and wrapping,and Geomagic Wrap was used for bony structure processing with mesh doctor inspection,surface defect repair and surface fitting.The cartilages,meniscus and ligaments were established by contour extension,and assembled with bony structures in SolidWorks in the way of origin coincidence.After defining material properties and contact relationships,meshing,and setting constraints and loads in ANSYS software,the stress distributions of the tibial plateau when standing with both legs were analyzed.Results A complete knee joint model including bony structure,cartilage and ligament was successfully established.When standing with two legs,the peak value of contact stress was about 1.21 MPa,and the maximum stress was 0.72 MPa at the medial middle of tibial plateau and lateral tibial plateau.The 62.7%and 37.3%of the total load were borne by the inner and outer compartments.Conclusion The model of the total knee joint is established with CT extraction and software rendering,and the finite element analysis results meet clinical expectations,indicating that the model established by the proposed method is reliable and can be used for follow-up research.

Efficacy and safety of three-dimensional visualization technology in assisting ablation therapy for hepatocellular carcinoma： A Meta-analysis / 临床肝胆病杂志

ObjectiveTo systematically evaluate the efficacy and safety of three-dimensional visualization technology in assisting ablation therapy for hepatocellular carcinoma. MethodsThis study was conducted according to PRISMA guidelines， with a PROSPERO registration number of CRD42023488398. PubMed， Embase， Web of Science， the Cochrane Library， CNKI， Wanfang Data， VIP， and CBM were searched for Chinese and English articles on three-dimensional visualization technology in assisting ablation therapy for hepatocellular carcinoma published up to March 2023. After quality assessment and data extraction of the studies included， RevMan 5.4 software was used to perform the meta-analysis. ResultsA total of 11 studies were included， with 972 patients in total， among whom 447 underwent ablation assisted by three-dimensional visualization technology （3D group） and 525 underwent ablation assisted by traditional two-dimensional imaging technology （2D group）. The meta-analysis showed that compared with the 2D group， the 3D group had significantly higher success rate of first-time ablation treatment （odds ratio ［OR］=5.43， 95% confidence interval ［CI］： 2.64‍ ‍—‍ ‍11.18， P<0.001）， technical efficiency （OR=6.15， 95%CI： 3.23‍ ‍—‍ ‍11.70， P<0.001）， and complete ablation rate （OR=2.50， 95%CI： 1.08‍ ‍—‍ ‍5.78， P=0.03）， as well as significantly lower incidence rate of major complications （OR=0.45， 95%CI： 0.24‍ ‍—‍ ‍0.87， P=0.02）， local recurrence rate （OR=0.35， 95%CI： 0.17‍ ‍—‍ ‍0.72， P=0.004）， and local tumor progression rate （OR=0.29， 95%CI： 0.16‍ ‍—‍ ‍0.50， P<0.001）， while there was no significant difference in the incidence rate of mild complications between the two groups （P>0.05）. ConclusionThree-dimensional visualization technology is safe and feasible in assisting ablation therapy for hepatocellular carcinoma and can improve ablation rate and reduce the incidence rate of serious complications， local recurrence rate， and local tumor progression rate， thereby showing an important application value in clinical practice.

Hepatic transcriptome delineates the therapeutic effects of Sanren Tang on high-fat diet-induced non-alcoholic fatty liver disease.

OBJECTIVE: To evaluate the effects of Sanren Tang (SRT, ) on a high-fat diet (HFD)-induced non-alcoholic fatty liver disease (NAFLD) in mice and to investigate the hepatic transcriptome regulated by SRT. METHODS: The primary SRT components were identified using ultra-high-performance liquid chromatography-high-resolution accurate mass spectrometry. The SRT-induced pharmacological effects on HFD-induced NAFLD were evaluated in mice for 16 weeks. Obeticholic acid was used as a control drug. Body weight, food intake, and homeostatic model assessment for insulin resistance (HOMA-IR) index were analysed. Hepatic histological changes were observed in haematoxylin and eosin-stained sections and quantified using the NAFLD activity score (NAS). Serum alanine aminotransferase (ALT) and hepatic triglyceride (TG) levels were measured. Lipids in hepatocytes were visualised by Oil red staining. RNA-sequencing was performed to determine the transcriptome profile of the liver tissue. The differentially expressed genes were validated using real-time polymerase chain reaction and Western blotting. RESULTS: Four principal compounds were identified in the SRT: adenosine, amygdalin, luteoloside, and magnolol. SRT ameliorated hepatic histology and lipid deposition in the NAFLD mice, and decreased HOMA-IR, NAS and ALT, and hepatic TG levels. Hepatic transcriptome analysis revealed 232 HFD-regulated genes that were reversed by SRT simultaneously. Retinol metabolism, cytokine-cytokine receptor interaction, and peroxisome proliferator-activated receptor (PPAR) γ signalling were the top three SRT-regulated pathways in NAFLD. CONCLUSIONS: SRT significantly ameliorated HFD-induced NAFLD, which was correlated with the regulation of genes enriched in the retinol metabolism, cytokine-cytokine receptor interaction, and PPARγ signalling pathways.

Monitoring and management of abandoned, lost and discarded fishing gear (ALDFG) in Penghu Islands, Taiwan.

This study investigated the conditions of abandoned, lost, discarded fishing gear (ALDFG) in natural and artificial reef zones and removed it afterward in Penghu Islands. Various feasible suggestions for improving ALDFG management were proposed for the county government to manage and reduce the generation of ALDFG in the future and maintain the marine ecosystem. This study divided the ocean areas of Penghu into five sub-areas for carrying out research and surveys. 165 boat trips of ALDFG investigation and removal were conducted from July 2018 to October 2019. The results show the ALDFG in natural reef areas is mostly large-mesh gillnets (26 %). The rest are single-layer bottom gillnets (21 %) and multi-layer bottom gillnets (20 %). In line with the recent efforts of the Penghu County Government to address ALDFG, it is recommended that the participation of citizen scientists and the promotion of ocean education can be utilized for fishery co-management in Penghu.

Systematic analyzing a five- miRNA panel and its diagnostic value of plasma expression in colorectal cancer.

BACKGROUND: Aberrant expression of miRNAs have been implicated in cancers, but the role of miRNAs in colorectal cancer (CRC) remains need to be elucidated. This study aimed to identify miRNAs that related to colorectal cancer (CRC) pathogenesis and determine the diagnostic value. METHODS: Three GEO datasets (GSE128449, GSE35602 and GSE49246) with 131 samples were used to screen miRNAs that differential expression between tumor and control tissues. The expression of the identified miRNAs was validated in 50 clinical tissue samples and the GSE35834 dataset. The clinical significance of these miRNAs was analyzed in the TCGA dataset and clinical tissue samples. The expression of miRNAs in tissues and plasma samples were tested by RT-PCR assay in clinical samples, and their diagnostic value was determined. RESULTS: The analysis of three GEO datasets revealed that miR-595 and miR-1237 were upregulated, while miR-126, miR-139, and miR-143 were downregulated in CRC tissues compared to control tissues. The differential expression of the five miRNAs in CRC tissues was confirmed using clinical tissue samples and GEO databases. There was no significant correlation between the TNM stage and tumor stage of CRC and any of the five miRNAs. Plasma expression of the miRNAs differed significantly between CRC and non-cancer patients, and each miRNA had moderate diagnostic value for CRC. Combining the five miRNAs provided better diagnostic potential for CRC than a single miRNA. CONCLUSIONS: This study demonstrated that five miRNAs were related to the pathogenesis of CRC, but independent of the stage of CRC; Plasma expression of these miRNAs have moderate diagnostic value, and combination of these miRNAs showed better diagnostic ability in CRC.

Advances on the microbial synthesis of plant-derived diterpenoids / 生物工程学报

Natural plant-derived diterpenoids are a class of compounds with diverse structures and functions. These compounds are widely used in pharmaceuticals, cosmetics and food additives industries because of their pharmacological properties such as anticancer, anti-inflammatory and antibacterial activities. In recent years, with the gradual discovery of functional genes in the biosynthetic pathway of plant-derived diterpenoids and the development of synthetic biotechnology, great efforts have been made to construct a variety of diterpenoid microbial cell factories through metabolic engineering and synthetic biology, resulting in gram-level production of many compounds. This article summarizes the construction of plant-derived diterpenoid microbial cell factories through synthetic biotechnology, followed by introducing the metabolic engineering strategies applied to improve plant-derived diterpenoids production, with the aim to provide a reference for the construction of high-yield plant-derived diterpenoid microbial cell factories and the industrial production of diterpenoids.

Microdeletions and vertical transmission of the Y-chromosome azoospermia factor region / 亚洲男科学杂志(英文版)

Spermatogenesis is regulated by several Y chromosome-specific genes located in a specific region of the long arm of the Y chromosome, the azoospermia factor region (AZF). AZF microdeletions are the main structural chromosomal abnormalities that cause male infertility. Assisted reproductive technology (ART) has been used to overcome natural fertilization barriers, allowing infertile couples to have children. However, these techniques increase the risk of vertical transmission of genetic defects. Despite widespread awareness of AZF microdeletions, the occurrence of de novo deletions and overexpression, as well as the expansion of AZF microdeletion vertical transmission, remains unknown. This review summarizes the mechanism of AZF microdeletion and the function of the candidate genes in the AZF region and their corresponding clinical phenotypes. Moreover, vertical transmission cases of AZF microdeletions, the impact of vertical inheritance on male fertility, and the prospective direction of research in this field are also outlined.

Clinical Value of Translocator Protein Gene in Evaluating the Efficacy of FLT3-ITD/DNMT3A R882 Double-Mutated Acute Myeloid Leukemia / 中国实验血液学杂志

OBJECTIVE@#To observe the clinical significance of translocator proteins (TSPO) gene in the treatment of FLT3-ITD/DNMT3A R882 double-mutated acute myeloid leukemia (AML).@*METHODS@#Seventy-six patients with AML hospitalized in the Department of Hematology of the Affiliated People's Hospital of Ningbo University from June 2018 to June 2020 were selected, including 34 patients with FLT3-ITD mutation, 27 patients with DNMT3A R882 mutation, 15 patients with FLT3-ITD/DNMT3A R882 double mutation, as well as 19 patients with immune thrombocytopenia (ITP) hospitalized during the same period as control group. RNA was routinely extracted from 3 ml bone marrow retained during bone puncture, and TSPO gene expression was detected by transcriptome sequencing (using 2-deltadeltaCt calculation).@*RESULTS@#The expression of TSPO gene in FLT3-ITD group and DNMT3A R882 group at first diagnosis was 2.02±1.04 and 1.85±0.76, respectively, which were both higher than 1.00±0.06 in control group, but the differences were not statistically significant (P=0.671, P=0.821). The expression of TSPO gene in the FLT3-ITD/DNMT3A R882 group was 3.98±1.07, wich was significantly higher than that in the FLT3-ITD group and DNMT3A R882 group, the differences were statistically significant (P=0.032, P=0.021). The expression of TSPO gene in patients who achieved complete response after chemotherapy in the FLT3-ITD/DNMT3A R882 group was 1.19±0.87, which was significantly lower than that at first diagnosis, and the difference was statistically significant (P=0.011).@*CONCLUSION@#TSPO gene may be used as an indicator of efficacy in FLT3-ITD /DNMT3A R882 double-mutated AML.