ABSTRACT
Luminescent solar concentrators (LSCs) concentrate light via luminescence within a planar-waveguide and have potential use for building-integrated photovoltaics. However, their commercialization and potential applications are currently hindered greatly by photon reabsorption, where emitted waveguided light is parasitically reabsorbed by a luminophore. Nanotetrapod semiconductor materials have been theorized to be excellent luminophores for LSCs owing to their inherently large Stokes shifts. Here we present the first nanotetrapod-based LSCs (5 × 5 × 0.3 cm3) reported in the literature. External quantum efficiencies as high as 4.9 ± 0.5% were achieved under AM1.5G conditions. We also perform an in-depth investigation by optical characterization of the different operational metrics of our nanotetrapod-based LSCs and show reabsorption to be eliminated (mean number of average reabsorption events per photon equal to 0.00) in our most extended nanotetrapod devices.
ABSTRACT
The lighting industry currently accounts for a significant proportion of all energy demand. Luminescent white lighting is often impure, inefficient, expensive, and detrimentally emits as a point source, meaning the light is emitted from a focused point. A luminescent light diffuser offers the potential to create a spatially broad lighting fixture. We developed a luminescent light diffuser consisting of three commercially available luminescent dye species (rhodamine 6G, fluorescein, 7-diethylamino-4-methylcoumarin) dispersed within a polymer matrix (polyvinyl alcohol), or commercial paint, and coated on a planar waveguide. A Light-emitting diode (LED) (385 nm) is directed into the waveguide which excites the luminescent species, coating the panel, creating a device that emits spatially broad pure white light. As the emission depends on escape cone emission from the waveguide, the device's emission was found to depend highly on the coating film quality and components. We present two systems: a small 40 mm × 40 mm prototype, made using standard water-soluble polymer (polyvinyl alcohol), to study the underlying operational principles, and a 100 mm × 100 mm device with optimized efficiency fabricated with a clear commercial paint. By doping the polymer matrix with scattering silica microparticles we achieved a maximum photon outcoupling efficiency of 78%, whilst maintaining colour purity with an increased device size of more than 300 times (compared with the input LED). This work shows that it is possible to construct an inexpensive and spatially broad lighting source, whilst maintaining colour purity at a low cost.
Subject(s)
Lighting , Polyvinyl Alcohol , Luminescence , Light , PolymersABSTRACT
Hybrid nanomaterials (HNs), the combination of organic semiconductor ligands attached to nanocrystal semiconductor quantum dots, have applications that span a range of practical fields, including biology, chemistry, medical imaging, and optoelectronics. Specifically, HNs operate as discrete, tunable systems that can perform prompt fluorescence, energy transfer, singlet fission, upconversion, and/or thermally activated delayed fluorescence. Interest in HNs has naturally grown over the years due to their tunability and broad spectrum of applications. This Review presents a brief introduction to the components of HNs, before expanding on the characterization and applications of HNs. Finally, the future of HN applications is discussed.
ABSTRACT
Cesium lead halide perovskite nanocrystals exhibit high photoluminescence quantum efficiencies and tunability across the visible spectrum. This makes these crystals ideal candidates for solar panels, light-emitting diodes, lasers, and especially nanolasers. Due to the versatility of cation substitution in perovskite nanocrystals, they can be grown on amine-functionalized silicon dioxide nanoparticles, where the amine linker replaces the standard cation structure. Selectively growing luminescent nanocrystals on spherical silicon dioxide microspheres results in the opportunity to populate whispering-gallery modes in these spherical silica microspheres. In this case, the nanocrystal halide composition can be used to selectively tune the emission wavelength mode, and microsphere radius to tune the mode spacing. This silicon dioxide attachment also adds to the overall stability of the system. Through photoluminescence microscopy measurements, we show whispering gallery modes in individual perovskite-coated microspheres for CsPbBr3 and CsPbI3 nanocrystals on 9.2 µm diameter silica spheres and compare these to theoretically predicted optical modes. In CsPbBr3, we provide evidence that these modes will lase under optical excitation, with a threshold of 750 µJ/cm2. This study presents a novel system that, through optimization, could be a promising pathway to achieve facile and stable perovskite nanolasers.
