ABSTRACT
As novel absorber materials are developed and screened for their photovoltaic (PV) properties, the challenge remains to reproducibly test promising candidates for high-performing PV devices. Many early-stage devices are prone to device shunting due to pinholes in the absorber layer, producing "false-negative" results. Here, we demonstrate a device engineering solution toward a robust device architecture, using a two-step absorber deposition approach. We use tin sulfide (SnS) as a test absorber material. The SnS bulk is processed at high temperature (400 °C) to stimulate grain growth, followed by a much thinner, low-temperature (200 °C) absorber deposition. At a lower process temperature, the thin absorber overlayer contains significantly smaller, densely packed grains, which are likely to provide a continuous coating and fill pinholes in the underlying absorber bulk. We compare this two-step approach to the more standard approach of using a semi-insulating buffer layer directly on top of the annealed absorber bulk, and we demonstrate a more than 3.5× superior shunt resistance Rsh with smaller standard error σRsh. Electron-beam-induced current (EBIC) measurements indicate a lower density of pinholes in the SnS absorber bulk when using the two-step absorber deposition approach. We correlate those findings to improvements in the device performance and device performance reproducibility.
ABSTRACT
Tin sulfide (SnS) is a candidate absorber material for Earth-abundant, non-toxic solar cells. SnS offers easy phase control and rapid growth by congruent thermal evaporation, and it absorbs visible light strongly. However, for a long time the record power conversion efficiency of SnS solar cells remained below 2%. Recently we demonstrated new certified record efficiencies of 4.36% using SnS deposited by atomic layer deposition, and 3.88% using thermal evaporation. Here the fabrication procedure for these record solar cells is described, and the statistical distribution of the fabrication process is reported. The standard deviation of efficiency measured on a single substrate is typically over 0.5%. All steps including substrate selection and cleaning, Mo sputtering for the rear contact (cathode), SnS deposition, annealing, surface passivation, Zn(O,S) buffer layer selection and deposition, transparent conductor (anode) deposition, and metallization are described. On each substrate we fabricate 11 individual devices, each with active area 0.25 cm(2). Further, a system for high throughput measurements of current-voltage curves under simulated solar light, and external quantum efficiency measurement with variable light bias is described. With this system we are able to measure full data sets on all 11 devices in an automated manner and in minimal time. These results illustrate the value of studying large sample sets, rather than focusing narrowly on the highest performing devices. Large data sets help us to distinguish and remedy individual loss mechanisms affecting our devices.
Subject(s)
Solar Energy , Sulfides/chemistry , Tin Compounds/chemistry , VolatilizationABSTRACT
Managing the metabolic needs of the patient with obesity is a challenge unto itself without the added demands of accounting for an altered gastrointestinal tract. Nevertheless, with about 200,000 bariatric procedures being performed annually in the United States, clinicians must be prepared to manage the critically ill bariatric surgery patient. This article reviews the recent literature relating to nutrient needs and metabolic support for the bariatric patient. Bariatric patients are at risk for several micronutrient deficiencies, including vitamins D and B12, calcium, and iron; some bariatric procedures affect macronutrient needs as well. Literature on nutrition support guidelines for the bariatric population is limited. However, with an understanding of the anatomical and physiological effects of bariatric surgery, recent guidelines for critically ill patients with obesity can be applied to the bariatric surgery population. The unique needs of the bariatric population, such as susceptibility to micronutrient deficiencies and specialized access routes, must be considered to provide safe and efficacious nutrition support. Further research is necessary to develop specific nutrition support recommendations for the bariatric population.
Subject(s)
Bariatric Surgery/adverse effects , Diet, Reducing , Evidence-Based Medicine , Obesity/diet therapy , Postoperative Complications/prevention & control , Practice Guidelines as Topic , Combined Modality Therapy , Comorbidity , Diet, Reducing/adverse effects , Dietetics/trends , Gastrointestinal Tract/physiopathology , Gastrointestinal Tract/surgery , Humans , Obesity/epidemiology , Obesity/physiopathology , Obesity/surgery , United States/epidemiology , Weight Loss , WorkforceABSTRACT
Tin sulfide (SnS), as a promising absorber material in thin-film photovoltaic devices, is described. Here, it is confirmed that SnS evaporates congruently, which provides facile composition control akin to cadmium telluride. A SnS heterojunction solar cell is demons trated, which has a power conversion efficiency of 3.88% (certified), and an empirical loss analysis is presented to guide further performance improvements.