Membrane Condensation and Curvature Induced by SARS-CoV-2 Envelope Protein.

The envelope (E) protein of SARS-CoV-2 participates in virion encapsulation and budding at the membrane of the endoplasmic reticulum Golgi intermediate compartment (ERGIC). The positively curved membrane topology required to fit an 80 nm viral particle is energetically unfavorable; therefore, viral proteins must facilitate ERGIC membrane curvature alteration. To study the possible role of the E protein in this mechanism, we examined the structural modification of the host lipid membrane by the SARS-CoV-2 E protein using synchrotron-based X-ray methods. Our reflectometry results on solid-supported planar bilayers show that E protein markedly condenses the surrounding lipid bilayer. For vesicles, this condensation effect differs between the two leaflets such that the membrane becomes asymmetric and increases its curvature. The formation of such a curved and condensed membrane is consistent with the requirements to stably encapsulate a viral core and supports a role for E protein in budding during SARS-CoV-2 virion assembly.

Investigating bolalipids as solubilizing agents for poorly soluble drugs: Effects of alkyl chain length on solubilization and cytotoxicity.

Synthetic single-chain bolalipids with symmetrical headgroups have shown potential in various pharmaceutical applications, such as the stabilization of liposome bilayers. Despite their amphiphilic character, synthetic bolalipids have not yet been investigated for their suitability as solubilizing agents for poorly soluble drug compounds. In this study, three synthetic single-chain bolalipids with increasing alkyl chain lengths (C22, C24 and C26) were investigated. All three bolalipids were able to achieve an increased solubility of the model drug, mefenamic acid, by approximately 180% in a pH 7.4 buffer compared to only a 102-105% increase achieved by sodium dodecyl sulfate (SDS) or the non-ionic surfactant pegylated hydroxystearate (PEG-HS). Subsequently, interfacial activity of bolalipids and their ability to destabilize liposomal bilayers were investigated. The C22 bolalipid exhibited a consistently lower interfacial activity, which was consistent with its significantly lower cytotoxicity in the macrophage-like cell line, J774. A1, compared to C24 and C26 counterparts. The mean IC50 values of the bolalipids tested (0.035-0.093 mM) were approximately 4-100-fold lower than that of SDS (0.401 mM) or PEG-HS (0.922 mM), with the mechanism of toxicity linked to increased cell membrane permeability, as is expected for surfactants. In summary, evidence from this study shows that decreasing the length of the bolalipid alkyl linker from C26 to C22 resulted in a significantly decreased cytotoxicity with no loss in drug solubilization efficiency.

Ultrasound-Responsive Smart Drug Delivery System of Lipid Coated Mesoporous Silica Nanoparticles.

The immediate release of chemotherapeutics at the target site, along with no premature release in circulation is always challenging. The purpose of this study was to develop a stimuli responsive drug delivery system, composed of lipid supported mesoporous silica nanoparticles (MSNPs) for triggered drug release at the target site and simultaneously avoiding the premature release. MSNPs with a higher drug loading capacity and very slow release were designed so as to enhance release by FDA approved US-irradiation. Doxorubicin, as a model drug, and perfluoropentane (PFP) as a US responsive material, were entrapped in the porous structure of MSNPs. Lipid coating enhanced the cellular uptake and in addition provided a gatekeeping effect at the pore opening to reduce premature release. The mechanical and thermal effects of US induced the conversion of liquid PFP to a gaseous form that was able to rupture the lipid layer, resulting in triggered drug release. The prolonged stability profile and non-toxic behavior made them suitable candidate for the delivery of anticancer drugs. This smart system, with the abilities of better cellular uptake and higher cytotoxic effects on US-irradiation, would be a good addition to the applied side of chemotherapeutic advanced drug delivery systems.

In vitro Fourier transform infrared spectroscopic study of the effect of glycerol on the uptake of beclomethasone dipropionate in living respiratory cells.

The quantification of drug in living cells is of increasing interest in pharmaceutical research because of its importance in understanding drug efficacy and toxicity. Label-free in situ measurement methods are advantageous for their ability to obtain chemical and time profiles without the need of labelling or extraction steps. We have previously shown that Fourier transform infrared (FTIR) spectroscopy has the potential to quantify drug in situ within living cells at micromolar level when a simple solution of drug was added to the medium. The purpose of this study was to demonstrate that the approach can evaluate more complex systems such as the effect of membrane modification by a formulation on drug uptakes. The inhaled corticosteroid, beclomethasone dipropionate (BDP), in Calu-3 respiratory epithelial cells in the absence and presence of glycerol, an excipient in some inhaled medicines was used as the model system. The FTIR method was first validated for limit of detection (LOD) and quantification (LOQ) according to published guidelines and the LOQ was found to be âˆ¼ 20 µM, good enough to quantify BDP in the living cell. The uptake of BDP by living Calu-3 cells was found to be reduced in the presence of glycerol as expected due to the stiffening of the cell membrane by the presence of glycerol in the formulation. This study demonstrates the valuable analytical capability of live-cell FTIR to study the effect of formulation on drug transport in lungs and to evaluate drug availability to intracellular targets. We conclude that FTIR has potential to contribute widely at the frontier of live-cell studies.

Lipid domain formation and non-lamellar structures associated with varied lysylphosphatidylglycerol analogue content in a model Staphylococcal plasma membrane.

Dipalmitoyl-3-aza-dehydroxy-lysylphosphatidylglycerol (DP3adLPG), is a chemically stable synthetic analogue of the bacterial lipid lysylphosphatidylglycerol (LPG), designed as a substitute for the notoriously labile native lipid in biophysical investigations. In Staphylococcus aureus, LPG is known to play a role in resistance to antibiotics by altering membrane charge properties in response to environmental stress, but little is known about how LPG influences other bilayer physicochemical properties or lateral organisation, through the formation of complexes with lipids such as phosphatidylglycerol (PG). In this study we have investigated the different phases formed by biomimetic mixtures of 3adLPG and PG in different thermotropic states, using neutron diffraction and electron microscopy. In a DPPG/DP3adLPG 70:30 mol% mixture, two distinct lamellar phases were observed below the lipid melting transition: Lß' 1 and Lß' 2 with respective periodicities of 82 and 62 Å. Increasing the proportion of DP3adLPG to mimic the effects of environmental stress led to the disappearance of the Lß' 1 phase and the formation of an inverse hexagonal phase. The compositions of these different phases were identified by investigating the thermotropic properties of the two mixtures, and probing their interaction with the antimicrobial peptide magainin 2 F5W. We propose that the observed polymorphism results from the preferential formation of either triplet PG-3adLPG-PG, or paired PG-3adLPG complexes, dependent upon the mixing proportions of the two lipids. The relevance of these findings to the role native LPG in S. aureus, are discussed with respect to their influence on antibiotic resistance and lateral membrane organisation.

Ambient PM2.5 exposure and rapid spread of COVID-19 in the United States.

It has been posited that populations being exposed to long-term air pollution are more susceptible to COVID-19. Evidence is emerging that long-term exposure to ambient PM2.5 (particulate matter with aerodynamic diameter 2.5 µm or less) associates with higher COVID-19 mortality rates, but whether it also associates with the speed at which the disease is capable of spreading in a population is unknown. Here, we establish the association between long-term exposure to ambient PM2.5 in the United States (US) and COVID-19 basic reproduction ratio R0- a dimensionless epidemic measure of the rapidity of disease spread through a population. We inferred state-level R0 values using a state-of-the-art susceptible, exposed, infected, and recovered (SEIR) model initialized with COVID-19 epidemiological data corresponding to the period March 2-April 30. This period was characterized by a rapid surge in COVID-19 cases across the US states, implementation of strict social distancing measures, and a significant drop in outdoor air pollution. We find that an increase of 1 µg/m3 in PM2.5 levels below current national ambient air quality standards associates with an increase of 0.25 in R0 (95% CI: 0.048-0.447). A 10% increase in secondary inorganic composition, sulfate-nitrate-ammonium, in PM2.5 associates with ≈10% increase in R0 by 0.22 (95% CI: 0.083-0.352), and presence of black carbon (soot) in the ambient environment moderates this relationship. We considered several potential confounding factors in our analysis, including gaseous air pollutants and socio-economical and meteorological conditions. Our results underscore two policy implications - first, regulatory standards need to be better guided by exploring the concentration-response relationships near the lower end of the PM2.5 air quality distribution; and second, pollution regulations need to be continually enforced for combustion emissions that largely determine secondary inorganic aerosol formation.

Nanomaterials fusing with the skin: Alpha-tocopherol phosphate delivery into the viable epidermis to protect against ultraviolet radiation damage.

Vitamin E (alpha tocopherol, α-T) is an important skin antioxidant, but its penetration into the viable epidermis, where it acts, is very limited. This study investigated if phosphorylating α-tocopherol (α-TP) to form a provitamin, improved its interactions with skin, its passage into the tissue, and thus its ability to protect the skin from ultraviolet radiation (UVR) damage. At pH 7.4, when the α-TPO4-1 microspecies predominated in solution, dynamic light scattering measurements showed that α-TP formed nanoaggregates with a median hydrodynamic diameter of 9 nm (Critical aggregation constant, CAC, - 4.2 mM). At 9.0 when the α-TPO4-2 microspecies predominated there was no aggregation. The passage of α-TP nanoaggregates through regenerated cellulose membranes was significantly slower than the α-TP monomers (at pH 9) suggesting that aggregation slowed diffusion. However, a lotion formulation containing the nanoaggregates delivered more α-TP into the skin compared to the formulation containing the monomers. In addition, the nanosized α-TP aggregates delivered 8-fold more active into the stratum corneum (SC) (252.2 µg/cm2 vs 29.5 µg/cm2) and 4 fold more active into the epidermis (85.1 µg/cm2 vs 19 µg/cm2, respectively, p < 0.05) compared to α-T. Langmuir subphase injection studies at pH 7.4 (surface pressure 10 mN m-1) showed that the α-TP nanoaggregates more readily fused with the SC compared to the monomers and the membrane compression studies demonstrated that α-TP fluidised the SC lipids. Together the fusion with the SC and its fluidisation were proposed as the causes of the better α-TP penetration into the skin, which enhanced potential of α-TP to protect from UVR-induced skin damage compared to α-T.

Morphology of bile salts micelles and mixed micelles with lipolysis products, from scattering techniques and atomistic simulations.

HYPOTHESES: Bile salts (BS) are biosurfactants released into the small intestine, which play key and contrasting roles in lipid digestion: they adsorb at interfaces and promote the adsorption of digestive enzymes onto fat droplets, while they also remove lipolysis products from that interface, solubilising them into mixed micelles. Small architectural variations on their chemical structure, specifically their bile acid moiety, are hypothesised to underlie these conflicting functionalities, which should be reflected in different aggregation and solubilisation behaviour. EXPERIMENTS: The micellisation of two BS, sodium taurocholate (NaTC) and sodium taurodeoxycholate (NaTDC), which differ by one hydroxyl group on the bile acid moiety, was assessed by pyrene fluorescence spectroscopy, and the morphology of aggregates formed in the absence and presence of fatty acids (FA) and monoacylglycerols (MAG) - typical lipolysis products - was resolved by small-angle X-ray/neutron scattering (SAXS, SANS) and molecular dynamics simulations. The solubilisation by BS of triacylglycerol-incorporating liposomes - mimicking ingested lipids - was studied by neutron reflectometry and SANS. FINDINGS: Our results demonstrate that BS micelles exhibit an ellipsoidal shape. NaTDC displays a lower critical micellar concentration and forms larger and more spherical aggregates than NaTC. Similar observations were made for BS micelles mixed with FA and MAG. Structural studies with liposomes show that the addition of BS induces their solubilisation into mixed micelles, with NaTDC displaying a higher solubilising capacity.

Antibiotic-in-Cyclodextrin-in-Liposomes: Formulation Development and Interactions with Model Bacterial Membranes.

Gram-negative bacteria possess numerous defenses against antibiotics, due to the intrinsic permeability barrier of their outer membrane (OM), explaining the recalcitrance of some common and life-threatening infections. We report the formulation of a new drug, PPA148, which shows promising activity against all Gram-negative bacteria included in the ESKAPEE pathogens. PPA148 was solubilized by inclusion complexation with cyclodextrin followed by encapsulation in liposomes. The complex and liposomal formulation presented increased activity against E. coli compared to the pure drug when assessed with the Kirby Bauer assay. The novel formulation containing 1 µg PPA148 reached similar efficacy levels equivalent to those of 30 µg of pure rifampicin. A range of biophysical techniques was used to explore the mechanism of drug uptake. Langmuir trough (LT) and neutron reflectivity (NR) techniques were employed to monitor the interactions between the drug and the formulation with model membranes. We found evidence for liposome fusion with the model Gram-negative outer membrane and for cyclodextrins acting as inner membrane (IM) permeation enhancers without presenting intrinsic antimicrobial activity. An antibiotic-in-cyclodextrin-in-liposomes (ACL) formulation was developed, which targets both the bacterial OM and IM, and offers promise as a means to breach the Gram-negative cell envelope.

Phase Diagram for a Lysyl-Phosphatidylglycerol Analogue in Biomimetic Mixed Monolayers with Phosphatidylglycerol: Insights into the Tunable Properties of Bacterial Membranes.

Ion pairing between the major phospholipids of the Staphylococcus aureus plasma membrane (phosphatidylglycerol - PG and lysyl-phosphatidylglycerol - LPG) confers resistance to antimicrobial peptides and other antibiotics. We developed 3adLPG, a stable synthetic analogue which can substitute for the highy-labile native LPG, in biophysical experiments examining the membrane-protecting role of lipid ion pairing, in S. aureus and other important bacteria. Here we examine the surface charge and lipid packing characteristics of synthetic biomimetic mixtures of DPPG and DP3adLPG in Langmuir monolayers, using a combination of complementary surface-probing techniques such as infrared reflection-absorption spectroscopy and grazing-incidence x-ray diffraction. The resultant phase diagram for the ion paired lipids sheds light on the mixing behavior of lipids in monolayer models of resistant phenotype bacterial membranes, and provides a platform for future biophysical studies.

Interactions of bile salts with a dietary fibre, methylcellulose, and impact on lipolysis.

Methylcellulose (MC) has a demonstrated capacity to reduce fat absorption, hypothetically through bile salt (BS) activity inhibition. We investigated MC cholesterol-lowering mechanism, and compared the influence of two BS, sodium taurocholate (NaTC) and sodium taurodeoxycholate (NaTDC), which differ slightly by their architecture and exhibit contrasting functions during lipolysis. BS/MC bulk interactions were investigated by rheology, and BS behaviour at the MC/water interface studied with surface pressure and ellipsometry measurements. In vitro lipolysis studies were performed to evaluate the effect of BS on MC-stabilised emulsion droplets microstructure, with confocal microscopy, and free fatty acids release, with the pH-stat method. Our results demonstrate that BS structure dictates their interactions with MC, which, in turn, impact lipolysis. Compared to NaTC, NaTDC alters MC viscoelasticity more significantly, which may correlate with its weaker ability to promote lipolysis, and desorbs from the interface at lower concentrations, which may explain its higher propensity to destabilise emulsions.

Enhanced chain packing achieved via putative headgroup ion-triplet formation in binary anionic lipid/cationic surfactant mixed monolayers.

Lipid/surfactant miscibility was investigated in monolayers composed of binary mixtures of dipalmitoylphosphatidylglycerol (DPPG) and dihexadecyldimethylammonium bromide (DHDAB). Langmuir monolayers formed from biomimetic DPPG/DHDAB mixtures based on the anionic:cationic lipid ratios observed in the bacterium Staphylococcus aureus (7:3 and 1:1) were examined alongside those of the pure amphiphiles and a surfactant rich 3:7 mixture. Using a combination of GIXD, TRXF and IRRAS, DPPG/DHDAB 1:1 monolayers were found to form a more stabilised condensed phase compared to pure DPPG, which was composed entirely of electrostatically neutral ion pairs, analogous to the so-called catanionic amphiphiles spontaneously formed by single-chain surfactants with opposing headgroup charges. Despite the lack of lateral charge repulsion the ion paired phase of DPPG/DHDAB exhibited slightly looser chain packing that was observed for DPPG indicating a significant steric effect on packing geometry caused by ion pair formation. Surprisingly, the 7:3 mixture of DPPG/DHDAB formed a completely condensed phase, with no isotherm transitions, in which the chain packing was significantly closer than was found for either DPPG or the totally ion paired monolayer. It is postulated that this mixture forms a distinct DPPG/DHDAB/DPPG ion triplet phase in which the overall negative charge is delocalised across the headgroups. Vesicles composed from the 7:3 mixture formed highly stable dispersions with an increased gel to liquid crystalline phase transition temperature with respect to its pure components. Increasing the proportion of DHDAB above 50 mol% led to demixing between the condensed ion paired phase and the more fluid surfactant, as was clearly observed in epifluorescence images taken of the surface films.

Molecular insights into the behaviour of bile salts at interfaces: a key to their role in lipid digestion.

HYPOTHESES: Understanding the mechanisms underlying lipolysis is crucial to address the ongoing obesity crisis and associated cardiometabolic disorders. Bile salts (BS), biosurfactants present in the small intestine, play key roles in lipid digestion and absorption. It is hypothesised that their contrasting functionalities - adsorption at oil/water interfaces and shuttling of lipolysis products away from these interfaces - are linked to their structural diversity. We investigate the interfacial films formed by two BS, sodium taurocholate (NaTC) and sodium taurodeoxycholate (NaTDC), differing by the presence or absence of a hydroxyl group on their steroid skeleton. EXPERIMENTS: Their adsorption behaviour at the air/water interface and interaction with a phospholipid monolayer - used to mimic a fat droplet interface - were assessed by surface pressure measurements and ellipsometry, while interfacial morphologies were characterised in the lateral and perpendicular directions by Brewster angle microscopy, X-ray and neutron reflectometry, and molecular dynamics simulations. FINDINGS: Our results provide a comprehensive molecular-level understanding of the mechanisms governing BS interfacial behaviour. NaTC shows a higher affinity for the air/water and lipid/water interfaces, and may therefore favour enzyme adsorption, whereas NaTDC exhibits a higher propensity for desorption from these interfaces, and may thus more effectively displace hydrolysis products from the interface, through dynamic exchange.

Diminishing biofilm resistance to antimicrobial nanomaterials through electrolyte screening of electrostatic interactions.

The extracellular polymer substances (EPS) generated by biofilms confers resistance to antimicrobial agents through electrostatic and steric interactions that hinder molecular diffusion. This resistance mechanism is particularly evident for antibacterial nanomaterials, which inherently diffuse more slowly compared to small organic antibacterial agents. The aim of this study was to determine if a biofilm's resistance to antibacterial nanomaterial diffusion could be diminished using electrolytes to screen the EPS's electrostatic interactions. Anionic (+) alpha-tocopherol phosphate (α-TP) liposomes were used as the antimicrobial nanomaterials in the study. They self-assembled into 700 nm sized structures with a zeta potential of -20 mV that were capable of killing oral bacteria (S. oralis growth inhibition time of 3.34 ± 0.52 h). In a phosphate (-ve) buffer the -ve α-TP liposomes did not penetrate multispecies oral biofilms, but in a Tris (hydroxymethyl)aminomethane (+ve) buffer they did (depth - 12.4 ± 3.6 µm). The Tris did not modify the surface charge of the α-TP nanomaterials, rather it facilitated the α-TP-biofilm interactions through electrolyte screening (Langmuir modelled surface pressure increase of 2.7 ± 1.8 mN/ m). This data indicated that EPS resistance was mediated through charge repulsion and that this effect could be diminished through the co-administration of cationic electrolytes.

The pH-dependence of lipid-mediated antimicrobial peptide resistance in a model staphylococcal plasma membrane: A two-for-one mechanism of epithelial defence circumvention.

The mechanisms of membrane defence by lysylphosphatidylglycerol (LPG), were investigated using synthetic biomimetic mono- and bilayer models of methicillin resistant S. aureus ST239 TW, based on its lipid composition in both pH 7.4 (28% LPG) and pH 5.5 (51% LPG) cultures. These models incorporated a stable synthetic analogue of LPG (3adLPG) to facilitate long-duration biophysical studies, which were previously limited by the lability native LPG. Both increased 3adLPG content and full headgroup ionization at pH 5.5, increased bilayer order and dampened overall charge, via the formation of neutral ion pairs with anionic lipids. Ion pair formation in air/liquid interface lipid monolayers elicited a significant condensing effect, which correlated with the inhibition of subphase-injected magainin 2 F5W partitioning. In fluid phase lipid vesicles, increasing the proportion of 3adLPG from 28 to 51 mol% completely inhibited the adoption of the membrane-active α­helical conformation of the peptide, without the need for full headgroup ionization. Neutron reflectivity measurements performed on biomimetic PG/3adLPG fluid floating bilayers, showed a significant ordering effect of mild acidity on a bilayer containing 30 mol% 3adLPG, whilst peptide binding/partitioning was only fully inhibited in a bilayer with 55 mol% 3adLPG at pH 5.5. These findings are discussed with respect to the roles of LPG in resistance to human epithelial defences in S. aureus and the continued evolution of this opportunistic pathogen's virulence.

Tolerance of MRSA ST239-TW to chlorhexidine-based decolonization: Evidence for keratinocyte invasion as a mechanism of biocide evasion.

OBJECTIVES: Information on genetic determinants of chlorhexidine tolerance (qacA carriage and MIC) in vitro is available, although evidence of the clinical impact and mechanisms remain poorly understood. We investigated why, following chlorhexidine intervention, prevalent epidemic MRSA ST22 and ST36 clones declined at an ICU, whilst an ST239-TW clone did not. The chlorhexidine tolerant ST239-TW phenotypes were assessed for their protein binding, cell adhesion and intracellular uptake potential. METHODS: Six ST22, ST36 and ST239-TW bloodstream infection isolates with comparable chlorhexidine MICs were selected from a 2-year outbreak in an ICU at Guy's and St. Thomas' Hospital. Isolates were tested for fibrinogen and fibronectin binding, and adhesion/internalization into human keratinocytes with and without biocide. RESULTS: Binding to fibrinogen and fibronectin, adhesion and intracellular uptake within keratinocytes (P < 0.001) and intracellular survival in keratinocytes under chlorhexidine pressure (ST22 3.18%, ST36 4.57% vs ST239-TW 12.79%; P < 0.0001) was consistently higher for ST239-TW. CONCLUSIONS: We present evidence that MRSA clones with similarly low in vitro tolerance to chlorhexidine exhibit different in vivo susceptibilities. The phenomenon of S. aureus adhesion and intracellular uptake into keratinocytes could therefore be regarded as an additional mechanism of chlorhexidine tolerance, enabling MRSA to evade infection control measures.

Design and development of a biorelevant simulated human lung fluid.

Biorelevant fluids are required to enable meaningful in vitro experimental determinations of the biopharmaceutical properties of inhaled medicines, e.g. drug solubility, particle dissolution, cellular uptake. Our aim was to develop a biorelevant simulated lung fluid (SLF) with a well-defined composition and evidence-based directions for use. The SLF contained dipalmitoylphosphotidylcholine, dipalmitoylphosphatidylglycerol, cholesterol, albumin, IgG, transferrin and antioxidants. Freshly made SLF had pH 7.2, viscosity 1.138 × 10-3 Pa s, conductivity 14.5 mS/m, surface tension 54.9 mN/m and density 0.999 g/cm3. Colour, surface tension and conductivity were the most sensitive indicators of product deterioration. The simulant was stable for 24 h and 48 h at 37 °C and 21 °C, respectively, (in-use stability) and for 14 days when stored in a refrigerator (storage stability). To extend stability, the SLF was vacuum freeze-dried in batches to produce lyophilised powder that can be reconstituted readily when needed at the point of use. In conclusion, we have reported the composition and manufacture of a biorelevant, synthetic SLF, provided a detailed physico-chemical characterisation and recommendations for how to store and use a product that can be used to generate experimental data to provide inputs to computational models that predict drug bioavailability in the lungs.

A combined FTIR and DSC study on the bilayer-stabilising effect of electrostatic interactions in ion paired lipids.

Investigating lipid ion pair formation is important for understanding the mechanisms of lipid-mediated drug resistance in bacteria. In this study we have used the charged amphiphiles dipalmitoylphosphatidylglycerol (DPPG) and dihexadecyldimethylammonium bromide (DHDAB), as a model to evaluate the formation of ion pairs by a combined Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) analysis. FTIR was employed to study the environment of the DPPC headgroup phosphate and lipid/surfactant alkane chains, in vesicles formed by the two amphiphiles mixed in various molar ratios. An increase of the absorbance ratio of 1221-1201 cm-1 in the asymmetric phosphate stretching mode was found to follow a sigmoidal relationship with the proportion of DHDAB, increasing to a plateau above a DPPG/DHDAB 1:1 molar ratio of, providing evidence that the PG headgroup phosphate is involved in ion pairing. A consistent red shift was measured for the position of the symmetric CH2 stretch band for the lipid/surfactant 1:1 molar ratio mixture, which is indicative of an increased ordering of the hydrophobic chains. The DSC experiments yielded information about the thermotropic and the mixing behaviour of the lipid/surfactant systems. DPPG and DHDAB seem to form an ion pair with cluster compound characteristics at the equimolar ratio. Most interestingly, the DPPG/DHDAB 2:1 molar ratio mixture is characterized by strong intermolecular interactions, which result in a pronounced stabilization of the gel phase, possibly through the formation of a closely-associated ion triplet configuration in which the charges are delocalised across the headgroups.

Influence of the Surfactant Structure on Photoluminescent π-Conjugated Polymer Nanoparticles: Interfacial Properties and Protein Binding.

π-Conjugated polymer nanoparticles (CPNs) are under investigation as photoluminescent agents for diagnostics and bioimaging. To determine whether the choice of surfactant can improve CPN properties and prevent protein adsorption, five nonionic polyethylene glycol alkyl ether surfactants were used to produce CPNs from three representative π-conjugated polymers. The surfactant structure did not influence size or yield, which was dependent on the nature of the conjugated polymer. Hydrophobic interaction chromatography, contact angle, quartz crystal microbalance, and neutron reflectivity studies were used to assess the affinity of the surfactant to the conjugated polymer surface and indicated that all surfactants were displaced by the addition of a model serum protein. In summary, CPN preparation methods which rely on surface coating of a conjugated polymer core with amphiphilic surfactants may produce systems with good yields and colloidal stability in vitro, but may be susceptible to significant surface alterations in physiological fluids.