Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 5 de 5
Filter
Add more filters










Database
Language
Publication year range
1.
Environ Sci Process Impacts ; 26(7): 1216-1226, 2024 Jul 17.
Article in English | MEDLINE | ID: mdl-38895946

ABSTRACT

Micro- and nanoplastic particles have been detected in most environmental compartments. The presence of microplastics in the remote marine atmosphere and close to large lakes suggests bubble mediated water-air transfer as a source of airborne microplastics, however, quantitative estimates of plastic emission from surface waters remain uncertain. In this work, we elucidate the emission of submicron polystyrene nanospheres by bubble bursting in a laboratory setting from low salinity waters (salinity 0-1.0 g kg-1), polystyrene particle diameter (103, 147 and 269 nm), aqueous particle number concentrations in the range 4 × 107-2 × 109 cm-3, and bubble formation rate (0.88-3.35 L min-1 of air). Production of polystyrene aerosols was demonstrated using a scanning mobility particle sizer and confirmed by analysis of filter samples using pyrolysis gas chromatography coupled to mass spectrometry. We show that production of polystyrene aerosol particles scales linearly with the number concentration of plastic particles in the water. Our results suggest that small amounts (0.01 g kg-1) of salt increase polystyrene particle production. To the best of our knowledge this is the first study of bubble mediated water-air transfer of plastic particles as small as 100 nm.


Subject(s)
Air Pollutants , Environmental Monitoring , Microplastics , Microplastics/analysis , Air Pollutants/analysis , Environmental Monitoring/methods , Aerosols/analysis , Polystyrenes/chemistry , Particle Size , Water Pollutants, Chemical/analysis
2.
J Chromatogr A ; 1717: 464622, 2024 Feb 22.
Article in English | MEDLINE | ID: mdl-38309189

ABSTRACT

Microplastic is ubiquitous in the environment. Recently it was discovered that microplastic (MP, 1 µm-5 mm) contamination is present in the atmosphere where it can be transported over long distances and introduced to remote pristine environments. Sources, concentration levels, and transportation pathways of MP are still associated with large uncertainties. The abundance of atmospheric MP increases with decreasing particle size, suggesting that nanoplastics (NP, <1µm) could be of considerable atmospheric relevance. Only few analytical methods are available for detection of nanosized plastic particles. Thermoanalytical techniques are independent of particle size and are thus a powerful tool for MP and NP analysis. Here we develop a method for analysis of polystyrene on the nanogram scale using pyrolysis gas chromatography coupled to mass spectrometry. Pyrolysis was performed using a slow temperature ramp, and analytes were cryofocused prior to injection. The mass spectrometer was operated in selected ion monitoring (SIM) mode. A lower limit of detection of 1±1 ng and a lower limit of quantification of 2±2 ng were obtained (for the trimer peak). The method was validated with urban matrices of low (7 µg per sample) and high (53 µg per sample) aerosol mass loadings. The method performs well for low loadings, whereas high loadings seem to cause a matrix effect reducing the signal of polystyrene. This effect can be minimized by introducing a thermal desorption step prior to pyrolysis. The study provides a novel analysis method for qualitative and semi-quantitative analysis of PS on the nanogram scale in an aerosol matrix. Application of the method can be used to obtain concentration levels of polystyrene in atmospheric MP and NP. This is important in order to improve the understanding of the sources and sinks of MP and NP in the environment and thereby identify routes of exposure and uptake of this emerging contaminant.


Subject(s)
Nanoparticles , Water Pollutants, Chemical , Polystyrenes/analysis , Plastics/chemistry , Microplastics , Gas Chromatography-Mass Spectrometry , Pyrolysis , Water Pollutants, Chemical/analysis , Environmental Monitoring/methods , Nanoparticles/chemistry , Aerosols/analysis
3.
Phys Chem Chem Phys ; 25(47): 32430-32442, 2023 Dec 06.
Article in English | MEDLINE | ID: mdl-37991397

ABSTRACT

The role of airborne nanoparticles in atmospheric chemistry and public health is largely controlled by particle size, morphology, surface composition, and coating. Aerosol mass spectrometry provides real-time chemical characterization of submicron atmospheric particles, but analysis of nanoplastics in complex aerosol mixtures such as sea spray is severely limited by challenges associated with separation and ionization of the aerosol matrix. Here we characterize the internal and external mixing state of synthetic sea spray aerosols spiked with 150 nm nanoplastics. Aerosols generated from pneumatic atomization and from a sea spray tank are compared. A humidified tandem differential mobility analyzer is used as a size and hygroscopicity filter, resulting in separation of nanoplastics from sea spray, and an inline high-resolution time-of-flight aerosol mass spectrometer is used to characterize particle composition and ionization efficiency. The separation technique amplified the detection limit of the airborne nanoplastics. A salt coating was found on the nanoplastics with coating thickness increasing exponentially with increasing bulk solution salinity, which was varied from 0 to 40 g kg-1. Relative ionization efficiencies of polystyrene and sea salt chloride were 0.19 and 0.36, respectively. The growth-factor derived hygroscopicity of sea salt was 1.4 at 75% relative humidity. These results underscore the importance of separating airborne nanoplastics from sea salt aerosol for detailed online characterization by aerosol mass spectrometry and characterization of salt coatings as a function of water composition. The surface coating of nanoplastic aerosols by salts can profoundly impact their surface chemistry, water uptake, and humidified particle size distributions in the atmosphere.

4.
J Phys Chem A ; 123(47): 10315-10322, 2019 Nov 27.
Article in English | MEDLINE | ID: mdl-31665882

ABSTRACT

Fourier transform infrared smog chamber techniques were used to study the kinetics and mechanisms of the reactions of Cl atoms and OH radicals with pentafluorophenol (C6F5OH) in 700 Torr total pressure of air or N2 diluent at 296 ± 2 K. Rate constants k(OH + C6F5OH) = (6.88 ± 1.37) × 10-12 cm3 molecule-1 s-1 and k(Cl + C6F5OH) = (2.52 ± 0.31) × 10-11 cm3 s-1 molecule-1 in 700 Torr air diluent were determined. In 700 Torr N2, the rate constant for the reaction of C6F5OH with Cl atoms is linearly dependent on the Cl atom concentration. Product studies on this reaction in both 700 Torr air and 700 Torr N2 diluent show the formation of nonconjugated products. The photolysis constant of C6F5OH was determined by 254 nm UV irradiation of a C6F5OH and CH3CHO mixture in 700 Torr air or N2 at 296 ± 2 K and yielded a photolysis rate constant of J(C6F5OH) = (2.83 ± 0.25) × 10-3 s-1. Results are discussed with respect to the atmospheric chemistry of other halogenated aromatic species.

5.
Phys Chem Chem Phys ; 20(45): 28796-28809, 2018 Nov 21.
Article in English | MEDLINE | ID: mdl-30418435

ABSTRACT

Photochemical reactors were used to study the kinetics and mechanisms of reactions of Cl atoms and OH radicals with hexa- and penta-fluorobenzene (C6F6, C6F5H) in 700 Torr total pressure of N2, air, or O2 diluent at 296 ± 2 K. C6F6 and C6F5H undergo ring-opening following 254 nm UV irradiation, but with small quantum yields (φ < 0.03). Reaction of Cl atoms with C6F6 proceeds via adduct formation, while the reaction of Cl atoms with C6F5H proceeds via hydrogen abstraction and adduct formation. C6F6-Cl and C6F5H-Cl adducts decompose rapidly (k ∼ 105-106 s-1) reforming the reactants, and react with Cl atoms to form products. The fraction of adduct reacting with Cl atoms increases with steady state Cl atom concentration, resulting in an increasing apparent effective Cl atom rate constant. The rate constant for the H-abstraction channel for Cl + C6F5H is estimated at (7.3 ± 5.7) × 10-16 cm3 molecule-1 s-1. Establishment of the equilibrium between the adducts and the aromatic reactant + Cl occurs rapidly with equilibrium constants of K([adduct]/[aromatic][Cl]) = (1.96 ± 0.11) × 10-16 and (9.28 ± 0.11) × 10-17 cm3 molecule-1 for C6F6 and C6F5H, respectively. Reaction of the adducts with O2 occurs slowly with estimated rate constants of <7 and <4 × 10-18 cm3 molecule-1 s-1 for C6F6-Cl and C6F5H-Cl, respectively. The rate constants for reaction of OH radicals with C6F6 and C6F5H were determined to be (2.27 ± 0.49) × 10-13 and (2.56 ± 0.62) × 10-13 cm3 molecule-1 s-1, respectively. UV and IR spectra of C6F6 and C6F5H at 296 ± 1 K were collected and calibrated. Results are discussed in the context of available literature data for reactions of Cl atoms and OH radicals with halogenated aromatic compounds.

SELECTION OF CITATIONS
SEARCH DETAIL
...