Conducting chitosan/hydroxylethyl cellulose/polyaniline bionanocomposites hydrogel based on graphene oxide doped with Ag-NPs.

The current work focuses on a cheap and simple preparation of highly conducting chitosan/hydroxyl ethylcellulose/polyaniline loaded with graphene oxide doped by silver nanoparticles (CS/HEC/PAni/GO@Ag) bionanocomposite as a biodegradable and biocompatible hydrogel for energy storage technology. Scanning electron microscopy (SEM) displays the compatibility of chitosan, hydroxyl ethyl cellulose, and polyaniline and a good distribution of GO@Ag-NPs in bionanocomposite hydrogels. X-ray diffraction (XRD) displayed the structure and existence of GO@Ag-NPs in the matrix. The swelling percentage and the antibacterial activities slightly increased with raising the content of GO@Ag-NPs. Also, the presence of both chitosan and cellulose improves the biodegradation of the fabricated bionanocomposites, which is increased by adding GO. Moreover, the incorporation of 5% GO@Ag-NPs in hydrogels enhances dc-conductivity by about 25 times from 3.37 × 10-3 to 8.53 × 10-2 S/cm. The fabricated hydrogels are inexpensive, eco-friendly, and have high capacitance and permittivity, and so they can store electrical energy.

A novel electromagnetic biodegradable nanocomposite based on cellulose, polyaniline, and cobalt ferrite nanoparticles.

Biodegradable, antimicrobial, and semiconducting cellulosic composite was synthesized by in-situ polymerization of polyaniline in the presence of cellulose. The cobalt ferrite nanoparticles (CFO-NPs) were added during the polymerization process to acquire this composite magnetic property. The CFO-NPs were prepared by sol-gel method with average particles size less than 50 nm. The nanocomposites were characterized by Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX). In addition, their magnetic, dielectric constant, dielectric loss, and conductivity behaviors were studied. The magnetization (Ms) and conductivity increased up to 3.7 emu/g and 3.5 × 10-3 S/cm, respectively, with increasing CFO-NPs content. The prepared electromagnetic nanocomposite exhibits highly efficient biodegradability and antimicrobial activity against Escherichia coli, Bacillus subtilis, and Candida albicans. The antimicrobial activity increased with increasing CFO-NPs while the biodegradability decreased.

Green, economic, and partially biodegradable wood plastic composites via enzymatic surface modification of lignocellulosic fibers.

Lignocellulosic fibers, which obtained from Citrus trees trimmings, were modified with Aspergillus flavus (EGYPTA5) enzymes. The non-modified and the modified lignocellulosic fibers were used with low density polyethylene (LDPE) by melt blending brabender method at 170 °C with different ratio (5, 10 and 20 wt%) to obtain wood plastic composites (WPC). The prepared samples were characterized using Fourier-transformed infrared (FT-IR), Scan Electron Microscope (SEM), and Water vapor transmission rate (WVTR) as well as, the mechanical, thermal, biodegradability and swelling properties were examined. The fabricated WPC displayed good mechanical and thermal properties compare with pure LDPE. Also, the WVTR was enhanced by the addition of modified lignocellulosic fibers over the unmodified one. Moreover, the enzymes assay such as cellulase and lignin peroxidase enzymes were estimated and confirming the growing of fungi on the lignocellulosic fiber in solid state fermentation condition to improve lignin peroxidase production and eliminate cellulose enzymes. The fabricated WPC can be used in different environmental application such as packaging system, that it will be green, economic, and partially biodegradable.