Facile synthesis of Mn-doped NiCo2O4 nanoparticles with enhanced electrochemical performance for a battery-type supercapacitor electrode.

We report the synthesis of manganese-doped nickel cobalt oxide (Mn-doped NiCo2O4) nanoparticles (NPs) by an efficient hydrothermal and subsequent calcination route. The material exhibits a homogeneous distribution of the Mn dopant and a battery-type behavior when tested as a supercapacitor electrode material. Mn-doped NiCo2O4 NPs show an excellent specific capacity of 417 C g-1 at a scan rate of 10 mV s-1 and 204.3 C g-1 at a current density of 1 A g-1 in a standard three-electrode configuration, ca. 152-466% higher than that of pristine NiCo2O4 or MnCo2O4. In addition, Mn-doped NiCo2O4 NPs showed an excellent capacitance retention of 99% after 1000 charge-discharge cycles at a current density of 2 A g-1. The symmetric solid-state supercapacitor device assembled using this material delivered an energy density of 0.87 µW h cm-2 at a power density of 25 µW h cm-2 and 0.39 µW h cm-2 at a high power density of 500 µW h cm-2. The cost-effective synthesis and high electrochemical performance suggest that Mn-doped NiCo2O4 is a promising material for supercapacitors.

Catalytic activation of peroxymonosulfate with manganese cobaltite nanoparticles for the degradation of organic dyes.

In this work, we report the facile hydrothermal synthesis of manganese cobaltite nanoparticles (MnCo2O4.5 NPs) which can efficiently activate peroxymonosulfate (PMS) for the generation of sulfate free radicals (SO4˙-) and degradation of organic dyes. The synthesized MnCo2O4.5 NPs have a polyhedral morphology with cubic spinel structure, homogeneously distributed Mn, Co, and O elements, and an average size less than 50 nm. As demonstrated, MnCo2O4.5 NPs showed the highest catalytic activity among all tested catalysts (MnO2, CoO) and outperformed other spinel-based catalysts for Methylene Blue (MB) degradation. The MB degradation efficiency reached 100% after 25 min of reaction under initial conditions of 500 mg L-1 Oxone, 20 mg L-1 MnCo2O4.5, 20 mg L-1 MB, unadjusted pH, and T = 25 °C. MnCo2O4.5 NPs showed a great catalytic activity in a wide pH range (3.5-11), catalyst dose (10-60 mg L-1), Oxone concentration (300-1500 mg L-1), MB concentration (5-40 mg L-1), and temperature (25-55 °C). HCO3 -, CO3 2- and particularly Cl- coexisting anions were found to inhibit the catalytic activity of MnCo2O4.5 NPs. Radical quenching experiments revealed that sulfate radicals are primarily responsible for MB degradation. A reaction sequence for the catalytic activation of PMS was proposed. The as-prepared MnCo2O4.5 NPs could be reused for at least three consecutive cycles with small deterioration in their performance due to low metal leaching. This study suggests a facile route for synthesizing MnCo2O4.5 NPs with high catalytic activity for PMS activation and efficient degradation of organic dyes.