Multi-element analysis of tyre rubber for metal tracers.

The purpose of this study was to identify a characteristic elemental tyre fingerprint that can be utilised in atmospheric source apportionment calculations. Currently zinc is widely used as a single element tracer to quantify tyre wear, however several authors have highlighted issues with this approach. To overcome this, tyre rubber tread was digested and has been analysed for 25 elements by ICP-MS to generate a multielement profile. Additionally, to estimate the percentage of the tyre made up of inert fillers, thermogravimetric analysis was performed on a subset. Comparisons were made between passenger car and heavy goods vehicle tyre composition, and a subset of tyres had both tread and sidewall sampled for further comparison. 19 of the 25 elements were detected in the analysis. The mean mass fraction of zinc detected was 11.17 g/kg, consistent with previous estimates of 1% of the tyre mass. Aluminium, iron, and magnesium were found to be the next most abundant elements. Only one source profile for tyre wear exists in both the US and EU air pollution species profile databases, highlighting the need for more recent data with better coverage of tyre makes and models. This study provides data on new tyres which are currently operating on-road in Europe and is therefore relevant for ongoing atmospheric studies assessing the levels of tyre wear particles in urban areas.

Utah Wintertime Measurements of Heavy-Duty Vehicle Nitrogen Oxide Emission Factors.

There have only been a few wintertime studies of heavy-duty vehicle (HDV) NOx emissions in the United States, and while they have observed increased emissions, fleet characterization to identify the cause has been lacking. We have collected wintertime measurements of NOx emission factors from 1591 HDVs at a Utah Port of Entry in December 2020 that includes individual vehicle identification. In general, NOx emission factors for 2011 and newer chassis model year HDV are significantly higher than those for 2017 spring measurements from California. The newest chassis model year HDV (2017-2021) NOx emission factors are similar, indicating no significant emission deterioration over the 5 year period, though they are still approximately a factor of 3 higher than the portable emission measurement on-road enforcement standard. We estimate that ambient temperature increases NOx emissions no more than 25% in the newer HDV, likely through reductions in catalyst efficiencies. NOx emissions increase to a significantly higher level for the 2011-2013 chassis model year vehicles, where within the uncertainties, they have emissions similar to older precontrol vehicles, indicating that they have lost their NOx control capabilities within 8 years. MOVES3 modeling of the Utah fleet underpredicted mean NOx emissions by a factor of 1.8 but the MOVES3 estimate is helped by including a larger fraction of high-emitting glider kit trucks (new chassis with pre-emission control engines) than found in the observations.

Evaluation of Heavy- and Medium-Duty On-Road Vehicle Emissions in California's South Coast Air Basin.

Emission measurements were collected from heavy-duty (HDVs) and medium-duty vehicles (MDVs) at the Peralta weigh station long-term measurement site near Anaheim, CA, in 2017. Two Fuel Efficiency Automobile Test units sampled elevated and ground-level exhaust vehicles totaling 2 315 measurements. HDVs (1844 measurements) exhibited historical reductions in fuel specific oxides of nitrogen (NOx) from the 2008 measurements (55%) with increased use of exhaust gas recirculation and selective catalytic reduction systems. However, as these technologies have aged, the in-use benefits have declined. Infrared % opacity measurements of tailpipe soot decreased 14% since 2012 with increased diesel particulate filter (DPF) use, DPF longevity, and fleet turnover. Sixty-three percent of the HDV fleet in 2017 was chassis model year 2011+ compared to only 12% in 2012. The observed MDV fleet (471 measurements) was 1.4 years older than the HDV fleet with average NOx 14% higher. A significant reduction in MDV NOx occurred ∼2 model years prior to similar HDV reductions (2014 versus 2016 chassis model year). MDV chassis model years 2014+ were able to meet their corresponding NOx laboratory certification standards in-use, whereas HDVs remain slightly above this threshold. Similar MDV NOx emission trends were also observed in data previously collected in Chicago, IL.

The Story of Ever Diminishing Vehicle Tailpipe Emissions as Observed in the Chicago, Illinois Area.

The University of Denver has collected on-road fuel specific vehicle emissions measurements in the Chicago area since 1989. This nearly 30 year record illustrates the large reductions in light-duty vehicle tailpipe emissions and the remarkable improvements in emissions control durability to maintain low emissions over increasing periods of time. Since 1989 fuel specific carbon monoxide (CO) emissions have been reduced by an order of magnitude and hydrocarbon (HC) emissions by more than a factor of 20. Nitric oxide (NO) emissions have only been collected since 1997 but have seen reductions of 79%. This has increased the skewness of the emissions distribution where the 2016 fleet's 99th percentile contributes ∼3 times more of the 1990 total for CO and HC emissions. There are signs that these reductions may be leveling out as the emissions durability of Tier 2 vehicles in use today has almost eliminated the emissions reduction benefit of fleet turnover. Since 1997, the average age of the Chicago on-road fleet has increased 2 model years and the percentage of passenger vehicles has dropped from 71 to 52% of the fleet. Emissions are now so well controlled that the influence of driving mode has been completely eliminated as a factor for fuel specific CO and NO emissions.

Long-Term Fuel-Specific NO x and Particle Emission Trends for In-Use Heavy-Duty Vehicles in California.

Two California heavy-duty fleets have been measured in 2013, 2015, and 2017 using the On-Road Heavy-Duty Measurement System. The Port of Los Angeles drayage fleet has increased in age by 3.3 model years (4.2-7.5 years old) since 2013, with little fleet turnover. Large increases in fuel-specific particle emissions (PM) observed in 2015 were reversed in 2017, returning to near 2013 levels, suggesting repairs and or removal of high emitting vehicles. Fuel-specific oxides of nitrogen (NO x) emissions of this fleet have increased, and NO x after-treatment systems do not appear to perform ideally in this setting. At the Cottonwood weigh station in northern California, the fleet age has declined (7.8 to 6 years old) since 2013 due to fleet turnover, significantly lowering the average fuel-specific emissions for PM (-87%), black carbon (-76%), and particle number (-64%). Installations of retrofit-diesel particulate filters in model year 2007 and older vehicles have further decreased particle emissions. Cottonwood fleet fuel-specific NO x emissions have decreased slightly (-8%) during this period; however, newer technology vehicles with selective catalytic reduction systems (SCR) promise an additional factor of 4-5 further reductions in the long-haul fleet emissions as California transitions to an all SCR-equipped fleet.

Repeat Fuel Specific Emission Measurements on Two California Heavy-Duty Truck Fleets.

The University of Denver repeated its 2013 fuel specific gaseous and particle emission measurements on two California heavy-duty vehicle fleets. In 2015 1456 measurements at the Port of Los Angeles and 694 measurements at the Cottonwood weigh station in northern California were collected. The Port fleet changed little since 2013, increasing the average age (+1.8 years), accompanied by an increase in particle mass (PM) by +266% (0.03 ± 0.01 to 0.11 ± 0.01 gPM/kg of fuel) and black carbon (BC) by +300% (0.02 ± 0.003 to 0.08 ± 0.01 gBC/kg of fuel). Particle number (PN) also increased (1.5 × 1014 ± 2.5 × 1013 to 2.8 × 1014 ± 2.8 × 1013 PN/kg of fuel) by a smaller percentage (+87%). Chassis model year 2008 and 2009 vehicles currently dominate the fleet, accounting for the majority of these increases. The long-haul Cottonwood fleet decreased in fleet age (-0.6 model years), where half the decreases in fuel specific PM (-66%), BC (-65%), and PN (-19%) emissions are due to the newer fleet; an increased fraction of pre-2008 chassis model year vehicles with retrofit diesel particulate filters (DPFs) account for the remaining reductions. These opposing emissions trends emphasize the importance of fully functional DPFs.