Primary cilia expression in bone marrow in response to mechanical stimulation in explant bioreactor culture.

Bone marrow contains a multitude of mechanically sensitive cells that may participate in mechanotransduction. Primary cilia are sensory organelles expressed on mesenchymal stem cells (MSCs), osteoblasts, osteocytes, and other cell types that sense fluid flow in monolayer culture. In marrow, cilia could similarly facilitate the sensation of relative motion between adjacent cells or interstitial fluid. The goal of this study was to determine the response of cilia to mechanical stimulation of the marrow. Bioreactors were used to supply trabecular bone explants with low magnitude mechanical stimulation (LMMS) of 0.3 ×g at 30 Hz for 1 h/d, 5 d/week, inducing shear stresses in the marrow. Four groups were studied: unstimulated (UNSTIM), stimulated (LMMS), and with and without chloral hydrate (UNSTIM+CH and LMMS+CH, respectively), which was used to disrupt cilia. After 19 days of culture, immunohistochemistry for acetylated α-tubulin revealed that more cells expressed cilia in culture compared to in vivo controls. Stimulation decreased the number of cells expressing cilia in untreated explants, but not in CH-treated explants. MSCs represented a greater fraction of marrow cells in the untreated explants than CH-treated explants. MSCs harvested from the stimulated groups were more proliferative than in the unstimulated explants, but this effect was absent from CH treated explants. In contrast to the marrow, neither LMMS nor CH treatment affected bone formation as measured by mineralising surface. Computational models indicated that LMMS does not induce bone strain, and the reported effects were thus attributed to shear stress in the marrow. From a clinical perspective, genetic or pharmaceutical alterations of cilia expression may affect marrow health and function.

Osteocyte differentiation and the formation of an interconnected cellular network in vitro.

Extracellular matrix (ECM) stiffness and cell density can regulate osteoblast differentiation in two dimensional environments. However, it is not yet known how osteoblast-osteocyte differentiation is regulated within a 3D ECM environment, akin to that existing in vivo. In this study we test the hypothesis that osteocyte differentiation is regulated by a 3D cell environment, ECM stiffness and cell density. We encapsulated MC3T3-E1 pre-osteoblastic cells at varied cell densities (0.25, 1 and 2 × 106 cells/mL) within microbial transglutaminase (mtgase) gelatin hydrogels of low (0.58 kPa) and high (1.47 kPa) matrix stiffnesses. Cellular morphology was characterised from phalloidin-FITC and 4',6-diamidino-2-phenylindole (DAPI) dilactate staining. In particular, the expression of cell dendrites, which are phenotypic of osteocyte differentiation, were identified. Immunofluorescent staining for the osteocytes specific protein DMP-1 was conducted. Biochemical analyses were performed to determine cell number, alkaline phosphatase activity and mineralisation at 2.5 hours, 3, 21 and 56 days. We found that osteocyte differentiation and the formation of an interconnected network between dendritic cells was significantly increased within low stiffness 3D matrices, compared to cells within high stiffness matrices, at high cell densities. Moreover we saw that this network was interconnected, expressed DMP-1 and also connected with osteoblast-like cells at the matrix surface. This study shows for the first time the role of the 3D physical nature of the ECM and cell density for regulating osteocyte differentiation and the formation of the osteocyte network in vitro. Future studies could apply this method to develop 3D tissue engineered constructs with an osteocyte network in place.

Investigation of the optimal timing for chondrogenic priming of MSCs to enhance osteogenic differentiation in vitro as a bone tissue engineering strategy.

Recent in vitro tissue engineering approaches have shown that chondrogenic priming of human bone marrow mesenchymal stem cells (MSCs) can have a positive effect on osteogenesis in vivo. However, whether chondrogenic priming is an effective in vitro bone regeneration strategy is not yet known. In particular, the appropriate timing for chondrogenic priming in vitro is unknown albeit that in vivo cartilage formation persists for a specific period before bone formation. The objective of this study is to determine the optimum time for chondrogenic priming of MSCs to enhance osteogenic differentiation by MSCs in vitro. Pellets derived from murine and human MSCs were cultured in six different media groups: two control groups (chondrogenic and osteogenic) and four chondrogenic priming groups (10, 14, 21 and 28 days priming). Biochemical analyses (Hoechst, sulfate glycosaminoglycan (sGAG), Alkaline Phosphate (ALP), calcium), histology (Alcian Blue, Alizarin Red) and immunohistochemistry (collagen types I, II and X) were performed on the samples at specific times. Our results show that after 49 days the highest amount of sGAG production occurred in MSCs chondrogenically primed for 21 days and 28 days. Moreover we found that chondrogenic priming of MSCs in vitro for specific amounts of time (14 days, 21 days) can have optimum influence on their mineralization capacity and can produce a construct that is mineralized throughout the core. Determining the optimum time for chondrogenic priming to enhance osteogenic differentiation in vitro provides information that might lead to a novel regenerative treatment for large bone defects, as well as addressing the major limitation of core degradation and construct failure.

Estrogen withdrawal from osteoblasts and osteocytes causes increased mineralization and apoptosis.

Recent studies have demonstrated increased bone mineral heterogeneity following estrogen withdrawal in vivo. Such changes likely contribute to fracture risk during post-menopausal osteoporosis since tissue mineralization is correlated with bone strength and stiffness. However, the cellular mechanisms responsible for increased mineral variability have not yet been distinguished. The objective of this study is to elucidate how alterations in mineral distribution are initiated during estrogen depletion. Specifically, we tested two separate hypotheses; (1) estrogen deficiency directly alters osteoblast mineralization and (2) estrogen deficiency increases bone cell apoptosis. Osteoblast-like cells (MC3T3-E1) and osteocyte-like cells (MLO-Y4) were pretreated with or without estrogen (17ß-estradiol) for 14 days. Estrogen deficiency was subsequently induced by either withdrawing estrogen from cells or blocking estrogen receptors using an estrogen antagonist, fulvestrant (ICI 182,780). Cell number (Hoechst DNA), alkaline phosphatase activity (p-NPP), mineralization (alizarin red) and apoptosis (Caspase 3/7) were evaluated. Whether estrogen withdrawal altered apoptosis rates in the presence of an apoptosis promoting agent (etoposide) was also determined. Interestingly, estrogen withdrawal from cells accustomed to estrogen exposure caused significantly increased osteoblast mineralization and osteocyte apoptosis compared with continued estrogen treatment. In contrast, blocking estrogen receptors with fulvestrant abrogated the mineralization induced by estrogen treatment. When apoptosis was induced using etoposide, cells undergoing estrogen withdrawal increased apoptosis compared to cells with continued estrogen treatment. Recognizing the underlying mechanisms regulating bone cell mineralization and apoptosis during estrogen deficiency and their consequences is necessary to further our knowledge of osteoporosis.

Osteocyte differentiation is regulated by extracellular matrix stiffness and intercellular separation.

Osteocytes are terminally differentiated bone cells, derived from osteoblasts, which are vital for the regulation of bone formation and resorption. ECM stiffness and cell seeding density have been shown to regulate osteoblast differentiation, but the precise cues that initiate osteoblast-osteocyte differentiation are not yet understood. In this study, we cultured MC3T3-E1 cells on (A) substrates of different chemical compositions and stiffnesses, as well as, (B) substrates of identical chemical composition but different stiffnesses. The effect of cell separation was investigated by seeding cells at different densities on each substrate. Cells were evaluated for morphology, alkaline phosphatase (ALP), matrix mineralisation, osteoblast specific genes (Type 1 collagen, Osteoblast specific factor (OSF-2)), and osteocyte specific proteins (dentin matrix protein 1 (DMP-1), sclerostin (Sost)). We found that osteocyte differentiation (confirmed by dendritic morphology, mineralisation, reduced ALP, Col type 1 and OSF-2 and increased DMP-1 and Sost expression) was significantly increased on soft collagen based substrates, at low seeding densities compared to cells on stiffer substrates or those plated at high seeding density. We propose that the physical nature of the ECM and the necessity for cells to establish a communication network contribute substantially to a concerted shift toward an osteocyte-like phenotype by osteoblasts in vitro.

A fluid-structure interaction model to characterize bone cell stimulation in parallel-plate flow chamber systems.

Bone continuously adapts its internal structure to accommodate the functional demands of its mechanical environment and strain-induced flow of interstitial fluid is believed to be the primary mediator of mechanical stimuli to bone cells in vivo. In vitro investigations have shown that bone cells produce important biochemical signals in response to fluid flow applied using parallel-plate flow chamber (PPFC) systems. However, the exact mechanical stimulus experienced by the cells within these systems remains unclear. To fully understand this behaviour represents a most challenging multi-physics problem involving the interaction between deformable cellular structures and adjacent fluid flows. In this study, we use a fluid-structure interaction computational approach to investigate the nature of the mechanical stimulus being applied to a single osteoblast cell under fluid flow within a PPFC system. The analysis decouples the contribution of pressure and shear stress on cellular deformation and for the first time highlights that cell strain under flow is dominated by the pressure in the PPFC system rather than the applied shear stress. Furthermore, it was found that strains imparted on the cell membrane were relatively low whereas significant strain amplification occurred at the cell-substrate interface. These results suggest that strain transfer through focal attachments at the base of the cell are the primary mediators of mechanical signals to the cell under flow in a PPFC system. Such information is vital in order to correctly interpret biological responses of bone cells under in vitro stimulation and elucidate the mechanisms associated with mechanotransduction in vivo.

Heat-shock-induced cellular responses to temperature elevations occurring during orthopaedic cutting.

Severe heat-shock to bone cells caused during orthopaedic procedures can result in thermal damage, leading to cell death and initiating bone resorption. By contrast, mild heat-shock has been proposed to induce bone regeneration. In this study, bone cells are exposed to heat-shock for short durations occurring during surgical cutting. Cellular viability, necrosis and apoptosis are investigated immediately after heat-shock and following recovery of 12, 24 h and 4 days, in osteocyte-like MLO-Y4 and osteoblast-like MC3T3-E1 cells, using flow cytometry. The regeneration capacity of heat-shocked Balb/c mesenchymal stem cells (MSCs) and MC3T3-E1s has been investigated following 7 and 14 day's recovery, by quantifying proliferation, differentiation and mineralization. An immediate necrotic response to heat-shock was shown in cells exposed to elevated temperatures (45°C, 47°C and most severe at 60°C). A longer-term apoptotic response is induced in MLO-Y4s and, to a lesser extent, in MC3T3-E1s. Heat-shock-induced differentiation and mineralization by MSCs. These findings indicate that heat-shock is more likely to induce apoptosis in osteocytes than osteoblasts, which might reflect their role as sensors detecting and communicating damage within bone. Furthermore, it is shown for the first time that mild heat-shock (less than equal to 47°C) for durations occurring during surgical cutting can positively enhance osseointegration by osteoprogenitors.

Local and regional mechanical characterisation of a collagen-glycosaminoglycan scaffold using high-resolution finite element analysis.

Artificial tissue growth requires cells to proliferate and differentiate within the host scaffold. As cell function is governed by mechano-sensitive selection, tissue type is influenced by the microscopic forces exposed to the cells, which is a product of macroscopically straining the scaffold. Accordingly, the microscopic strain environment within a CG scaffold is offered here. Using muCT to characterise CG scaffold architecture, two high-resolution 3D FE models were used to predict the deformation mechanics. While also providing an analysis of region-specific features, such as relative density, pore diameters and microstructural elastic stability, the deformation patterns afforded strains to be inferred for seeded cells. The results indicate a regional dependence, in terms of architectural and mechanical properties. Specifically, the peripheral regions demonstrated the lowest volume fraction, the highest stress concentrations and the greatest potential for elastic instability. Conversely, the mid-region exhibited the most homogeneous environment. Based on the proviso of mechano-sensitive proliferation and differentiation, the findings suggest cell function will vary between CG scaffold regions. Further work should investigate the possibility of improving the fabrication process in order to deliver a construct in line with the mid-region, or alternatively, isolation of the mid-region may prove beneficial for cell culturing.