ABSTRACT
The mirror suspensions in gravitational wave detectors demand low mechanical loss jointing to ensure good enough detector performance and to enable the detection of gravitational waves. Hydroxide catalysis bonds have been used in the fused silica suspensions of the GEO600, Advanced LIGO, and Advanced Virgo detectors. Future detectors may use cryogenic cooling of the mirror suspensions and this leads to a potential change of mirror material and suspension design. Other bonding techniques that could replace or be used alongside hydroxide catalysis bonding are of interest. A design that incorporates repair scenarios is highly desirable. Indeed, the mirror suspensions in KAGRA, which is made from sapphire and operated at cryogenic temperatures, have used a combination of hydroxide catalysis bonding and gallium bonding. This Letter presents the first measurements of the mechanical loss of a gallium bond measured between 10 K and 295 K. It is shown that the loss, which decreases with temperature down to the level of (1.8±0.3)×10^{-4} at 10 K, is comparable to that of a hydroxide catalysis bond.
ABSTRACT
Planned cryogenic gravitational-wave detectors will require improved coatings with a strain thermal noise reduced by a factor of 25 compared to Advanced LIGO. We present investigations of HfO_{2} doped with SiO_{2} as a new coating material for future detectors. Our measurements show an extinction coefficient of k=6×10^{-6} and a mechanical loss of Ï=3.8×10^{-4} at 10 K, which is a factor of 2 below that of SiO_{2}, the currently used low refractive-index coating material. These properties make HfO_{2} doped with SiO_{2} ideally suited as a low-index partner material for use with a-Si in the lower part of a multimaterial coating. Based on these results, we present a multimaterial coating design which, for the first time, can simultaneously meet the strict requirements on optical absorption and thermal noise of the cryogenic Einstein Telescope.
