Reduction-responsive molecularly imprinted nanogels for drug delivery applications.

Degradable molecularly imprinted polymers (MIPs) with affinity for S-propranolol were prepared by the copolymerization of methacrylic acid as functional monomer and a disulfide-containing cross-linker, bis(2-methacryloyloxyethyl)disulfide (DSDMA), using bulk polymerization or high dilution polymerization for nanogels synthesis. The specificity and the selectivity of DSDMA-based molecularly imprinted polymers toward S-propranolol were studied in batch binding experiments, and their binding properties were compared to a traditional ethylene glycol dimethacrylate (EDMA)-based MIP. Nanosized MIPs prepared with DSDMA as crosslinker could be degraded into lower molecular weight linear polymers by cleaving the disulfide bonds and thus reversing cross-linking using different reducing agents (NaBH4, DTT, GSH). Turbidity, viscosity, polymer size and IR-spectra were measured to study the polymer degradation. The loss of specific recognition and binding capacity of S-propranolol was also observed after MIP degradation. This phenomenon was applied to modulate the release properties of the MIP. In presence of GSH at its intracellular concentration, the S-propranolol release was higher, showing that these materials could potentially be applied as intracellular controlled drug delivery system.

A simple approach to prepare molecularly imprinted polymers from nylon-6.

A convenient and simple approach for the preparation of molecularly imprinted polymers (MIPs) based on polyamide (nylon-6) was developed. The polymer matrix formation occurred during the transition of nylon from dissolved to solid state in the presence of template molecules in the initial solution. 2,2,2-Trifluoroethanol (TFE) was chosen as a main solvent for the polyamide. It provides a high solubility of nylon and does not significantly change the structure of biopolymers. The alteration of the polymer matrix structure after the addition of different types of porogens in the nylon/TFE solution was investigated. The structured polymers in the form of films and microparticles were prepared in the chosen optimal conditions. Different model biomolecular templates (of low- and high-molecular weight) were used for the preparation of MIPs, which were shown to specifically recognize these molecules upon binding experiments. The binding of the template molecules to MIPs was monitored using spectrophotometric, radioisotopic, or fluorometric detection. The selectivity coefficients of the MIPs were estimated to be 1.4-4.6 depending on the type of templates and conditions of the polymer matrix formation.

Ultrafast dynamics of charge density waves in 4H(b)-TaSe2 probed by femtosecond electron diffraction.

The dynamics of the photoinduced commensurate-to-incommensurate charge density wave (CDW) phase transition in 4H(b)-TaSe(2) are investigated by femtosecond electron diffraction. In the perturbative regime, the CDW re-forms on a 150-ps time scale, which is two orders of magnitude slower than in other transition-metal dichalcogenides. We attribute this to a weak coupling between the CDW carrying T layers and thus demonstrate the importance of three-dimensionality for the existence of CDWs. With increasing optical excitation, the phase transition is achieved, showing a second-order character, in contrast to the first-order behavior in thermal equilibrium.

A compact streak camera for 150 fs time resolved measurement of bright pulses in ultrafast electron diffraction.

We have developed a compact streak camera suitable for measuring the duration of highly charged subrelativistic femtosecond electron bunches with an energy bandwidth in the order of 0.1%, as frequently used in ultrafast electron diffraction (UED) experiments for the investigation of ultrafast structural dynamics. The device operates in accumulation mode with 50 fs shot-to-shot timing jitter, and at a 30 keV electron energy, the full width at half maximum temporal resolution is 150 fs. Measured durations of pulses from our UED gun agree well with the predictions from the detailed charged particle trajectory simulations.

[Reasons for referral to a gerontopsychiatric department]. / Gründe für die Einweisung in eine gerontopsychiatrische Klinik.

BACKGROUND: The need of specific gerontopsychiatric wards has not been estimated thus far, although psychiatric disorders are very common among the elderly. AIM: The purpose of this study was to describe reasons for referral of old patients to a psychiatric department providing full services for 252,000 inhabitants. METHODS: All 975 admissions within 2 years were evaluated in this prospective study. RESULTS: During the study period 645 patients aged over 64 years were admitted 830 times to the gerontopsychiatric wards. About half of them were referred by physicians in private practice, about 30% came via the emergency room, and 18% were transferred from other departments or hospitals. The most frequent reasons for referral were disorientation, confusion, or delirious states (31.9%), hallucinations or delusion (21.6%), aggression or excitation (17.7%), depression (17.6%), refusal of feeding or drinking (14.4%), agitation or restlessness (13.9%), suicidality or suicide attempt (13.3%), and disruptive behaviour (13.0%). In 81.8% of the cases, behaviour endangering themselves or others was an important cause of referral. The amount of specific gerontopsychiatric beds needed in hospital was estimated as ten beds per 10,000 inhabitants aged 65 or more. CONCLUSIONS: The greatest proportion of the patients referred to gerontopsychiatric wards showed behaviour endangering themselves or others-typical indications for psychiatric inpatient treatment.

RT-PCR-based detection of circulating calcitonin-producing cells in patients with advanced medullary thyroid cancer.

In patients with medullary thyroid carcinoma (MTC) the clinical course of disease ranges from rapid tumor progression to long-lasting stable disease. The purpose of the present study was to investigate whether circulating tumor cells can be detected in the peripheral blood of patients with MTC by RT-PCR targeted to calcitonin (CT) mRNA and whether the results of this method are correlated with disease manifestation and metastatic potential. Blood samples from 19 consecutive patients with MTC and elevated CT levels were analyzed. Four had newly diagnosed MTC, and 15 patients had undergone total thyroidectomy. Six of 19 patients had detectable CT mRNA by RT-PCR. CT levels in the CT mRNA-positive patients were significantly higher than those in CT mRNA-negative patients [2,239-265,313 pg/ml; median 80,921 pg/ml (n = 6) vs. 70-46,787 pg/ml; median, 932 pg/ml (n = 13); P = 0.006]. CT mRNA was detectable in 5 of 8 patients with distant metastases, in 1 of 6 patients with local/regional lymph node metastases, but in none of the patients with newly diagnosed, organ-confined MTC (n = 2) or surgically treated MTC without tumor manifestation by various imaging studies (n = 3). In peripheral blood from 10 healthy volunteers and 21 patients with benign thyroid nodules, no CT RNA could be detected. In conclusion, an RT-PCR-based procedure was established to detect circulating CT-producing cells in the peripheral blood of patients with MTC. RT-PCR results seem to reflect tumor spread and aggressiveness and thus may help with early identification of patients with disseminated and rapidly progressive disease.

Development of a flow injection capillary chemiluminescent ELISA using an imprinted polymer instead of the antibody.

A flow injection competitive assay analogous to enzyme immunoassays has been developed using a molecularly imprinted polymer instead of the antibody. A glass capillary was modified by covalently attaching an imprinted polymer to the inner capillary wall. The herbicide 2,4-dichlorophenoxyacetic acid was used as a model analyte. The analyte was labeled with tobacco peroxidase, and chemiluminescence was used for detection in combination with a photomultiplier tube or a CCD camera. In a competitive mode, the analyte-peroxidase conjugate was passed together with the free analyte through the polymer-coated capillary mounted in a flow system. After a washing step, the chemiluminescent substrate was injected and the bound fraction of the conjugate was quantified by measuring the intensity of the emitted light. Calibration curves corresponding to analyte concentrations ranging from 0.5 ng mL(-1) to 50 microg mL(-1) (2.25 nM-225 microM) were obtained. A lowered detection limit by 2 orders of magnitude was obtained when detection was done in discontinuous mode and the chemiluminescence light was conducted inside the photomultiplier tube by an optical fiber bundle, thus yielding a dynamic range of 5 pg mL(-1)-100 ng mL(-1) (22.5 pM-450 nM).

Effect of gluconic acid as a secondary carbon source on non-growing L-lysine producers cells of Corynebacterium glutamicum. Purification and properties of 6-phosphogluconate dehydrogenase.

We studied the production of L-lysine in Corynebacterium glutamicum ATCC 21543 non growing cells obtained by nutrient limitation. Statistical analysis revealed significant differences in the L-lysine titers of glucose, gluconic acid or glucose-gluconic acid cultures. Higher L-lysine titer obtained in batch cultures with mixed carbon sources or gluconic acid alone were found to be associated with a high 6-phosphogluconate dehydrogenase activity (6PGDH, E.C.1.1.1.44). This enzyme is a pivotal enzyme within the hexose monophosphate pathway, and thus of importance for L-lysine production. 6PGDH was purified and characterized. The purified enzyme migrates as a single band on sodium dodecyl sulfate-polyacrylamide gel electrophoresis with a molecular mass of 52.5 kDa. The molecular mass of the native enzyme was estimated to be 120 kDa by molecular exclusion chromatography, thus suggesting a homodimeric structure. The amino terminal sequence shows a strong similarity (a match of 86% of the first 20 amino acid) to the 6PGDH from other microorganisms such as, E. coli and B. subtilis. The pI of the dimeric native enzyme and the optimum pH were 6.2 and 8.0, respectively. For the oxidative decarboxylation of 6-phosphogluconate, K(m) of 71 &mgr;M and 43 &mgr;M were obtained for 6-phosphogluconate and NADP(+), respectively.

Chemiluminescence imaging ELISA using an imprinted polymer as the recognition element instead of an antibody.

An imaging assay analogous to competitive enzyme immunoassays has been developed using a molecularly imprinted polymer instead of an antibody. The antigen 2,4-dichlorophenoxyacetic acid (2,4-D) was labeled with tobacco peroxidase, and the chemiluminescence reaction of luminol was used for detection. Microtiter plates (96 or 384 wells) were coated with polymer microspheres imprinted with 2,4-D, which were fixed in place by using poly(vinyl alcohol) as glue. In a competitive mode, the analyte-peroxidase conjugate was incubated with the free analyte in the microtiter plate, after which the bound fraction of the conjugate was quantified. After addition of the chemiluminescent substrates, light emission was measured in a high-throughput imaging format with a CCD camera. Calibration curves corresponding to analyte concentrations ranging from 0.01 to 100 microg/mL were obtained.

Induction of a cellular and humoral immune response against preprocalcitonin by genetic i: a potential new treatment for medullary thyroid carcinoma.

Currently, no effective therapy exists for patients suffering from progressive medullary thyroid carcinoma (MTC), a calcitonin (CT)-secreting C cell tumor. As CT, which arises from the precursor protein preprocalcitonin (PPCT), is expressed by almost all MTC cases, these molecules may represent target antigens for immunotherapy against MTC. In our study we investigated whether DNA immunization is able to induce cellular and humoral immune responses against human PPCT (hPPCT) in mice. Antigen-encoding expression plasmids were delivered intradermally by gene gun. One group of mice received DNA encoding hPPCT only. Two groups were coinjected with mouse cytokine genes. We observed in lymphocyte proliferative assays substantial proliferation against hPPCT in mice coinjected with the granulocyte-macrophage colony-stimulating factor (GM-CSF) gene, in contrast to mice vaccinated with hPPCT expression plasmid only. In addition, codelivery of the GM-CSF gene augmented the frequency of anti-hPPCT antibody seroconversions in sera of immunized animals, as shown by enzyme-linked immunosorbent assay. These results illustrate that cellular and humoral immune responses against hPPCT can be generated by DNA immunization and increased by coinjection of the GM-CSF gene. Our findings may have implications for the use of DNA immunization as a potential novel immunotherapeutic treatment for patients suffering from progressive MTC.

A subtherapeutic international normalized ratio despite increasing doses of warfarin: could this be malabsorption?

OBJECTIVE: To describe a case of warfarin resistance apparently caused by malabsorption and to review the literature regarding warfarin resistance. CASE SUMMARY: A 28-year-old renal transplant patient with systemic lupus erythematosus was admitted for upper extremity thrombophlebitis. Resistance to oral warfarin was demonstrated. Potential causes were investigated. The trapezoidal rule was used to compare the area under the curve for intravenous versus oral dosing of warfarin. The usual bioavailability of warfarin should be 100%. In this patient, warfarin bioavailability after oral dosing was 1.5%. Three potential causes, malabsorption (FF), enzymatic degradation (FG), and first-pass extraction in the portal circulation (FH), are discussed. CONCLUSION: This case demonstrates resistance to warfarin presumably caused by malabsorption.

New configurations and applications of molecularly imprinted polymers.

Molecularly imprinted polymers (MIPs) are applicable in a variety of different configurations. For example, bulk polymers imprinted with beta-lactam antibiotics are presented to be used as stationary phases for the chromatographic separation of beta-lactam antibiotics with both aqueous and organic mobile phases. However, in some analytical applications, monosized spherical beads are preferred over the currently used ground bulk polymers. A precipitation polymerization technique allows preparation of monosized spherical imprinted beads with diameters down to 200 nm having excellent recognition properties for different target molecules. Nevertheless, with current imprinting protocols a substantial amount of template has to be used to prepare the polymer. This can be problematic if the template is poorly soluble, expensive or difficult to obtain. It is shown that for analytical applications, the functional monomer:template ratio can be drastically increased without jeopardizing the polymer's recognition properties. Furthermore, a substantial reduction of the degree of crosslinking is demonstrated, resulting in much more flexible polymers that are useful for example the preparation of thin imprinted films and membranes for sensors. Apart from analysis, MIPs also are applicable in chemical or enzymatic synthesis. For example, MIPs using the product of an enzyme reaction as template are utilized for assisting the synthetic reaction by continuously removing the product from the bulk solution by complexation. This results in an equilibrium shift towards product formation.

Imprinted polymer-based sensor system for herbicides using differential-pulse voltammetry on screen-printed electrodes.

A sensor system for the herbicide 2,4-dichlorophenoxy-acetic acid has been developed based on specific recognition of the analyte by a molecularly imprinted polymer and electrochemical detection using disposable screen-printed electrodes. The method involves a competitive binding step with a nonrelated electrochemically active probe. For batch binding assays, imprinted polymer particles are incubated in suspension with the analyte and the probe, followed by centrifugation and quantification of the unbound probe in the supernatant. Two different compounds, namely 2,4-dichlorophenol and homogentisic acid, were tested as potential electroactive probes. Both compounds could be conveniently detected by differential-pulse voltammetry on screen-printed, solvent-resistant three-electrode systems having carbon working electrodes. Whereas 2,4-dichlorophenol showed very high nonspecific binding to the polymer, homogentisic acid bound specifically to the imprinted sites and thus allowed calibration curves for the analyte in the micromolar range to be recorded. An integrated sensor was developed by coating the imprinted polymer particles directly onto the working electrode. Following incubation of the modified electrode in a solution containing the analyte and the probe, the bound fraction of the probe is quantified. This system provides a cheap, disposable sensor for rapid determination of environmentally relevant and other analytes.

Plastic antibodies: developments and applications.

Antibodies are natural receptor molecules produced after contact with an antigen. In an attempt to mimic nature, the technique of molecular imprinting has been developed, which allows specific recognition sites to be formed in synthetic polymers through the use of templates. These recognition sites mimic the binding sites of antibodies and may be substituted for them in applications such as affinity separation, assay systems and biosensors. The stability and low cost of these polymers make them particularly attractive to industry.

Improved capillary electrophoretic separation of glycosylated oligopeptides through addition of poly(vinyl alcohol), and analysis by electrospray mass spectrometry.

A method for the analysis of O-glycosylation of peptides has been developed, combining capillary electrophoretic (CE) separation and electrospray ionization mass spectrometry. Synthetic peptides with apomucin 'tandem repeat' sequences which present potential O-glycosylation sites on threonine and serine residues were used as model system. In vitro O-glycosylated peptide samples were obtained by incubation of the peptides with human gastric microsomal homogenates containing N-acetylgalactosamine transferase activity in the presence of uridyl diphosphate N-acetylgalactosamine (UDP-GalNAc). CE was carried out in the presence of the linear polymer poly(vinyl alcohol) in the electrophoresis solvent, resulting in a greatly improved separation of the up to five different glycoforms of peptides with lengths of 8, 16 or 23 amino acids, and the unglycosylated peptides. After separation and peak collection, the number of modifications with N-acetyl galactosamine (GalNAc) could be determined by electrospray ionization mass spectrometry. The glycosylation pattern was shown to depend on the amino acid sequence of the peptides.

Some new developments and challenges in non-covalent molecular imprinting technology.

The technique of molecular imprinting allows the formation of specific recognition and catalytic sites in macromolecules via the use of templates. Molecularly imprinted polymers have been applied in an increasing number of applications where molecular binding events are of interest. These include the use of molecularly imprinted polymers as tailor-made separation materials, antibody and receptor binding site mimics in recognition and assay systems, enzyme mimics for catalytic applications and as recognition elements in biosensors. The stability and low cost of molecularly imprinted polymers make them advantageous for use in analysis as well as in industrial-scale production and application.