Reversible Electrochemical Anionic Redox in Rechargeable Multivalent-Ion Batteries.

Rechargeable multivalent-ion batteries are of significant interest due to the high specific capacities and earth abundance of their metal anodes, though few cathode materials permit multivalent ions to electrochemically intercalate within them. The crystalline chevrel phases are among the few cathode materials known to reversibly intercalate multivalent cations. However, to date, no multivalent-ion intercalation electrodes can match their reversibility and stability, in part due to the lack of design rules that guide how ion intercalation and electron charge transfer are coupled up from the atomic scale. Here, we elucidate the electronic charge storage mechanism that occurs in chevrel phase (Mo6Se8, Mo6S8) electrodes upon the electrochemical intercalation of multivalent cations (Al3+, Zn2+), using solid-state nuclear magnetic resonance spectroscopy, synchrotron X-ray absorption near edge structure measurements, operando synchrotron diffraction, and density functional theory calculations. Upon cation intercalation, electrons are transferred selectively to the anionic chalcogen framework, while the transition metal octahedra are redox inactive. This reversible electrochemical anionic redox, which occurs without breaking or forming chemical bonds, is a fundamentally different charge storage mechanism than that occurring in most transition metal-containing intercalation electrodes using anionic redox to enhance energy density. The results suggest material design principles aimed at realizing new intercalation electrodes that enable the facile electrochemical intercalation of multivalent cations.

Reversible Zinc Electrodeposition at -60 °C Using a Deep Eutectic Electrolyte for Low-Temperature Zinc Metal Batteries.

Rechargeable zinc (Zn) metal batteries are attractive for use as electrochemical energy storage systems on a global scale because of the low cost, high energy density, inherent safety, and strategic resource security of Zn metal. However, at low temperatures, Zn batteries typically suffer from high electrolyte viscosity and unfavorable ion transport properties. Here, we studied reversible Zn electrodeposition in mixtures of 1-ethyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide ([EMIm]TFSI) ionic liquid, γ-butyrolactone (GBL) organic solvent, and Zn(TFSI)2 zinc salt. The electrolyte mixtures enabled reversible Zn electrodeposition at temperatures as low as -60 °C. An electrolyte composed of 0.1 M Zn(TFSI)2 in [EMIm]TFSI:GBL with a volume ratio of 1:3 formed a deep eutectic solvent that optimized electrolyte conductivity, viscosity, and the zinc diffusion coefficient. Liquid-state 1H and 13C nuclear magnetic resonance (NMR) spectroscopy and molecular dynamic (MD) simulations indicate increased formation of contact ion pairs and the reduction of ion aggregates are responsible for the optimal composition.

The advent of membrane-less zinc-anode aqueous batteries with lithium battery-like voltage.

Zinc (Zn)-anode batteries, although safe and non-flammable, are precluded from promising applications because of their low voltage (<2 V) and poor rechargeability. Here, we report the fabrication of rechargeable membrane-less Zn-anode batteries with high voltage properties (2.5 to 3.4 V) achieved through coupling cathodes and Zn-anodes in gelled concentrated acid and alkaline solutions separated by a gelled buffer interlayer containing the working ions. The concentrated gelled buffer interlayers perform dual functions of regulating the pH of the system and acting as the source and sink of the working ions. With this strategy we show low-cost membrane-less 2.5 to 3.4 V Zn-manganese dioxide (MnO2) batteries capable of cycling 10-100% of 617 mA h g-1-MnO2 and 20-30% of 820 mA h g-1-Zn and demonstrate their application in electric vehicles. This strategy is then applied to other oxide-based cathode systems like Cu2O and V2O5, where voltages of 2 to 3 V are obtained in membrane-less batteries.

Hydroxyl Conducting Hydrogels Enable Low-Maintenance Commercially Sized Rechargeable Zn-MnO2 Batteries for Use in Solar Microgrids.

Zinc (Zn)-manganese dioxide (MnO2) rechargeable batteries have attracted research interest because of high specific theoretical capacity as well as being environmentally friendly, intrinsically safe and low-cost. Liquid electrolytes, such as potassium hydroxide, are historically used in these batteries; however, many failure mechanisms of the Zn-MnO2 battery chemistry result from the use of liquid electrolytes, including the formation of electrochemically inert phases such as hetaerolite (ZnMn2O4) and the promotion of shape change of the Zn electrode. This manuscript reports on the fundamental and commercial results of gel electrolytes for use in rechargeable Zn-MnO2 batteries as an alternative to liquid electrolytes. The manuscript also reports on novel properties of the gelled electrolyte such as limiting the overdischarge of Zn anodes, which is a problem in liquid electrolyte, and finally its use in solar microgrid applications, which is a first in academic literature. Potentiostatic and galvanostatic tests with the optimized gel electrolyte showed higher capacity retention compared to the tests with the liquid electrolyte, suggesting that gel electrolyte helps reduce Mn3+ dissolution and zincate ion migration from the Zn anode, improving reversibility. Cycling tests for commercially sized prismatic cells showed the gel electrolyte had exceptional cycle life, showing 100% capacity retention for >700 cycles at 9.5 Ah and for >300 cycles at 19 Ah, while the 19 Ah prismatic cell with a liquid electrolyte showed discharge capacity degradation at 100th cycle. We also performed overdischarge protection tests, in which a commercialized prismatic cell with the gel electrolyte was discharged to 0 V and achieved stable discharge capacities, while the liquid electrolyte cell showed discharge capacity fade in the first few cycles. Finally, the gel electrolyte batteries were tested under IEC solar off-grid protocol. It was noted that the gelled Zn-MnO2 batteries outperformed the Pb-acid batteries. Additionally, a designed system nameplated at 2 kWh with a 12 V system with 72 prismatic cells was tested with the same protocol, and it has entered its third year of cycling. This suggests that Zn-MnO2 rechargeable batteries with the gel electrolyte will be an ideal candidate for solar microgrid systems and grid storage in general.