A three dimensional drive system for use with fillable emission phantoms for SPECT and PET imaging.

Respiratory motion artefacts pose significant challenges for imaging of the lung and thorax. Dynamic phantoms have previously been applied to the study of respiratory motion, however, most moving platforms have been capable of movement in either one or two dimensions only. We describe a moving platform suitable for SPECT-CT and PET-CT imaging. The platform allows a fillable emission phantom to simulate rigid motion in three dimensions. Elliptical periodical motion of 1.5 cm in all three orthogonal planes was simulated using a series of cams moving a baseplate up and across a slope of 45°. The frequency of movement can be varied manually between 5 and 25 cycles per minute in a known calibrated and reproducible manner (This encompasses the range of physiological respiratory motion). Preliminary studies demonstrated that the phantom can be used to identify motion parameters and for the qualitative assessment of motion blurring in reconstructed images.

Oxygen transfer in a convection-enhanced hollow fiber bioartificial liver.

A mathematical model was developed to predict oxygen transport in a hollow fiber bioartificial liver device. The model parameters were taken from the HepatAssist 2000 device, a plasma perfused hollow fiber cartridge with primary hepatocytes seeded in the extracapillary space. Cellular oxygen uptake was based on Michaelis-Menten kinetics. Oxygen transport due to the convective flow of plasma into the extracapillary space was considered. The effect of modulating several important parameters was investigated, namely, the Michaelis-Menten constant V(m) (the maximum oxygen consumption per unit volume of the cell mass), the oxygen partial pressure, the flow rate of the plasma at device inlet, and the permeability of the cell mass contained in the extracapillary space. A computer implementation of the model was used to assess whether a given number of cells could be maintained within such a device. The results suggest that a substantial proportion of the hepatocytes are exposed to hypoxic conditions under which metabolism may be impaired.

Oxygen transfer in a diffusion-limited hollow fiber bioartificial liver.

A mathematical model was developed to predict oxygen transport in a hollow fiber bioartificial liver device. Model parameters were taken from the Hepatix ELAD configuration; a blood perfused hollow fiber cartridge with hepatocytes seeded in the extracapillary space. Cellular oxygen uptake is based on Michaelis-Menten kinetics, and nonlinear oxygen transport in the blood is considered. The effect of modulating three important parameters is investigated, namely, the Michaelis-Menten constants Vm (volumetric oxygen consumption of the hepatocytes) and Km (half-saturation constant), and hollow fiber oxygen permeability. A computer implementation of the model is used to assess whether a given cell mass could be maintained within such a device. The results suggest that liver cell lines possessing low rates of oxygen consumption could be maintained if membranes of sufficiently high oxygen permeability are used. For primary hepatocytes, which have much higher oxygen demands, radial transport of oxygen is rate limiting, and the axial-flow hollow fiber cartridge is thus an inappropriate design for use as a bioartificial liver with primary hepatocytes.