Comparative mapping of the Oregon Wolfe Barley using doubled haploid lines derived from female and male gametes.

The Oregon Wolfe Barley mapping population is a resource for genetics research and instruction. Prior reports are based on a population of doubled haploid (DH) lines developed by the Hordeum bulbosum (H.b.) method, which samples female gametes. We developed new DH lines from the same cross using anther culture (A.C.), which samples male gametes. Linkage maps were generated in each of the two subpopulations using the same 1,328 single nucleotide polymorphism markers. The linkage maps based on DH lines derived from the products of megasporogeneis and microsporogenesis revealed minor differences in terms of estimated recombination rates. There were no differences in locus ordering. There was greater segregation distortion in the A.C.-derived subpopulation than in the H.b.-derived subpopulation, but in the region showing the greatest distortion, the cause was more likely allelic variation at the ZEO1 plant height locus rather than to DH production method. The effects of segregation distortion and pleiotropy had greater impacts on estimates of quantitative trait locus effect than population size for reproductive fitness traits assayed under greenhouse conditions. The Oregon Wolfe Barley (OWB) population and data are community resources. Seed is available from three distribution centers located in North America, Europe, and Asia. Details on ordering seed sets, as well as complete genotype and phenotype data files, are available at http://wheat.pw.usda.gov/ggpages/maps/OWB/ .

Structural and functional characterization of a winter malting barley.

The development of winter malting barley (Hordeum vulgare L.) varieties is emerging as a worldwide priority due to the numerous advantages of these varieties over spring types. However, the complexity of both malting quality and winter hardiness phenotypes makes simultaneous improvement a challenge. To obtain an understanding of the relationship between loci controlling winter hardiness and malt quality and to assess the potential for breeding winter malting barley varieties, we structurally and functionally characterized the six-row accession "88Ab536", a cold-tolerant line with superior malting quality characteristics that derives from the cross of NE76129/Morex//Morex. We used 4,596 SNPs to construct the haplotype structure of 88Ab536 on which malting quality and winter hardiness loci reported in the literature were aligned. The genomic regions determining malting quality and winter hardiness traits have been defined in this founder germplasm, which will assist breeders in targeting regions for marker-assisted selection. The Barley1 GeneChip array was used to functionally characterize 88Ab536 during malting. Its gene expression profile was similar to that of the archetypical malting variety Morex, which is consistent with their similar malting quality characteristics. The characterization of 88Ab536 has increased our understanding of the genetic relationships of malting quality and winter hardiness, and will provide a genetic foundation for further development of more cold-tolerant varieties that have malt quality characteristics that meet or exceed current benchmarks.

Phalloplasty in complete aphallia: pedicled anterolateral thigh flap.

A phalloplasty using the pedicled anterolateral thigh flap in three patients with aphallia is described. The technique, its advantages and disadvantages are discussed.

Genetics of phenotypic plasticity: QTL analysis in barley, Hordeum vulgare.

Phenotypic plasticity is the variation in phenotypic traits produced by a genotype in different environments. In contrast, environmental canalization is defined as the insensitivity of a genotype's phenotype to variation in environments. Despite the extensive literature on the evolutionary significance and potential genetic mechanisms driving plasticity and canalization, few studies tried to unravel the genetic basis of this phenomenon. Using both simulations and real data from barley (Hordeum vulgare), we used QTL mapping to obtain insights into the genetics of phenotypic plasticity. We explored two ways of quantifying phenotypic plasticity, namely the phenotypic variance across environments and the Finlay-Wilkinson's regression slope. Each relates to a different concept of stability. Through QTL detection with real and simulated data, we show that each measure of plasticity detects specific types of plasticity QTL. Most of the plasticity QTLs were detected in the data set with the lowest number of environments. All plasticity QTL co-located with loci showing QTL x E interaction and there were no QTL that only affected plasticity. The number of environments that are considered and their homogeneity is a key to interpret the genetic control of phenotypic plasticity. Regulatory pathways of plasticity may vary from one set of environments to another due to unique features of each environment. Therefore, with an increasing number of environments, it may become impossible to detect a single 'consistent' regulatory pathway for all environments.

Effects of photo and thermo cycles on flowering time in barley: a genetical phenomics approach.

The effects of synchronous photo (16 h daylength) and thermo (2 degrees C daily fluctuation) cycles on flowering time were compared with constant light and temperature treatments using two barley mapping populations derived from the facultative cultivar 'Dicktoo'. The 'Dicktoo'x'Morex' (spring) population (DM) segregates for functional differences in alleles of candidate genes for VRN-H1, VRN-H3, PPD-H1, and PPD-H2. The first two loci are associated with the vernalization response and the latter two with photoperiod sensitivity. The 'Dicktoo'x'Kompolti korai' (winter) population (DK) has a known functional polymorphism only at VRN-H2, a locus associated with vernalization sensitivity. Flowering time in both populations was accelerated when there was no fluctuating factor in the environment and was delayed to the greatest extent with the application of synchronous photo and thermo cycles. Alleles at VRN-H1, VRN-H2, PPD-H1, and PPD-H2--and their interactions--were found to be significant determinants of the increase/decrease in days to flower. Under synchronous photo and thermo cycles, plants with the Dicktoo (recessive) VRN-H1 allele flowered significantly later than those with the Kompolti korai (recessive) or Morex (dominant) VRN-H1 alleles. The Dicktoo VRN-H1 allele, together with the late-flowering allele at PPD-H1 and PPD-H2, led to the greatest delay. The application of synchronous photo and thermo cycles changed the epistatic interaction between VRN-H2 and VRN-H1: plants with Dicktoo type VRN-H1 flowered late, regardless of the allele phase at VRN-H2. Our results are novel in demonstrating the large effects of minor variations in environmental signals on flowering time: for example, a 2 degrees C thermo cycle caused a delay in flowering time of 70 d as compared to a constant temperature.

Pyramiding and dissecting disease resistance QTL to barley stripe rust.

Quantitative resistance (QR) to disease is usually more durable than qualitative resistance, but its genetic basis is not well understood. We used the barley/barley stripe rust pathosystem as a model for the characterization of the QR phenotype and associated genomic regions. As an intermediate step in the preparation of near-isogenic lines representing individual QTL alleles and combinations of QTL alleles in a homogeneous genetic background, we developed a set of QTL introgression lines in a susceptible background. These intermediate barley near-isogenic (i-BISON) lines represent disease resistance QTL combined in one-, two-, and three-way combinations in a susceptible background. We measured four components of disease resistance on the i-BISON lines: latent period, infection efficiency, lesion size, and pustule density. The greatest differences between the target QTL introgressions and the susceptible controls were for the latter three traits. On average, however, the QTL introgressions also had longer latent periods than the susceptible parent (Baronesse). There were significant differences in the magnitudes of effects of different QTL alleles. The 4H QTL allele had the largest effect, followed by the alleles on 1H and 5H. Pyramiding multiple QTL alleles led to higher levels of resistance in terms of all components of QR except latent period.

Positional relationships between photoperiod response QTL and photoreceptor and vernalization genes in barley.

Winterhardiness has three primary components: photoperiod (day length) sensitivity, vernalization response, and low temperature tolerance. Photoperiod and vernalization regulate the vegetative to reproductive phase transition, and photoperiod regulates expression of key vernalization genes. Using two barley mapping populations, we mapped six individual photoperiod response QTL and determined their positional relationship to the phytochrome and cryptochrome photoreceptor gene families and the vernalization regulatory genes HvBM5A, ZCCT-H, and HvVRT-2. Of the six photoreceptors mapped in the current study (HvPhyA and HvPhyB to 4HS, HvPhyC to 5HL, HvCry1a and HvCry2 to 6HS, and HvCry1b to 2HL), only HvPhyC coincided with a photoperiod response QTL. We recently mapped the candidate genes for the 5HL VRN-H1 (HvBM5A) and 4HL VRN-H2 (ZCCT-H) loci, and in this study, we mapped HvVRT-2, the barley TaVRT-2 ortholog (a wheat flowering repressor regulated by vernalization and photoperiod) to 7HS. Each of these three vernalization genes is located in chromosome regions determining small photoperiod response QTL effects. HvBM5A and HvPhyC are closely linked on 5HL and therefore are currently both positional candidates for the same photoperiod effect. The coincidence of photoperiod-responsive vernalization genes with photoperiod QTL suggests vernalization genes should also be considered candidates for photoperiod effects.

Molecular mapping of Loci conferring resistance to different pathotypes of the spot blotch pathogen in barley.

ABSTRACT Spot blotch, caused by Cochliobolus sativus, is an important disease of barley in many production areas and is best controlled through the deployment of resistant cultivars. Information on the genetics of resistance in various sources can be useful in developing effective breeding strategies. Parents of the doubled haploid mapping population Calicuchima-sib/ Bowman-BC (C/B) exhibit a differential reaction to pathotypes 1 and 2 of C. sativus. To elucidate the genetics of spot blotch resistance in this population, C/B progeny were evaluated with both pathotypes at the seedling stage in the greenhouse and at the adult plant stage in the field. At the seedling stage, progeny segregated 84 resistant to 26 susceptible based on the qualitative analysis of infection response (IR) data to pathotype 1. This fit best to a 3:1 ratio, indicating that two genes were involved in conferring resistance. Quantitative analysis of the raw IR data to pathotype 1 revealed a single quantitative trait locus (QTL) on chromosome 4(4H) explaining 14% of the phenotypic variance. Adult plant resistance to pathotype 1 was conferred by QTL on chromosome 2(2H) and chromosome 3(3H), explaining 21 and 32% of the phenotypic variation, respectively. Bowman contributed the resistance alleles on chromosome 3(3H) and chromosome 4(4H), whereas Calicuchima-sib contributed the resistance allele on chromosome 2(2H). Resistance to pathotype 2 was conferred by a single gene (designated Rcs6) on chromosome 5(1H) based on qualitative analysis of data. Rcs6 was effective at both the seedling and adult plant stages and was contributed by Calicuchima-sib. This result was corroborated in the quantitative analysis of raw IR (seedling stage) and disease severity (adult plant stage) data as a single major effect (r(2) = 0.93 and 0.88, respectively) QTL was identified on chromosome 5(1H). Progeny with resistance to both pathotypes were identified in the C/B population and may be useful in programs breeding for spot blotch resistance.

Comprehensive genetic analyses reveal differential expression of spot blotch resistance in four populations of barley.

Spot blotch, caused by Cochliobolus sativus, is an important disease of barley in the Upper Midwest region of the United States. The resistance of six-rowed malting cultivars like Morex has remained effective for over 40 years and is considered durable. Previous research on Steptoe/Morex (S/M), a 6x6-rowed doubled haploid (DH) population, showed that seedling resistance is controlled by a single gene (Rcs5) on chromosome 1(7H) and adult plant resistance by two quantitative trait loci (QTL): one of the major effect on chromosome 5(1H) explaining 62% of the phenotypic variance and a second of minor effect on chromosome 1(7H) explaining 9% of the phenotypic variance. To corroborate these results in a 2x6-rowed DH population, composite interval mapping (CIM) was performed on Harrington/Morex (H/M). As in the S/M population, a single major gene (presumably Rcs5) on chromosome 1(7H) conferred resistance at the seedling stage. However, at the adult plant stage, the results were markedly different as no chromosome 5(1H) effect whatsoever was detected. Instead, a QTL at or near Rcs5 on chromosome 1(7H) explained nearly all of the phenotypic variance (75%) for disease severity. To determine whether this result might be due to the genetic background of the two-rowed susceptible parent Harrington, we analyzed another DH population that included the same resistance donor (Morex) and another six-rowed susceptible cultivar Dicktoo (D/M). Three QTL conferred seedling resistance in the D/M population: one near Rcs5 on chromosome 1(7H) explaining 30%, a second near the centromere of chromosome 1(7H) explaining 9%, and a third on the short arm of chromosome 3(3H) explaining 19% of the phenotypic variation. As in the H/M population, no chromosome 5(1H) QTL was detected for adult plant resistance in the D/M population. Instead, three QTL on other chromosomes explained most of the variation: one on the short arm of chromosome 3(3H) explaining 36%, a second on the long arm of chromosome 3(3H) explaining 11%, and a third at or near Rcs5 on chromosome 1(7H) explaining 20% of the phenotypic variation. These data demonstrate the complexity of expression of spot blotch resistance in different populations and have important implications in breeding for durable resistance.

Effect of population size on the estimation of QTL: a test using resistance to barley stripe rust.

The limited population sizes used in many quantitative trait locus (QTL) detection experiments can lead to underestimation of QTL number, overestimation of QTL effects, and failure to quantify QTL interactions. We used the barley/barley stripe rust pathosystem to evaluate the effect of population size on the estimation of QTL parameters. We generated a large (n = 409) population of doubled haploid lines derived from the cross of two inbred lines, BCD47 and Baronesse. This population was evaluated for barley stripe rust severity in the Toluca Valley, Mexico, and in Washington State, USA, under field conditions. BCD47 was the principal donor of resistance QTL alleles, but the susceptible parent also contributed some resistance alleles. The major QTL, located on the long arm of chromosome 4H, close to the Mlo gene, accounted for up to 34% of the phenotypic variance. Subpopulations of different sizes were generated using three methods-resampling, selective genotyping, and selective phenotyping-to evaluate the effect of population size on the estimation of QTL parameters. In all cases, the number of QTL detected increased with population size. QTL with large effects were detected even in small populations, but QTL with small effects were detected only by increasing population size. Selective genotyping and/or selective phenotyping approaches could be effective strategies for reducing the costs associated with conducting QTL analysis in large populations. The method of choice will depend on the relative costs of genotyping versus phenotyping.

The Vrn-H2 locus is a major determinant of flowering time in a facultative x winter growth habit barley (Hordeum vulgare L.) mapping population.

With the aim of dissecting the genetic determinants of flowering time, vernalization response, and photoperiod sensitivity, we mapped the candidate genes for Vrn-H2 and Vrn-H1 in a facultative x winter barley mapping population and determined their relationships with flowering time and vernalization via QTL analysis. The Vrn-H2 candidate ZCCT-H genes were completely missing from the facultative parent and present in the winter barley parent. This gene was the major determinant of flowering time under long photoperiods in controlled environment experiments, irrespective of vernalization, and under spring-sown field experiments. It was the sole determinant of vernalization response, but the effect of the deletion was modulated by photoperiods when the vernalization requirement was fulfilled. There was no effect under short photoperiods. The Vrn-H1 candidate gene (HvBM5A) was mapped based on a microsatellite polymorphism we identified in the promoter of this gene. Otherwise, the HvBM5A alleles for the two parents were identical. Therefore, the significant flowering time QTL effect associated with this locus suggests tight linkage rather than pleiotropy. This QTL effect was smaller in magnitude than those associated with the Vrn-H2 locus and was significant in two-way interactions with Vrn-H2. The Vrn-H1 locus had no effect on vernalization response. Our results support the Vrn-H2/Vrn-H1 repressor/structural gene model for vernalization response in barley and suggest that photoperiod may also affect the Vrn genes or tightly linked loci.

Mapping Ds insertions in barley using a sequence-based approach.

A transposon tagging system, based upon maize Ac/Ds elements, was developed in barley (Hordeum vulgaresubsp. vulgare). The long-term objective of this project is to identify a set of lines with Ds insertions dispersed throughout the genome as a comprehensive tool for gene discovery and reverse genetics. AcTPase and Ds-bar elements were introduced into immature embryos of Golden Promise by biolistic transformation. Subsequent transposition and segregation of Ds away from AcTPase and the original site of integration resulted in new lines, each containing a stabilized Ds element in a new location. The sequence of the genomic DNA flanking the Ds elements was obtained by inverse PCR and TAIL-PCR. Using a sequence-based mapping strategy, we determined the genome locations of the Ds insertions in 19 independent lines using primarily restriction digest-based assays of PCR-amplified single nucleotide polymorphisms and PCR-based assays of insertions or deletions. The principal strategy was to identify and map sequence polymorphisms in the regions corresponding to the flanking DNA using the Oregon Wolfe Barley mapping population. The mapping results obtained by the sequence-based approach were confirmed by RFLP analyses in four of the lines. In addition, cloned DNA sequences corresponding to the flanking DNA were used to assign map locations to Morex-derived genomic BAC library inserts, thus integrating genetic and physical maps of barley. BLAST search results indicate that the majority of the transposed Ds elements are found within predicted or known coding sequences. Transposon tagging in barley using Ac/Ds thus promises to provide a useful tool for studies on the functional genomics of the Triticeae.

Marker assisted genetic analysis of non-brittle rachis trait in barley.

Brittle rachis is a head shattering mechanism of barley. Two tightly linked complementary genes, btr1 and btr2, were believed to control the non-brittle rachis trait. Position of non-brittle rachis loci btr1btr2 on the short arm of Chromosome 3 was investigated using RFLP markers. Two approaches were employed. First, a Hordeum vulgare subsp. spontaneum fragment that confers brittleness in a cv. Bowman near isogenic line was detected. This fragment is 18-33 cM in length and contains MWG798B, ABG057, MWG014, BCD706 and KFP216 markers of the short arm of Chromosome 3. In the second approach, position of btr1 locus in a H. vulgare subsp. spontaneum (Wadi Qilt 23-38)xH. vulgare subsp. vulgare (cv. Harrington) cross was detected using a selective genotyping approach in BC2F1 generation. F-tests and analysis of genotypic compositions of BC2F1 lines showed that btr1 locus, and supposedly the tightly linked btr2 locus, is in 4.3 cM KFP216-RisP114 interval of short arm of Chromosome 3. Results also yielded clues for the presence of at least two additional loci that affect the non-brittle rachis trait. Allelism tests using genotypes with known non-brittle rachis gene compositions provided additional evidence for presence of such loci.

Two loci on chromosome 5H determine low-temperature tolerance in a 'Nure' (winter) x 'Tremois' (spring) barley map.

Barley ( Hordeum vulgare subsp. vulgare) is an economically important diploid model for the Triticeae; and a better understanding of low-temperature tolerance mechanisms could significantly improve the yield of fall-sown cereals. We developed a new resource for genetic analysis of winter hardiness-related traits, the 'Nure' x 'Tremois' linkage map, based on a doubled-haploid population that is segregating for low-temperature tolerance and vernalization requirement. Three measures of low-temperature tolerance and one measure of vernalization requirement were used and, for all traits, QTLs were mapped on chromosome 5H. The vernalization response QTL coincides with previous reports at the Vrn-1/Fr1 region of the Triticeae. We also found coincident QTLs at this position for all measures of low-temperature tolerance. Using Composite Interval Mapping, a second proximal set, of coincident QTLs for low-temperature tolerance, and the accumulation of two different COR proteins (COR14b and TMC-Ap3) was identified. The HvCBF4 locus, or another member of the CBF loci clustered in this region, is the candidate gene underlying this QTL. There is a CRT/DRE recognition site in the promoter of cor14b with which a CBF protein could interact. These results support the hypothesis that highly conserved regulatory factors, such as members of the CBF gene family, may regulate the stress responses of a wide range of plant species.

Development and characterization of recombinant chromosome substitution lines (RCSLs) using Hordeum vulgare subsp. spontaneum as a source of donor alleles in a Hordeum vulgare subsp. vulgare background.

The ancestor of barley (Hordeum vulgare subsp. spontaneum) may be a source of novel alleles for crop improvement. We developed a set of recombinant chromosome substitution lines (RCSLs) using an accession of H. vulgare subsp. spontaneum (Caesarea 26-24, from Israel) as the donor and Hordeum vulgare subsp. vulgare 'Harrington' (the North American malting quality standard) as the recurrent parent via two backcrosses to the recurrent parent, followed by six generations of selfing. Here we report (i) the genomic architecture of the RCSLs, as inferred by simple sequence repeat (SSR) markers, and (ii) the effects of H. vulgare subsp. spontaneum genome segment introgressions in terms of three classes of phenotypes: inflorescence yield components, malting quality traits, and domestication traits. Significant differences among the RCSLs were detected for all phenotypes measured. The phenotypic effects of the introgressions were assessed using association analysis, and these were referenced to quantitative trait loci (QTL) reported in the literature. Hordeum vulgare subsp. spontaneum, despite its overall inferior phenotype, contributed some favorable alleles for agronomic and malting quality traits. In most cases, the introgression of the ancestral genome resulted in a loss of desirable phenotypes in the cultivated parent. Although disappointing from a plant breeding perspective, this finding may prove to be a useful tool for gene discovery.

Mapping and pyramiding of qualitative and quantitative resistance to stripe rust in barley.

The identification and location of sources of genetic resistance to plant diseases are important contributions to the development of resistant varieties. The combination of different sources and types of resistance in the same genotype should assist in the development of durably resistant varieties. Using a doubled haploid (DH), mapping population of barley, we mapped a qualitative resistance gene ( Rpsx) to barley stripe rust in the accession CI10587 (PI 243183) to the long arm of chromosome 1(7H). We combined the Rpsx gene, through a series of crosses, with three mapped and validated barley stripe rust resistance QTL alleles located on chromosomes 4(4H) (QTL4), 5(1H) (QTL5), and 7(5H) (QTL7). Three different barley DH populations were developed from these crosses, two combining Rpsx with QTL4 and QTL7, and the third combining Rpsx with QTL5. Disease severity testing in four environments and QTL mapping analyses confirmed the effects and locations of Rpsx, QTL4, and QTL5, thereby validating the original estimates of QTL location and effect. QTL alleles on chromosomes 4(4H) and 5(1H) were effective in decreasing disease severity in the absence of the resistance allele at Rpsx. Quantitative resistance effects were mainly additive, although magnitude interactions were detected. Our results indicate that combining qualitative and quantitative resistance in the same genotype is feasible. However, the durability of such resistance pyramids will require challenge from virulent isolates, which currently are not reported in North America.

High frequency plant regeneration from immature embryos of an elite barley cultivar (Hordeum vulgare L. cv. Morex).

An efficient plant regeneration system was developed for Hordeum vulgare L. 'Morex' barley, an important United States malting cultivar. The protocol was based on a series of experiments involving the sizes of immature embryos and the culture media. We found that the embryo size is critical for the establishment of embryogenic callus. Smaller embryos (0.5-1.5 mm) showed a much higher ability to produce embryogenic callus capable of regenerating green plants with fewer albinos than did the larger embryos (1.6-3.0 mm). Either 3 mg/l 2,4-dichlorophenoxyacetic acid or dicamba in modified Murashige and Skoog's (MS) medium was optimum for the induction of embryogenic callus. The embryogenic callus maintained high regeneration during six subcultures in the callus induction medium. Efficient shoot regeneration was obtained on modified MS medium containing 0.5-1.0 mg/l 6-benzylaminopurine (BA). Regenerated shoots were rooted on half-strength MS medium containing 0.2 mg/l IBA. Plants were successfully transferred to soil and grown to maturity in the greenhouse. This efficient plant regeneration system provides a foundation for generating transgenic plants of this important barley cultivar.

Genetic diversity in three groups of barley germplasm assessed by simple sequence repeats.

Genetic diversity can be measured by several criteria, including phenotype, pedigree, allelic diversity at marker loci, and allelic diversity at loci controlling phenotypes of interest. Abundance, high level of polymorphism, and ease of genotyping make simple sequence repeats (SSRs) an excellent molecular marker system for genetics diversity analyses. In this study, we used a set of mapped SSRs to survey three representative groups of barley germplasm: a sample of crop progenitor (Hordeum vulgare subsp. spontaneum) accessions, a group of mapping population parents, and a group of varieties and elite breeding lines. The objectives were to determine (i) how informative SSRs are in these three sets of barley germplasm resources and (ii) the utility of SSRs in classifying barley germplasm. A total of 687 alleles were identified at 42 SSR loci in 147 genotypes. The number of alleles per locus ranged from 4 to 31, with an average of 16.3. Crop progenitors averaged 10.3 alleles per SSR locus, mapping population parents 8.3 alleles per SSR locus, and elite breeding lines 5.8 alleles per SSR locus. There were many exclusive (unique) alleles. The polymorphism information content values for the SSRs ranged from 0.08 to 0.94. The cluster analysis indicates a high level of diversity within the crop progenitors accessions and within the mapping population parents. It also shows a lower level of diversity within the elite breeding germplasm. Our results demonstrate that this set of SSRs was highly informative and was useful in generating a meaningful classification of the germplasm that we sampled. Our long-term goal is to determine the utility of molecular marker diversity as a tool for gene discovery and efficient use of germplasm.