Umbilical cord blood therapy to prevent progression of COVID-19 related pneumonia: a structured summary of a study protocol for a pilot randomised controlled trial.

OBJECTIVES: Objective: To undertake a pilot, feasibility RCT of umbilical cord blood derived cell therapy for treatment of adult patients infected with SARS-CoV-2 virus related moderate-to-severe pneumonia to prevent progression to severe ARDS. HYPOTHESIS: Expanded cord blood derived cell therapy will be feasible, well tolerated and show potential efficacy in the treatment of acute COVID-19 related moderate to severe pneumonia in adult patients because of their powerful anti-inflammatory and immunomodulatory properties. TRIAL DESIGN: Pilot, parallel design randomised controlled trial. PARTICIPANTS: The trial will recruit 24 hospitalised patients with confirmed SARS-CoV-2 infection and pneumonia from July to December 2020 at Monash Medical Centre in Melbourne, Australia. INTERVENTION AND COMPARATOR: Intervention: Intravenous injection of expanded umbilical cord blood cells at a dose of 5 million cells/kg (maximum dose - 500 million cells). Cell infusion will occur over 30-60 minutes through a peripheral intravenous cannula. Standard supportive care will continue as needed. Comparator: Standard supportive care. MAIN OUTCOMES: Safety and tolerability of cell administration within first 24 hours of administration; clinical improvement on a seven-category clinical improvement ordinal scale. RANDOMISATION: Randomisation will be done using computer generated allocation to intervention/ control groups in a 1:1 ratio (in blocks of 6) using sealed opaque envelopes. BLINDING (MASKING): This will be an unblinded study, given that it is the first study using expanded cord blood cells in COVID-19 patients. There will be no placebo infusion. NUMBERS TO BE RANDOMISED (SAMPLE SIZE): Twelve participants in each group. Total n=24. TRIAL STATUS: CBC-19 protocol v2, dated 23rd April 2020. Recruitment has not started yet. Estimated recruitment timeline is between 1st July - 31st December 2020. TRIAL REGISTRATION: Australian New Zealand Clinical Trials Registry, ACTRN12620000478910, registered 16th April 2020. FULL PROTOCOL: The full protocol is attached as an additional file, accessible from the Trials website (Additional file 1). In the interest in expediting dissemination of this material, the familiar formatting has been eliminated; this Letter serves as a summary of the key elements of the full protocol.

The binding of boronated peptides to low affinity mammalian saccharides.

A 54-member library of boronated octapeptides, with all but the boronated residue being proteinogenic, was tested for affinity to a set of saccharides commonly found on the terminus of mammalian glycans. After experimentation with a high-throughput dye-displacement assay, attention was focused on isothermal titration calorimetry as a tool to provide reliable affinity data, including enthalpy and entropy of binding. A small number of boronated peptides showed higher affinity and significant selectivity for N-acetylneuraminic acid over methyl-α-d-galactopyranoside, methyl-α/ß-l-fucopyranoside and N-acetyl-d-glucosamine. Thermodynamic data showed that for most of the boronated peptides studied, saccharide binding was associated with a significant increase in entropy, presumably resulting from the displacement of semiordered water molecules from around the sugar and/or peptide.

Chitosan-coated amyloid fibrils increase adipogenesis of mesenchymal stem cells.

Mesenchymal stem cells (MSCs) have the potential to revolutionize medicine due to their ability to differentiate into specific lineages for targeted tissue repair. Development of materials and cell culture platforms that improve differentiation of either autologous or allogenic stem cell sources into specific lineages would enhance clinical utilization of MCSs. In this study, nanoscale amyloid fibrils were evaluated as substrate materials to encourage viability, proliferation, multipotency, and differentiation of MSCs. Fibrils assembled from the proteins lysozyme or ß-lactoglobulin, with and without chitosan coatings, were deposited on planar mica surfaces. MSCs were cultured and differentiated on fibril-covered surfaces, as well as on unstructured controls and tissue culture plastic. Expression of CD44 and CD90 proteins indicated that multipotency was maintained for all fibrils, and osteogenic differentiation was similarly comparable among all tested materials. MSCs grown for 7days on fibril-covered surfaces favored multicellular spheroid formation and demonstrated a >75% increase in adipogenesis compared to tissue culture plastic controls, although this benefit could only be achieved if MSCs were transferred to TCP for the final differentiation step. The largest spheroids and greatest tendency to undergo adipogenesis was evidenced among MSCs grown on fibrils coated with the positively-charged polysaccharide chitosan, suggesting that spheroid formation is prompted by both topography and cell-surface interactivity and that there is a connection between multicellular spheroid formation and adipogenesis.

Progress in bio-manufacture of platelets for transfusion.

Blood transfusion services face an ever-increasing demand for donor platelets to meet clinical needs. Whilst strategies for increasing platelet storage life and improving the efficiency of donor platelet collection are important, in the longer term, platelets generated by bio-manufacturing processes will be required to meet demands. Production of sufficient numbers of in vitro-derived platelets for transfusion represents a significant bioengineering challenge. In this review, we highlight recent progress in this area of research and outline the main technical and biological obstacles that need to be met before this becomes feasible and economic. A critical consideration is assurance of the functional properties of these cells as compared to their fresh, donor collected, counterparts. We contend that platelet-like particles and in vitro-derived platelets that phenotypically resemble fresh platelets must deliver the same functions as these cells upon transfusion. We also note recent progress with immortalized megakaryocyte progenitor cell lines, molecular strategies for reducing expression of HLA Class I to generate universal donor platelets and the move to early clinical studies with in vitro-derived platelets.

Endosteal-like extracellular matrix expression on melt electrospun written scaffolds.

Tissue engineering technology platforms constitute a unique opportunity to integrate cells and extracellular matrix (ECM) proteins into scaffolds and matrices that mimic the natural microenvironment in vitro. The development of tissue-engineered 3D models that mimic the endosteal microenvironment enables researchers to discover the causes and improve treatments for blood and immune-related diseases. The aim of this study was to establish a physiologically relevant in vitro model using 3D printed scaffolds to assess the contribution of human cells to the formation of a construct that mimics human endosteum. Melt electrospun written scaffolds were used to compare the suitability of primary human osteoblasts (hOBs) and placenta-derived mesenchymal stem cells (plMSCs) in (non-)osteogenic conditions and with different surface treatments. Using osteogenic conditions, hOBs secreted a dense ECM with enhanced deposition of endosteal proteins, such as fibronectin and vitronectin, and osteogenic markers, such as osteopontin and alkaline phosphatase, compared to plMSCs. The expression patterns of these proteins were reproducibly identified in hOBs derived from three individual donors. Calcium phosphate-coated scaffolds induced the expression of osteocalcin by hOBs when maintained in osteogenic conditions. The tissue-engineered endosteal microenvironment supported the growth and migration of primary human haematopoietic stem cells (HSCs) when compared to HSCs maintained using tissue culture plastic. This 3D testing platform represents an endosteal bone-like tissue and warrants future investigation for the maintenance and expansion of human HSCs. STATEMENT OF SIGNIFICANCE: This work is motivated by the recent interest in melt electrospinning writing, a 3D printing technique used to produce porous scaffolds for biomedical applications in regenerative medicine. Our team has been among the pioneers in building a new class of melt electrospinning devices for scaffold-based tissue engineering. These scaffolds allow structural support for various cell types to invade and deposit their own ECM, mimicking a characteristic 3D microenvironment for experimental studies. We used melt electrospun written polycaprolactone scaffolds to develop an endosteal bone-like tissue that promotes the growth of HSCs. We combine tissue engineering concepts with cell biology and stem cell research to design a physiologically relevant niche that is of prime interest to the scientific community.

Differentiation of human embryonic stem cells to HOXA+ hemogenic vasculature that resembles the aorta-gonad-mesonephros.

The ability to generate hematopoietic stem cells from human pluripotent cells would enable many biomedical applications. We find that hematopoietic CD34+ cells in spin embryoid bodies derived from human embryonic stem cells (hESCs) lack HOXA expression compared with repopulation-competent human cord blood CD34+ cells, indicating incorrect mesoderm patterning. Using reporter hESC lines to track the endothelial (SOX17) to hematopoietic (RUNX1C) transition that occurs in development, we show that simultaneous modulation of WNT and ACTIVIN signaling yields CD34+ hematopoietic cells with HOXA expression that more closely resembles that of cord blood. The cultures generate a network of aorta-like SOX17+ vessels from which RUNX1C+ blood cells emerge, similar to hematopoiesis in the aorta-gonad-mesonephros (AGM). Nascent CD34+ hematopoietic cells and corresponding cells sorted from human AGM show similar expression of cell surface receptors, signaling molecules and transcription factors. Our findings provide an approach to mimic in vitro a key early stage in human hematopoiesis for the generation of AGM-derived hematopoietic lineages from hESCs.

A thrombopoietin receptor antagonist is capable of depleting myelofibrosis hematopoietic stem and progenitor cells.

Recently, interactions between thrombopoietin (TPO) and its receptor, the myeloproliferative leukemia (MPL) virus oncogene, have been shown to play a role in the development and progression of myeloproliferative neoplasms including myelofibrosis (MF). These observations have led to the development of strategies to disrupt the association of TPO with its receptor as a means of targeting MF hematopoietic stem cells (HSCs) and hematopoietic progenitor cells (HPCs). In this report, we show that although both splenic and peripheral blood MF CD34(+) cells expressed lower levels of MPL than normal CD34(+) cells, TPO promoted the proliferation of MF CD34(+) cells and HPCs in a dose-dependent fashion. Furthermore, the treatment of MF but not normal CD34(+) cells with a synthesized MPL antagonist, LCP4, decreased the number of CD34(+)Lin(-) cells and all classes of assayable HPCs (colony-forming unit-megakaryocyte [CFU-MK], CFU-granulocyte/macrophage, burst-forming unit-erythroid/CFU-erythroid, and CFU-granulocyte/erythroid/macrophage/MK) irrespective of their mutational status. In addition, LCP4 treatment resulted in the depletion of the number of MF HPCs that were JAK2V617F(+) Moreover, the degree of human cell chimerism and the proportion of malignant donor cells were significantly reduced in immunodeficient mice transplanted with MF CD34(+) cell grafts treated with LCP4. These effects of LCP4 on MF HSCs/HPCs were associated with inhibition of JAK-STAT activity, leading to the induction of apoptosis. These findings demonstrate that such specific anti-cytokine receptor antagonists represent a new class of drugs that are capable of targeting MF HSCs.

Formation and characterisation of a modifiable soft macro-porous hyaluronic acid cryogel platform.

A facile method for the synthesis of cell supportive, highly macro-porous hyaluronic acid (HA) hydrogels via cryogelation is presented. Unmodified HA was chemically cross-linked via EDC/NHS zero-length cross-linking at sub-zero temperatures to yield cryogels with high porosity and high pore interconnectivity. The physical properties of the HA cryogels including porosity, average pore size, elasticity and swelling properties were characterised as a function of cryogelation conditions and composition of the precursor solution. The HA cryogels swell extensively in water, with the average porosities observed being ~90% under all conditions explored. The morphology of the cryogels can be controlled, allowing scaffolds with an average pore size ranging from 18 ± 2 to 87 ± 5 µm to be formed. By varying the cross-linking degree and HA concentration, a wide range of bulk elastic properties can be achieved, ranging from ~1 kPa to above 10 kPa. Preliminary cell culture experiments, with NIH 3T3 and HEK 293 cell lines, performed on biochemically modified and unmodified gels show the cryogels support cell proliferation and cell interactions, illustrating the biomedical potential of the platform.

Biomimetic mineralization of metal-organic frameworks as protective coatings for biomacromolecules.

Enhancing the robustness of functional biomacromolecules is a critical challenge in biotechnology, which if addressed would enhance their use in pharmaceuticals, chemical processing and biostorage. Here we report a novel method, inspired by natural biomineralization processes, which provides unprecedented protection of biomacromolecules by encapsulating them within a class of porous materials termed metal-organic frameworks. We show that proteins, enzymes and DNA rapidly induce the formation of protective metal-organic framework coatings under physiological conditions by concentrating the framework building blocks and facilitating crystallization around the biomacromolecules. The resulting biocomposite is stable under conditions that would normally decompose many biological macromolecules. For example, urease and horseradish peroxidase protected within a metal-organic framework shell are found to retain bioactivity after being treated at 80 °C and boiled in dimethylformamide (153 °C), respectively. This rapid, low-cost biomimetic mineralization process gives rise to new possibilities for the exploitation of biomacromolecules.

Brief Report: Factors Released by Megakaryocytes Thrombin Cleave Osteopontin to Negatively Regulate Hematopoietic Stem Cells.

Factor V (FV) and factor X (FX) activate and complex to form prothrombinase which subsequently cleaves prothrombin (PT), converting it to active thrombin. Thrombin cleaved osteopontin (tcOPN) contains a cryptic binding site for α4 ß1 and α9 ß1 integrins. We have previously shown that hematopoietic stem cells (HSC) bind to tcOPN via this site resulting in a decrease in their proliferation and differentiation. Therefore, tcOPN and the factors required for its generation are important components of the HSC niche. Herein we show mature megakaryocytes (MM, ≥8N) contain FV, FX, and PT mRNA and protein. Furthermore, we show 8N, 16N, 32N, and 64N MM all release the required factors to enable thrombin cleavage of OPN. Importantly, mice devoid of the myeloproliferative leukemia protein (Mpl), c-Mpl(-/-) mice, contain only approximately 10% of normal megakaryocyte numbers, showed significantly reduced FX and tcOPN protein levels in endosteal bone marrow (BM). In addition, WT hematopoietic progenitors and HSC showed reduced homing to the BM of c-Mpl(-/-) mice. This is the first report identifying MM as a key cellular component in the production of tcOPN in situ, allowing the BM microenvironment to self regulate HSC biology via tcOPN.

Predictions for optimal mitigation of paracrine inhibitory signalling in haemopoietic stem cell cultures.

INTRODUCTION: Recent studies in the literature have highlighted the critical role played by cell signalling in determining haemopoietic stem cell (HSC) fate within ex vivo culture systems. Stimulatory signals can enhance proliferation and promote differentiation, whilst inhibitory signals can significantly limit culture output. METHODS: Numerical models of various mitigation strategies are presented and applied to determine effectiveness of these strategies toward mitigation of paracrine inhibitory signalling inherent in these culture systems. The strategies assessed include mixing, media-exchange, fed-batch and perfusion. RESULTS: The models predict that significant spatial concentration gradients exist in typical cell cultures, with important consequences for subsequent cell expansion. Media exchange is shown to be the most effective mitigation strategy, but remains labour intensive and difficult to scale-up for large culture systems. The fed-batch strategy is only effective at very small Peclet number, and its effect is diminished as the cell culture volume grows. Conversely, mixing is effective at high Peclet number, and ineffective at low Peclet number. The models predict that cell expansion in fed-batch cultures becomes independent of increasing dilution rate, consistent with experimental results previously reported in the literature. In contrast, the models predict that increasing the flow rate in perfused cultures will lead to increased cell expansion, indicating the suitability of perfusion for use as an automated, tunable strategy. The effect of initial cell seeding density is also investigated, with the model showing that perfusion outperforms dilution for all densities considered. CONCLUSIONS: The models predict that the impact of inhibitory signalling in HSC cultures can be mitigated against using media manipulation strategies, with the optimal strategy dependent upon the protein diffusion time-scale relative to the media manipulation time-scale. The key messages from this study can be applied to any complex cell culture scenario where cell-cell interactions and paracrine signalling networks impact upon cell fate and cell expansion.

Immobilisation of a thrombopoietin peptidic mimic by self-assembled monolayers for culture of CD34+ cells.

Compared to soluble cytokines, surface-tethered ligands can deliver biological signalling with precise control of spatial positioning and concentration. A strategy that immobilises ligand molecules on a surface in a uniform orientation using non-cleavable linkages under physiological conditions would enhance the specific and systemic delivery of signalling in the local environment. We used mixed self-assembled monolayers (SAMs) of oxyamine- and oligo(ethylene glycol)-terminated thiols on gold to covalently install aldehyde- or ketone-functionalised ligands via oxime conjugation. Characterisation by electrochemistry and X-ray photoelectron spectroscopy showed quantitative immobilisation of the ligands on SAM surfaces. The thrombopoietin mimetic peptide, RILL, was immobilised on SAMs and the bioactivity of the substrate was demonstrated by culturing factor-dependent cells. We also optimised the immobilisation and wash conditions so that the peptide was not released into the culture medium and the immobilised RILL could be re-used for consecutive cell cultures. The surface also supported the growth of haematopoietic CD34+ cells comparable to the standard thrombopoietin-supplemented culture. Furthermore, the RILL-immobilised SAM surface was as effective in expanding uncommitted CD34+ cells as standard culture. The stimulatory effect of surface-tethered ligands in haematopoietic stem cell expansion supports the use of ligand immobilisation strategies to replicate the haematopoietic stem cell niche.

Melt electrospinning and its technologization in tissue engineering.

Melt electrospinning is an emerging fiber-based manufacturing technique that can be used to design and build scaffolds suitable for many tissue engineering (TE) applications. Contrary to the widely used solution electrospinning, the melt process is solvent-free and therefore volatility and toxicity issues associated with solvents can be avoided. Furthermore, molten polymers are often viscous and nonconductive, making them candidates for generating electrospinning jets without electrical instabilities. This in turn permits a precise and predictable fiber deposition in the combination with moving collectors, termed melt electrospinning writing (MEW), allows the layer-by-layer fabrication of small to large volume scaffolds with specific designs, shapes and thicknesses. In vitro studies have demonstrated that scaffolds designed and fabricated via MEW can support cell attachment, proliferation and extracellular matrix formation, as well as cell infiltration throughout the thickness of the scaffold facilitated by the large pores and pore interconnectivity. Moreover, in vivo studies show that scaffolds designed for specific tissue regeneration strategies performed superbly. This review describes the state-of-the-art and unique perspectives of melt electrospinning and its writing applied to scaffold-based TE.

FOXN1 (GFP/w) reporter hESCs enable identification of integrin-ß4, HLA-DR, and EpCAM as markers of human PSC-derived FOXN1(+) thymic epithelial progenitors.

Thymic epithelial cells (TECs) play a critical role in T cell maturation and tolerance induction. The generation of TECs from in vitro differentiation of human pluripotent stem cells (PSCs) provides a platform on which to study the mechanisms of this interaction and has implications for immune reconstitution. To facilitate analysis of PSC-derived TECs, we generated hESC reporter lines in which sequences encoding GFP were targeted to FOXN1, a gene required for TEC development. Using this FOXN1 (GFP/w) line as a readout, we developed a reproducible protocol for generating FOXN1-GFP(+) thymic endoderm cells. Transcriptional profiling and flow cytometry identified integrin-ß4 (ITGB4, CD104) and HLA-DR as markers that could be used in combination with EpCAM to selectively purify FOXN1(+) TEC progenitors from differentiating cultures of unmanipulated PSCs. Human FOXN1(+) TEC progenitors generated from PSCs facilitate the study of thymus biology and are a valuable resource for future applications in regenerative medicine.

Biomanufacture of human platelets for transfusion: Rationale and approaches.

Platelets for transfusion obtained from volunteer blood donors are a limited resource. Given the increased range of donor restrictions to prevent transmission of disease and the decline in volunteer blood donors, there is a diminishing supply of blood for transfusion. Production of mature blood cells from hematopoietic stem cells via large-scale manufacture is an alternative way of meeting transfusion demands. In this review, we provide a detailed outline of the challenges and opportunities for the biomanufacture of platelets. We describe the scale required for platelet biomanufacture to deliver sufficient cells for transfusion, provide a brief outline of the current understanding of megakaryopoiesis and thrombogenesis, and highlight how the current understanding impacts the design of culture systems and bioreactors for producing platelets.

Design, synthesis and binding properties of a fluorescent α9ß1/α4ß1 integrin antagonist and its application as an in vivo probe for bone marrow haemopoietic stem cells.

The α9ß1 and α4ß1 integrin subtypes are expressed on bone marrow haemopoietic stem cells and have important roles in stem cell regulation and trafficking. Although the roles of α4ß1 integrin have been thoroughly investigated with respect to HSC function, the role of α9ß1 integrin remains poorly characterised. Small molecule fluorescent probes are useful tools for monitoring biological processes in vivo, to determine cell-associated protein localisation and activation, and to elucidate the mechanism of small molecule mediated protein interactions. Herein, we report the design, synthesis and integrin-dependent cell binding properties of a new fluorescent α9ß1 integrin antagonist (R-BC154), which was based on a series of N-phenylsulfonyl proline dipeptides and assembled using the Cu(I)-catalyzed azide alkyne cycloaddition (CuAAC) reaction. Using transfected human glioblastoma LN18 cells, we show that R-BC154 exhibits high nanomolar binding affinities to α9ß1 integrin with potent cross-reactivity against α4ß1 integrin under physiological mimicking conditions. On-rate and off-rate measurements revealed distinct differences in the binding kinetics between α9ß1 and α4ß1 integrins, which showed faster binding to α4ß1 integrin relative to α9ß1, but more prolonged binding to the latter. Finally, we show that R-BC154 was capable of binding rare populations of bone marrow haemopoietic stem and progenitor cells when administered to mice. Thus, R-BC154 represents a useful multi-purpose fluorescent integrin probe that can be used for (1) screening small molecule inhibitors of α9ß1 and α4ß1 integrins; (2) investigating the biochemical properties of α9ß1 and α4ß1 integrin binding and (3) investigating integrin expression and activation on defined cell phenotypes in vivo.

Megakaryocytes co-localise with hemopoietic stem cells and release cytokines that up-regulate stem cell proliferation.

We report transplanted hemopoietic stem cells (HSC) preferentially lodge within two cells of mature megakaryocytes (MM). With both populations comprising ~0.2% of bone marrow cells, this strongly suggests a key functional interaction. HSC isolated from the endosteum (eLSKSLAM) showed significantly increased hemopoietic cell proliferation while in co-culture with MM. Furthermore, eLSKSLAM progeny retained HSC potential, maintaining long-term multi-lineage reconstitution capacity in lethally ablated recipients. Increased hemopoietic cell proliferation was not MM contact dependent and could be recapitulated with media supplemented with two factors identified in MM-conditioned media: insulin-like growth factor binding protein-3 (IGFBP-3) and insulin-like growth factor-1 (IGF-1). We demonstrate that HSC express the receptor for IGF-1 and that IGF-1/IGFBP-3 induced increased hemopoietic cell proliferation can be blocked by an anti-IGF-1 neutralising antibody. However, co-cultures of 8N, 16N or 32N MM with eLSKSLAM showed that MM of individual ploidy did not significantly increase hemopoietic cell proliferation. Our data suggests that MM are an important component of the HSC niche and regulate hemopoietic cell proliferation through cytokine release.

Potent agonists of a hematopoietic stem cell cytokine receptor, c-Mpl.

Several growth factors feature prominently in the control of hematopoiesis. Thrombopoietin, a class I hematopoietic cytokine, plays critical roles in regulating hematopoietic stem cell numbers and also stimulates the production and differentiation of megakaryocytes, the bone marrow cells that ultimately produce platelets. Thrombopoietin interacts with the c-Mpl cell-surface receptor. Recently, several peptide and small-molecule agonists and antagonists of c-Mpl have been reported. We conducted a bioinformatics and molecular modeling study aimed at understanding the agonist activities of peptides that bind to c-Mpl, and developed new potent peptide agonists with low nanomolar activity. These agonists also show very high activity in human CD34(+) primary cell cultures, and doubled the mean blood platelet counts when injected into mice.

Cryogels for biomedical applications.

The use of hydrogels as support materials for the growth and proliferation of mammalian cells has been well documented as they closely mimic the gel-like properties - and in some cases also the chemical properties - of the extracellular matrix (ECM), which naturally surrounds the cells of any biological tissue. Macro-porous hydrogels set below the freezing point of the solvent, so-called 'cryogels', have recently gained significant interest in the fields of tissue engineering and in vitro cell culture, thanks to their inherent interconnected macro-porous structure and ease of formation in comparison to other macro-pore forming techniques. This review highlights recent advances in cryogelation techniques and starting materials that can be utilised to synthesise biocompatible and biologically relevant cryogels as well as discussing physicochemical characterisation techniques for these materials. Lastly, emerging trends in the application of cryogels, particularly as three-dimensional ECM mimicking scaffolds for cell culture and tissue engineering, are discussed.

Granulocyte colony stimulating factor expands hematopoietic stem cells within the central but not endosteal bone marrow region.

Granulocyte colony stimulating factor (G-CSF) is clinically well established for the mobilization of hematopoietic stem cells (HSC). Extensive data on the underlying mechanism of G-CSF induced mobilization is available; however, little is known regarding the functional effect of G-CSF on HSC within the bone marrow (BM). In this study we analyzed the proportion and number of murine HSC in the endosteal and central bone marrow regions after 4 days of G-CSF administration. We demonstrate that the number of HSC, defined as CD150(+)CD48(-)LSK cells (LSKSLAM cells), increased within the central BM region in response to G-CSF, but not within the endosteal BM region. In addition the level of CD150 and CD48 expression also increased on cells isolated from both regions. We further showed that G-CSF mobilized proportionally fewer LSKSLAM compared to LSK cells, mobilized LSKSLAM had colony forming potential and the presence of these cells can be used as a measure for mobilization efficiency. Together we provide evidence that HSC in the BM respond differently to G-CSF and this is dependent on their location. These findings will be valuable in developing new agents which specifically mobilize HSC from the endosteal BM region, which we have previously demonstrated to have significantly greater hematopoietic potential compared to their phenotypically identical counterparts located in other regions of the BM.