ABSTRACT
Orthogonal chirp division multiplexing (OCDM) offers a promising modulation technology for shallow water underwater acoustic (UWA) communication systems due to multipath fading resistance and Doppler resistance. To handle the various channel distortions and interferences, obtaining accurate channel state information is vital for robust and efficient shallow water UWA communication. In recent years, deep learning has attracted widespread attention in the communication field, providing a new way to improve the performance of physical layer communication systems. In this paper, the pilot-based channel estimation is transformed into a matrix completion problem, which is mathematically equivalent to the image super-resolution problem arising in the field of image processing. Simulation results show that the deep learning-based method can improve the channel distortion, outperforming the equalization performed by traditional estimator, the performance of Bit Error Rate is improved by 2.5 dB compared to the MMSE method in OCDM system. At the 7.5 to 20 dB region, it achieves better bit error rate performance than OFDM systems, and the bit error rate is reduced by approximately 53% compared to OFDM when the SNR value is 20, which is very useful in shallow water UWA channels with multipath extension and severe time-varying characteristics.
ABSTRACT
High-accuracy level underwater acoustical surveying plays an important role in ocean engineering applications, such as subaqueous tunnel construction, oil and gas exploration, and resources prospecting. This novel imaging method is eager to break through the existing theory to achieve a higher accuracy level of surveying. Multibeam Synthetic Aperture Sonar (MBSAS) is a kind of underwater acoustical imaging theory that can achieve 3D high-resolution detecting and overcome the disadvantages of traditional imaging methods, such as Multibeam Echo Sounder (MBES) and Synthetic Aperture Sonar (SAS). However, the resolution in the across-track direction inevitably decreases with increasing range, limited by the beamwidth of the transducer array of MBES. Furthermore, the sidelobe problem is also a significant interference of imaging sonar that introduces image noise and false peaks, which reduces the accuracy of the underwater images. Therefore, we proposed an accelerated deconvolved MBSAS beamforming method that introduces exponential acceleration and vector extrapolation to improve the convergence velocity of the classical Richardson-Lucy (R-L) iteration. The method proposed achieves a narrow beamwidth with a high sidelobe ratio in a few iterations. It can be applied to actual engineering applications, which breaks through the limitation of the actual transducer array scale. Simulations, tank, and field experiments also demonstrate the feasibility and advantages of the method proposed. 3D high-accuracy level underwater acoustical surveying can be achieved through this 2D MBES transducer array system, which can be widely promoted in the field of underwater acoustical remote sensing.
ABSTRACT
The arriving-angle structure for the forward scattered wave on a vertical line array is obtained upon a modified scattering model in the Pekeris waveguide. The structure is investigated and interpreted by the array invariant theory combined with target induced modal coupling effect. Compared with that of the direct blast, the arriving-angle structure of the forward scattering wave owns multi-striations as well as an increased vertical array invariant. The forward scattered angle structure is dependent on the target position on the source-receiver line. Simulations indicate a potential separation for the forward scattered wave overwhelmed by the direct blast.
ABSTRACT
Forward scattered waves are always overwhelmed by severely intense direct blasts when a submerged target crosses the source-receiver line. A processing scheme called direct blast suppression based on adaptive filtering (DBS-AF) is proposed to suppress such blasts. A verification experiment was conducted in a lake with a vertical hydrophone array and 10 kHz CW impulses. Processing results show that the direct blast is suppressed in a single channel, and an intruding target is identified by the lobes in the detection curve. The detection performance is improved by adopting a time-delay beam-former on the array as a pre-processing technique.
