Ion-Selective Metathesis Design of Flow-Electrode Capacitive Deionization for Energy-Saving and Anti-Scaling Softening of Brackish Water.

While flow-electrode capacitive deionization (FCDI) is recognized as an attractive desalination technology, its practical implementation has been hindered by the ease of scaling and energy-intensive nature of the single-cell FCDI system, particularly when treating brackish water with elevated levels of naturally coexisting SO42- and Ca2+. To overcome these obstacles, we propose and design an innovative ion-selective metathesis FCDI (ISM-FCDI) system, consisting of a two-stage tailored cell design. Results indicate that the specific energy consumption per unit volume of water for the ISM-FCDI is lower (by up to ∼50%) than that of a conventional single-stage FCDI due to the parallel circuit structure of the ISM-FCDI. Additionally, the ISM-FCDI benefits from a conspicuous disparity in the selective removal of ions at each stage. The separate storage of Ca2+ and SO42- by the metathesis process in the ISM-FCDI (46.25% Ca2+, 14.25% SO42- in electrode 1 and 4.75% Ca2+, 35.25% SO42- in electrode 2) can effectively prevent scaling. Furthermore, configuration-performance analysis on the ion-selective migration suggests that the properties of the ion exchange membrane, rather than the carbon species, govern the selectivity of ion removal. This work introduces system-level enhancements aimed at enhancing energy conservation and scaling prevention, providing critical optimization of the FCDI for brackish water softening.

Pulsed electric field drives chemical-free membrane stripping for high ammonia recovery from urine.

Recovering ammonia from waste streams (e.g., urine) is highly desirable to reduce natural gas-based NH3 production and nitrogen discharge into the water environment. Electrochemical membrane stripping is an attractive alternative because it can drive NH4+ transformation to NH3 via cathodic OH- production; however, the conventional configurations suffer from relatively low ammonia recovery (<80 %) and significant acid/material usage for ammonia adsorption. To this end, we develop a novel stack system that simply uses an oxygen evolution reaction to in-situ produce acid from water, enabling chemical-free ammonia recovery from synthetic urine. In batch mode, the percentage removal and recovery increased respectively from 74.5 % to 97.9 % and 81.8 % to 92.7 % when the electrode pairs increased from 2 to 4 in the stack system. To address the gas-sparging issue that deteriorated ammonia recovery in continuous operation, pulsed electric field (PEF) mode was applied, resulting in ∼100 % recovery under optimized conditions. At an ammonia removal rate of 35.1 g-N m-2 h-1 and electrical energy consumption of 28.9 kWh kg-N-1, our chemical-free system in PEF mode has achieved significantly higher ammonia recovery (>90 %) from synthetic urine. The total cost to recover 1 kg of NH3-N from real human urine was $15.9 in the proposed system. Results of this study demonstrate that this novel approach holds great promise for high ammonia recovery from waste streams, opening a new pathway toward sustainable nitrogen management.

Two-photon AMPK and ATP imaging reveals the bias between rods and cones in glycolysis utility.

In vertebrates, retinal rod and cone photoreceptor cells rely significantly on glycolysis. Lactate released from photoreceptor cells fuels neighboring retinal pigment epithelium cells and Müller glial cells through oxidative phosphorylation. To understand this highly heterogeneous metabolic environment around photoreceptor cells, single-cell analysis is needed. Here, we visualized cellular AMP-activated protein kinase (AMPK) activity and ATP levels in the retina by two-photon microscopy. Transgenic mice expressing a hyBRET-AMPK biosensor were used for measuring the AMPK activity. GO-ATeam2 transgenic mice were used for measuring the ATP level. Temporal metabolic responses were successfully detected in the live retinal explants upon drug perfusion. A glycolysis inhibitor, 2-deoxy-d-glucose (2-DG), activated AMPK and reduced ATP. These effects were clearly stronger in rods than in cones. Notably, rod AMPK and ATP started to recover at 30 min from the onset of 2-DG perfusion. Consistent with these findings, ex vivo electroretinogram recordings showed a transient slowdown in rod dim flash responses during a 60-min 2-DG perfusion, whereas cone responses were not affected. Based on these results, we propose that cones surrounded by highly glycolytic rods become less dependent on glycolysis, and rods also become less dependent on glycolysis within 60 min upon the glycolysis inhibition.